Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Single crystal model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Anisotropic magneto-resistivity and magnetocaloric effect in DyAl 2

Here, in this study, we experimentally and theoretically investigate the correlation between the anisotropic magnetic resistivity and magnetocaloric effect in DyAl 2 single crystals. DyAl 2 crystallizes in the C15 Laves phase structure with cubic symmetry. While some earlier studies revealed that the isothermal entropy change in dialuminides follows a similar trend as the electrical resistivity change as a function of temperature and magnetic field, the correlation between anisotropic behavior of these two physical parameters is yet to be explored to the best of our knowledge. To address this gap, we measured electrical resistivity of DyAl 2 single crystals along two different directions in zero and applied magnetic fields and compared the experimental results with our theoretical model. For the theoretical analysis, we employed a model Hamiltonian in the mean-field approximation, considering the exchange interaction, Zeeman effect, and crystalline electric field associated with the cubic symmetry. Our findings reveal a significant dependence of DyAl 2 resistivity on the direction of the applied magnetic field, in agreement with our theoretical results. These outcomes emphasize the interplay between magnetocaloric effect and magneto-resistivity, underscoring the potential of the magnetocaloric effect as a valuable tool for gaining deeper insights into basic physical properties including electron transport behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Frequency-dependent sensitivity of AC elastocaloric effect measurements explored through analytical and numerical models

We present a comprehensive study of the frequency-dependent sensitivity for measurements of the AC elastocaloric effect by applying both exactly soluble models and numerical methods to the oscillating heat flow problem. These models reproduce the finer details of the thermal transfer functions observed in experiments, considering here representative data for single-crystal Ba(Fe1−xCox)2As2. Based on our results, we propose a set of practical guidelines for experimentalists using this technique. This work establishes a baseline against which the frequency response of the AC elastocaloric technique can be compared and provides intuitive explanations of the detailed structure observed in experiments.

Straquadine, J. A. W. (ORCID:0000000165309541)↗
DOE OSTI2025

Observation of Unprecedented Fractional Magnetization Plateaus in a New Shastry-Sutherland Ising Compound

Geometrically frustrated magnetic systems, such as those based on the Shastry-Sutherland lattice (SSL), offer a rich playground for exploring unconventional magnetic states. The delicate balance between competing interactions in these systems leads to the emergence of novel phases. We present the characterization of Er 2 ⁢Be 2⁢ GeO 7 , an SSL compound with Er 3+ ions forming orthogonal dimers separated by nonmagnetic layers whose structure is invariant under the 𝑃⁢$\bar{4}21$⁢𝑚 space group. Neutron scattering reveals an antiferromagnetic dimer structure at zero field, typical of Ising spins on that lattice and consistent with the anisotropic magnetization observed. However, magnetization measurements exhibit fractional plateaus at 1/4 and 1/2 of saturation, in contrast to the expected 1/3 plateau of the SSL Ising model. By comparing the energy of candidate states with ground-state lower bounds we show that this behavior requires spatially anisotropic interactions, leading to an anisotropic Shastry-Sutherland Ising model symmetric under the 𝐶⁢𝑚⁢𝑚⁢2 space group. This anisotropy is consistent with the small orthorhombic distortion observed with single-crystal neutron diffraction. The other properties, including thermodynamics, which have been investigated theoretically using tensor networks, point to small residual interactions, potentially due to further couplings and quantum fluctuations. This study highlights Er 2 ⁢Be 2 ⁢GeO 7 as a promising platform for investigating exotic magnetic phenomena.

Yadav, Lalit [Duke University, Durham, NC (United ↗
DOE OSTI2021

PyCrystalField : software for calculation, analysis and fitting of crystal electric field Hamiltonians

PyCrystalField is a Python software package for calculating single-ion crystal electric field (CEF) Hamiltonians. This software can calculate a CEF Hamiltonian ab initio from a point charge model for any transition or rare earth ion in either the J basis or the LS basis, perform symmetry analysis to identify nonzero CEF parameters, calculate the energy spectrum and observables such as neutron spectrum and magnetization, and fit CEF Hamiltonians to any experimental data. Here, the theory, implementation and examples of its use are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Towards understanding the magnetic properties of the breathing pyrochlore compound Ba3Yb2Zn5O11through single-crystal studies

