SEARCH · Engineering Papers

Results for “THREE-DIMENSIONAL MOTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Three-dimensional separation and reattachment

The separation of three dimensional turbulent boundary layers from the lee of flight vehicles at high angles of attack is investigated. The separation results in dominant, large scale, coiled vortex motions that pass along the body in the general direction of the free stream. In all cases of three dimensional flow separation and reattachment, the assumption of continuous vector fields of skin friction lines and external flow streamlines, coupled with simple laws of topology, provides a flow grammar whose elemental constituents are the singular points: the nodes, spiral nodes (foci), and saddles. The phenomenon of three dimensional separation may be constrained as either a local or a global event, depending on whether the skin friction line that becomes a line of separation originates at a node or a saddle point.

Peake, D. J.↗

NASA NTRS1982

An experimental investigation of the vaporous/gaseous cavity characteristics of an eccentric journal bearing

This paper describes the experimental pressure and temperature results obtained when rotating a shaft in an eccentric lucite casing at velocities ranging from 209 to 628 rad/s (2000 to 6000 rpm). The results are presented in terms of three-dimensional plots and contour maps. Photographic evidence is presented to illustrate how the downstream and upstream regions of the cavity develop and evolve into the well-known finger patterns. A comparison between pressure and temperature profiles in air-saturated oil and carbon dioxide-saturated oil is presented; the origin and nature of the gases contained in the cavity are discussed. Three analytical models (Swift-Stieber, separation, Floberg) predicting the formation of the cavitation zone are presented and evaluated in light of the experimental results. A motion-picture supplement depicting these results is available upon request.

Braun, M. J.↗

NASA NTRS1983

Numerical solution of three-dimensional unsteady transonic flow over wings including inviscid/viscous interactions

A numerical procedure is presented for computing the unsteady transonic flow field about three dimensional swept wings undergoing general time dependent motion. The outer inviscid portion of the flow is assumed to be governed by the modified unsteady transonic small disturbance potential equation which is integrated in the time domain by means of an efficient alternating direction implicit approximate factorization algorithm. Gross dominant effects of the shock boundary layer interaction are accounted for by a simple empirically defined model. Viscous flow regions adjacent to the wing surface and in the trailing wake are described by a set of integral equations appropriate for compressible turbulent shear layers. The two dimensional boundary layer equations are applied quasi-statically stripwise across the span. Coupling with the outer inviscid flow is implemented through use of the displacement thickness concept within the limitations of small disturbance theory. Validity of the assumptions underlying the method is established by comparison with experimental data for the flow about a high aspect ratio transport wing having an advanced airfoil section.

Rizzetta, D. P.↗

NASA NTRS1983

Cumulus clouds - Numerical models, observations and entrainment

The first computer simulation of the organization phase of a buoyant atmospheric thermal is described. Although crude, it showed the spontaneous development of a rounded tight-gradient 'cap' and internal vortical circulation. The complexities involved in these 'field of motion' models in part motivated the development of entity models, based upon laboratory thermals. These one-dimensional models and their uses with observations are briefly described as well as their limitations. Finally, an application of Schlesinger's three-dimensional model to a GATE cumulus situation clarifies many apparently conflicting observations and postulates, thereby raising further challenging questions to be addressed jointly by the more sophisticated measuring and modeling tools available in the 1980's.

Simpson, J.↗

NASA NTRS1986

Predicting the Dynamic Behavior of High-Speed Roller Bearings

Computer program developed for solving nonlinear differential equations of motion of high-speed, lightly loaded, cylindrical roller bearing. Program organized into three major parts: Main program, controls input and output; differential equation solver; and subroutines, used to evaluate vector function. Program has capability of performing either twodimensional or three-dimensional simulation.

Conry, T. F.↗

NASA NTRS1985

Unsteady transonic flow calculations for two-dimensional canard-wing configurations with aeroelastic applications

Unsteady transonic flow calculations for aerodynamically interfering airfoil configurations are performed as a first-step toward solving the three-dimensional canard-wing interaction problem. These calculations are performed by extending the XTRAN2L two-dimensional unsteady transonic small-disturbance code to include an additional airfoil. Unsteady transonic forces due to plunge and pitch motions of a two-dimensional canard and wing are presented. Results for a variety of canard-wing separation distances reveal the effects of aerodynamic interference on unsteady transonic airloads. Aeroelastic analyses employing these unsteady airloads demonstrate the effects of aerodynamic interference on aeroelastic stability and flutter. For the configurations studied, increases in wing flutter speed result with the inclusion of the aerodynamically interfering canard.

