SEARCH · Engineering Papers

Results for “STRENGTH CALCULATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Post impact compressive behavior of composites

In this paper, the post impact compressive behavior of polymeric composites is studied both analytically and experimentally. In the analytical study, a closed-form solution is obtained for postbuckling of composites with a circular delamination. Using this solution, the reduced stiffness of the impact damaged region is calculated and the residual compressive strengths of quasi-isotropic laminates are predicted as a function of damage size. In the experimental study, in-plane displacements near the damaged region are determined by employing a micro moire interferometry technique. The strain concentrations as well as the compression-after-impact strength have been measured and compared with analytical predictions. Good agreement between the predicted results and experimental data was observed.

Lin, Kuen Y.↗

NASA NTRS1991

Mechanics of interfaces in fiber reinforced SiC/RBSN ceramic matrix composites

The mechanical behavior of continuous fiber reinforced SiC/RBSN composites with strong and weak interface characteristics is evaluated. Both catastrophic and noncatastrophic failures are observed in tensile specimens. Effects of fiber/matrix interface debonding (splitting) parallel to the fibers are discussed. Micromechanical models incorporating residual stresses to calculate the critical matrix cracking strength, ultimate strength and work of pull-out are reviewed and used to predict composite response. Experimental results are compared to analytical predictions.

Chulya, Abhisak↗

NASA NTRS1993

Theoretical characterization of the reaction NH2 + O yields products

The potential energy surface for NH2+O has been characterized using complete active space self-consistent field (CASSCF)/derivative calculations to determine stationary point geometries and frequencies followed by internally contracted configuration interaction (ICCI) calculations to determine the energetics. The calculations predict a NO bond strength of 85.8 kcal/mol for NH2O. The barrier for isomerization of NH2O to trans-HNOH is predicted to be 48.0 kcal/mol and the barriers for H+HNO forming NH2O and NHOH are predicted to be 2.1 and 8.3 kcal/mol, respectively (all corrected for zero-point energy). The computed heats of formation for NH2O and cis- and trans-HNOH are in good agreement with the present results. The barrier for H + HNO yields H2 + NO is computed to be about 0.3 kcal/mol.

Walch, Stephen P.↗

NASA NTRS1999

Molecular Modeling of the Poling of Piezoelectric Polyimides

The computational method described in this paper allows the calculation of the dielectric relaxation strength of an amorphous polymer based solely upon its chemical structure. The 4,4' oxydiphthalic anhydride (ODPA) dianhydride and bis-aminophenoxybenzene (APB) diamine based polyimides, (beta-CN) APB-ODPA and APB-ODPA were studied. Amorphous cells were constructed and then poled using molecular dynamics. Dielectric relaxation strengths of Delta(epsilon) = 17.8 for (beta-CN) APB-ODPA and Delta(epsilon) = 7.7 for APB-ODPA were predicted. These values are in excellent agreement with the experimental values. It was found that both the pendant nitrile dipole and the backbone anhydride residue dipole make significant contributions to the polyimides dielectric response. Specifically, it was shown that the difference in the magnitude of the dielectric relaxations is directly attributable to the nitrile dipole. The size of the relaxations indicate an absence of cooperative dipolar motions, The model was used to explain these results in terms of the average orientation of the nitrile and anhydride dipoles to within 51 deg. and 63 deg., respectively, of the applied electric field.

Young, J. A.↗

NASA NTRS2003

A Cartesian Adaptive Level Set Method for Two-Phase Flows

In the present contribution we develop a level set method based on local anisotropic Cartesian adaptation as described in Ham et al. (2002). Such an approach should allow for the smallest possible Cartesian grid capable of resolving a given flow. The remainder of the paper is organized as follows. In section 2 the level set formulation for free surface calculations is presented and its strengths and weaknesses relative to the other free surface methods reviewed. In section 3 the collocated numerical method is described. In section 4 the method is validated by solving the 2D and 3D drop oscilation problem. In section 5 we present some results from more complex cases including the 3D drop breakup in an impulsively accelerated free stream, and the 3D immiscible Rayleigh-Taylor instability. Conclusions are given in section 6.

