Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stratigraphy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Structural and Stratigraphic Controls on Methane Hydrate occurrence and distribution: Gulf of Mexico, Walker Ridge 313 and Green Canyon 955: Final Report

The goal of this project was to determine structural and stratigraphic controls on hydrate occurrence and distribution in Green Canyon (GC) 955 and Walker Ridge (WR) 313 blocks using seismic and well data. Gas hydrate was discovered in these blocks in coarse- and fine-grained sediments during the 2009 Joint Industrial project (JIP) Leg 11 drilling expedition. Although the immediate interest of the exploration community is exclusively hydrate which is present in coarse–grained sediments, factors that control hydrate and free gas distribution in the two blocks and whether coarse and fine-grained hydrate-bearing units are related in any manner, formed the core of this research. The project spanned from 10/01/2012 to 07/31/2016. In the project, in both the leased blocks, the interval spanning the gas hydrate stability zone (GHSZ) was characterized using a joint analysis of sparse Ocean Bottom Seismic (OBS) and dense, surface–towed multichannel seismic (MCS) data. The project team had the luxury of calibrating their results with two well logs. Advance processing methods such as depth migration and full-waveform inversion (FWI) were used for seismic data analysis. Hydrate quantification was achieved through interpretation of the FWI velocity field using appropriate rock physics models at both blocks. The seismic modeling/inversion methodology (common to both GC955 and WR313 blocks) was as follows. First, the MCS data were depth migrated using a P-wave velocity (VP) model constructed using inversion of reflection arrival times of a few (four in both cases) key horizons carefully picked in the OBS data to farthest possible offsets. Then, the resolution of the traveltime VP model was improved to wavelength scale by inverting OBS gathers up to the highest frequency possible (21.75 Hz for GC955 and 17.5 for WR313) using FWI. Finally, the hydrate saturation (or the volume fraction) was estimated at the well location assuming one of the other hydrate morphology (filling the primary or the secondary porosity) was extrapolated out from the wells using the FWI VP as a guide. General outcomes were as follows. First and foremost, an imaging methodology using sparse seismic data, which is easily replicable at other sites with similar datasets, has been demonstrated. The end product of this methodology at both the leased blocks is quantitative estimates of hydrate distribution. Second, at both locations there is strong evidence that the base of the GHSZ, which does not appear as a clear Bottom Simulating Reflection (BSR), manifests in the VP perturbations created by FWI, suggesting that FWI is sensitive to subtle compositional changes in shallow sediments and establishes it as a valuable tool for investigations of hydrate-bearing basins. Third, through joint interpretation of the depth migrated image and the FWI VP model, how structure and stratigraphy jointly determine hydrate and free gas distribution in both blocks could be clearly visualized. The joint interpretation also suggests that the coarse and fine grained hydrate-bearing sediments at both leased are connected. Site specific results, in addition to general results, are as follows. At GC955 the overlying fine-grained hydrate-bearing unit could have been sourced from the underlying hydrate coarse-grained channel-levee complex through a chimney feature. The channel-levee system at GC955 is compartmentalized by faults, of which only a few may be impermeable. Although compartmentalized, the channel-levee system in the GC955 as a whole might be in communication except selected zones. At WR313 the overlying fine-grained fracture-filled hydrate unit appears to be sourced from below the GHSZ. The reason that only a particular fine-grained unit has hydrate, despite having lower porosity that the bounding units, could be the presence of secondary porosity (such as those formed from clay dewatering under compaction). In conclusion, the project was a pioneering effort in in joint analysis of OBS and MCS datasets for advancing the knowledge about a hydrate and free–gas system dynamics using advanced processing methods such as FWI and depth migration. Results obtained in this project can greatly advance the tools and techniques used for delineating specific hydrate prospects. Results obtained in this project can also be seamlessly incorporated into other DOE funded project on modeling the potential productivity and commercial viability of hydrate from sand-dominated reservoirs. The OBS and MCS data in this project were acquired in 2012 (after the JIP II drilling) by the USGS and therefore the results are a posteriori. Nonetheless, the seismic inversion workflow established through this project can be used to generate various what-if quantification scenarios even in absence of logs and serve as a valuable tool for guiding drilling operations. Results from this project can augment other DOE sponsored projects on determining the commercial viability of methane production from the Gulf of Mexico.

