SEARCH · Engineering Papers

Results for “Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Sodium doping of solution-processed amine-thiol based CIGS solar cells by thermal evaporation of NaCl

Poor crystallinity, high degree of porosity and rough surfaces are the main drawbacks of solution-processed CIGS absorbers resulting in lower power conversion efficiencies when compared to vacuum-based CIGS solar cells. Therefore, promoting absorber grain growth is key to further improve solution-based solar cell performance. The effect of alkali elements such as Na in CIGS absorbers is generally recognised to have beneficial effects not only on the absorber opto-electronic properties but also on the grain growth. In this work, thermal evaporation of a thin layer of NaCl prior to selenisation resulted in absorbers with significantly larger CIGS grains than previously seen with Na diffusing directly from the from soda-lime glass substrate. NaCl is non-toxic, abundant and readily available compound that has not been typically used as an evaporation source, but rather as an additive into CIGS precursor solution. The effect of Na on these solution-processed CIGS devices was primarily observed in the spectacular morphological changes leading to improved carrier collection and minority carrier lifetimes, but less on the absorber doping. Transmission electron microscopy (TEM) revealed voids forming around large CIGS grains upon NaCl addition and these had a negative effect on inter-grain carrier transport. Nonetheless, the resulting device performance doubled from 5% to 10% with addition of Na using this doping approach; however, a compromise between the optimum grain growth and optimum electronic properties had to be made. This study demonstrates a novel, simple and effective Na-doping strategy for CIGS absorbers and reveals the current limitations of the Na-doping in solution-processed atmospherically deposited cells.

14 SOLAR ENERGY↗

DOE OSTI2022

Microscale THMC Modeling of Pressure Solution in Salt Rock: Impacts of Geometry and Temperature

Abstract Pressure solution, a mechanism that involves tight coupling between the geometry and thermal-hydro-mechanical-chemical (THMC) processes, plays an important role in diagenesis. In this study, we make the first attempt to conduct microscale THMC modeling to understand and quantify the impacts of geometry and temperature on pressure solution, taking natural salt rock as an example. This modeling capability is achieved by expanding a novel MC code that we developed previously (Hu et al. J Geophys Res: Solid Earth 126:e2021JB023112, 2021) to include temperature effects. We first conduct a simulation of an example that involves a single brine inclusion within a single halite grain and find that the temperature impact is limited for that case. We then extract geometry from an image of a natural salt rock and conduct simulations with different cases: (A) only temperature and no stress, (B) only stress and no temperature, and (C) with both stress and temperature. These different cases result in quite different phenomena. In case A, dissolution and precipitation occur across the entire system due to isolated pore space reaching a localized mass balance between dissolution, precipitation, and diffusion. In case B, intense geometric features (e.g., major asperities, inclusions) in one area undergo stress concentration, thus dominating pressure solution in that area. In case C, pressure solution is spread out at contacting highly stressed geometric features close to the hotter side. We conclude that geometric features dominate stress distribution, thus dominating pressure solution in a natural salt rock that may be affected by the temperature if a sufficient temperature gradient is applied.

58 GEOSCIENCES↗

DOE OSTI2024

Design Solutes to Achieve Columnar-to-Equiaxed Transition and Grain Refinement in Cast Multi-principal-element Alloys

The multi-principal-element alloys (MPEAs), also referred to as high-entropy alloys (HEAs), have attracted extensive attention during the last decade and a half due to their unique and excellent properties. However, many MPEAs show coarse and anisotropic columnar grains in the as-cast state. While constitutional supercooling (CS)-driven parameters have been widely used to evaluate and predict the effect of solutes on columnar-to-equiaxed transition (CET) and grain refinement of diluted binary alloys, similar studies are lacking on MPEAs. Due to the multiple solute elements (solutes) and their high concentrations, the CS-driven parameters for MPEAs are different from those proposed for diluted binary alloys. Here, we derived the CS-driven parameters, including undercooling parameter and growth restriction factor, for MPEAs based on their physical significances, with the help of calculated phase diagrams. The calculated CS-driven parameters were then used to predict the effect of a solute on CET and grain refinement in NiCoFeCr MPEAs. Additional alloying solutes Nb, Ti, and V in the NiCoFeCr MPEA were also evaluated for their different CS-driven characteristics. In this study, the grain size of the as-solidified microstructures of NiCoFeCr with and without Nb, Ti, and V were compared and interpreted with the predicted tendency of the CS-driven parameters.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Controlling solute channel formation using magnetic fields

