Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Supersonic compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Method of characteristics for supersonic flow of a guiding centre plasma.

A study of the compressive magneto-acousic waves in a guiding centre plasma shows that the wavefront that emerges point disturbance after a finite time is a simple oblate spheroid with the axis of revolution parallel to the field lines. Thus, in a steady three-dimensional supersonic flow of guiding centre plasma a simple analytic exprencan be obtained to represent the characteristic surfaces. From a proper linear combination of the governing macroscopic equations, the characteristic equation is obtained. It represents the propagation of disturbances on the characteristic surface. The characteristic theory can be used to study the interaction of the solar wind with the moon and possibly with other planetary bodies.

Whang, Y. C.↗

Numerical experiments in supersonic boundary-layer stability

The three-dimensional (3-D) time-dependent compressible Navier-Stokes equations are numerically solved by a Fourier-Chebyshev collocation method to study the stability of supersonic flows over a flat plate. Several direct simulations carried out in this study suggest the existence of a secondary instability that might provide a route to transition. The interaction of the modes involved in the secondary instability is possibly amenable to a Floquet-type analysis. Pertinent differences between this instability and the analogous incompressible K-type secondary instability are pointed out. Some preliminary results of a 2-D direct simulation of the nonlinear evolution of a second mode perturbation wave are also discussed.

Erlebacher, Gordon↗

Experiments on supersonic turbulent flow development in a square duct

The nature of supersonic, turbulent, adiabatic-wall flow in a square duct is investigated experimentally over a development length of x/D between 0 and 20 for a uniform flow, Mach 3.9 condition at the duct inlet. Initial discussion centers on the duct configuration itself, which was designed specifically to minimize wave effects and nozzle-induced distortion in the flow. Total pressure contours and local skin friction coefficient distributions are presented which show that the flow develops in a manner similar to that observed for the incompressible case. In particular, undulations exist in total pressure contours within the cross plane and in transverse skin friction coefficient distributions, which are indicative of the presence of a well-defined secondary flow superimposed upon the primary flow. The results are analyzed to show that local law-of-the-wall behavior extends well into the corner region, which implies that wall functions conventionally applied in two-equation type turbulence models, when suitably defined for compressible flow, may also be applied to supersonic streamwise corner flows.

Gessner, F. B.↗

Observation of single-mode, Kelvin-Helmholtz instability in a supersonic flow

This manuscript reports the first observations of the Kelvin-Helmholtz instability evolving from well-characterized seed perturbations in a steady, supersonic flow. The Kelvin-Helmholtz instability occurs when two fluids move parallel to one another at different velocities, and contributes to an intermixing of fluids and transition to turbulence. It is ubiquitous in nature and engineering, including terrestrial systems such as cloud formations, astrophysical systems such as supernovae, and laboratory systems such as fusion experiments. In a supersonic flow, the growth rate of the instability is inhibited due to effects of compressibility. These effects are still not fully understood, and hold the motivation for the current work. The data presented here were obtained by developing a novel experimental platform capable of sustaining a steady shockwave over a precision-machined interface for unprecedented durations. The chosen interface was a well-characterized, single-mode sine wave, allowing us to document the evolution of individual vortices at high resolution. Understanding the behavior of individual vortices is the first of two fundamental steps towards developing a comprehensive model for the Kelvin-Helmholtz instability in a compressible flow. The results of this experiment were well reproduced with 2D hydrodynamic simulations. The platform has been extended to additional experiments, which study the evolution of different hydrodynamic instabilities in steady, supersonic flows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Use of a Stanton Tube for Skin-Friction Measurements

A small total-pressure tube resting against a flat-plate surface was used as a Stanton tube and calibrated as a skin-friction meter at various subsonic and supersonic speeds. Laminar flow was maintained for the supersonic runs at a Mach number M(sub infinity) of 2. At speeds between M(sub infinity) = 1.33 and M(sub infinity) = 1.87, the calibrations were carried-out in a turbulent boundary layer. The subsonic flows were found to be in transition. The skin-friction readings of a floating-element type of balance served as the reference values against which the Stanton tube was calibrated. A theoretical model was developed which, for moderate values of the shear parameter tau, accurately predicts the performance of the Stanton tube in subsonic and supersonic flows. A "shear correction factor" was found to explain the deviations from the basic model when T became too large. Compressibility effects were important only in the case of turbulent supersonic flows, and they did not alter the form of the calibration curve. The test Reynolds numbers, based on the distance from the leading edge and free-stream conditions, ranged from 70,000 to 875,000. The turbulent-boundary-layer Reynolds numbers, based on momentum thickness, varied between 650 and 2,300. Both laminar and turbulent velocity profiles were taken and the effect of pressure gradient on the calibration was investigated.

