Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “State estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Coupled Inertial Navigation and Flush Air Data Sensing Algorithm for Atmosphere Estimation

This paper describes an algorithm for atmospheric state estimation that is based on a coupling between inertial navigation and flush air data sensing pressure measurements. In this approach, the full navigation state is used in the atmospheric estimation algorithm along with the pressure measurements and a model of the surface pressure distribution to directly estimate atmospheric winds and density using a nonlinear weighted least-squares algorithm. The approach uses a high fidelity model of atmosphere stored in table-look-up form, along with simplified models of that are propagated along the trajectory within the algorithm to provide prior estimates and covariances to aid the air data state solution. Thus, the method is essentially a reduced-order Kalman filter in which the inertial states are taken from the navigation solution and atmospheric states are estimated in the filter. The algorithm is applied to data from the Mars Science Laboratory entry, descent, and landing from August 2012. Reasonable estimates of the atmosphere and winds are produced by the algorithm. The observability of winds along the trajectory are examined using an index based on the discrete-time observability Gramian and the pressure measurement sensitivity matrix. The results indicate that bank reversals are responsible for adding information content to the system. The algorithm is then applied to the design of the pressure measurement system for the Mars 2020 mission. The pressure port layout is optimized to maximize the observability of atmospheric states along the trajectory. Linear covariance analysis is performed to assess estimator performance for a given pressure measurement uncertainty. The results indicate that the new tightly-coupled estimator can produce enhanced estimates of atmospheric states when compared with existing algorithms.

Karlgaard, Christopher D.↗
NASA NTRS1983

On-board estimation technology for space station - Current status and future developments.

Design considerations and projected solutions to on-board automated estimation techniques for advanced technology controls on a space station are described, with emphasis on the state estimator. The space station is modelled as a collection of rigid and flexible bodies connected at a finite number of hinges. The systems dynamics are characterized by angular velocities of the base body, gimbal angles, and deflections of the flexible appendages. The state estimator evolution is projected to occur in four generations, with the first being control logic in the Viking and Voyager spacecraft, the second in the Shuttle and Galileo probe, the third being large antennas and the prototype space station, the last, around the year 2000, for the actual space station. Considerations for attitude, ephemeris, shape determination, and position estimation through each generation are discussed.

Rodriguez, G.↗
NASA NTRS2011

Decentralized Observer with a Consensus Filter for Distributed Discrete-Time Linear Systems

This paper presents a decentralized observer with a consensus filter for the state observation of a discrete-time linear distributed systems. In this setup, each agent in the distributed system has an observer with a model of the plant that utilizes the set of locally available measurements, which may not make the full plant state detectable. This lack of detectability is overcome by utilizing a consensus filter that blends the state estimate of each agent with its neighbors' estimates. We assume that the communication graph is connected for all times as well as the sensing graph. It is proven that the state estimates of the proposed observer asymptotically converge to the actual plant states under arbitrarily changing, but connected, communication and sensing topologies. As a byproduct of this research, we also obtained a result on the location of eigenvalues, the spectrum, of the Laplacian for a family of graphs with self-loops.

embedded consensus↗
DOE OSTI2026

Risk-Aware Measurement Synchronization and Recovery for DSSE With Heterogeneous Data Sources

Power distribution systems are increasingly integrating heterogeneous sensors with varying data reporting rates and types, which pose challenges to achieving observability at the desired temporal resolution of distribution system state estimation (DSSE). Multisensor failures caused by extreme events exacerbate these issues, introducing substantial uncertainties into DSSE. This article proposes a novel solution to these challenges by ensuring high-resolution system observability despite heterogeneous data sources and multisensor failures. First, a deep learning architecture combining long short-term memory (LSTM) and graph convolutional network (GCN) is employed to synchronize meters with different reporting rates, aiming to achieve system observability. A random-walk-model-based approach is introduced to generate pseudo-measurements while properly characterizing their uncertainties under multisensor failures. Finally, a disaster-risk-informed observability metric (RiOM) is defined to quantify the uncertainty associated with state estimation results. The proposed framework offers deeper insights into the system observability on the fly compared with conventional analysis. The effectiveness of the framework is demonstrated on an IEEE standard test case and a large-scale real-world distribution feeder in mid-Minnesota in the U.S.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1991

