Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SWiFT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

X-ray diffraction at the National Ignition Facility

We report details of an experimental platform implemented at the National Ignition Facility to obtain in situ powder diffraction data from solids dynamically compressed to extreme pressures. Thin samples are sandwiched between tamper layers and ramp compressed using a gradual increase in the drive-laser irradiance. Pressure history in the sample is determined using high-precision velocimetry measurements. Up to two independently timed pulses of x rays are produced at or near the time of peak pressure by laser illumination of thin metal foils. The quasi-monochromatic x-ray pulses have a mean wavelength selectable between 0.6 Å and 1.9 Å depending on the foil material. The diffracted signal is recorded on image plates with a typical 2 θ x-ray scattering angle uncertainty of about 0.2° and resolution of about 1°. Analytic expressions are reported for systematic corrections to 2 θ due to finite pinhole size and sample offset. A new variant of a nonlinear background subtraction algorithm is described, which has been used to observe diffraction lines at signal-to-background ratios as low as a few percent. Variations in system response over the detector area are compensated in order to obtain accurate line intensities; this system response calculation includes a new analytic approximation for image-plate sensitivity as a function of photon energy and incident angle. This experimental platform has been used up to 2 TPa (20 Mbar) to determine the crystal structure, measure the density, and evaluate the strain-induced texturing of a variety of compressed samples spanning periods 2–7 on the periodic table.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Optimization of the Reax force field for the lithium–oxygen system using a high fidelity charge model

Studies using molecular dynamics (MD) have long struggled to simulate the failure modes of materials, predicting unrealistically high ductility and failing to capture brittle fracture. The primary cause of this shortcoming is an inadequate description of bond breaking. While reactive force fields such as ReaxFF show improvements compared to traditional force fields, the charge models used yield unphysical partial charges, especially during dissociation of ionic bonds. This flaw may be remedied by using the atom-condensed Kohn–Sham density functional theory (DFT) approximated to a second order (ACKS2) charge model for determining partial charges. In this work, we present a new ACKS2-enabled Reax force field for fracture simulations of lithium oxide systems, which was obtained by training against an extensive set of DFT, multireference configuration interaction (MRCI), and MRCI+Q reference data using genetic optimization techniques. This new force field significantly improves the bond breaking behavior, but still cannot fully capture the brittle fracture in MD simulations, suggesting more research is needed to improve simulation of brittle fracture.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nonideal mixing effects in warm dense matter studied with first-principles computer simulations

Here, we study nonideal mixing effects in the regime of warm dense matter (WDM) by computing the shock Hugoniot curves of BN, MgO, and MgSiO 3 . First, we derive these curves from the equations of state (EOS) of the fully interacting systems, which were obtained using a combination of path integral Monte Carlo calculations at high temperature and density functional molecular dynamics simulations at lower temperatures. We then use the ideal mixing approximation at constant pressure and temperature to rederive these Hugoniot curves from the EOS tables of the individual elements. We find that the linear mixing approximation works remarkably well at temperatures above ~2 × 10 5 K, where the shock compression ratio exceeds ~3.2. The shape of the Hugoniot curve of each compound is well reproduced. Regions of increased shock compression, which emerge because of the ionization of L and K shell electrons, are well represented, and the maximum compression ratio of the Hugoniot curves is reproduced with high precision. Some deviations are seen near the onset of the L shell ionization regime, where ionization equilibrium in the fully interacting system cannot be well reproduced by the ideal mixing approximation. This approximation also breaks down at lower temperatures, where chemical bonds play an increasingly important role. However, the results imply that the equilibrium properties of binary and ternary mixtures in the regime of WDM can be derived from the EOS tables of the individual elements. This significantly simplifies the characterization of binary and ternary mixtures in the WDM and plasma phases, which otherwise requires large numbers of more computationally expensive first-principles computer simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Development of uncertainty-aware equation-of-state models: Application to copper

Sophisticated hydrodynamic codes are commonly used to understand and predict events relevant to natural and applied sciences. The degree to which these simulations reflect reality, however, is dependent on how well we understand the materials and underlying physics involved. These research communities need material models that communicate the uncertainty in the physical properties, which at their basest form comes from the uncertainty in the underlying experimental measurements. Additionally, we have constructed a new framework for using both experimental measurements and the associated experimental uncertainties to build equation-of-state models that reflect not only current best measurements but also the accuracy of those measurements. This method had been used to construct an ensemble of equation-of-state models for copper that communicates the experimental uncertainties in the data through the equation-of-state model, which is available for application in any simulation metric of interest.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