03 NATURAL GAS↗

Final Report: Optimal Model Complexity in Geological Carbon Sequestration: A Response Surface Uncertainty Analysis

The critical component of a risk assessment study in evaluating GCS is an analysis of uncertainty in CO2 modeling. In such analyses, direct numerical simulation of CO2 flow and leakage requires many time-consuming model runs. Alternatively, analytical methods have been developed which allow fast and efficient estimation of CO2 storage and leakage, although restrictive assumptions on formation rock and fluid properties are employed. In this study, an intermediate approach is proposed based on the Design of Experiment and Response Surface methodology, which consists of using a limited number of numerical simulations to estimate a prediction outcome as a combination of the most influential uncertain site properties. The methodology can be implemented within a Monte Carlo framework to efficiently assess parameter and prediction uncertainty while honoring the accuracy of numerical simulations. The choice of the uncertain properties is flexible and can include geologic parameters that influence reservoir heterogeneity, engineering parameters that influence gas trapping and migration, and reactive parameters that influence the extent of fluid/rock reactions. The method was tested and verified on modeling long-term CO2 flow, non-isothermal heat transport, and CO2 dissolution storage by coupling two-phase flow with explicit miscibility calculation using an accurate equation of state that gives rise to convective mixing of formation brine variably saturated with CO2. All simulations were performed using three-dimensional high-resolution models including a target deep saline aquifer, overlying caprock, and a shallow aquifer. To evaluate the uncertainty in representing reservoir permeability, sediment hierarchy of a heterogeneous digital stratigraphy was mapped to create multiple irregularly shape stratigraphic models of decreasing geologic resolutions: heterogeneous (reference), lithofacies, depositional environment, and a (homogeneous) geologic formation. To ensure model equivalency, all the stratigraphic models were successfully upscaled from the reference heterogeneous model for bulk flow and transport predictions (Zhang & Zhang, 2015). GCS simulation was then simulated with all models, yielding insights into the level of parameterization complexity that is needed for the accurate simulation of reservoir pore pressure, CO2 storage, leakage, footprint, and dissolution over both short (i.e., injection) and longer (monitoring) time scales. Important uncertainty parameters that impact these key performance metrics were identified for the stratigraphic models as well as for the heterogeneous model, leading to the development of reduced/simplified models at lower characterization cost that can be used for the reservoir uncertainty analysis. All the CO2 modeling was conducted using PFLOTRAN – a massively parallel, multiphase, multi-component, and reactive transport simulator developed by a multi-laboratory DOE/SciDAC (Scientific Discovery through Advanced Computing) project (Zhang et al., 2017, in review). Within the uncertainty analysis framework, increasing reservoir depth were investigated to explore its effect on the uncertainty outcomes and the potential for developing gravity-stable injection with increased storage security (Dai et al., 20126; Dai et al., 2017, in review). Finally, to accurately model CO2 fluid-rock reactions and resulting long-term storage as secondary carbonate minerals, a modified kinetic rate law for general mineral dissolution and precipitation was proposed and verified that is invariant to a scale transformation of the mineral formula weight. This new formulation will lead to more accurate assessment of mineral storage over geologic time scales (Lichtner, 2016).

