Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Superfluidity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

The liquid/vapor boundary in a porous plug

Results are presented from measurements of pressure and temperature differences as a function of the flow rate and hydrostatic head for two types of porous plugs for phase separation of superfluid He and He vapor: (1) a plug made of sintered stainless steel, similar to that in the IRAS, IRT, and COBE dewars except for larger pores, and (2) a glass plug with pores of uniform cross section. Results show that a liquid/vapor phase boundary exists at the outer surface of the porous plug for low flows or large hydrostatic heads; as the flow increases or the hydrostatic head decreases, the boundary retreats into the plug. Some hysteresis near the phase boundary retreat was observed in the stainless steel plug.

Dipirro, M. J.↗
NASA NTRS1990

Discrete liquid/vapor detectors for use in liquid helium

Simple devices have been constructed and tested which can discriminate between liquid helium and its vapor. The devices are 0.25-mm doped silicon cubes suspended from 0.05-mm-diameter stainless steel and manganin wires. A small current is passed through the device heating it and lowering its resistance. The degree of self-heating is dependent on whether the device is immersed in liquid or is surrounded by vapor. The voltage across the device then indicates the presence of liquid or vapor. The devices are meant to operate in the milligravity environment of space. Tests simulating thick superfluid films which would be present in this case indicate less than 0.3 milliwatt per detector is sufficient to boil away these thick films. The detector response time under these conditions is less than 50 milliseconds.

Dipirro, M. J.↗
NASA NTRS1990

A calorimetric mass gauge system for the Cosmic Background Explorer (COBE)

A system for the COBE flight dewar to measure its liquid helium fill is presented. A small known amount of heat is applied to the helium tank and monitor the temperature rise in the liquid and the tank. Working with a detailed thermal model of the tank and liquid the amount of liquid present is determined. COBE uses a 117-mW, 7-mA heater to warm the helium. It is planned to use the mass gaging system only after the projected midpoint of the mission, after one full sky survey. The system is optimized for use with 50-75 liters of helium. Ground testing of the system in a one-gravity environment is difficult, but from tests conducted so far, an on-orbit temperature rise of about 2.5 mK/min is estimated. A similar system is planned for the Superfluid Helium On-Orbit Transfer (SHOOT), a Shuttle-based experiment. The SHOOT's specific requirements call for a high-power pulse heater, applying 40 W for approximately 20 seconds.

Volz, Stephen M.↗
NASA NTRS1992

Characterization of gaseous helium jet dispersion to atmosphere

A major ground-based experiment to be performed for the Superfluid Helium On Orbit Transfer (SHOOT) program is the accidental loss of the vacuum guard of the super-insulated dewar. The design of the dewar vent-path requires adequate mass removal after a preset pressure is reached due to external heat transfer. The existing helium creates a turbulent buoyant jet, expanding in air with entrainment of the jet interface to the surrounding. Transient analysis is performed for axial and radial jet temperature prediction using the self-similarity assumption applied to mass, momentum, and the energy-balance equations of helium. The predicted jet temperature profiles with vertical and radial expansion up to 1.6 and 1.0 m, respectively, demonstrate the low temperature core established by gaseous helium. For all time steps, the axial and radial temperature predictions are observed to be within 8 and 20 percent, respectively.

Khan, H. J.↗
NASA NTRS1990

Mission optimization of the Space Infrared Telescope Facility

The Space Infrared Telescope Facility (SIRTF) mission based on a cryogenically cooled telescope is described. The SIRTF makes it possible to perform background limited measurements with three focal plane instruments in the wavelength range 2-700 microns over the entire celestial sphere for at least five years. A telescope performance limited by the natural astrophysical background between 2 to 300 microns is achieved by using a superfluid helium cryogenic system for maintaining the forebaffle temperature below 8 K. The attitude control system based on Extreme Ultra-Violet Explorer reaction wheels meets the large and small angle slew requirements and provides 0.15 arc sec pointing stability. The present HEO baseline configuration has a mass of 4370 kg. The future Titan IV/Centaur launch capability to 100,000 km for a SIRTF-sized payload is at least 5770 kg.

Brooks, Walter F.↗
NASA NTRS1990

Performance predictions for spaceborne, long-lifetime helium dewars containing large-aperture telescopes

The evolution of design approaches for high-performance superfluid helium dewars containing large-aperture telescopes are discussed. Particular attention is given to thermal-math modeling for the IRAS and the Cosmic Background Explorer (COBE) dewars. Correlation of the recent COBE flight data with the dewar thermal-math model is presented, and apparent predictive deficiencies of the model are discussed.

