Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shock structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

The role of high pressure experiment and theory in our understanding of gaseous and icy planets

High pressure experiments provide essential data for modeling planetary structure. Shock wave experiments are often especially suitable because they sample the same region of pressure-temperature space that is achieved naturally within the planet during its evolution. A very brief overview of planetary properties is given, followed by a summary of the issues of current interest: the behavior of hydrogen and hydrogen-rich mixtures; C, N, and O at high pressure, and rock-ice mixtures.

Stevenson, David J.↗
NASA NTRS1991

Short conical solid/perforated plug-nozzle as supersonic jet noise suppressor

Experimental studies of the acoustic far field, and the nature of the repetitive shock structure in cold jet flows from an externally expanded plug-nozzle having a short conical plug with a pointed termination, operated in a range of supercritical pressure ratios of 2.0 to 4.5, are reported. The overall sound pressure levels of a short solid conical plug-nozzle (CPN) are found to be within 3 dB of those of the baseline noise levels of a minimum length contoured plug-nozzle operated at the same pressure ratio and having the same annular throat area. As compared to an equivalent convergent nozzle, the noise reductions achieved through the use of a short solid CPN are of the order of 5 dB.

Das, I. S.↗
NASA NTRS1991

Contraction ratio effects in a generic sidewall compression scramjet inlet - A computational and experimental investigation

Computed and experimental data on a generic three-dimensional sidewall compression scramjet inlet with a leading edge sweep of 45 degrees at Mach 20 are presented. A three-dimensional Navier-Stokes code was adapted to perform preliminary parametric studies leading to the present configuration. Following the design phase, the code was then employed as an analysis tool to provide a better understanding of the flow field and the experimental static and pitot pressure data. The model possessed 240 static pressure orifices distributed on the forebody plane, sidewalls, and cowl and was tested in the 31 Inch Mach 10 facility at the NASA Langley Research Center. Pitot rakes were employed to map the entrance and exit planes. The contraction ratio was observed to have a dominant effect on the inlet shock structure and performance; these effects are the emphasis of the present report. In addition to pressure measurements, oil flows were used for further visualization and comparison with computation.

Holland, Scott D.↗
NASA NTRS1991

Accuracy of an unstructured-grid upwind-Euler algorithm for the ONERA M6 wing

Improved algorithms for the solution of the three-dimensional, time-dependent Euler equations are presented for aerodynamic analysis involving unstructured dynamic meshes. The improvements have been developed recently to the spatial and temporal discretizations used by unstructured-grid flow solvers. The spatial discretization involves a flux-split approach that is naturally dissipative and captures shock waves sharply with at most one grid point within the shock structure. The temporal discretization involves either an explicit time-integration scheme using a multistage Runge-Kutta procedure or an implicit time-integration scheme using a Gauss-Seidel relaxation procedure, which is computationally efficient for either steady or unsteady flow problems. With the implicit Gauss-Seidel procedure, very large time steps may be used for rapid convergence to steady state, and the step size for unsteady cases may be selected for temporal accuracy rather than for numerical stability. Steady flow results are presented for both the NACA 0012 airfoil and the Office National d'Etudes et de Recherches Aerospatiales M6 wing to demonstrate applications of the new Euler solvers. The paper presents a description of the Euler solvers along with results and comparisons that assess the capability.

Batina, John T.↗
NASA NTRS1991

Statistical properties of shock-accelerated ions in the outer heliosphere

Reported here are statistical studied of interplanetary protons (about 0.5-1.5 MeV) as measured by the Voyager 2 spacecraft in the outer heliosphere between about 1 and 22 AU. The acceleration processes which produce the fluctuations in intensity of the protons throughout the interval studied are caused by solar flare-generated shock waves and corotating shock structures in the solar wind. It is found that the proton count rates can be represented by a lognormal distribution, independent of the phase of the solar cycle in which the measurements were made. Power spectra of the logarithm of the counts show that for frequencies in the range of about 0.02-0.5 cycles per day, the spectra can be characterized as about f exp -2. At lower frequencies, the spectra turn over and flatten. Over the entire frequency range studied, about 0.002-0.5 cycles per day, the spectra are therefore nonfractal. The rollover in the spectra at about 100 days probably represents the reorganization time for solar wind streams within the coronal source at the sun.