High resolution >40 keV x-ray radiography using an edge-on micro-flag backlighter at NIF-ARC

Radiography of low-contrast features in high-density materials evolving on a nanosecond timescale requires a bright photon source in the tens of keV range with high temporal and spatial resolution. One application for sources in this category is the study of dynamic material strength in samples compressed to Mbar pressures at the National Ignition Facility, high-resolution measurements of plastic deformation under conditions relevant to meteor impacts, geophysics, armor development, and inertial confinement fusion. Here, we present radiographic data and the modulation transfer function (MTF) analysis of a multi-component test object probed at ~100 keV effective backlighter energy using a 5 μm-thin dysprosium foil driven by the NIF Advanced Radiographic Capability (ARC) short-pulse laser (~2 kJ, 10 ps). The thin edge of the foil acts as a bright line-projection source of hard x rays, which images the test object at 13.2× magnification into a filtered and shielded image plate detector stack. The system demonstrates a superior contrast of shallow (5 μm amplitude) sinusoidal ripples on gold samples up to 90 μm thick as well as enhanced spatial and temporal resolution using only a small fraction of the laser energy compared to an existing long-pulse-driven backlighter used routinely at the NIF for dynamic strength experiments.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Simultaneous compression and opacity data from time-series radiography with a Lagrangian marker

Time-resolved radiography can be used to obtain absolute shock Hugoniot states by simultaneously measuring at least two mechanical parameters of the shock, and this technique is particularly suitable for one-dimensional converging shocks where a single experiment probes a range of pressures as the converging shock strengthens. However, at sufficiently high pressures, the shocked material becomes hot enough that the x-ray opacity falls significantly. Additionally, if the system includes a Lagrangian marker such that the mass within the marker is known, this additional information can be used to constrain the opacity as well as the Hugoniot state. In the limit that the opacity changes only on shock heating, and not significantly on subsequent isentropic compression, the opacity of the shocked material can be determined uniquely. More generally, it is necessary to assume the form of the variation of opacity with isentropic compression or to introduce multiple marker layers. Alternatively, assuming either the equation of state or the opacity, the presence of a marker layer in such experiments enables the non-assumed property to be deduced more accurately than from the radiographic density reconstruction alone. An example analysis is shown for measurements of a converging shock wave in polystyrene at the National Ignition Facility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Lasing Below 170 nm Using an Oscillator FEL

The short wavelength operation of free-electron laser (FEL) oscillators is limited by the availability of high-reflectivity, thermally stable, and radiation-resistant FEL mirrors in the VUV wavelength. We report our recent work to extend the shortest lasing wavelength of the oscillator FEL to 168.6 nm using a storage ring FEL. This progress has been made possible by developing a new FEL configuration with substantially reduced undulator harmonic radiation on the FEL mirror, a thermally stable FEL optical cavity, and a new type of high-reflectivity fluoride-based multilayer coating with a protective capping layer. Using these fluoride-based mirrors, we have demonstrated storage ring FEL lasing from 168.6 to 179.7 nm with excellent beam stability. Employing this VUV FEL in Compton scattering, we have produced the first 120 MeV gamma rays at the High Intensity Gamma-ray Source (HIGS). Furthermore, operating the HIGS in this new high-energy region will create many new opportunities for photonuclear physics research, in particular, the low-energy QCD research.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Using neutrons and x rays to measure plasma conditions in a solid sphere of deuterated polyethylene compressed to densities of 35 g/cc at temperatures of 2 keV and pressures of 40 Gbar

This paper describes an experiment that shock compresses the center of a solid deuterated polyethylene sphere, CD 2 , to densities of 35 g/cc and temperatures of 2 keV with corresponding pressure of 40 Gbar. The design employs a strong spherically converging shock launched through a solid ball of material using a Hohlraum radiation drive. As the shock coalesces at the center it produces a hot spot that we characterize by measuring the x-ray self-emission and 2.45 MeV neutrons emitted. Two-dimensional images and time-resolved measurements of the x rays emitted determine the size and time duration of the hot spot, leading to an estimated 2k eV electron temperature. The neutron time of flight spectrometer measures an average ion temperature of 1.06 ± 0.15 keV and neutron yield of 7.0 (±0.5) × 10 9 DD neutrons. Our new distribution function tool enables us to create a forward model of the experimental data based on 1D radiation-hydrodynamic simulations, leading to a better understanding of the plasma conditions that produce the measured neutrons and x rays. Furthermore, our simulations indicate that the x rays are produced in a short-lived hot-dense core over tens of picoseconds, whereas the neutron emission continues for about 200 ps, as the hot core starts to expand, thereby leading to a lower mean temperature of the plasma during neutron production. This finding is in agreement with the experimental data, and we therefore conclude that the forward-modeling is a useful tool for inferring the conditions of the hot spot in a laser-driven implosion during burn.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Femtosecond diffraction studies of the sodium chloride phase diagram under laser shock compression