Solute channel formation introduces compositional and microstructural variations in a range of processes, from metallic alloy solidification, to salt fingers in ocean and water reservoir flows. Applying an external magnetic field interacts with thermoelectric currents at solid/liquid interfaces generating additional flow fields. This thermoelectric (TE) magnetohydrodynamic (TEMHD) effect can impact on solute channel formation, via a mechanism recently drawing increasing attention. To investigate this phenomenon, we combined in situ synchrotron X-ray imaging and Parallel-Cellular-Automata-Lattice-Boltzmann based numerical simulations to study the characteristics of flow and solute transport under TEMHD. Observations suggest the macroscopic TEMHD flow appearing ahead of the solidification front, coupled with the microscopic TEMHD flow arising within the mushy zone are the primary mechanisms controlling plume migration and channel bias. Two TE regimes were revealed, each with distinctive mechanisms that dominate the flow. Further, we show that grain orientation modifies solute flow through anisotropic permeability. These insights led to a proposed strategy for producing solute channel-free solidification using a time-modulated magnetic field.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Analytical solution for partial heating on the exterior of the pipe with application to measuring fluid flow rate

An analytical model using Green’s functions for partial external heating of a pipe is developed, which results in an exact mathematical solution for the radial and axial temperature distribution in the pipe wall. Partial heating consists of a constant heat flux function imposed over a small section of the exterior of a pipe and for a limited time duration. The solution comprises steady-state and transient parts, and an algebraic identity is used to decrease the number of summation terms in the slowly-converging steady- state part. Intrinsic verification principles are used to verify the solution. As an example application, this transient solution is applied toward the development of a simple, noninvasive method for in-field measurement of the flow rate in pipes. Furthermore, to simulate this application, a pulse of energy is imposed to the wall of the pipe, and the developed mathematical solution is used to find the flow rate of the fluid inside the pipe. An optimal experiment is designed to find the best measurement location and time.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2026

Lattice-scale variations in viscosity are correlated with solution structure at mineral-water interfaces

At solid-liquid interfaces, the viscosity increases markedly from the bulk due to the collective interactions of ions and water molecules, influencing phenomena relevant to nanofluidics, colloidal dynamics, and electrochemistry. Here, in this study, we investigated dissipative forces at the boehmite-water interface using 3D atomic force microscopy. We observed an increase in interfacial solution viscosity, η, by 10-100-fold as the nanoprobe approached the surface in normal direction, with up to four oscillatory features showing average peaks of η/η bulk = 44-71. Moreover, the viscosity showed sub-nanometer variations within 0.5 nm from the interface, templated by the underlying crystal lattice and correlated with the interfacial solution structure. Beyond a near-wall region of approximately 1.2 nm, the dissipative response was comparable to that in bulk solution. Molecular dynamics simulations, along with statistical mechanical analyses, provided details on hydrodynamic structures near the interface. Specifically, the lattice-dependent dissipative responses are correlated with extensive hydrogen bonding by interfacial water molecules, which increased friction, particularly along the [001] direction. These results demonstrate how solution viscosity at mineral-water interfaces is anisotropic and correlated with the local solution structure, providing insights into the dynamics of nanocrystal attachment.