Lanzeroti, L. J.↗
NASA NTRS1991

Viscous three-dimensional calculations of transonic fan performance

A 3-D flow analysis code was used to compute the design speed operating line of a transonic fan rotor, and the results were compared with experimental data. The code is an explicit finite difference code with an algebraic turbulence model. The transonic fan, called rotor 67, was tested experimentally at NASA-Lewis with conventional aerodynamic probes and with user anemometry and was included as one of the AGARD test cases for the computation of internal flows. The experimental data are described. Maps of total pressure ratio and adiabatic efficiency versus mass flow were computed and are compared with the experimental maps, with good agreement. Detailed comparisons between calculations and experiment are made at two operating points, one near peak efficiency and the other near stall. Blade-to-blade contour plots are used to show the shock structure. Comparisons of circumferentially integrated flow quantities downstream of the rotor show spanwise distributions of several aerodynamic parameters. Calculated Mach number distributions are compared with laser anemometer data within the blade row and the wake to quantify the accuracy of the calculations. Particle traces are used to show the nature of secondary flow.

Chima, Rodrick V.↗
NASA NTRS1991

Three-dimensional calculations of supersonic reacting flows using an LU scheme

A 3-D numerical program that incorporates comprehensive real gas property models was developed to simulate supersonic reacting flows. The code employs an implicit, finite volume, Lower-Upper (LU), time-marching method to solve the complete Navier-Stokes and species equations in a fully-coupled and efficient manner. A chemistry model with 9 species and 18 reaction steps is adopted in the program to represent the chemical reactions of H2 and air. To demonstrate the capability of the program, flow fields of underexpanded hydrogen jets transversely injected into the supersonic airstream inside the combustors of scramjets are calculated. Results clearly depict the flow characteristics, including the shock structure, the separated flow regions around the injector, and the distribution of the combustion products.

Yu, Sheng-Tao↗
NASA NTRS1992

Viscous three-dimensional calculations of transonic fan performance

A 3-D flow analysis code was used to compute the design speed operating line of a transonic fan rotor, and the results were compared with experimental data. The code is an explicit finite difference code with an algebraic turbulence model. The transonic fan, called Rotor 67, was tested experimentally at NASA Lewis conventional aerodynamic probes and with user anemometry and was included as one of the AGARD test cases for the computation of internal flows. The experimental data are described. Maps of total pressure ratio and adiabatic efficiency vs mass flow were computed and are compared with the experimental maps, with good agreement. Detailed comparisons between calculations and experiment are made at two operating points, one near peak efficiency and the other near stall. Blade-to-blade contour plots are used to show the shock structure. Comparisons of circumferentially integrated flow quantities downstream of the rotor show spanwise distributions of several aerodynamic parameters. Calculated Mach number distributions are compared with laser anemometer data within the blade row and the wake to quantify the accuracy of the calculations. Particle traces are used to show the nature of secondary flow.

Chima, Rodrick V.↗
NASA NTRS1992

CFD lends the government a hand

The present survey of important and novel CFD applications being developed and implemented by U.S. Government contractors gives attention to naval vessel flow-modeling, Army ballistic and rotary wing aerodynamics, and NASA hypersonic vehicle related applications of CFD. CFD-generated knowledge of numerical algorithms, fluid motion, and supercomputer use is being incorporated into such additional areas as computational electromagnetics and acoustics. Attention is presently given to CFD methods' development status in such fields as submarine boundary layers, hypersonic kinetic energy projectile shock structures, helicopter main rotor tip flows, and National Aerospace Plane aerothermodynamics.

Lekoudis, Spiro↗
NASA NTRS1992

Leading edge sweep effects in generic three-dimensional sidewall compression scramjet inlets

A computational and experimental study of generic 3D sidewall compression inlets is conducted to examine the effects of fore and aft leading edge sweep on the internal shock structure. Inlets with leading edge sweeps of +30 deg and -30 deg with sidewall compression angles of 6 deg were tested in the NASA Langley Mach 4 air tunnel at a geometric contraction ratio of 1.87. The principal difference in performance was determined to be in the mass capture. Spillage was identified as having two components: a pressure induced component and a sweep induced component. It was found that while the direction of the leading edge sweep had a large influence on the spillage, the pressure effects were more important.