Hopkins, Richard A.↗
NASA NTRS1990

The SHOOT cryogenic components - Testing and applicability to other flight programs

Cryogenic components and techniques for the superfluid helium on-orbit transfer (SHOOT) flight demonstration are described. Instrumentation for measuring liquid quantity, position, flow rate, temperature, and pressure has been developed using the data obtained from the IRAS, Cosmic Background Explorer, and Spacelab 2 helium dewars. Topics discussed include valves and burst disks, fluid management devices, structural/thermal components, instrumentation, and ground support equipment and performance test apparatus.

Dipirro, Michael J.↗
NASA NTRS1992

Space Infrared Telescope Facility mission and cryogenic design

The Space Infrared Telescope Facility is the last of the Great Observatory missions. It is presently scheduled for launch in 2001. The mission will study the infrared spectrum from 2 to 1200 microns with three imaging and spectral instruments. The observatory will have a 5 year lifetime and will be placed in a 100,000 km earth orbit. The cryogenic system is based on a 4000 I superfluid helium cryostat. The mission and the cryogenic system are described, and the cryogenic technology issues are discussed.

Mason, P. V.↗
NASA NTRS1992

End-to-end modelling of He II flow systems

A practical computer code has been developed which uses the accepted two-fluid model to simulate He II flow in complicated systems. The full set of equations are used, retaining the coupling between the pressure, temperature and velocity fields. This permits modeling He II flow over the full range of conditions, from strongly or weakly driven flow through large pipes, narrow channels and porous media. The system may include most of the components used in modern superfluid flow systems: non-ideal thermomechanical pumps, tapered sections, constrictions, lines with heated side walls and heat exchangers. The model is validated by comparison with published experimental data. It is applied to a complex system to show some of the non-intuitive feedback effects that can occur. This code is ready to be used as a design tool for practical applications of He II. It can also be used for the design of He II experiments and as a tool for comparison of experimental data with the standard two-fluid model.

Mord, A. J.↗
NASA NTRS1992

Blow-down analysis of helium from a cryogenic dewar

NASA is currently developing Space Shuttle-based refilling of helium using superfluid helium on-orbit transfer (SHOOT). All the critical components of SHOOT need to be developed through ground-based tests. The helium dewar is one of these components. The Dewar consists of a vacuum vessel enclosing a superinsulated tank. The space between the vacuum vessel and the liquid tank is considered a common vacuum space. In the event that the vacuum is lost, the heat transfers to the dewar and the pressure inside the dewar increases rapidly, resulting in rupture of the dewar due to excessive pressure. Therefore, an emergency vent line is required for release of helium to prevent the dewar from rupturing. The study describes a numerical model for blow-down analysis in an emergency. This qualifies the design of the emergency vent line to be adequate for the assumed heat loads to the helium dewar.

Khan, H. J.↗
NASA NTRS1992

Hall voltage sign reversal in thin superconducting films

A novel approach to the superconducting Hall effect is developed, based on the opposing drift of the thermally excited quasi-particles. These collide quasi-elastically with the hydrodynamics superfluid velocity field circulating for outside the core of a vortex, thereby transferring momentum to the latter. The predicted Hall angle, by BCS theory, is of the order of kBTc divided by the Fermi energy, has sign opposite to that in the normal state because of the backflow, and disappears at low temperature.

Ferrell, Richard A.↗
NASA NTRS1992

Random-anisotropy Blume-Emery-Griffiths model

The results are described of studies of a random-anisotropy Blume-Emery-Griffiths spin-1 Ising model using mean-field theory, transfer-matrix calculations, and position-space renormalization-group calculations. The interplay between the quenched randomness of the anisotropy and the annealed disorder introduced by the spin-1 model leads to a rich phase diagram with a variety of phase transitions and reentrant behavior. The results may be relevant to the study of the phase separation of He-3 - He-4 mixtures in porous media in the vicinity of the superfluid transition.

Maritan, Amos↗
NASA NTRS1991

Welding in space and the construction of space vehicles by welding; Proceedings of the Conference, New Carrollton, MD, Sept. 24-26, 1991

The present conference discusses such topics in spacecraft welding as the NASA Long Duration Exposure Facility's evidence on material properties degradation, EVA/telerobotic construction techniques, welding of the superfluid helium on-orbit transfer flight demonstration tanks and hardware, electron-beam welding of aerospace vehicles, variable-polarity plasma arc keyhole welding of Al, aircraft experiments of low-gravity fusion welding, flash-butt welding of Al alloys, and a computer-aided handbook for space welding fabrication. Also discussed are the welded nozzle extension for Ariane launch vehicles, the existence of on-orbit cold-welding, structural materials performance in long-term space service, high-strength lightweight alloys, steels, and heat-resistant alloys for aerospace welded structures, the NASA-Goddard satellite repair program, and the uses of explosion welding and cutting in aerospace engineering.