Batina, J. T.↗

NASA NTRS1985

A factored implicit scheme for numerical weather prediction

An implicit method is proposed to factor the nonlinear partial differential equations governing fast and slow modes of dynamic motion in numerical weather prediction schemes. The method permits separate factorization of the slow and fast modes of the implicit operator. A simple two-dimensional version of the system of three-dimensional equations governing atmospheric dynamics over shallow water was analyzed to assess the accuracy of the proposed method. It is shown that the method has a small error which is comparable to other discretization errors in the overall scheme.

Augenbaum, J. M.↗

NASA NTRS1986

Shock wave/turbulent boundary layer interaction in the flow field of a tri-dimension wind tunnel

The first results of a thorough experimental analysis of a strong three-dimensional shock-wave/turbulent boundary-layer interaction occurring in a three dimensional transonic channel are presented. The aim of this experiment is to help in the physical understanding of a complex field, including several separations, and to provide a well documented case to test computational methods. The flowfield has been probed in many points by means of a three-component laser Doppler velocimeter. The results presented relate only to the mean velocity field. They clearly show the formation in the flow of a strong vortical motion resulting from the shock wave interaction.

Benay, R.↗

NASA NTRS1987

Unsteady three-dimensional simulation of VTOL upwash fountain turbulence

Numerical simulations of a planar turbulent wall jet and a planar VTOL upwash fountain were performed. These are three dimensional simulations which resolve large scale unsteady motions in the flows. The wall jet simulation shows good agreement with experimental data and is presented to verify the simulation methodology. Simulation of the upwash fountain predicts elevated shear stress and a half velocity width spreading rate of 33% which agrees well with experiment. Turbulence mechanisms which contribute to the enhanced spreading rate are examined.

Childs, Robert E.↗

NASA NTRS1986

A three-dimensional model of the nucleus of Comet Halley

The nucleus of comet Halley was observed by the Halley Multicolor Camera (HMC) during the last minutes of the flyby sequence before reaching the point of closest approach. The phase angle change during the observational period was less than 17 deg, so HMC data can only define a two-dimensional contour of the nucleus at a certain time. The overall geometry during the HMC observations is outlined and the findings are related to information available from other sources at different times. The nucleus of the comet is described as a triaxial ellipsoid with major axes of 16, 10, and 9 km. The rotation axis is directed towards delta 1950 = -(40 + or - 5) deg and alpha 1950 = (50 + or - 10) deg. The rotation with a period of P = (54 + or - 1) is in a prograde sense with respect to the orbital motion.

Wilhelm, K.↗

NASA NTRS1987

Simultaneous measurements of the thermospheric wind profile at three separate positions in the dusk auroral oval

In the present three-dimensional wind field observations in the dusk auroral oval, the F region winds appear to be at the transition from a clockwise vortex centered at dusk to an antisunward flow at the nightside of the polar cap, while the E region winds seem to be part of a gravity wave with a wind amplitude of 125 m/sec. The wave period is found to be close to three hours, on the basis of the ratio of the magnitude of the wind component normal to the direction of wave propagation to the magnitude parallel to the direction of propagation. The observations show that significant energy resides in the divergent motions that are part of the transient response in the E region, at least in this case.

Mikkelsen, I. S.↗

NASA NTRS1987

Towards building a team of intelligent robots

Topics addressed include: collision-free motion planning of multiple robot arms; two-dimensional object recognition; and pictorial databases (storage and sharing of the representations of three-dimensional objects).