Cozart, Aaron B.↗
NASA NTRS1992

Internal shock interactions in propulsion/airframe integrated three-dimensional sidewall compression scramjet inlets

The advantages and design requirements of propulsion/airframe integration for high Mach number flight are studied in terms of the 3D sidewall compression scramjet inlet. The present work addresses in a parametric fashion the inviscid effects of leading edge sweep, sidewall compression, and inflow Mach number on the internal shock structure in terms of inlet compression and mass capture. The source of the Mach number invariance with leading edge sweep for a constant sidewall compression class of inlet is identified, and a previously undocumented spillage phenomenon in a constant effective wedge angle class of inlets is discussed.

Holland, Scott D.↗
NASA NTRS1992

Three-dimensional calculations of supersonic reacting flows using an LU scheme

An implicit finite volume lower-upper time-marching method which efficiently solves the complete Navier-Stokes and specied equations in a fully coupled fashion is the basis of the present 3D numerical program for simulating the supersonic reacting flows of H2 in air. The chemistry model incorporated has nine species and 18 reaction steps. Calculations are presented for flowfields of underexpanded hydrogen jets that are transversely injected into the supersonic airstream within scramjet combustors; the shock structure, separated flow regions around the injector, and combustion-product distributions are clearly represented.

Yu, Sheng-Tao↗
NASA NTRS1992

Recent results from the University of Washington's 38 mm ram accelerator

The ram accelerator is a propulsive device that accelerates projectiles using gasdynamic cycles similar to those which generate thrust in airbreathing ramjets. The projectile, analogous to the centerbody of a ramjet, travels supersonically through a stationary tube containing a gaseous fuel and oxidizer mixture. The projectile itself carries no onboard propellant. A combustion zone follows the projectile and stabilizes the shock structure. The resulting pressure distribution continuously accelerates the projectile. Several modes of ram accelerator operation have been investigated experimentally and theoretically. At velocities below the Chapman-Jouguet (C-J) detonation speed of the propellant mixture, the thermally choked propulsion mode accelerates the projectiles. At projectile velocities between approximately 90 and 110 percent of the C-J speed, a transdetonative propulsion mode occurs. At velocities beyond 110 percent of the C-J speed, projectiles experience superdetonative propulsion. This paper presents recent experimental results from these propulsion modes obtained with the University of Washington's 38-mm bore ram accelerator. Data from investigations with hydrogen diluted-gas mixtures are also introduced.

De Turenne, J. A.↗
NASA NTRS1992

Reynolds number and cowl position effects for a generic sidewall compression scramjet inlet at Mach 10 - A computational and experimental investigation

Reynolds number and cowl position effects on the internal shock structure and the resulting performance of a generic three-dimensional sidewall compression scramjet inlet with a leading edge sweep of 45 degrees at Mach 10 have been examined both computationally and experimentally. Prior to the experiment, a three-dimensional Navier-Stokes code was adapted to perform preliminary parametric studies leading to the design of the present configuration. Following this design phase, the code was then utilized as an analysis tool to provide a better understanding of the flow field and the experimental static pressure data for the final experimental configuration. The wind tunnel model possessed 240 static pressure orifices distributed on the forebody plane, sidewalls, and cowl and was tested in the NASA Langley 31 Inch Mach 10 Tunnel.