58 GEOSCIENCES↗

North Dakota Integrated Carbon Storage Complex Feasibility Study. Final report

In spring 2017, the Energy & Environmental Research Center (EERC) initiated an effort to determine the feasibility of developing a commercial-scale CO 2 geologic storage complex able to store 50+ million tonnes (Mt) of CO 2 in central North Dakota safely, permanently, and economically. The objective was to fulfill the goals of the U.S. Department of Energy (DOE) Carbon Storage Assurance Facility Enterprise (CarbonSAFE) Initiative and address technical and nontechnical challenges specific to commercial-scale deployment of a CO2 storage project. The findings clearly show that the concept of capturing CO 2 from a lignite-fired electrical generation facility in central North Dakota and safely and permanently storing the CO 2 in the deep subsurface is indeed technically, economically, and socially feasible. This project evaluated two study areas and their respective geologic storage complexes located adjacent to separate coal-fired facilities in North Dakota: the Basin Electric Power Cooperative (BEPC)-owned Great Plains Synfuels Plant (GPSP) and the Minnkota Power Cooperative (Minnkota)-owned Milton R. Young Station (MRYS). These locations, one with CO 2 capture in place and an existing CO 2 pipeline, are bolstered by progressive North Dakota pore space ownership and long-term liability laws. These elements and a motivated team created an ideal synergistic scenario for ensuring success of the CarbonSAFE Initiative and promoting North Dakota’s statewide vision for carbon management. The project included drilling two new geologic characterization wells, integrating an existing 3-D seismic survey, creating a geologic model subsequently used for injection simulation, a risk assessment, public outreach, and generating a site development plan based on results. In addition, the performance of select National Risk Assessment Partnership tools was evaluated. The geologic characterization wells were drilled ~5600 feet deep to the Broom Creek Formation; ~350 feet of core was retrieved from each well. The core included the Broom Creek (targeted injection zone) and a portion of the overlying Opeche Shale (seal). The Flemmer-1 well, west of Beulah, North Dakota, yielded 169 feet of sandstone. The BNI-1 well located south of Center, North Dakota, yielded 124 feet of sandstone. In each case, laboratory analysis of the sandstone showed permeability in the 300–1000-mD range, with porosity of 20%–30%. The Flemmer-1 well was sited within the boundaries of an existing 3-D seismic survey. Colocating the well with the seismic survey maximized the relationship between new and legacy data and developed a first-of-its-kind interpretation of the geologic fabric of the Broom Creek. Geologic characterization data were integrated into a 5544-mi 2 geocellular model that encompassed both new wells and stratigraphy from the surface to the Amsden Formation (underlying the Broom Creek). The model was later expanded vertically to include the deeper Black Island–Deadwood interval to examine its potential viability as a storage target. The geocellular model provided the foundation for dynamic simulation of CO 2 into the Broom Creek. Results of the simulation suggest that the Broom Creek could accept the DOE target rate of 2 Mt/yr of CO 2 into as few as two wells. To bracket the expected capture from MRYS, simulations were also investigated for a 4-Mt/yr rate near MRYS. Although more wells are needed (two additional), the Broom Creek still has the storage resource to accept the CO 2 at the increased rate. A risk assessment exercise was conducted to identify and assess technical and nontechnical risks that could prevent potential candidate storage complexes within the study area from serving as commercial storage sites. The assessment identified and evaluated six technical risk categories: 1) CO 2 injectivity, 2) storage capacity, 3) lateral migration of CO 2 , 4) lateral pressure propagation, 5) vertical migration of CO 2 or formation brine, and 6) induced seismicity. Following two rounds of analysis and scoring, no risks were determined to preclude continued efforts to develop carbon capture, utilization, and storage (CCUS) in central North Dakota. The risk assessment results will be used to guide future site characterization, modeling and simulation, and monitoring activities. A specific nontechnical strategic risk based on challenges that may be realized in amalgamation of pore space resulted in vertically expanding the geologic model to incorporate the potential for stacked storage in multiple saline reservoirs. By including the Black Island–Deadwood interval (the basal sedimentary reservoir in this region), the amalgamated areal extent could be reduced by as much as 45%. Working with a smaller geographic area reduces risks and costs associated with monitoring and pore space leasing. An economic evaluation incorporating capture; transport (<5 mi); Class VI wells; permitting; and monitoring, verification, and accounting suggests implementing commercial-scale CCUS is economically attractive if the federal tax benefits of 45Q are included. This is validated by Minnkota’s continued pursuit of CO 2 capture and geologic storage at MRYS through its Project Tundra initiative, indicating that there is a business case for CCUS in central North Dakota. Currently, North Dakota is the only state with underground injection control (UIC) Class VI primacy. Built into the North Dakota Century Code is a series of regulatory requirements that guide the process to obtain a Class VI CO 2 storage facility permit. As part of this project, a site development plan was compiled to assure compliance with North Dakota’s requirements to permit a commercial-scale CO 2 storage operation and includes a prospective time line encompassing a general breakdown of activities. In total, an estimated 30 months would be needed to execute the necessary steps to attain a North Dakota CO 2 storage facility permit. Outreach was an integral part of the project and encompassed any project-related activity that had contact or exposure beyond the project team. The goals of outreach were to foster an environment from which stakeholders could make informed decisions about the project and gauge community receptiveness to a CCUS project. A consistent set of messages and outreach products were developed in conjunction with an outreach advisory board that integrated project partners and team members. To gauge public acceptability of geologically storing CO 2 , 5611 households in the project area were invited to participate in an online survey. The survey results indicate that the public attitude regarding CCUS is neutral to positive, with strong sentiment that CO 2 capture and storage may be an approach to maintain the economic vitality of the region. To achieve project objectives, critical support in the form of financial backing, engineering evaluations, site access, outreach collaboration, operations data, risk assessment/evaluation, and software access was provided by BEPC, the North Dakota Industrial Commission Lignite Research Council, ALLETE Clean Energy, BNI Energy, North American Coal Corporation, Minnkota, Prairie Public Broadcasting, Computer Modelling Group Ltd., and Schlumberger.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Geophysical Methods for Stratigraphic Identification

Although geophysics has been used for identifying subsurface fluid flow and contaminant spatial distributions at the Hanford Site and elsewhere, geophysics has not been generally used for identifying aquifer stratigraphy at environmentally relevant depths (> 70 m). This is because the bulk geophysical measurements of aquifer sediments cannot be directly related to sediment properties due to competing effects (e.g., porosity, pore-fluid conductivity, grain-sizes), thereby restricting the ability of conventional geophysical tools from discriminating their variation. Electrical resistivity tomography (ERT) is a method that can overcome these limitations because time-lapsed imaging, demonstrating changes in these properties over time, can be obtained from field sensors that can be left in place.

