Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Selective capture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Plasticity of Behavioral and Growth Responses to Two Feeding Regimes and Implications for the Domestication of Steelhead Trout

Abstract The effects of domestication selection on fitness are of serious concern in hatchery-reared anadromous salmonids, which often experience selection for rapid growth and associated deviations from natural agonistic and feeding behaviors. The high rations that are used to raise age-1 smolts and the reduced rations that are used to produce age-2 smolts potentially result in very different behavioral tactics and social dynamics of competition in hatchery tanks. Consequently, steelhead Oncorhynchus mykiss hatchery programs with recovery or conservation goals may need to change their aquaculture practices to minimize domestication selection. This study investigated how the feeding rate (proportion of presented food items that were successfully captured) and relative competitive ability (ability to monopolize food items in small groups) of age-1 and age-2 steelhead corresponded to feeding location (surface or bottom) and growth rate in hatchery rearing tanks. We raised steelhead from a common broodstock to smolt at age 1 or age 2 by manipulating their rations (age-1 fish received the high ration, age-2 the low ration). The fish in the age-1 treatment had a lower feeding rate than did those in the age-2 treatment. Feeding rate was positively correlated with both body size and with growth rate in the rearing tanks at both rations. The age-2 steelhead were more likely to be detected at a single feeding location than were the age-1 fish, which were more frequently detected at both locations. The more competitive age-1 fish were more frequently detected at both feeding locations, and the less competitive fish were detected at only one location. Relative competitive ability was not associated with feeding location in the age-2 treatment, nor was it associated with growth rate in either treatment. Age-2 steelhead that were detected only at the bottom or at both feeding locations had higher growth rates than those that were detected only at the surface, suggesting greater scramble competition near the point of food delivery under the restricted ration. Feeding location was not associated with growth rate in the age-1 treatment. The results indicate that ration directly affects feeding rate and that ration and relative competitive ability interact to influence feeding rate. Because feeding rate was positively associated with growth rate at both ration levels in the hatchery tanks, behaviors that are associated with feeding motivation may be an important trait under selection in salmonid hatcheries.

Tatara, Christopher P.↗
DOE OSTI2025

Performance Degradation of Amine-Infused Fiber Sorbents for Direct Air Capture: Mechanisms and Solutions

Sorbent stability poses significant impacts on longterm performance of direct air capture (DAC) of CO 2 and levelized cost of capture (LCOC). We report the DAC performance degradation of amine-infused fiber sorbents based on poly(ethylenimine) (PEI), mesoporous SiO 2 , and cellulose acetate (CA) over CO 2 cyclic sorption cycles in a nonoxidative environment. Infrared and nuclear magnetic resonance spectra indicate that the aminolysis reactions between CA ester moieties and PEI amine sites lead to the formation of acetamides and hence lower CO 2 affinities of the sorbents. This stability issue can be remedied by hydrolysis treatment of the CA fiber sorbents before PEI impregnation or replacing CA with poly(ether sulfone). This study underscores the importance of selecting proper support or additive materials of DAC contactors that are compatible with active species of CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Center for Gas Separations (CGS)