Varanasi, Murali R.↗

NASA NTRS1987

Third-order resonance effects and the nonlinear stability of drop oscillations

The three-dimensional nonlinear oscillations of an isolated, inviscid drop with surface tension are studied by a multiple timescale analysis and pre-averaging applied to the variational principle for the appropriate Lagrangian. Amplitude equations are derived which describe the generic cubic resonance caused by the spatial degeneracy of the eigenfrequencies of the linear normal modes. This resonant coupling leads to the instability of the finite amplitude axisymmetric oscillations to small nonaxisymmetric perturbations, as is demonstrated here for the three- and four-lobed normal modes. Solutions to the interaction equations that describe finite amplitude, nonaxisymmetric traveling-wave solutions are also obtained and their stability is investigated. A nongeneric cubic resonance between the two-lobed and four-lobed oscillatory modes leads to quasi-periodic motions.

Natarajan, Ramesh↗

NASA NTRS1988

Application of unsteady aerodynamic methods for transonic aeroelastic analysis

Aerodynamic methods for aeroelastic analysis are applied to various flow problems. These methods include those that solve the three-dimensional transonic small disturbance (TSD) potential equation, the two-dimensional full potential (FP) equation, and the thin-layer Navier-Stokes equations. Flutter analysis performed using TSD aerodynamics shows that such methods can be used to analyze some aeroelastic phenomena. For thicker bodies and larger amplitude motions a nonisentropic full potential method is presented.

Whitlow, Woodrow, Jr.↗

NASA NTRS1989

Coherent structures in transitional and turbulent free shear flows

The development of a quantitative understanding of large-scale coherent structures in shear flows has led to the recognition of their evolutionary features and 'rules' of nonlinear interaction among each other. These determinations, in conjunction with the study of fine-grained turbulence and mean motion, constitute a general view of hydrodynamical instabilities that has resulted in useful concepts for the achievement of shear-flow control. The dynamical role of longitudinal structures in free shear flows is presently exemplified by the axisymmetric and helical modes in a round jet, which resemble the two-dimensional and spanwise-periodic three-dimensional modes in a two-dimensional mean flow.

Liu, J. T. C.↗

NASA NTRS1989

The secondary flow and its stability for natural convection in a tall vertical enclosure

The multicellular flow between two vertical parallel plates is numerically simulated using a time-splitting pseudospectral method. The steady flow of air and the time-periodic flow of oil are investigated, and descriptions of these flows using both physical and spectral approaches are presented. The time dependence of the flow and temperature fields of oil are shown, and the dynamics of the process is discussed. The spectral transfer of energy among the axial modes comprising the flow is explored. The three-dimensional linear stabiltiy of the multicellular air flow is parametrically studied. The domain of stable two-dimensional cellular motion is found to be constrained by the Eckhaus instability and by two types of monotone instability. The two-dimensional multicellular flow is unstable above a Grashof number of about 8550.

Chait, Arnon↗

NASA NTRS1988

Vertically reciprocating auger

The mathematical model and test results developed for the Vertically Reciprocating Auger (VRA) are summarized. The VRA is a device capable of transporting cuttings that result from below surface drilling. It was developed chiefly for the lunar surface, where conventional fluid flushing while drilling would not be practical. The VRA uses only reciprocating motion and transports material through reflections with the surface above. Particles are reflected forward and land ahead of radially placed fences, which prevent the particles from rolling back down the auger. Three input wave forms are considered to drive the auger. A modified sawtooth wave form was chosen for testing, over a modified square wave or sine wave, due to its simplicity and effectiveness. The three-dimensional mathematical model predicted a sand throughput rate of 0.2667 pounds/stroke, while the actual test setup transported 0.075 pounds/stroke. Based on this result, a correction factor of 0.281 is suggested for a modified sawtooth input.

Etheridge, Mark↗

NASA NTRS1989

Three-dimensional viscous drag prediction for rotor blades

The state-of-the-art in rotor blade drag prediction involves the use of two-dimensional airfoil tables to calculate the drag force on the blade. One of the most serious problems with the current methods is that they cannot be used for airfoils that have yet to be tested. Most of the drag prediction methods also do not take the Reynolds number or the rotational effects of the blade into account, raising doubts about the accuracy of the results. These problems are addressed with the development of an analytical method which includes the shape of airfoil, the effects of Reynolds number, and the rotational motion of the blade.

Chen, Ching S.↗