54 ENVIRONMENTAL SCIENCES↗

Assessing the Accuracy of a Borehole-Controlled Velocity Model of Yucca Flat, Nevada, Using Large-N Seismic Data

The Source Physics Experiment (SPE) aims to improve nuclear test monitoring capabilities through a series of chemical explosions in Yucca Flat within the Nevada National Security Site (NNSS) (Snelson et al., 2013). With geologic data from over 950 boreholes, Yucca Flat has excellent borehole control on stratigraphy. These data were used to create a Geologic Framework Model (GFM) of the basin to aid in the study of seismic wave propagation through the Earth. However, the seismic velocities of the geologic units in the GFM are less well-defined. With the acquisition of five new active source Large-N datasets, we can now quantitatively assess the accuracy of the seismic model previously controlled by borehole data alone.

58 GEOSCIENCES↗

Enhanced Recovery Opportunities in the Appalachian Basin

The Midwest Regional Carbon Sequestration Partnership (MRCSP) has incorporated the work of geologic research teams (Geoteams) in its regional characterization, project planning and carbon dioxide (CO2) injection implementation work since the partnership was established by the U.S. Department of Energy (DOE) in 2003. Over this 16-year period, the cohort of Geoteams has grown from five to ten states and has contributed to the characterization of geologic sequestration opportunities, refinement of reservoir and seal data, and supported injection efforts through both predictive and post-injection assessments. The Appalachian Basin Geoteam consists of geologists from the state geological surveys of Kentucky, Maryland, New York, Ohio, Pennsylvania, and West Virginia. Pennsylvania and West Virginia led the research related to enhanced recovery opportunities in oil and gas fields, while Kentucky led the work associated with enhanced gas recovery (EGR) opportunities in organic-rich shales. The Appalachian Basin Geoteam evaluated reservoirs amenable to CO2-EOR and EGR using a combination of data sources and technical approaches. The Geoteam characterized the subsurface geology of the area in stepwise fashion, starting with existing geologic maps and fields/pools data generated as part of previous MRCSP regional characterization research. With this data, the Geoteam correlated stratigraphy and generated cross sections to delineate the extent, depths and thicknesses of those formations that may serve as reservoirs for either miscible or immiscible enhanced recovery projects. In addition, the team prepared structure and isopach maps for prospective formations, as well as assessments of gross and net porosity of these units. Once prospective localities were identified, the Geoteam selected a short list of oil fields in each of the three states for assessment for case study preparation.

01 COAL, LIGNITE, AND PEAT↗

Present Early Test Results at SECARB Industry Briefing [Slides]

Contents include the following presentations: 1) SECARB Phase III Early Test Cranfield, MS; 2) SECARB Phase III Early Test at Cranfield, March 9, 2010; 3) Update on Results of SECARB "Early" Test of Monitoring Large Volume Injection at Cranfield; 4) Progress Update SECARB "Early" Test Monitoring 3.5 Million Tons at Cranfield, March 7, 2012; 5) Cranfield Geophysical Monitoring Status and Results, March 8, 2012; 6) Large Volume CO 2 Injection at Cranfield, Early Field Test of the SECARB Phase III–Near-Surface Monitoring, March 7, 2012; 7) Shallow Groundwater Study at the Cranfield Site, March 12, 2013; 8) Subsurface Monitoring Studies–Results and Integration, March 12, 2013; 9) Review of the Petrophysics for the Cranfield Phase III Project, March 12, 2013; 10) Geomechanics at Cranfield, March 5, 2014; 11) Gulf Coast Carbon Center Near-Surface Update, March 4-5, 2014; 12) Monitoring Design Best Practices, March 5, 2014; 13) Assessing Impacts of CO 2 Leakage on Groundwater Quality and Monitoring Network Efficiency–Case Study at a CO 2 -EOR site, March 11, 2013; 14) Near-surface Stratigraphy and Geophysics, March 11, 2015; 15) Update on Reservoir Modeling and Final Testing and P&A Underway, March 11, 2013; 16) SECARB Early Test Retrospective; 17) Fluid Source Attribution at CCS and CO 2 -EOR Sites, March 8, 2016; 18) SECARB "Early Test" at Cranfield, March 8-9, 2017; 19) Analysis of Seismic Time-Lapse Observations at Cranfield; 20) SECARB Phase III Cranfield Project (Early Test), March 8, 2018; 21) Enhanced Analytical Simulation Tool (EASiTool) Dynamic Capacity Estimation; 22) Net Carbon Negative Oil Mass Accounting–Cranfield Case Study; 23) Knowledge Sharing; 24) Advancing Toward Commercialization Final Stages of the Early Test; 25) CO 2 EOR Feasibility in SECARB Region Limited by CH 4 ; 26) Understanding of CO2 Migration and Entrapment–Cranfield Site