The total energy consumption in the U.S. has been rising steadily for decades, and it currently amounts to ~98,000 TBtu/yr, with approximately 30% of this total attributable to the industrial sector. Reasonable estimates indicate that 45–55% of total industry energy consumption derives from chemical separations, and for example, over 120 TBtu/yr alone is used in carrying out olefin/paraffin separations via energy-intensive cryogenic distillation. Therefore, the pursuit of new, even radically different approaches to some of the most energy-intensive industrial separations processes is an imperative scientific pursuit for reducing energy consumption toward a more sustainable future. Adsorbent and membrane-based separations can require a fraction of the energy needed for distillation methods, and as such are considered promising solutions for balancing increasing energy demand in the U.S. with the need for a massive reduction in energy consumption. Although considerable research effort has been devoted to the design of materials capable of carrying out various gas separations, usually operating through size-selective, chemisorptive, or physisorptive mechanisms, it remains a great challenge to design materials that function adequately for real-world applications. Indeed, the chemical and physical differences between molecules in gas mixtures of interest are often small, and therefore it is necessary, through the use of nanoscience and synthetic chemistry, to engineer unprecedented molecular-level control in adsorbate–adsorbent interactions. The overarching mission of the Center for Gas Separations (CGS) was to discover fundamental innovations that have the potential to dramatically reduce the energy associated with critical gas separations. In particular, the CGS developed novel synthetic routes, guided by molecular chemistry principles, as well as advanced characterization and computational methods, that have enabled the discovery of new materials and membranes tailor-made to exhibit exceptional performance for a range of gas separations processes, as required in the clean use of fossil fuels and in reducing CO 2 emissions from industry. A challenge of this magnitude required the collaboration and synergy of a large team of researchers with expertise in materials synthesis, characterization, and computations. During the 11-year project period, the CGS created a range of new materials within the family of highly-tunable, porous solids known as metal–organic frameworks (MOFs). These new frameworks demonstrate novel mechanisms for key industrial gas separations, including revolutionary new cooperative adsorption processes that enable low-energy CO 2 and CO capture, and are capable of efficiently separating olefins from paraffins, O 2 from air, and the shape-selective separation of alkane isomers. In addition, the CGS developed new strategies for incorporating these materials into composite membranes toward highly efficient and selective membrane-based separations. As a testament to the success of the CGS, two start-up companies, Mosaic Materials,4 Inc. and Flux Technology, Inc., grew out of these research efforts, and these companies are seeking to commercialize MOF and composite membranes materials for key separations in industry, including large-scale CO 2 capture and hydrocarbon separations, respectively. Another company, framergy, Inc., licensed IP resulting from CGS research toward the commercialization of adsorbents for various energy-relevant applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Direct reactions for astrophysical p-capture rates with ORRUBA and GODDESS

Understanding the nucleosynthesis and energy generation in quiescent and explosive stellar burning requires a detailed understanding of reaction rates on many unstable nuclides. Such reaction rates are often governed by the properties of low-lying, isolated proton resonances. Though direct measurements of resonance strengths are ultimately desired, and are a focus of rare isotope beam facilities worldwide, such tour-de-force experiments must be guided by indirect techniques, in order to know resonance energies, J π assignments, and estimated widths, to inform targeted measurements. Furthermore, some important low-lying resonances may be too weak for direct measurements with radioactive beams, and indirect techniques provide the only practical constraints. Additionally, there has been growing interest in the astrophysical role of isomeric states, which can influence the reaction flow in nucleosynthetic reaction networks, and hence impact the quantitative interpretation of astronomical observables, such as γ-ray signatures, and elemental and isotopic ratios. Properties of single-proton resonances can be obtained by exploiting the selectivity of direct reactions, such as single-nucleon transfer and charge-exchange reactions. Constraining proton-capture rates via direct reactions has been a focus of the astrophysics program at ORNL for over two decades, spurring the development of the ORRUBA and GODDESS detector systems. Herein, a review of recent developments in instrumentation and radioactive beam delivery (including isomeric beam experiments) is presented, along with some specific examples of astrophysically interesting sd-shell nuclides, which have been a target of recent ORRUBA and GODDESS experiments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

An Intensified Electro-Catalytic Process for Production of Formic Acid from Power Plant CO 2 Emissions (Final Technical Report)