Source record↗
NASA NTRS1991

Test program, helium II orbital resupply coupling

The full scope of this program was to have included development tests, design and production of custom test equipment and acceptance and qualification testing of prototype and protoflight coupling hardware. This program was performed by Ball Aerospace Systems Division, Boulder, Colorado until its premature termination in May 1991. Development tests were performed on cryogenic face seals and flow control devices at superfluid helium (He II) conditions. Special equipment was developed to allow quantified leak detection at large leak rates up to 8.4 x 10(exp -4) SCCS. Two major fixtures were developed and characterized: The Cryogenic Test Fixture (CTF) and the Thermal Mismatch Fixture (Glovebox). The CTF allows the coupling hardware to be filled with liquid nitrogen (LN2), liquid helium (LHe) or sub-cooled liquid helium when hardware flow control valves are either open or closed. Heat leak measurements, internal and external helium leakage measurements, cryogenic proof pressure tests and external load applications are performed in this fixture. Special reusable MLI closures were developed to provide repeatable installations in the CTF. The Thermal Mismatch Fixture allows all design configurations of coupling hardware to be engaged and disengaged while measuring applied forces and torques. Any two hardware components may be individually thermally preconditioned within the range of 117 deg K to 350 deg K prior to engage/disengage cycling. This verifies dimensional compatibility and operation when thermally mismatched. A clean, dry GN2 atmosphere is maintained in the fixture at all times. The first shipset of hardware was received, inspected and cycled at room temperature just prior to program termination.

Hyatt, William S.↗
NASA NTRS1988

A helium-3/helium-4 dilution cryocooler for operation in zero gravity

This research effort covered the development of He-3/He-4 dilution cryocooler cycles for use in zero gravity. The dilution cryocooler is currently the method of choice for producing temperatures below 0.3 Kelvin in the laboratory. However, the current dilution cryocooler depends on gravity for their operation, so some modification is required for zero gravity operation. In this effort, we have demonstrated, by analysis, that the zero gravity dilution cryocooler is feasible. We have developed a cycle that uses He-3 circulation, and an alternate cycle that uses superfluid He-4 circulation. The key elements of both cycles were demonstrated experimentally. The development of a true 'zero-gravity' dilution cryocooler is now possible, and should be undertaken in a follow-on effort.

Hendricks, John B.↗
NASA NTRS1992

Magnetic field decay in isolated neutron stars

Three mechanisms that promote the loss of magnetic flux from an isolated neutron star - Ohmic decay, ambipolar diffusion, and Hall drift - are investigated. Equations of motions are solved for charged particles in the presence of a magnetic field and a fixed background of neutrons, while allowing for the creation and destruction of particles by weak interactions. Although these equations apply to normal neutrons and protons, the present interpretations of their solutions are extended to cover cases of neutron superfluidity and proton superconductivity. The equations are manipulated to prove that, in the presence of a magnetic force, the charged particles cannot be simultaneously in magnetostatic equilibrium and chemical equilibrium with the neutrons. The application of the results to real neutron stars is discussed.

Goldreich, Peter↗
NASA NTRS1993

On quasiperiodic variations of pulsars' periods - An alternative to the planetary interpretation of PSR1257+12

The quasi-periodic timing residuals of PSR1257+12 are considered to be a result of two large-scale internal motions of the neutron star: core-crust relative motion and precession. The model requires that the superfluid core of a neutron star is not pinned to the solid crust. A very good fit to the observations is obtained for the set of parameters that corresponds to a nearly orthogonal rotator, and the period of the core-crust relative rotation that is nearly twice the period of precession.

Dolginov, A. Z.↗
NASA NTRS1991

Space Infrared Telescope Facility (SIRTF) telescope overview

The Space Infrared Telescope Facility (SIRTF) will be the first true infrared observatory in space, building upon the technical and scientific experience gained through its two NASA survey-oriented predecessors: the Infrared Astronomical Satellite and the Cosmic Background Explorer. During its minimum five year lifetime, the SIRTF will perform pointed scientific observations at wavelengths from 1.8 to 1200 microns with an increase in sensitivity over previous missions of several orders of magnitude. This paper discusses a candidate design for the SIRTF telescope, encompassing optics, cryostat, and instrument accommodation, which has been undertaken to provide a fulcrum for the development of functional requirements, interface definition, risk assessment and cost. The telescope optics employ a baffled Ritchey-Chretien Cassegrain system with a 1-m class primary mirror, an active secondary mirror, and a stationary facetted tertiary mirror. The optics are embedded in a large superfluid He cryostat designed to maintain the entire telescope-instrument system at temperatures below 3 K.

Schember, Helene↗