01 COAL, LIGNITE, AND PEAT↗

NRAP-Open-IAM Multisegmented Wellbore Reduced-Order Model

Geologic carbon storage is one of the promising strategies to mitigate climate change by reducing the emission of carbon dioxide to the atmosphere. As part of the National Risk Assessment Partnership (NRAP), a systems-level stochastic analysis tool called the open source integrated assessment model, NRAP-Open-IAM, has been developed to estimate and manage the risk of containment loss at a geological carbon sequestration site. NRAP-Open-IAM contains several wellbore leakage model components that estimate the fluid leak rate that may occur through compromised legacy wells due to the increase in pressure resulting from CO 2 injection activities. Coupled to a reservoir component model, these components estimate the leakage of CO 2 and/or brine from a storage reservoir to overlying aquifer layers and the atmosphere through legacy wells. This report presents the theoretical framework and quality testing of the multisegmented wellbore reduced-order model. The model allows for segmenting of the legacy wells passing through the overlying stratigraphy into several intervals to simulate a site’s specific stratigraphic and hydrogeologic properties. For quality assurance, the analytical model is validated against numerical reservoir flow simulations for single and multiple aquifer(s) models. The results indicate that the model accurately predicts the transport of two-phase fluids (brine and injected CO 2 ) through the well over time. A detailed description of the model helps users to understand the model and provides a basis for future improvements.

58 GEOSCIENCES↗

Report of Geology from the T.R. McMillen #2 Well Drilled for CarbonSAFE Illinois - Macon County (Task 6)

This extensive report describes the sedimentology and sequence stratigraphy of the Mt Simon Sandstone, seismic reflection, Precambrian basement geochronology, petrophysical analyses, reservoir properties and petrographic characterization based on data collected during drilling and 2D seismic surveys conducted as part of CarbonSAFE Illinois - Macon County.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Fort Nelson Test Site - Site Characterization Report

The Plains CO 2 Reduction (PCOR) Partnership, led by the Energy & Environmental Research Center (EERC), is working with Spectra Energy Transmission (SET) to determine the feasibility of large-scale injection of carbon dioxide (CO 2 ) into a deep brine-saturated carbonate formation near Fort Nelson, British Columbia, Canada, for the purpose of CO 2 storage. Site characterization must be conducted prior to large-scale injection of CO 2 at the Fort Nelson test site. Effective characterization supports modeling; risk assessment; and monitoring, verification, and accounting (MVA) programs that will constantly evolve to suit the project’s needs. Site characterization activities have been conducted to address three critical issues affecting the viability of the Fort Nelson test site: 1) the capacity of the target formation, 2) injectivity, and 3) containment – the potential for leakage of the injected CO 2 into overlying formations and/or the near-surface environment. Geochemical, mineralogical/petrophysical, geomechanical, and hydrogeological data have been collected for the purpose of supporting modeling, risk assessment, and MVA activities. The geology, stratigraphy, and lithology have been evaluated, delineated, and described for the entire sedimentary succession from the base of the Devonian age Presqu’ile reef complex to the top of the Fort Simpson shale (cap rock) in the Fort Nelson project area. The structural elements of the reef complex have been investigated to identify any existing faults and/or fractures that would allow migration of any reservoir and/or injected fluids out of the storage reservoir. On this basis, a geologic model has been built, with particular attention given to the Devonian injection interval and overlying and underlying sealing formations.

54 ENVIRONMENTAL SCIENCES↗

Area V: Waste Management and Subsurface Science (FY21-23 Final Report)

The objective of the Waste Management and Subsurface Science Topic Area V project is to evaluate the feasibility and safety of an intermediate-depth borehole for disposal of Israel Atomic Energy Commission (IAEC) nuclear waste. The IAEC nuclear waste is currently stored in above ground and/or in near-surface facilities that provide short-term radiological worker safety but do not provide long-term, full security and safeguards protection for the nuclear material. Disposal of the IAEC nuclear waste several hundred meters below the surface in a sealed borehole would provide long-term security and safeguards due to its depth underground, as well as long-term radiological safety, due to its isolation in a stable geological formation. This project supports the nuclear security and safeguards initiatives of the Science and Technology Working Group of the NNSA/IAEC Memorandum of Understanding (MOU) and addresses the Topic Area V objective and associated goals. The goals for Topic Area V are: (1) Assess the suitability of the vadose zone in the Yamin Plain of the northern Negev Desert, Israel as a host location for intermediate-depth borehole disposal of radioactive waste, (2) Define and refine the necessary characterization needs to better understand the regional climate, structure, and stratigraphy, geomechanics, geochemistry, hydrogeology, and seismicity of the stratigraphic sequence from the surface to the water table in the vicinity of the proposed host location for the disposal borehole(s), and (3) Develop a preliminary plan and schedule, including necessary resources and costs, for a borehole disposal concept and robust and transparent pre-closure and post-closure safety assessments. The safety assessments will require iteration with process level models at both site and regional scales. Upon completion, the information collected by this effort will allow the IAEC to make decisions regarding the viability and applicability of an intermediate depth (<500m) borehole for disposal in the vadose zone of the Yamin Plain. This FY21-23 final report is provided in lieu of a workshop report that was originally planned for delivery in January, 2024. Due to the conflict in Israel and associated delays, the workshop has been delayed to April 2024. The workshop will be held at LLNL but offsite and will switch to hybrid if travel restrictions remain in place. The associated workshop report will be provided as part of a new FY24-26 LCP.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Joint Inversion of Surface Electrical Resistivity Tomography and Seismic Refraction Data between the 200 Areas