The goal of this project was to develop and test a novel electro-catalytic method for the production of high-value formic acid from coal-derived CO 2 as a strategy to offset the cost of CO 2 capture. Formic acid is currently produced from the conversion of higher-order carbon products such as methane and/or methanol. This electro-catalytic CO 2 reduction process utilizes a highly selective catalyst in a flow-through reactor design to maximize the formic acid production rate. The specific objectives of this proposed study were to; 1) produce and screen highly selective engineered CO 2 reducing catalysts capable of exclusively producing formic acid; 2) immobilize the catalyst within a flow process to continually produce formic acid and increase catalyst lifetime; and 3) assess the stability of the electrocatalyst during long-term operation. The project involved the development and testing of an engineered catalyst to selectively reduce CO 2 directly and exclusively to formic acid. After the best-performing catalyst was selected, it was immobilized and tested inside a flow-through reactor at UK CAER using realistic conditions expected from CO 2 produced during coal combustion and separated by a CO 2 capture plant.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Electrolyte–Electrocatalyst Interfacial Effects of Polymeric Materials for Tandem CO 2 Capture and Conversion Elucidated Using In Situ Electrochemical AFM

Integrating CO 2 capture and electrochemical conversion has been proposed as a strategy to reduce the net energy required for CO 2 regeneration in traditional CO 2 capture and conversion schemes and can be coupled with carbon-free renewable electricity. Polyethylenimine (PEI)-based materials have been previously studied as CO 2 capture materials and can be integrated in these reactive capture processes. PEI-based electrolytes have been found to significantly increase the CO 2 loading, and impact selectivity and rate of product formation when compared to the conventional aqueous electrolytes. However, the influence of these materials at the catalyst–electrode interface is currently not well understood. In this study, PEI-based electrolytes were prepared and their impact on the morphology of a silver electrode performing electrochemical CO 2 reduction (CO 2 R) was studied using in situ electrochemical atomic force microscopy (EC-AFM). The presence of PEI on the electrode surface could be distinguished based on nanomechanical properties (DMT modulus), and changes were observed as negative polarization was applied, revealing a reorganization of the PEI chains due to electrostatic interactions. These changes were impacted by the electrolyte composition, including the addition of supporting electrolyte KHCO 3 salt, as well as CO 2 captured by the PEI-based electrolyte, which minimized the change in surface mechanical properties and degree of PEI alignment on the electrode surface. The changes in surface mechanical properties were also dependent on the PEI polymer length, with higher molecular weight PEI showing different reconfiguration than the shorter polymer brushes. The study highlights that the choice of polymer material, the electrolyte composition, and CO 2 captured impact the nearelectrode environment, which has implications for CO 2 R, and presents EC-AFM as a new tool that can be used to probe the dynamic behavior of these interfaces during electrocatalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dual-Bed Radioiodine Capture from Complex Gas Streams with Zeolites: Regeneration and Reuse of Primary Sorbent Beds for Sustainable Waste Management

Dual-sorbent systems are proposed for radioiodine management with a regenerated primary bed for multiple cycles of use in complex conditions and a secondary bed for disposal with higher waste loadings. Sorbent approaches for the effective capture of gaseous radioiodine (isotopes 129 I and 131 I) produced from a range of nuclear processes have been studied for over half a century. (1−5) Whether or not a sorbent (e.g., molecular sieve) is required to physically screen/trap or chemically bind a radionuclide of interest through chemisorption, the complexity of the gas stream has a large impact on the performance (e.g., loading capacity, selectivity) and active life of a sorbent bed. (3) Silver mordenite (AgZ), the U.S. Department of Energy baseline sorbent for radioiodine capture from nuclear processes, performs well within acidic conditions and at elevated temperatures (6) and can be consolidated into a chemically durable waste form for long-term disposal. (7,8) However, new sorbents are being sought because optimal capture performance of AgZ significantly decreases in dynamic oxidizing environments with competing species, and it is expensive and it contains Ag (a toxic metal). (9) Until a new sorbent is found to replace AgZ, the regeneration and reuse of AgZ is an attractive alternative to a single-use primary sorbent bed. In this regard, a primary sorbent could be designed for enhanced capture in complex gas streams and the ability to be regenerated for reuse. Here, a secondary sorbent could then be tailored for maximum iodine loading in the gas stream and chemical durability within a disposal facility.