Abarbanel, S. S.↗

Second-order closure models for supersonic turbulent flows

Recent work on the development of a second-order closure model for high-speed compressible flows is reviewed. This turbulent closure is based on the solution of modeled transport equations for the Favre-averaged Reynolds stress tensor and the solenoidal part of the turbulent dissipation rate. A new model for the compressible dissipation is used along with traditional gradient transport models for the Reynolds heat flux and mass flux terms. Consistent with simple asymptotic analyses, the deviatoric part of the remaining higher-order correlations in the Reynolds stress transport equations are modeled by a variable density extension of the newest incompressible models. The resulting second-order closure model is tested in a variety of compressible turbulent flows which include the decay of isotropic turbulence, homogeneous shear flow, the supersonic mixing layer, and the supersonic flat-plate turbulent boundary layer. Comparisons between the model predictions and the results of physical and numerical experiments are quite encouraging.

Speziale, Charles G.↗

Direct simulation of isothermal-wall supersonic channel flow

The motivation for this work is the fact that in turbulent flows where compressibility effects are important, they are often poorly understood. A few examples of such flows are those associated with astrophysical phenomena and those found in combustion chambers, supersonic diffusers and nozzles, and over high-speed airfoils. For this project, we are primarily interested in compressibility effects near solid surfaces. Our main objective is an improved understanding of the fundamentals of compressible wall-bounded turbulence, which can in turn be used to cast light upon modeling concepts such as the Morkovin hypothesis and the Van Driest transformation. To this end, we have performed a direct numerical simulation (DNS) study of supersonic turbulent flow in a plane channel with constant-temperature walls. All of the relevant spatial and temporal scales are resolved so that no sub grid scale or turbulence model is necessary. The channel geometry was chosen so that finite Mach number effects can be isolated by comparing the present results to well established incompressible channel data. Here the fluid is assumed to be an ideal gas with constant specific heats, constant Prandtl number, and power-law temperature-dependent viscosity. Isothermal-wall boundary conditions are imposed so that a statistically stationary state may be obtained. The flow is driven by a uniform (in space) body force (rather than a mean pressure gradient) to preserve stream wise homogeneity, with the body force defined so that the total mass flux is constant.

Coleman, Gary N.↗

Turbulence measurements in a transonic boundary layer and free-shear flow using laser velocimetry and hot-wire anemometry techniques

Quantitative measurements of the turbulence fluctuations in velocity and mass flux have been obtained in Mach 0.6 and 0.8 turbulent boundary layer and free-shear layer flows by laser velocimetry and hot-wire anemometry techniques. To evaluate the effects of compressibility, these transonic data are compared to available incompressible and supersonic results. Based on some simplifying assumptions, estimates of the rms density fluctuations are made for which error bounds are given. In addition to these fluctuation data, the compressible mean velocity data obtained with the laser velocimeter are presented and compared to pitot tube results. The investigation was conducted in the Ames 6- by 6-Foot Supersonic Wind Tunnel at free-stream Mach numbers of 0.6 and 0.8 for a unit Reynolds number of about 10,000,000 per meter.

Johnson, D. A.↗

Subsonic and supersonic indicial aerodynamics and aerodynamic transfer function for complex configurations

A general theory for indicial-potential-compressible aerodynamics around complex configurations is presented. The motion is assumed to consist of constant subsonic or supersonic speed (steady state) and small perturbations around the steady state. Using the finite-element method to discretize the space problem, a set of differential-difference equations in time relating the potential to its normal derivative on the surface of the body was obtained. The aerodynamics transfer function was derived by using standard method of operational calculus.

Morino, L.↗

Some effects of cruise speed and engine matching of supersonic inlet design

An analytical study was conducted to determine the impact of flight Mach number on inlet type selection for a supersonic cruise aircraft. External and mixed-compression axisymmetric and two-dimensional inlets were considered. The internal contraction of the mixed-compression inlets was limited to achieve self-starting. At Mach 2.0, the axisymmetric mixed-compression inlet provided the best aircraft range. At Mach 2.3, the two-dimensional mixed-compression inlet was the most attractive if enough variable geometry were incorporated to minimize spillage during subsonic cruise. Increases in takeoff-to-cruise air flow ratio gave lower aircraft range.

Bangert, L. H.↗

Numerical boundary condition procedures and multigrid methods; Proceedings of the Symposium, NASA Ames Research Center, Moffett Field, CA, October 19-22, 1981

Papers presented in this volume provide an overview of recent work on numerical boundary condition procedures and multigrid methods. The topics discussed include implicit boundary conditions for the solution of the parabolized Navier-Stokes equations for supersonic flows; far field boundary conditions for compressible flows; and influence of boundary approximations and conditions on finite-difference solutions. Papers are also presented on fully implicit shock tracking and on the stability of two-dimensional hyperbolic initial boundary value problems for explicit and implicit schemes.