Geologic stratigraphy on the Hanford Site influences groundwater and contaminant migration through the aquifer system and the vadose zone. The current geologic framework model (GFM) relies heavily on a sparse distribution of borehole data in some locations to map geologic contacts and hydrologic properties in the subsurface. Non-invasive geophysical methods such as electrical resistivity tomography (ERT), transient electromagnetic surveying, and seismic imaging are being used at Hanford to map subsurface structure in areas with limited well observations. This is to develop and mature the capability of geophysical methods to aid in GFM refinement, to identify regions of subsurface complexity, and for optimal well siting. A joint inversion of co-located seismic refraction and ERT data was carried out for data collected on a ~2.3-km profile between the 200 Areas on the Hanford Site. While ERT and seismic refraction images have sensitivity to overlapping physical properties (porosity, moisture content, lithology), the resolution and physics used to acquire each of these datasets are different and therefore information can be different or mutually complementary. Performing a joint inversion provides a reasonable option for a coherent, coupled interpretation for mutually complementary datasets. Between the 200 Areas, there are few boreholes to interpret the geologic framework model, and these data sets were obtained to provide a first line of evidence toward identifying stratigraphic structure. The seismic refraction and ERT data were independently inverted during fiscal year 2022 and broadly showed a two-layer structure with a trough-like feature that is ~1 km wide and upwards of 150 m deep. The depth of the trough feature was greater in the ERT image compared to the seismic image, which indicated a maximum depth of approximately 110 m. The objective of the joint inversion described in this report was to invert the seismic refraction and ERT data together while constraining the ERT image to be structurally similar to the seismic refraction image. The approach was applied using the geophysical inverse modeling program E4D, which has the capability to invert first-arrival times from seismic refraction data and ERT resistances using a “cross-gradient” constraint. The application of cross-gradient constraints with different weights produces ERT models that show a high degree of similarity within the upper 100 m (above ~120 m elevation). None of the ERT models show an improved structural similarity to the seismic result; therefore, it is recommended that further attempts to jointly interpret these models focus on petrophysics and image resolution. Petrophysical measurements of core samples would improve knowledge of what drives the ERT response in this region and, along with downhole geophysical measurements, could be used to “ground truth” the surface-based geophysical results. Image resolution studies would provide insight into which regions of the inverted images are reliable and which regions are poorly constrained.

58 GEOSCIENCES↗

Material Property Determinations for Rock Valley Legacy Samples in Support of Source Physics Experiment

The Source Physics Experiment (SPE) is a long-term NNSA research and development effort designed to improve nonproliferation verification and monitoring capabilities. The overarching goals of the SPE program are to improve understanding of prompt signals and physical signatures that develop from underground chemical explosions and associated modeling capabilities. Our work focuses on a primary factor controlling chemical explosion induced signals and signatures: the material properties of the rocks in which the chemical explosion takes place. This document reports on material property determinations of legacy core USGS Test Well F and outcrop analogs for the subsurface stratigraphy for the third phase of SPE in the Rock Valley (RV) area of the Nevada National Security Site (NNSS). The objective of this work is to establish a baseline set of lithologic descriptions and material properties expected prior to observatory borehole drilling in support of the SPE-RVDC (Rock Valley Direct Comparison) experiment. We determine for each rock type the compressional failure envelope, elastic properties as a function of stress (bulk modulus versus mean stress, shear modulus versus shear stress, Young’s modulus versus axial stress and Poisson’s ratio versus axial stress), indirect tensile strength, and porosity. Geologic characterization, both at the core-scale and microscale, provides context for using the data in modeling efforts and to inform interpretations for the material properties testing.