Viscosity↗

DOE OSTI2021

Multicomponent pyrochlore solid solutions with uranium incorporation – A new perspective of materials design for nuclear applications

Multicomponent pyrochlore solid solutions with and without uranium incorporation were fabricated and their thermal-mechanical properties were characterized. Multicomponent pyrochlore solid solutions without uranium exhibit comparable thermal conductivity and higher mechanical strength compared to baseline single component rare-earth titanate pyrochlore (A 2 Ti 2 O 7 ). Uranium incorporation reduces hardness as compared with single component compositions. High entropy pyrochlore with uranium displays the highest thermal conductivity within multicomponent pyrochlore solid solutions with significantly better mechanical properties than UO 2 . The measured thermal conductivity correlates well with A-site cation mixing entropy and a modified size disorder parameter, and thus the size disorder and mixing entropy could be good indicators for predicting thermal conductivity of multicomponent pyrochlore solid solutions. This work opens up the possibility of designing multicomponent oxide solid solutions by controlling their chemical disorder/mixing entropy to achieve acceptable thermal-mechanical properties, desired radiation and corrosion performance for potential nuclear waste form and inert matrix fuel applications.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2024

A model for trapping and re-solution regarding intra-granular bubbles in UO 2 , linked to atomic-scale simulations

In the literature, a clear definition of the irradiation re-solution frequency of gas from bubbles in the UO 2 fuel is absent. Moreover, for intra-granular bubbles, a detailed calculation of the cumulated displaced gas quantities in function of the distance from the radius of the bubble after a re-solution event has never been published. The assessment of these two elements is very useful if we want to increase the adherence of fission gas release codes to our present knowledge of the behavior of fission gases. Hence, we suggest to link the definition of the re-solution frequency to atomic-scale simulations. Furthermore, we present the cumulated displaced gas quantities obtained from Molecular Dynamics calculations, from which we have derived a re-solution profile that can be exploited to better consider the irradiation re-solution phenomenon inside Fission Gas Release codes. On top of that, we have built a new trapping/re-solution model for intra-granular bubbles linked to Molecular Dynamics simulations that can be easily incorporated into Fission Gas Release codes. In conclusion, we also check that the model is properly built through the comparison of the new model against a reference.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2025

The role of excess vacancies in stabilizing solute clusters in low-alloy steels

The formation of solute clusters in irradiated low-alloy steels, such as reactor pressure vessel steels, is a critical cause of radiation hardening and embrittlement. However, the chemical interactions among solute elements and excess vacancies remain to be fully understood. This study employs density functional theory, cluster expansion, and lattice-based Monte Carlo simulations to examine the stability and morphology of nano-size coherent solute clusters with excess vacancies. The findings reveal that excess vacancies are crucial in stabilizing and promoting the growth of Mn-Ni-Si-vacancy clusters. A minimum of seven vacancies is required for stable nucleation and growth of these clusters. These Mn-Ni-Si clusters act as defect sinks, effectively trapping and absorbing mobile vacancies generated under irradiation. Furthermore, phosphorus (P) preferentially dissolves in Mn-Ni-Si clusters due to chemical coupling with vacancies. In conclusion, this study offers new insights into solute-vacancy interactions, enhancing our understanding of solute-defect cluster formation and embrittlement in low-alloy steels.

36 - MATERIALS SCIENCE↗

DOE OSTI2023

Single-Molecule Fluorescence Investigations of Solute Transport Dynamics in Nanostructured Membrane Separation Materials

Many materials used for membrane separations comprise of nanoscale structures such as pores and domains. Such nanostructures often control the solute permeability and selectivity of separation membranes. Thus, for future development of highly efficient separation membranes, it is important to understand the structural and chemical properties of these nanostructures, and also their influences on solute transport dynamics. For the last two decades, single-molecule fluorescence techniques have been used to measure the detailed dynamics of solute molecules diffusing in various nanostructured materials, giving valuable insights into molecular transport mechanisms influenced by nanoscale material heterogeneity. This Perspective will discuss recent single-molecule fluorescence studies on solute diffusion in materials relevant to membrane separations, including dense polymer films and nanoporous materials. These studies have revealed the formation and properties of nanostructures, and unique transport dynamics of solute molecules manipulated by their confinement and partitioning to the nanostructures, which play key roles in membrane separations. Furthermore, this Perspective will also point out scientific challenges toward thorough understanding of molecular-level mechanisms in membrane separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Nonlinear Scaling of Water–Ion Interactions and Dynamics in Alkaline Solutions