Holland, Scott D.↗
NASA NTRS1992

Numerical Modeling of a Vortex Stabilized Arcjet

Arcjet thrusters are being actively considered for use in Earth orbit maneuvering applications. Experimental studies are currently the chief means of determining an optimal thruster configuration. Earlier numerical studies have failed to include all of the effects found in typical arcjets including complex geometries, viscosity, and swirling flow. Arcjet geometries are large area ratio converging nozzles with centerbodies in the subsonic portion of the nozzle. The nozzle walls serve as the anode while the centerbody functions as the cathode. Viscous effects are important because the Reynolds number, based on the throat radius, is typically less than 1,000. Experimental studies have shown that a swirl or circumferential velocity component stabilizes a constricted arc. This dissertation describes the equations governing flow through a constricted arcjet thruster. An assumption that the flowfield is in local thermodynamic equilibrium leads to a single fluid plasma temperature model. An order of magnitude analysis reveals the governing fluid mechanics equations are uncoupled from the electromagnetic field equations. A numerical method is developed to solve the governing fluid mechanics equations, the Thin Layer Navier-Stokes equations. A coordinate transformation is employed in deriving the governing equations to simplify the application of boundary conditions in complex geometries. An axisymmetric formulation is employed to include the swirl velocity component as well as the axial and radial velocity components. The numerical method is an implicit finite-volume technique and allows for large time steps to reach a converged steady-state solution. The inviscid fluxes are flux-split, and Gauss-Seidel line relaxation is used to accelerate convergence. Converging-diverging nozzles with exit-to-throat area ratios up to 100:1 and annular nozzles were examined. Quantities examined included Mach number and static wall pressure distributions, and oblique shock structures. As the level of swirl and viscosity in the flowfield increased the mass flow rate and thrust decreased. The technique was used to predict the flow through a typical arcjet thruster geometry. Results indicate swirl and viscosity play an important role in the complex geometry of an arcjet.

Pawlas, Gary E.↗
NASA NTRS1991

OPAD 1991

The Optical Plume Anomaly Detection Program, an experimental study in the attempt to create a rocket engine health monitor based on detection and possible quantification of anomalous atomic and molecular species in the exhaust plume, has been in existence for several years. The instruments developed to monitor the exhaust plumes are presented. Two optical instruments are employed: the polychromator and the spectrometer. The polychromator is a 16 channel spectroradiometer having independent channels individually adjustable for center wavelength and pass bandwidth. Those values may be mechanically reset, with the aid of certain lab equipment. The spectrometer is a multichannel spectral analyzer having two 2048 element linear photodiode arrays at the exit plane of the dispersing instrument, which, like the 16 channel device, is a 1/2 meter grating spectrograph. These instruments are equipped with ultraviolet grade multifiber optical input cables, allowing the instruments to be placed in a benign environment. Telescopes mounted on the test stand observe the plume keeping the shock structure in view. The data acquisition and control system consist of four 80386-33 MHz computers: two at the test stand for instrument control and data preconditioning, and two in the test support building providing data archiving, display, and system control. Further descriptions of the instrumentation are provided.

Powers, W. T.↗
NASA NTRS1993

Enhanced mixing of a rectangular supersonic jet by natural and induced screech

The influence of shear layer excitation on the mixing of supersonic rectangular jets was studied experimentally. Two methods of excitation were used to control the jet mixing. The first used the natural screech of an underexpanded supersonic jet from a converging nozzle. The level of the screech excitation was controlled by the use of a pair of baffles located to block the acoustic feedback path between the downstream shock structure and the nozzle lip. A screech level variation of over 30 decibels was achieved and the mixing was completely determined by the level of screech attained at the nozzle lip. The second form of self-excitation used the induced screech caused by obstacles or paddles located in the shear layers on either long side of the rectangular jet. With sufficient immersion of the paddles intense jet mixing occurred and large flapping wave motion was observed using a strobed focused Schlieren system. Each paddle was instrumented with a total pressure tap and strain gages to determine the pressure and drag force on the square cross-section paddle. Considerable drag was observed in this initial exploratory study. Future studies using alternate paddle geometries will be conducted to maximize jet mixing with minimum drag.

Rice, Edward J.↗
NASA NTRS1992

Application of multigrid and adaptive grid embedding to the two-dimensional flux-split Euler equations

A numerical algorithm is presented for solving the two-dimensional flux-split Euler equations using a multigrid method with adaptive grid embedding. The method uses an unstructured data set along with a system of pointers for communication on the irregularly shaped grid topologies. An explicit two-stage time-advancement scheme is implemented. A multigrid algorithm is used to provide grid level communication and to accelerate the convergence of the solution to steady state. Results are presented for a NACA 0012 aerofoil in a free stream with a Mach number of 0.85 and an angle of attack of 1.0 degree. Excellent resolution of the shock structures is obtained with the adaptive grid embedding method with significantly fewer grid points than the comparable structured grid.

Warren, Gary P.↗