Abstract Ba 3 Yb 2 Zn 5 O 11 is exceptional among breathing pyrochlore compounds for being in the nearly-decoupled limit where inter-tetrahedron interactions are weak, hosting isolated clusters or molecular magnet-like tetrahedra of magnetic ytterbium (Yb 3+ ) ions. In this work, we present the study carried out on single-crystal samples of the breathing pyrochlore Ba 3 Yb 2 Zn 5 O 11 , using a variety of magnetometry and neutron scattering techniques along with theoretical modeling. We employ inelastic neutron scattering to investigate the magnetic dynamics as a function of applied field (with respect to both magnitude and direction) down to a temperature of 70 mK, where inelastic scattering reveals dispersionless bands of excitations as found in earlier powder sample studies, in good agreement with a single-tetrahedron model. However, diffuse neutron scattering at zero field and dc-susceptibility at finite field exhibit features suggesting the presence of excitations at low-energy that are not captured by the single tetrahedron model. Analysis of the local structure down to 2 K via pair distribution function analysis finds no evidence of structural disorder. We conclude that effects beyond the single tetrahedron model are important in describing the low-energy, low-temperature physics of Ba 3 Yb 2 Zn 5 O 11 , but their nature remains undetermined.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Reanalysis of X-ray emission from M87. 2: The multiphase medium

In a previous paper, we showed that a single-phase model for the gas around M87 simultaneously explained most available X-ray data. Total enclosed masses derived from the model, however, fell well below the determinations from optical measurements. In this paper, we consider possible solutions to the inconsistency, including two multiphase medium models for the gas and the consequences of systematic errors of the Einstein Focal Point Crystal Spectrometer (FPCS). First, we find that when constraints from optical mass determinations are not considered, the best-fit model to the X-ray data is always the single-phase model. Multiphase models or consideration of FPCS systematic errors are required only when optical mass constraints are included. We find that the cooling time model of White & Sarazin adequately explains the available X-ray data and predicts total masses which agree with optical measurements. An ad hoc power-law multiphase does not. This shows both that the existence of mass dropping out of the ambient phase is consistent with the data and that the cooling-time model gives a reasonable parameterization of the dropout rate. Our derived mass accretion rate is similar to previous determinations. The implications of this result for cluster mass determinations in general are discussed. We then consider 'self absorbing' models where we assume that material dropping out of the ambient medium goes completely into X-ray absorbing gas. The resulting internal absorption is small compared to Galactic absorption at most radii. The models are therefore indistinguishable from models with only Galactic absorption. We finally show that it is alternatively possible to simultaneously fit optical mass measurements and X-ray data with a single-phase model if some of the observed FPCS line fluxes are too high by the maximum systematic error. This possiblity can be checked with new data from satellites such as ASCA.

Tsai, John C.↗
DOE OSTI2023

Spin wave Hamiltonian and anomalous scattering in NiPS 3

Here, we report a comprehensive spin wave analysis of the semiconducting honeycomb van der Waal antiferromagnet NiPS 3 . Using single-crystal inelastic neutron scattering, we map out the full Brillouin zone and fit the observed modes to a spin wave model with rigorously defined uncertainty. We find that the third-nearest-neighbor exchange J 3 dominates the Hamiltonian, a feature which we fully account for by ab initio density functional theory calculations. We also quantify the degree to which the threefold rotation symmetry is broken and account for the Q = 0 excitations observed in other measurements, yielding a spin exchange model which is consistent across multiple experimental probes. We also identify a strongly reduced static ordered moment and reduced low-energy intensity relative to the linear spin wave calculations, signaling unexplained features in the magnetism which requires going beyond the linear spin wave approximation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1987

Deformation and fatigue behavior of SSME turbopump blade materials

Directionally solidified and single crystal superalloys which are intended for use as turbopump blade materials are anisotropic both elastically and plastically. Therefore, isotropic constitutive models must be modified. Several models which are now being developed are based on metallurgical theories of deformation in these types of alloys. However, these theories have not been fully justified, and the temperature and strain regimes over which they may be valid are poorly defined. The objective of this work is to study the deformation behavior of the alloys, in order to determine the validity of these models and to thereby support the ongoing research efforts in solid mechanics.

Milligan, Walter W.↗
NASA NTRS1988

Micromechanics of cyclic deformation in SSME turbopump blade materials

Current and candidate Space Shuttle Main Engine (SSME) turbopump blade materials are anisotropic, both in their elastic and plastic response. The major objective is to characterize the plastic deformation behavior of a typical single crystal nickel-base superalloy, PWA 1480, and to use this information to help guide the development of anisotropic constitutive models.