chemisorption↗
DOE OSTI2025

Transformational Nano-confined Ionic Liquid Membrane for Greater than or Equal to 97 Percent Carbon Dioxide Capture from Natural Gas Combined Cycle Flue Gas

A transformational process based on nano-confined ionic liquid (NCIL) membranes was developed for capturing ≥97% CO 2 from natural gas combined cycle (NCCC) flue gas. The NCIL membranes were prepared by loading amino acid ionic liquid into a framework composed of single-walled carbon nanotube mesh filled with graphene oxide quantum dots. The membranes exhibited CO 2 permeance as high as 2,000 GPU with a CO 2 /N2 selectivity of 2,300 for a typical NGCC flue gas composition. When H 2 O vapor sweep was applied in the permeate side, 96.6% CO2 dry-basis purity and 97.6% CO 2 capture rate were achieved for a simulated NGCC flue gas with single stage. In the process design, a highly H 2 O-selective membrane would be needed to recover majority of the H 2 O vapor, and the recovered H 2 O vapor could be recycled to the permeate side of the NCIL membrane. Sulfonated poly(ether ether ketone) membranes were successfully developed for this purpose. These membranes exhibited H 2 O permeance great than 11,000 GPU and H 2 O/CO 2 selectivity greater than 1,000 at 70ºC for a feed mixture consisting of 14.5 vol% H2O and balanced CO 2 . A standalone membrane model using MATLAB platform was developed for process simulation. The model was validated with experimental data. Techno-economic analysis based on the testing data collected during the current program suggests this transformational membrane process can achieve 97% CO 2 capture efficiency with a cost of $47.8/tonne of CO 2 , which is a 21% reduction versus DOE’s reference case B31B.97.

03 NATURAL GAS↗
DOE OSTI2023

Model selection and signal extraction using Gaussian Process regression

We present a novel computational approach for extracting localized signals from smooth background distributions. We focus on datasets that can be naturally presented as binned integer counts, demonstrating our procedure on the CERN open dataset with the Higgs boson signature, from the ATLAS collaboration at the Large Hadron Collider. Our approach is based on Gaussian Process (GP) regression — a powerful and flexible machine learning technique which has allowed us to model the background without specifying its functional form explicitly and separately measure the background and signal contributions in a robust and reproducible manner. Unlike functional fits, our GP-regression-based approach does not need to be constantly updated as more data becomes available. We discuss how to select the GP kernel type, considering trade-offs between kernel complexity and its ability to capture the features of the background distribution. We show that our GP framework can be used to detect the Higgs boson resonance in the data with more statistical significance than a polynomial fit specifically tailored to the dataset. Finally, we use Markov Chain Monte Carlo (MCMC) sampling to confirm the statistical significance of the extracted Higgs signature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Design of enhanced porous organic cage solubility in Type 2 porous liquids

Decreasing cost of technologies for direct air capture of carbon can be achieved through the design of new materials with high CO 2 selectivity that can be incorporated into existing industrial processes. An emerging class of materials for these applications are porous liquids (PLs). PLs are mixtures of porous hosts and solvents with intrinsic porosity due to steric exclusion of solvent from inside the porous host. It is currently unknown how solvent -porous host interactions affect porous host solubility in the bulk solvent. Here, in this study, density functional theory simulations were used to investigate interactions between nine solvents and a CC13 porous organic cage (POC). Calculations identified that solvent molecules were the most stable when placed either inside the CC13 POC or in the pore window compared to interfacial binding sites. Structural changes to the CC13 POC correlated with reported experimental solubilities, including expansion of the CC13 POC with solvent molecule infiltration and expansion or contraction of the pore window. Based on these results, new PL design guidelines should include compositions with (1) high concentrations of POCs with flexible cage structures that can expand when solvated and (2) solvent molecule-POC combinations that contract the pore window during solvent molecule-host binding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synthesis and Characterization of Macrocyclic Ionic Liquids for CO 2 Separation