Water-ion interactions govern many solvent properties critical to solution-phase chemistry and the behavior of liquid water. The water-ion interactions in alkaline conditions were probed using two-dimensional infrared spectroscopy (2D IR), small-angle x-ray scattering (SAXS), and nuclear magnetic resonance spectroscopy (NMR). Energy transfer between the donor molecule KSeCN, used as a 2D IR probe, and the acceptor molecule NaOD was used to track the average separation distance of ions in a D 2 O solution, while SAXS measurements showed effects in the bulk D 2 O solvent. Here, we observe consistent nonlinear scaling in the SeCN - and OD - average separation distance as a function of NaOD concentration while bulk solution D 2 O-to-D 2 O average separation distance remained highly linear. Ultrafast measurements of solution dynamics via 2D IR and polarization-selective pump-probe spectroscopy show consistent scaling in correlation times as a function of concentration. These results suggests that the SeCN - and OD - anions participate in a water-ion network that significantly reduces the degrees of freedom for the distribution of ions in solution below the standard stochastic for ion distribution.

2D IR Spectroscopy↗

DOE OSTI2022

Novel superposed kinklike and pulselike solutions for several nonlocal nonlinear equations

In this work, we show that a number of nonlocal nonlinear equations, including the Ablowitz–Musslimani and Yang variant of the nonlocal nonlinear Schrödinger (NLS) equation, the nonlocal modified Korteweg de Vries (mKdV) equation, and the nonlocal Hirota equation, admit novel kinklike and pulselike superposed periodic solutions. Furthermore, we show that the nonlocal mKdV equation also admits the superposed (hyperbolic) kink–antikink solution. In addition, we show that while the nonlocal Ablowitz–Musslimani variant of the NLS admits complex parity-time reversal-invariant kink and pulse solutions, neither the local NLS nor the Yang variant of the nonlocal NLS admits such solutions. Finally, except for the Yang variant of the nonlocal NLS, we show that the other three nonlocal equations admit both the kink and pulse solutions in the same model.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2026

Semi-analytic solutions to the Noh problem with a black box EoS

The objective of this paper is to derive a method of constructing semi-analytic solutions to the Noh problem when the equation of state is a black box. Such solutions can be used for verification tests of hydrodynamics codes. We present the underlying theory, the method for finding solutions, and several examples of derived semi-analytic solutions. We end by performing a classic verification convergence test comparing numerical results from a hydrodynamics code against a non-trivial semi-analytic solution.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Development of Modified Perturbation Solutions to the One-Phase Stefan Problems With a Convective Boundary

The classical Stefan problem is used to track the moving solid-liquid interface during the freezing process. Perturbation theory has often been applied to find an approximate analytical solution due to the nonlinearity of the moving interface. However, the Stefan number (i.e., the sensible over latent heat) must be small and usually less than 0.01 to assume the perturbation expansion, which in turn limits the thermal engineering applications. In this study, a modified perturbation solution is developed by adding a correction term after the leading-order solution to be valid for a much wider range of Stefan numbers (i.e., 0.01 less than or equal to Ste less than or equal to 1). Specifically, a one-phase Stefan problem is first formulated subjected to a convective boundary in the Cartesian, cylindrical, and spherical coordinate systems for inward solidification. The leading-order solution is calculated based on the regular perturbation theory, while the correction term is obtained using the Monte-Carlo method and a multi-variant regression. Results show that the correction term has a linear relationship with the Stefan number and is not significantly influenced by the Biot number. The proposed modified perturbation solution can accurately and rapidly predict the nonlinear moving interface motion for the freezing process.

DIRECT ENERGY CONVERSION,MATHEMATICS AND COMPUTING↗

DOE OSTI2026

Pore-Scale Study on the Positive Feedback Between Stress and Porosity Caused by Pressure Solution in Porous Media