Milligan, Walter W.↗
DOE OSTI2025

Direct sensitivity analysis on the parameterization of crystal plasticity models

Various methods for calibrating crystal plasticity finite element (CPFE) models lead to non-unique input parameter values, which subsequently introduce uncertainty in the predicted mechanical response. Sensitivity analysis (SA) conducted on crystal plasticity models is used to identify how variability in these parameters contribute to output uncertainty. Traditional SA on CPFE parameters uses simplified surrogate models to save computational time. However, the accuracy of the surrogate models depends on the quantity of training data used, and any modeling error can propagate into the SA results, potentially affecting their reliability. In this work, the elementary effects test (EET) method, a global SA technique using direct CPFE simulations was employed, and the results obtained were compared with the First Order Second Moment (FOSM) method. ExaConstit, an open-source GPU-enabled CPFE code, was used to perform the simulations and direct SA. The EET method was accurately able to capture the non-linear effects of all the input parameters on the output and is a valuable approach for reliably attributing parameter sensitivities in CPFE models. Based on the results, efficient strategies to perform future parameter calibration and SA are discussed. Additionally, the SA trends observed in different single crystal orientations closely mirrored the activity of the slip systems.

Elementary Effects Test↗
NASA NTRS1979

Anomalous growth of single ice crystals in solution

It is shown that major discrepancies exist between experiments and theory for ice crystal growth from solution. Accurate data, taken in a microgravity environment, approximate analytical models, and exact (probably numerical) models all are needed to advance our understanding of ice crystal growth phenomena. A new approximate semi-empirical theory is presented which predicts that a relatively sharp transition from natural convection control to diffusion control for ice growth in pure water occurs at a subcooling of about 10 C (a reduced temperature difference of about 0.125). No reliable data exist to test this prediction. The theory also predicts qualitatively the growth of ice in NaCl solution in which maxima in the growth rates are observed at various levels of subcooling.

Gill, W. N.↗
NASA NTRS2010

Comparing Aircraft Observations of Snowfall to Forecasts Using Single or Two Moment Bulk Water Microphysics Schemes

High resolution weather forecast models with explicit prediction of hydrometeor type, size distribution, and fall speed may be useful in the development of precipitation retrievals, by providing representative characteristics of frozen hydrometeors. Several single or double-moment microphysics schemes are currently available within the Weather Research and Forecasting (WRF) model, allowing for the prediction of up to three ice species. Each scheme incorporates different assumptions regarding the characteristics of their ice classes, particularly in terms of size distribution, density, and fall speed. In addition to the prediction of hydrometeor content, these schemes must accurately represent the vertical profile of water vapor to account for possible attenuation, along with the size distribution, density, and shape characteristics of ice crystals that are relevant to microwave scattering. An evaluation of a particular scheme requires the availability of field campaign measurements. The Canadian CloudSat/CALIPSO Validation Project (C3VP) obtained measurements of ice crystal shapes, size distributions, fall speeds, and precipitation during several intensive observation periods. In this study, C3VP observations obtained during the 22 January 2007 synoptic-scale snowfall event are compared against WRF model output, based upon forecasts using four single-moment and two double-moment schemes available as of version 3.1. Schemes are compared against aircraft observations by examining differences in size distribution, density, and content. In addition to direct measurements from aircraft probes, simulated precipitation can also be converted to equivalent, remotely sensed characteristics through the use of the NASA Goddard Satellite Data Simulator Unit. Outputs from high resolution forecasts are compared against radar and satellite observations emphasizing differences in assumed crystal shape and size distribution characteristics.

Molthan, Andrew L.↗
NASA NTRS1987

High-resolution heat-transfer-coefficient maps applicable to compound-curve surfaces using liquid crystals in a transient wind tunnel

Tests were performed in a transient heat transfer tunnel in which the model under test was preheated prior to allowing room temperature air to be suddenly drawn over the model. The resulting movement of isothermal contours on the model is revealed using a surface coating of thermochromic liquid crystals that display distinctive colors at particular temperatures. A video record is obtained of a temperature and time data pair for all points on the model during a single test. Experiments on a duct model are reported in which the model was preheated using a hot air stream. A manner in which initial model temperature nonuniformities could be taken into account was investigated. The duct model was also tested with a steady-state measurement technique and results were compared with the transient measurements, but recognizing that differences existed between the upstream thermal boundary conditions. The steady-state and transient measurements were shown to be consistent with predicted values. The main advantage of this transient heat transfer technique using liquid crystals is that since the test model need not be actively heated, high-resolution measurements on surfaces with complex shapes may be obtained.