Source record↗

Stability and transition in supersonic boundary layers

The three-dimensional time-dependent, compressible Navier-Stokes equations are numerically solved by a Fourier-Chebyshev collocation algorithm to study the stability of a Mach 4.5 flow over a flat plate. Several nonlinear direct simulations suggest the existence of a secondary instability which might provide a possible route to transition. Pertinent differences in the energy content of the various Fourier modes between this instability and the more common incompressible K-type instabilities are pointed out.

Erlebacher, Gordon↗

Hypersonic code efficiency and validation studies

Renewed interest in hypersonic and supersonic flows spurred the development of the Compressible Navier-Stokes (CNS) code. Originally developed for external flows, CNS was modified to enable it to also be applied to internal high speed flows. In the initial phase of this study CNS was applied to both internal flow applications and fellow researchers were taught to run CNS. The second phase of this research was the development of surface grids over various aircraft configurations for the High Speed Research Program (HSRP). The complex nature of these configurations required the development of improved surface grid generation techniques. A significant portion of the grid generation effort was devoted to testing and recommending modifications to early versions of the S3D surface grid generation code.

Bennett, Bradford C.↗

Linear stability of the confined compressible reacting mixing layer

This paper investigates the linear stability of confined mixing layers with special emphasis on the effects of heat release and compressibility. The results show that reflection of supersonic disturbances by the walls makes the confined supersonic mixing layer more unstable than the unconfined free shear layer. Decreasing the distance between the walls makes the flow more unstable. However, subsonic disturbances are relatively unaffected by the walls. Heat release and Mach number hardly change the growth rates of supersonic disturbances. The most unstable supersonic disturbances are two-dimensional in rectangular channel flows, but three-dimensional in partially confined flows. Finally, the reactants are not strongly mixed by supersonic instabilities, which mainly disturb one side of the layer.

Shin, D. S.↗

Surface boundary conditions for the numerical solution of the Euler equations

We consider the implementation of boundary conditions at solid walls in inviscid Euler solutions by upwind, finite-volume methods. We review some current methods for the implementation of surface boundary conditions and examine their behavior for the problem of an oblique shock reflecting off a planar surface. We show the importance of characteristic boundary conditions for this problem and introduce a method of applying the classical flux-difference splitting of Roe as a characteristic boundary condition. Consideration of the equivalent problem of the intersection of two (equal and opposite) oblique shocks was very illuminating on the role of surface boundary conditions for an inviscid flow and led to the introduction of two new boundary-condition procedures, denoted as the symmetry technique and the curvature-corrected symmetry technique. Examples of the effects of the various surface boundary conditions considered are presented for the supersonic blunt body problem and the subcritical compressible flow over a circular cylinder. Dramatic advantages of the curvature-corrected symmetry technique over the other methods are shown, with regard to numerical entropy generation, total pressure loss, drag and grid convergence.

Dadone, A.↗

Flux-difference split scheme for turbulent transport equations

This paper describes a high accuracy upwind method to solve the mean compressible flow equations closed with two-equation turbulence models. A flux-difference splitting scheme is developed to compute the flowfield without introducing oscillations into the solution. A high-order accuracy scheme is used to predict both the mean flow variables and the turbulence variables. Results comparing two different two-equation turbulence models are presented for supersonic flow over a flat plate and a compressible, free shear-layer. The non-oscillatory behavior of the upwind scheme is demonstrated on the free shear-layer.

Morrison, J. H.↗

The boundary data immersion method for compressible flows with application to aeroacoustics

This paper introduces a virtual boundary method for compressible viscous fluid flow that is capable of accurately representing moving bodies in flow and aeroacoustic simulations. The method is the compressible extension of the boundary data immersion method (BDIM, Maertens & Weymouth (2015), ). The BDIM equations for the compressible Navier–Stokes equations are derived and the accuracy of the method for the hydrodynamic representation of solid bodies is demonstrated with challenging test cases, including a fully turbulent boundary layer flow and a supersonic instability wave. In addition we show that the compressible BDIM is able to accurately represent noise radiation from moving bodies and flow induced noise generation without any penalty in allowable time step.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rotor design of high tip speed low loading transonic fan.

This paper describes the design concepts, principles and details of a high tip speed transonic rotor having low aerodynamic loading. The purpose of the NASA sponsored investigation was to determine whether good efficiency and large stall margin could be obtained by designing a rotor to avoid flow separation associated with strong normal shocks. Fully supersonic flow through the outboard region of the rotor with compression accomplished by weak oblique shocks were major design concepts employed. Computer programs were written and used to derive blade sections consistent from the all-supersonic tip region to the all-subsonic hub region. Preliminary test results indicate attainment of design pressure ratio and design flow at design speed with about a 1.6 point decrement in efficiency and large stall margin.

Erwin, J. R.↗