36 MATERIALS SCIENCE↗

IEA Wind TCP Task 49: Reference Site Conditions for Floating Wind Arrays

This report, prepared within Work package 1 of IEA Wind Task 49, presents reference site conditions for floating wind arrays to serve as a design basis for the techno-economic design of reference floating wind arrays. Data of the reference sites presented here are publicly available in an open database and thus support fast development and comparable design of floating wind arrays for various relevant conditions. The development of these reference sites drew on existing open access datasets and ongoing research projects of task participants. Six classes were identified that describe relevant key conditions for the design and development of floating wind arrays: met-ocean conditions, seabed conditions, coastal infrastructure, environmental impact, socio-economic impact, as well as regulations and permissions. The reference sites for the techno-economic design of floating wind arrays are based on a concept with building blocks to synthesize purpose-built site representations. In each of the identified classes with influencing design factors, building blocks are used to describe the characteristic properties and their spread. However, the latter three classes (i.e., environmental impact, socio-economic impact, regulations and permissions) are not included in the reference site conditions due to limited knowledge and lack of reliable criteria to quantify their impact on the techno-economic design in numeric parameters. Building blocks with key parameters for the techno-economic design of floating wind arrays are provided for met-ocean conditions, seabed conditions, and coastal infrastructure. For met-ocean conditions, multiple sites were selected for detailed analysis that represent a range of conditions across the pipeline of floating wind projects. Wind conditions and sea states are separated, and each location considers both the severity of wind and waves e.g. one site may have a moderate wave condition but severe wind condition. From this pipeline, eleven representative sites were selected where both site-specific analysis was available within the consortium, and where they represent different parts of the global pipeline. The eleven sites are: Hannibal (Italy), Humboldt (US), Ulsan (South Korea), MoneyPoint One (Ireland), Havbredey (UK), Fukushima (Japan), Utsira Nord (Norway), Gulf of Maine (US), Sud de la Bretagne II (France), Sorlige Nordsjo II (Norway). Each of these sites is summarized in the main report while more details about the studies and analyses behind the datasets are provided in the appendix. For seabed conditions, general information about the geotechnical parameters is provided and a baseline is established for the geotechnical parameters and stratigraphy that may be encountered on the sites. A set of six 'synthetic cases' is defined as building blocks providing the different parameters required for design under each case/soil condition. For the coastal infrastructure, general information about the main requirements is provided that a port should comply with to provide a satisfactory service during the construction of floating offshore wind arrays. Minimum port infrastructural requirements are provided for three types of ports.

17 WIND ENERGY↗

MRCI Subtask 2.1: Defining Sub-Regional Carbon Storage Systems Final Technical Summary Report

In order to assess the regional and subregional geologic framework of the MRCI area and expand carbon dioxide (CO2) storage characterization efforts in this larger region, the current state of geologic knowledge relative to carbon storage (CS) has been summarized by compiling available geologic data and interpretive results into a centralized resource under Subtask 2.1. The MRCI region is a large area, which includes (1) part of the Forest City Basin and Western Arches, (2) Illinois Basin, (3) Upper Mississippi Embayment, (4) Michigan Basin, (5) Central Arches, (6) Appalachian Basin, and (7) Atlantic Coastal Plain and West Atlantic basins. Basins and arches are subdivided into areas of similar geology based on geologic structures and state-specific stratigraphic nomenclature. A concerted effort was made to present the current understanding of rock-unit stratigraphy in the subsurface of each basin and arch region (and subdivisions therein). Rock units are characterized based on their relative CS potential (saline reservoirs, confining intervals, etc.) within CS systems. CS systems are defined by regional confining units (usually thick, widespread shales), and contain all reservoirs and strata between the regional confining units. Report Authors – Steve Greb and Tom Sparks (Kentucky Geological Survey), Mark Kelley, Sanjay Mawalkar, John Hershberger, Priya Ravi Ganesh, Derrick James, and Stuart Skopec (Battelle), Charles Bopp, Yaghoob Lasemi and Hannes Leetaru (deceased) (Illinois State Geological Survey), Kristin Carter (Pennsylvania Geological Survey), William Harrison (Michigan Geological Repository for Research and Education – Michigan Geological Survey), Susan Pool (West Virginia Geological and Economic Survey), James McDonald (Ohio Geological Survey), John Schmelz (Rutgers University), Ryan Clark (Iowa Geological Survey). Other Technical Contributors – Seth Carpenter and John Hickman (Kentucky Geological Survey), Jessica Moore, Eric Lewis, Philip Dinterman, Timothy Vance, and Gary Daft (West Virginia Geological and Economic Survey), Michele Cooney, Robin Anthony, Cheyenne Woodward, and Katherine Schmid (Pennsylvania Geological Survey), Autumn Haagsma and Amber Conner (Michigan Geological Repository for Research and Education – Michigan Geological Survey), Kenneth Miller (Rutgers University), Ashley Douds and Valerie Beckham-Feller (Indiana Geological & Water Survey), Michael Solis (Ohio Geological Survey).