The phase diagram of sodium chloride (NaCl) under laser shock compression has been studied at Linac Coherent Light Source (LCLS) at the x-ray free-electron laser facility. Both solid–solid (B1 → B2) and solid–liquid (B2 → liquid) transitions have been observed along the Hugoniot over nanosecond time scales. By combining structural measurements through in situ x-ray diffraction, pressure determination through velocimetry, and a thermal equation-of-state, the shock-compressed data are used to constrain the phase diagram of NaCl. Transformation into the B2 phase is found to occur at 28(2) GPa, and B2–liquid coexistence is observed between 54(4) and 66(6) GPa, with near full melt at 66(6) GPa. Late-time pressure release from an initial shocked B2-state results in a B2 → B1 back transformation. Our results show agreement with previous static compression data, suggesting that the time scale for melting is very rapid and that equilibrium states in NaCl are being accessed over nanosecond time scales. Finally, a multiphase equation-of-state description of NaCl incorporated into a one-dimensional hydrocode is used to interpret pressure and temperature evolution over these rapid time scales.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Development of slurry targets for high repetition-rate x-ray free electron laser experiments

Combining an x-ray free electron laser with a high-power laser driver enables the study of equations-of-state, high strain-rate deformation processes, structural phase transitions, and transformation pathways as a function of pressure to hundreds of GPa along different thermodynamic compression paths. Future high repetition-rate laser operation will enable data to be accumulated at >1 Hz, which poses a number of experimental challenges, including the need to rapidly replenish the target. Here, we present a combined shock compression and an x-ray diffraction study on epoxy (50% vol.)-crystalline grains (50% vol.) slurry targets, which can be fashioned into extruded ribbons for high repetition-rate operation. For shock-loaded NaCl-slurry samples, we observe pressure, density, and temperature states within the embedded NaCl grains consistent with observations from shock-compressed single-crystal NaCl.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

X-ray source characterization and sample heating on x-ray diffraction experiments at the National Ignition Facility

X-ray diffraction is a powerful measurement technique for determining material properties, and it is now possible to perform these experiments at pressures exceeding 1 TPa [Rygg et al., Rev. Sci. Instrum. 91, 043902 (2020)] at the National Ignition Facility (NIF). The x-ray source for these experiments is the quasi-monochromatic Heα emission from metal foils heated to multi-keV temperatures. A critical aspect for understanding the sample's thermodynamic state is the amount of heating caused by absorption of the probe x-rays. In this work, we characterize the performance of the Ge foil x-ray source over more than 60 NIF x-ray diffraction experiments. We use this information to constrain the level of diffraction sample heating from the x-ray source and discuss the impact on the thermodynamic state.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Laser-driven ramp-compression experiments on the national ignition facility

This report details the analyses and related uncertainties in measuring longitudinal-stress–density paths in indirect laser-driven ramp equation-of-state (EOS) experiments. Experiments were conducted at the National Ignition Facility (NIF) located at the Lawrence Livermore National Laboratory. The NIF can deliver up to 2 MJ of laser energy over 30 ns and provide the necessary laser power and control to ramp compress materials to TPa pressures (1 TPa = 10 × 10 6 atmospheres). These data provide low-temperature solid-state EOS data relevant to the extreme conditions found in the deep interiors of giant planets. In these experiments, multi-stepped samples with thicknesses in the range of 40–120 µm experience an initial shock compression followed by a time-dependent ramp compression to peak pressure. Interface velocity measurements from each thickness combine to place a constraint on the Lagrangian sound speed as a function of particle velocity, which in turn allows for the determination of a continuous stress–density path to high levels of compressibility. In this report, we present a detailed description of the experimental techniques and measurement uncertainties and describe how these uncertainties combine to place a final uncertainty in both stress and density. Here, we address the effects of time-dependent deformation and the sensitivity of ramp EOS techniques to the onset of phase transformations.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Time-resolved X-ray diffraction diagnostic development for the National Ignition Facility