In this work, a series of ionic liquids with symmetric, macrocyclic cations composed of N-heterocycles connected by alkyl or ether linkages coupled with bis(trifluoromethylsulfonyl)imide or bis(pentafluoroethanesulfonyl)amide anions were synthesized to explore their application in CO 2 separation. These novel ionic liquids showed selective physical absorption of CO 2 compared to N 2 making them potential candidates for carbon capture. We examined the effect of cation structure on the physicochemical and separations properties of the ionic liquid and showed that these ionic liquids exhibit an inverse relationship between molar volume and CO 2 sorption capacity following the trend predicted by models based on regular solution theory. The fractional free volumes of the ionic liquids were lower than typical alkyl-imidazolium ionic liquids despite the cyclic structure of the cations which could be related to the flexibility of the alkyl and ether linkages. These results provide added insight into our understanding of structure–property relationships in CO 2 solubility in ionic liquids and afford a path toward enhancing the separations properties based on structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Infrared spectroscopy data- and physics-driven machine learning for characterizing surface microstructure of complex materials

There is a need to characterize complex materials and their dynamics under reaction conditions to accelerate materials design. Adsorbate vibrational excitations are selective to adsorbate/surface interactions and infrared (IR) spectra associated with activating adsorbate vibrational modes are accurate, capture details of most modes, and can be obtained operando. Current interpretation depends on heuristic peak assignments for simple spectra, precluding the possibility of obtaining detailed structural information. Here, we combine data-based approaches with chemistry-dependent problem formulation to develop physics-driven surrogate models that generate synthetic IR spectra from first-principles calculations. Using synthetic IR spectra of carbon monoxide on platinum, we implement multinomial regression via neural network ensembles to learn probability distributions functions (pdfs) that describe adsorption sites and quantify uncertainty. We use these pdfs to infer detailed surface microstructure from experimental spectra and extend this methodology to other systems as a first step towards characterizing complex interfaces and closing the materials gap.

Science & Technology - Other Topics↗
DOE OSTI2025

Ba 1−x Sr x FeO 3−δ as an improved oxygen storage material for chemical looping air separation: a computational and experimental study

Chemical looping air separation (CLAS) is a promising technology to generate oxygen-rich gas streams to enable efficient carbon dioxide capture during fossil fuel combustion or gasification. CLAS relies on the capture and release of oxygen from the atmosphere using the redox properties of an oxygen-selective solid oxide carrier. This study investigates the redox characteristics of Ba 1−x Sr x FeO 3−δ (0.0 ≤ x ≤ 0.417, 0.0 ≤ δ ≤ 0.5) using a combination of density functional theory (DFT) calculations and experimental verification using X-ray diffraction, thermogravimetric analysis, and oxygen-temperature-programmed desorption. The DFT computed energies of the Ba 1−x Sr x FeO 3−δ perovskites reveal a composition-dependent transition from hexagonal to cubic phases as the Sr-concentration or oxygen vacancy concentration increases. Oxygen vacancy formation energies of the cubic perovskites are found to be lower than those of their hexagonal counterparts. A low oxygen diffusion barrier of ∼1 eV combined with the thermodynamic preference of Ba 1−x Sr x FeO 3−δ compositions that form in a cubic phase suggests them as promising candidates for oxygen storage applications. The experimental results corroborate this finding by identifying Ba 0.75 Sr 0.25 FeO 3−δ in the cubic phase as an optimal composition offering low-temperature oxygen storage capacities comparable to that of the state-of-the-art Sr 0.75 Ca 0.25 FeO 3−δ perovskite oxygen storage material at 325 °C and 350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A scalable metal-organic framework as a durable physisorbent for carbon dioxide capture