Integrated adaptive filtering and design for control experiments of flexible structures

A novel method is presented of identifying a state space model and a state estimator for linear stochastic systems from input and output data. The method is primarily based on the relations between the state space model and the finite difference model for linear stochastic systems derived through projection filters. It is proven that least squares identification of a finite difference model converges to the model derived from the projection filters. System pulse response samples are computed from the coefficients of the finite difference model. In estimating the corresponding state estimator gain, a z-domain method is used. First the deterministic component of the output is subtracted out, and then the state estimator gain is obtained by whitening the remaining signal. Experimental example is used to illustrate the feasibility of the method.

Huang, Jen-Kuang↗
NASA NTRS2016

Coupled Inertial Navigation and Flush Air Data Sensing Algorithm for Atmosphere Estimation

This paper describes an algorithm for atmospheric state estimation based on a coupling between inertial navigation and flush air data-sensing pressure measurements. The navigation state is used in the atmospheric estimation algorithm along with the pressure measurements and a model of the surface pressure distribution to estimate the atmosphere using a nonlinear weighted least-squares algorithm. The approach uses a high-fidelity model of atmosphere stored in table-lookup form, along with simplified models propagated along the trajectory within the algorithm to aid the solution. Thus, the method is a reduced-order Kalman filter in which the inertial states are taken from the navigation solution and atmospheric states are estimated in the filter. The algorithm is applied to data from the Mars Science Laboratory entry, descent, and landing from August 2012. Reasonable estimates of the atmosphere are produced by the algorithm. The observability of winds along the trajectory are examined using an index based on the observability Gramian and the pressure measurement sensitivity matrix. The results indicate that bank reversals are responsible for adding information content. The algorithm is applied to the design of the pressure measurement system for the Mars 2020 mission. A linear covariance analysis is performed to assess estimator performance. The results indicate that the new estimator produces more precise estimates of atmospheric states than existing algorithms.

Karlgaard, Christopher D.↗
DOE OSTI2022

Dynamic signal recovery in distribution grids using compressive lossy measurements

Distribution system state estimation requires reliable aggregation of the measured data. However, the large volume of the measured data imposes a significant stress on the underlying communication infrastructure. With the challenges associated with measurement availability, current distribution systems are typically unobservable. To cope with the unobservability issue, compressive sensing theory allows us to recover system state information from a small number of measurements provided the states of the distribution system exhibit sparsity. In this paper, we evaluate the robustness of an updated Kalman filtered modified compressive sensing (KF-ModCS) technique that dynamically estimates the grid states using a small fraction of measured data. In practice, measurements used for sparsity based state estimation may also be intermittent due to communication network induced losses. Further, to understand the effect of packet losses on KF-ModCS, we provide an upper bound for the expected variances of the state estimation error for a given rate of information loss. This upper bound is further improved if the support set of the sparse signal that characterizes the state dynamics does not change over time and/or the reduced model is observable. Simulations based on two practical data sets collected from actual customers in a distribution grid validate the theoretical results.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1991

GPS interferometric attitude and heading determination - Flight test results

Methods and results for realtime pitch, roll, and heading determination of a dynamic flexible platform are presented. Consideration is given to a GPS attitude and heading determination system installed in Ohio University's Douglas DC-3 research aircraft. Signals from four antennas are processed by an Ashtech 3DF 24-channel GPS receiver. Data from the receiver are sent to a microcomputer for storage and further computations. Attitude and heading data are sent to a second computer for display on a software generated artificial horizon. Demonstration of this technique proves its candidacy for augmentation of aircraft state estimation for flight control and navigation as well as for numerous other applications, such as reliable aircraft state estimation, measurement of structural flexing of large space structures, synthetic aperture radar, aerial photogrammetry, pointing systems, spacecraft attitude control, rendezvous and docking, and road mapping.