Appalachian,Arches,Forest City,Illinois,MRCI,Michi↗

AEOLIAN INTERDUNE FACIES OF THE NAVAJO SANDSTONE, UTAH

During the Early Jurassic an extensive desert environment covered a large area of the Western Interior of the USA. The Navajo Sandstone erg is thought to be one of the largest dunefields preserved in the rock record, estimated to have covered well over 500,000 km2, though the preserved extent is less due to erosion. The Navajo Sandstone outcrops extensively in eastern and southern Utah, forming spectacular domes and arches, including those in Arches National Park. Navajo Sandstone aeolian dunes consist of stacked, tabular sandstone bodies, displaying steeply dipping crossbedding, and are on average 15 m thick, with high porosity and permeability. In addition to these extensive paleodunes, interdune deposits are also documented, consisting of lensoid sandstone or pale grey limestone, of approximately 1-7 m thick. This research forms part of a broader investigation into the Navajo Sandstone in Utah, focusing on its potential as a CO2 reservoir. The internal stratigraphy of the Navajo Sandstone can be complex, with multiple types of aeolian surfaces present including discontinuous inter-dune contacts, and inclined bedding planes associated with large climbing dunes. Interdune deposits may be associated with more laterally extensive stratigraphic surfaces, highlighting their importance in the internal stratigraphic framework of the Navajo Sandstone erg. Here we interpret facies and depositional processes of aeolian interdune deposits of the Navajo Sandstone throughout Utah, using well log, outcrop, and thin sections. Interdune deposits range in type from short lived, small ponds of predominantly reworked aeolian sediment, to comparatively long-lived oases consisting of lakes with extensive ecosystems. This project aims to increase our understanding of an important potential CO2 reservoir, and enhance understanding of stratigraphic complexity within one of the world's most significant aeolian systems.

Mahon, Elizabeth (ORCID:0000000252692454)↗

Shallow Marine High-Resolution 3D Seismics for Above-Zone CO2 Monitoring: A Case Study in Offshore Japan

Shallow marine high-resolution 3D (HR3D) seismic utilizes a novel seismic acquisition technology for imaging fine geological features not revealed by conventional 3D surveys. HR3D technology has been previously used for shallow subsurface studies, however is rarely implemented for monitoring injected fluids, and has not previously been used to monitor an active CO2 storage project. In this study, we for the first time demonstrate the acquisition, processing and initial interpretation of a HR3D seismic survey in Tomakomai, offshore Japan, where a large-scale CO2 storage project is being undertaken. As a seismic monitoring tool, the HR3D survey images the geologic overburden (< 1000 ms), aiming to detect potential CO2 leakage pathways above the injection reservoir. The HR3D acquisition system comprises a 210 in3 GI air gun and 4 streamers that are 25 m in length with 10 m inline separation. Each streamer has 8 channels with a 3.125 m group interval, yielding a very small final bin size of 3 x 3 m. The short offset and low-fold coverage of the HR3D data creates new challenges in seismic data processing, which demands a different data processing workflow tailored to the HR3D acquisition. We present a data processing workflow involving multiple software processing packages, which tackled high-resolution related static issues and significantly reduced various noise elements. Dip-steering and structural filtering were employed on the stacked volume to further enhance the lateral coherence and to remove random noise and suppress acquisition footprints. The final volume shows flat and coherent above-zone stratigraphy, suggesting a good seal quality above the CO2 reservoir. The successful implementation of HR3D acquisition and the customized processing workflow verify the feasibility of HR3D seismics for the above- zone monitoring of offshore CO2 injection and storage projects.

Feng, Ye Erickson↗

SHALLOW MARINE HIGH-RESOLUTION 3D SEISMICS FOR ABOVE- ZONE CO2MONITORING: A CASE STUDY IN OFFSHORE JAPAN

Shallow marine high-resolution 3D (HR3D) seismic utilizes a novel seismic acquisition technology for imaging fine geological features not revealed by conventional 3D surveys. HR3D technology has been previously used for shallow subsurface studies, however is rarely implemented for monitoring injected fluids, and has not previously been used to monitor an active CO2 storage project. In this study, we for the first time demonstrate the acquisition, processing and initial interpretation of a HR3D seismic survey in Tomakomai, offshore Japan, where a large-scale CO2 storage project is being undertaken. As a seismic monitoring tool, the HR3D survey images the geologic overburden (< 1000 ms), aiming to detect potential CO2 leakage pathways above the injection reservoir. The HR3D acquisition system comprises a 210 in3 GI air gun and 4 streamers that are 25 m in length with 10 m inline separation. Each streamer has 8 channels with a 3.125 m group interval, yielding a very small final bin size of 3 x 3 m. The short offset and low-fold coverage of the HR3D data creates new challenges in seismic data processing, which demands a different data processing workflow tailored to the HR3D acquisition. We present a data processing workflow involving multiple software processing packages, which tackled high-resolution related static issues and significantly reduced various noise elements. Dip-steering and structural filtering were employed on the stacked volume to further enhance the lateral coherence and to remove random noise and suppress acquisition footprints. The final volume shows flat and coherent above-zone stratigraphy, suggesting a good seal quality above the CO2 reservoir. The successful implementation of HR3D acquisition and the customized processing workflow verify the feasibility of HR3D seismics for the above-zone monitoring of offshore CO2 injection and storage projects.

Feng, Ye E.↗