A hydrophobic CO 2 physisorbent Most materials for carbon dioxide (CO 2 ) capture of fossil fuel combustion, such as amines, rely on strong chemisorption interactions that are highly selective but can incur a large energy penalty to release CO 2 . Lin et al . show that a zinc-based metal organic framework material can physisorb CO 2 and incurs a lower regeneration penalty. Its binding site at the center of the pores precludes the formation of hydrogen-bonding networks between water molecules. This durable material can preferentially adsorb CO2 at 40% relative humidity and maintains its performance under flue gas conditions of 150°C. —PDS

Science & Technology - Other Topics↗
DOE OSTI2020

Negative Charge Confined Amine Carriers within the Nanowire Network for Stable and Efficient Membrane Carbon Capture

Membrane-based carbon dioxide (CO 2 ) capture has attracted great research interest owing to its potential for higher separation efficiency and lower energy consumption. However, it is still a challenging task to capture CO 2 with membrane from flue gas, especially under moderate-temperature and high-humidity conditions. Here, a stable CO 2 -selective membrane that can operate at temperatures up to 90 °C and under high humidity is reported. The positively charged amine carriers for CO 2 are confined within the negatively charged polymer modified carbon nanotube (CNT) network. In this structure, interconnected CNTs act as the framework for the selective layer and provide numerous nanochannels for gas transport. The negatively charged polymer ensures the carrier stability and further regulates the size of nanochannels in the CNT network. By virtue of carrier-facilitated transport, high CO 2 permeance (up to 3300 gas permeation units) and high CO 2 /N 2 selectivity (400) are achieved under simulated flue gas conditions. Moreover, theoretical calculations verify that the stable separation performance is due to the strong electrostatic interaction between the amine carriers and polymer matrix. The high performance and good stability indicate the great potential of this novel membrane structure for practical application in CO 2 capture.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Development of Crown Ether-Functionalized Polymeric Sorbents for Lithium-Ion Capture

The purpose of this Cooperative Research and Development Agreement (CRADA) was to develop and demonstrate new synthetic strategies for fabricating lithium-selective polymeric adsorbents by covalently incorporating crown ether functionalities into durable, processable support materials. These advanced sorbents are designed to selectively extract lithium ions (Li⁺) from dilute aqueous sources such as brine, seawater, industrial wastewater, and battery recycling streams.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Design and characterization of hierarchical aluminosilicate composite materials for Cs entrapment: Adsorption efficiency tied to microstructure

The growing quantity of nuclear waste and the serious threats to the environment challenge researchers to innovate and target new waste form technologies. In the past decades, considerable efforts have been devoted to developing highly selective sorbents followed by safe disposal with the assurance of chemical stability and robust retention performance. Zeolite-containing geopolymers are regarded as a possible 2-in-1 material able to both capture and sequester elements such as Cs in bed fixed column application perspective. Here, these composites show promise for combining extraction properties of zeolite powder due to its crystalline structure (high capacity and selective adsorption), with the tunable microstructure and the shaping feasibility of the geopolymer binder. For the development of materials devoted to Cs immobilization, porous zeolite/geopolymer composites were prepared by dispersing NaY zeolite particles in a geopolymer binder. The influence of the structural properties of such composites on their ability to entrap a large amount of Cs by an ionic exchange process was notably studied. Composites' compositions, porosities, morphologies and crystallinity were analyzed by scanning electron microscopy coupled with energy dispersive x-ray spectroscopy (SEM-EDX), x-ray diffraction analysis (XRD) and nitrogen adsorption/desorption studies. Experimental Cs sorption in batch mode was used to follow the ionic exchange phenomenon in these materials. Along with 5 wt% amount of zeolite in geopolymer improves the Cs adsorption performance offering multiple new adsorption sites. Additionally, the geopolymer mesopores are beneficial facilitating the access of Cs and its role as a binder is advantageous to tailor granular hierarchical structure for safer industrial application.

36 MATERIALS SCIENCE↗