Van Graas, Frank↗
NASA NTRS1991

Fault detection and isolation for multisensor navigation systems

Increasing attention is being given to the problem of erroneous measurement data for multisensor navigation systems. A recursive estimator can be used in conjunction with a 'snapshot' batch estimator to provide fault detection and isolation (FDI) for these systems. A recursive estimator uses past system states to form a new state estimate and compares it to the calculated state based on a new set of measurements. A 'snapshot' batch estimator uses a set of measurements collected simultaneously and compares solutions based on subsets of measurements. The 'snapshot' approach requires redundant measurements in order to detect and isolate faults. FDI is also referred to as Receiver Autonomous Integrity Monitoring (RAIM).

Kline, Paul A.↗
NASA NTRS2012

Model-Based Method for Sensor Validation

Fault detection, diagnosis, and prognosis are essential tasks in the operation of autonomous spacecraft, instruments, and in situ platforms. One of NASA s key mission requirements is robust state estimation. Sensing, using a wide range of sensors and sensor fusion approaches, plays a central role in robust state estimation, and there is a need to diagnose sensor failure as well as component failure. Sensor validation can be considered to be part of the larger effort of improving reliability and safety. The standard methods for solving the sensor validation problem are based on probabilistic analysis of the system, from which the method based on Bayesian networks is most popular. Therefore, these methods can only predict the most probable faulty sensors, which are subject to the initial probabilities defined for the failures. The method developed in this work is based on a model-based approach and provides the faulty sensors (if any), which can be logically inferred from the model of the system and the sensor readings (observations). The method is also more suitable for the systems when it is hard, or even impossible, to find the probability functions of the system. The method starts by a new mathematical description of the problem and develops a very efficient and systematic algorithm for its solution. The method builds on the concepts of analytical redundant relations (ARRs).

Vatan, Farrokh↗
NASA NTRS1974

Control optimization of a lifting body entry problem by an improved and a modified method of perturbation function

A study of the solution problem of a complex entry optimization was studied. The problem was transformed into a two-point boundary value problem by using classical calculus of variation methods. Two perturbation methods were devised. These methods attempted to desensitize the contingency of the solution of this type of problem on the required initial co-state estimates. Also numerical results are presented for the optimal solution resulting from a number of different initial co-states estimates. The perturbation methods were compared. It is found that they are an improvement over existing methods.

Garcia, F., Jr.↗
NASA NTRS1989

Experiments with the KITE attitude control simulator

Simulation experiments are conducted to test an attitude control technique for tethered satellites using the tether tension force to generate control torques by moving the tether attach point relative to the satellite center of mass. A scaled, one-dimensional, air-bearing supported laboratory simulation of the Kinetic Isolation Tether Experiment shows that the attitude of the simulator can be regulated to within 0.75 arcsec with a bandwidth of about 0.1 Hz. The control design includes a state estimator to calculate the vehicle mass center and to calculate the effect of the stepper motor dynamics on the state estimate. Results are presented from closed-loop attitude control experiments to verify the attitude control technique.

Powell, J. David↗
NASA NTRS1991

Formulation of the linear model from the nonlinear simulation for the F18 HARV

The F-18 HARV is a modified F-18 Aircraft which is capable of flying in the post-stall regime in order to achieve superagility. The onset of aerodynamic stall, and continued into the post-stall region, is characterized by nonlinearities in the aerodynamic coefficients. These aerodynamic coefficients are not expressed as analytic functions, but rather in the form of tabular data. The nonlinearities in the aerodynamic coefficients yield a nonlinear model of the aircraft's dynamics. Nonlinear system theory has made many advances, but this area is not sufficiently developed to allow its application to this problem, since many of the theorems are existance theorems and that the systems are composed of analytic functions. Thus, the feedback matrices and the state estimators are obtained from linear system theory techniques. It is important, in order to obtain the correct feedback matrices and state estimators, that the linear description of the nonlinear flight dynamics be as accurate as possible. A nonlinear simulation is run under the Advanced Continuous Simulation Language (ACSL). The ACSL simulation uses FORTRAN subroutines to interface to the look-up tables for the aerodynamic data. ACSL has commands to form the linear representation for the system. Other aspects of this investigation are discussed.