Here we present the development of an experimental platform that can collect four frames of x-ray diffraction data along a single line of sight during laser-driven, dynamic-compression experiments at the National Ignition Facility. The platform is comprised of a diagnostic imager built around ultrafast sensors with a 2-ns integration time, a custom target assembly that serves also to shield the imager, and a 10-ns duration, quasi-monochromatic x-ray source produced by laser-generated plasma. We demonstrate the performance with diffraction data for Pb ramp compressed to 150 GPa and illuminated by a Ge x-ray source that produces ∼7 × 10 11 , 10.25-keV photons/ns at the 400 μm diameter sample.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Cyclically symmetric radially self-similar phononic pseudocrystal isolator for broadband, ultrasonic vibration bandstop filtering

A 2D phononic pseudocrystal isolator exhibiting cyclic symmetry and radial self-similarity is measured and demonstrated to block a wide range of ultrasonic vibration. Measurements of longitudinal and shear wave blocking effects are made and compared with computational results. The use of the bandgap edge ratio is recommended for quantifying suppression in very-wide-bandgap materials. In conclusion, the upper-to-lower suppression edge frequency ratios of 3–4 are remarkably large for shear waves and even larger for longitudinal waves upper-to-lower suppression ratio (13 at 5 dB), such that 92.5% of frequencies in that range experience ≥ 5 dB of suppression.

Acoustic metamaterial↗
DOE OSTI2025

A platform to measure isentropes from proton-heated warm dense matter on short pulse laser facilities

We describe the development of an experimental platform that measures the release isentrope of materials heated isochorically to temperatures of a few electron volts, using short-pulse laser-produced protons to heat the sample and long-pulse laser-produced x rays to perform streaked x-ray radiography. The density profiles derived from the radiography data are integrated to generate pressure–density isentropes, independent of prior knowledge of the equation of state of the sample material. In order to understand the sensitivities of isentrope extraction from radiography data, we analyze synthetic radiographs generated by a radiation hydrodynamics code. Noise reduction and high spatial resolution are critical for isentrope reconstruction, as demonstrated by the analysis of a proof-of-principle shot day on the OMEGA-EP facility. In conclusion, the data demonstrate the feasibility of the platform for characterizing isentropes, and we discuss the necessary improvements to enhance precision in differentiating between equation-of-state models.

Equations of state↗
DOE OSTI2025

Radiation drive designed to extend the pressure ranges measured in Gbar equation of state experiments at the National Ignition Facility

We present the design and demonstration of a Shock-Strengthening hohlraum radiation temperature drive in the Gbar experimental platform at the National Ignition Facility intended to increase the pressure range measured in a single experiment. Previously published experiments by Döppner et al. measured the equation of state in polystyrene from 25 to 60 Mbar. Recent experimental data of the Shock-Strengthening drive initially demonstrated a much larger pressure range from 15 to 110 Mbar using the same peak radiation temperature and experimental platform. The Shock-Strengthening drive starts with a low temperature foot that launches a weak shock into the sample and is followed by a continuous increase in radiation temperature to strengthen the leading shock. The additional strengthening increases the pressure within the sample beyond what is achievable by convergence alone. Design features of the Shock-Strengthening drive and accompanying radiation hydrodynamics simulations are used to illustrate the method by which the pressure range is increased from previous experiments. This method of modifying the radiation temperature drive can be used on the Gbar platform to significantly increase the range for equation of state data collected in a single experiment for many materials.

Physics - Plasma physics↗
DOE OSTI2026

Platform for 100 s Mbar equation of state measurements on the National Ignition Facility

Equation of state (EOS) measurements in the 100 s Mbar range are needed to underwrite models employed in the simulation of high energy density plasmas. To this end, a platform has been developed for fielding on the National Ignition Facility, capable of producing high-quality impedance match EOS data, wherein a planar, high-pressure, steady shock is driven into a sample package, and sample and reference standard shock velocities are measured. This platform, dubbed planar high pressure, or PHP, was fielded with an initial proof-of-concept shot in January 2023. The first PHP shot, aiming to study gold, demonstrated a pressure close to 400 Mbar, two orders of magnitude higher than previously reported gold EOS data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