Pressure solution is an important process in the evolution of sedimentary rocks, which provide storage space for most of our petroleum resources. It directly influences the generation, migration, and storage of petroleum fluids in subsurface sedimentary rocks. Here, in this paper, we develop a pore-scale, mechanochemical model to demonstrate a possible positive feedback between the local porosity and pore surface stress, in which a higher local porosity causes a higher local pore surface stress, thus enhancing pressure solution and consequently further increasing the local porosity. Pore surface stress represents stress on a solid grain adjacent to a pore. Specifically, the pore-scale, mechanochemical model directly simulates the stress distribution over solid and pore surfaces using a finite element model. The dissolution of solids at the solid-pore interfaces under a far-from-equilibrium condition is simulated using a first-order kinetics model that accounts for the local stress distribution. The updated pore geometry, caused by pore surface dissolution, is then used in the stress simulation in the next numerical iteration. Two types of porous media, the Oriskany sandstone and an artificial porous medium with spherical pores, were tested in the mechanochemical simulation. The positive stress-porosity feedback during pressure solution was observed in both samples. In addition, the model quantitatively illustrated the distribution of local mineral dissolution rates on all pore surfaces, as well as its relation to the effective mineral dissolution rate of the entire sample. Based on the comparison between the two porous media, the local mineral dissolution was regulated by pore space distribution, geometry, and coalescence during pressure solution. This work is the first that uses direct, pore-scale numerical simulation to demonstrate the positive stress-porosity feedback during pressure solution, which has the potential to advance the understanding of the mechanical-chemical (MC) coupling in many geological processes that are relevant to subsurface energy systems, such as the recovery of petroleum hydrocarbons and geothermal energy.

CT scanning↗

DOE OSTI2022

DC-AC Tool: Fully Automating the Acquisition of AC Power Flow Solution

DC2AC is an automated tool for achieving a converged AC power flow solution from any dispatch, e.g., determined using DC power flow model based optimal power flow. The entire process is free of human interference. It is usually encountered in practice that, even with a DC power flow solution, acquiring the solved AC power flow solution, if exists, sometimes could be a challenging task, especially during the planning stage. It is also difficult to distinguish the unsolvable cases from diverging iterations. Manual adjustments to approach the desired power flow condition has been largely relied on in the past using lots of engineering heuristics. This tool provides a systematic way to first achieve a solvable AC power flow case by modifying the power flow condition, and then try to track the AC power flow solution while gradually removing the adopted changes. If all adopted changes can be completely removed, then the original AC power flow solution is obtained. Otherwise, insights for actionable controls are derived to help operation and planning. Currently, this tool has been implemented in Python using SIEMENS PTI PSS/E as power flow solver, where only adjusting generator terminal voltage set point is considered as an available means to try to turn an unsolved power flow to a solved one. In future, more means should be considered, including the operation of tap-changing transformers, switched shunts and redispatch of active power.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2023

Time–Concentration Superposition for Linear Viscoelasticity of Polymer Solutions

The concentration dependence of linear viscoelastic properties of polymer solutions is a well-studied topic in polymer physics. Dynamic scaling theories allow qualitative predictions of polymer solution rheology, but quantitative predictions are still limited to model polymers. Meanwhile, the scaling properties of non-model polymer solutions must be determined experimentally. In present paper, the time–concentration superposition (TCS) of experimental data is shown to be a robust procedure for studying the concentration scaling properties of binary and ternary polymer solutions. TCS can not only identify whether power law scaling may exist or not, and over which concentration range, but also unambiguously estimate the concentration scaling exponents of linear viscoelastic properties for a range of non-model polymer solutions.

42 ENGINEERING↗

DOE OSTI2024

Vacancy-mediated transport and segregation tendencies of solutes in FCC Ni under diffusional creep

Nickel-based alloys are known for their excellent corrosion resistance and high-temperature strength. However, at high temperatures, polycrystals experience grain boundary-stress-driven vacancy diffusion leading to diffusion-driven creep. Understanding the fundamentals of defect migration is essential to predict diffusion creep behavior. In this talk, we explore the Nabarro-Herring diffusion creep and the associated solute segregation that is likely to result from the different diffusivities of the solute and solvent elements. Density functional theory calculations are performed to determine the formation, migration and binding energies of the solute and vacancy defects in stress-free and stressed states. The dilute-limit transport coefficients are then calculated using the self-consistent mean field theory as implemented in the Kinetic Cluster Expansion (KineCluE) code. Predictions of diffusion creep strain rates and solute segregation are then presented for various solutes, stress and temperatures. This work opens research avenues for exploration of diffusion creep via characterization of elemental segregation to grain boundaries.

36 MATERIALS SCIENCE↗