Hall, Charles E., Jr.↗
NASA NTRS1993

Optimal periodic control for spacecraft pointing and attitude determination

A new approach to autonomous magnetic roll/yaw control of polar-orbiting, nadir-pointing momentum bias spacecraft is considered as the baseline attitude control system for the next Tiros series. It is shown that the roll/yaw dynamics with magnetic control are periodically time varying. An optimal periodic control law is then developed. The control design features a state estimator that estimates attitude, attitude rate, and environmental torque disturbances from Earth sensor and sun sensor measurements; no gyros are needed. The state estimator doubles as a dynamic attitude determination and prediction function. In addition to improved performance, the optimal controller allows a much smaller momentum bias than would otherwise be necessary. Simulation results are given.

Pittelkau, Mark E.↗
NASA NTRS2000

Robust Fault Detection for Aircraft Using Mixed Structured Singular Value Theory and Fuzzy Logic

The purpose of fault detection is to identify when a fault or failure has occurred in a system such as an aircraft or expendable launch vehicle. The faults may occur in sensors, actuators, structural components, etc. One of the primary approaches to model-based fault detection relies on analytical redundancy. That is the output of a computer-based model (actually a state estimator) is compared with the sensor measurements of the actual system to determine when a fault has occurred. Unfortunately, the state estimator is based on an idealized mathematical description of the underlying plant that is never totally accurate. As a result of these modeling errors, false alarms can occur. This research uses mixed structured singular value theory, a relatively recent and powerful robustness analysis tool, to develop robust estimators and demonstrates the use of these estimators in fault detection. To allow qualitative human experience to be effectively incorporated into the detection process fuzzy logic is used to predict the seriousness of the fault that has occurred.

Collins, Emmanuel G.↗
NASA NTRSDate not supplied

Distributed Pressure Sensing for Enabling Self-Aware Autonomous Aerial Vehicles

Autonomous aerial transportation will be a fixture of future robotic societies, simultaneously requiring more stringent safety requirements and fewer resources for characterization than current commercial air transportation. More robust, adaptable, self-state estimation will be necessary to create such autonomous systems. We present a modular, scalable, distributed pressure sensing skin for aerodynamic state estimation of a large, flexible aerostructure. This skin used a network of 22 nodes that performed in-situ computation and communication of data collected from 74 pressure sensors, which were embedded into the skin panels of an ultra-lightweight 14-foot wingspan made from commutable, lattice-based subcomponents, and tested at NASA Langley Research Center's 14X22 wind tunnel. The density of the pressure sensors allowed for the use of a novel distributed algorithm to generate estimates of the wing lift contribution that were more accurate than the direct integration of the pressure distribution over the wing surface.

Daniel Cellucci↗
NASA NTRS1989

An analytic development of orbit determination for a distant, planetary orbiter

With the advent of the Mariner '71 Mission, NASA has been sending spacecraft to orbit various distant bodies within the solar system. At present, there is still no adequate theory describing the inherent state estimation accuracy, based on two-way, coherent range-rate data. It is the purpose of this article to lay the groundwork for a general elliptic theory, and in addition to provide an analytic solution for the special case of circular orbits. It is shown that circular orbits about distant planets may suffer singularities in over-all position error estimation. These singularities are due to orbit inclination, placement of the line-of-nodes, and insignificant cross-velocity at the start and end of retrograde motion when orbiting a superior planet. Even though these conclusions appear to yield poor state estimation, one should not be unduly alarmed inasmuch as the stated conditions for singularity are not maintained for extended periods during typical mission scenarios. However, mission analysts should be aware of these potential pitfalls and realize that spuriously large results for circular orbiters can be obtained and are not the result of incorrect assumptions or faulty software. The general elliptic problem appears so involved that analytic inversion at this time is just not feasible, and in any case the resulting expression for the position error would likely be so lengthy that any understanding would be lost in the maze.

Russell, R. K.↗