Jones, T. V.↗
NASA NTRS1988

High-resolution heat-transfer-coefficient maps applicable to compound-curve surfaces using liquid crystals in a transient wind tunnel

Tests were performed in a transient heat transfer tunnel in which the model under test was preheated prior to allowing room temperature air to be suddenly drawn over the model. The resulting movement of isothermal contours on the model is revealed using a surface coating of thermochromic liquid crystals that display distinctive colors at particular temperatures. A video record is obtained of a temperature and time data pair for all points on the model during a single test. Experiments on a duct model are reported in which the model was preheated using a hot air stream. A manner in which initial model temperature nonuniformities could be taken into account was investigated. The duct model was also tested with a steady-state measurement technique and results were compared with the transient measurements, but recognizing that differences existed between the upstream thermal boundary conditions. The steady-state and transient measurements were shown to be consistent with predicted values. The main advantage of this transient heat transfer technique using liquid crystals is that since the test model need not be actively heated, high-resolution measurements on surfaces with complex shapes may be obtained.

Jones, Terry V.↗
DOE OSTI2021

DNA asymmetry promotes SUMO modification of the single-stranded DNA-binding protein RPA

Repair of DNA double-stranded breaks by homologous recombination (HR) is dependent on DNA end resection and on post-translational modification of repair factors. In budding yeast, single-stranded DNA is coated by replication protein A (RPA) following DNA end resection, and DNA–RPA complexes are then SUMO-modified by the E3 ligase Siz2 to promote repair. Here, we show using enzymatic assays that DNA duplexes containing 3' single-stranded DNA overhangs increase the rate of RPA SUMO modification by Siz2. The SAP domain of Siz2 binds DNA duplexes and makes a key contribution to this process as highlighted by models and a crystal structure of Siz2 and by assays performed using protein mutants. Enzymatic assays performed using DNA that can accommodate multiple RPA proteins suggest a model in which the SUMO-RPA signal is amplified by successive rounds of Siz2-dependent SUMO modification of RPA and dissociation of SUMO-RPA at the junction between single- and double-stranded DNA. Our results provide insights on how DNA architecture scaffolds a substrate and E3 ligase to promote SUMO modification in the context of DNA repair.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2002

Fluid Flow and Solidification Under Combined Action of Magnetic Fields and Microgravity

Mathematical models, both 2-D and 3-D, are developed to represent g-jitter induced fluid flows and their effects on solidification under combined action of magnetic fields and microgravity. The numerical model development is based on the finite element solution of governing equations describing the transient g-jitter driven fluid flows, heat transfer and solutal transport during crystal growth with and without an applied magnetic field in space vehicles. To validate the model predictions, a ground-based g-jitter simulator is developed using the oscillating wall temperatures where timely oscillating fluid flows are measured using a laser PIV system. The measurements are compared well with numerical results obtained from the numerical models. Results show that a combined action derived from magnetic damping and microgravity can be an effective means to control the melt flow and solutal transport in space single crystal growth systems.

Li, B. Q.↗
DOE OSTI2022

Analytical methods for superresolution dislocation identification in dark-field X-ray microscopy

In this work, we develop several inference methods to estimate the position of dislocations from images generated using dark-field X-ray microscopy (DFXM)—achieving superresolution accuracy and principled uncertainty quantification. Using the framework of Bayesian inference, we incorporate models of the DFXM contrast mechanism and detector measurement noise, along with initial position estimates, into a statistical model coupling DFXM images with the dislocation position of interest. We motivate several position estimation and uncertainty quantification algorithms based on this model. We then demonstrate the accuracy of our primary estimation algorithm on synthetic realistic DFXM images of edge dislocations in single-crystal aluminum. We conclude with a discussion of our methods’ impact on future dislocation studies and possible future research avenues.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Recent advances in describing and driving crystal nucleation using machine learning and artificial intelligence

With the advent of faster computer processors and especially graphics processing units (GPUs) over the last few decades, the use of data-intensive machine learning (ML) and artificial intelligence (AI) has increased greatly, and the study of crystal nucleation has been one of the beneficiaries. In this study, we outline how ML and AI have been applied to address four outstanding difficulties of crystal nucleation: how to discover better reaction coordinates (RCs) for describing accurately non-classical nucleation situations; the development of more accurate force fields for describing the nucleation of multiple polymorphs or phases for a single system; more robust identification methods for determining crystal phases and structures; and as a method to yield improved course-grained models for studying nucleation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