Ham, F.↗

DOE OSTI2022

Model-independent determination of the dipole response of 66 Zn using quasimonoenergetic and linearly polarized photon beams

Background: Photon strength functions are an important ingredient in calculations relevant for the nucleosynthesis of heavy elements. The relation to the photoabsorption cross section allows to experimentally constrain photon strength functions by investigating the photoresponse of atomic nuclei. Purpose: Here, we determine the photoresponse of 66 Zn in the energy region of 5.6 MeV to 9.9 MeV and analyze the contribution of the 'elastic' decay channel back to the ground state. In addition, for the elastic channel electric and magnetic dipole transitions were separated. Methods: Nuclear resonance fluorescence experiments were performed using a linearly polarized quasi-monoenergetic photon beam at the High Intensity γ-ray Source. Photon beam energies from 5.6 to 9.9 MeV with an energy spread of about 3% were selected in steps of 200–300 keV. Two high purity germanium detectors were used for the subsequent γ-ray spectroscopy. Results: Full photoabsorption cross sections are extracted from the data making use of the monoenergetic character of the photon beam. For the ground-state decay channel, the average contribution of electric and magnetic dipole strengths is disentangled. The average branching ratio back to the ground state is determined as well. Conclusions: The new results indicate lower cross sections when compared to the values extracted from a former experiment using bremsstrahlung on 66 Zn. In the latter, the average branching ratio to the ground state is estimated from statistical-model calculations in order to analyze the data. Corresponding estimates from statistical-model calculations underestimate this branching ratio compared to the values extracted from the present analysis, which would partly explain the high cross sections determined from the bremsstrahlung data.

59 ≤ A ≤ 89↗

DOE OSTI2021

Investigation of the isoscalar response of 24 Mg to 6 Li scattering

24 Mg is a strongly deformed nucleus in the ground state. Deformation effects can be observed in the structure of the isoscalar giant monopole and quadrupole resonances. 24 Mg is also a nucleus that is well known to present different types of cluster-oscillation modes. Both giant resonances and cluster states are strongly populated by isoscalar transitions. To extract the E0, E1, and E2 transition strengths via 6 Li scattering. The 6 Li probe is a powerful tool for investigating the isoscalar nuclear response with a very favorable ratio of resonance-to-continuum background. Double-differential cross sections of 6 Li inelastic scattering, at the beam energy of 100 MeV/u, were measured in the excitation-energy range 10 – 40 MeV and scattering angles 0 - 3°. A multipole-decomposition analysis was performed for extracting the isoscalar E0 , E1, and E2 strength distributions. Results: The extracted multipole strengths were compared with predictions from consistent quasiparticle random phase approximation calculations. The theoretical predictions are in fair agreement with the experimental data. The E0 strength was also compared with results from antisymmetrized molecular dynamics calculations found in the literature. A few peaks in the experimental data might be associated with clustering in 24 Mg. Ground-state deformation effects were observed in the isoscalar giant monopole resonance (ISGMR) and isoscalar giant quadrupole resonance (ISGQR) distributions. The ISGMR strength is split in two peaks around 19 and 28 MeV. The ISGQR exhibits a pronounced peak at 20 MeV with a broadening at the low-energy region, similar to predictions from microscopic calculations. Signatures of excitation of cluster states were observed in the E0 response. Further studies including particle-decay measurements will be required to confirm the nature of the observed peaks.

20 ≤ A ≤ 38↗

NASA NTRS1988

Strain intensity factor approach for predicting the strength of continuously reinforced metal matrix composites

A method was previously developed to predict the fracture toughness (stress intensity factor at failure) of composites in terms of the elastic constants and the tensile failing strain of the fibers. The method was applied to boron/aluminum composites made with various proportions of 0 to + or - 45 deg plies. Predicted values of fracture toughness were in gross error because widespread yielding of the aluminum matrix made the compliance very nonlinear. An alternate method was developed to predict the strain intensity factor at failure rather than the stress intensity factor because the singular strain field was not affected by yielding as much as the stress field. Strengths of specimens containing crack-like slits were calculated from predicted failing strains using uniaxial stress-strain curves. Predicted strengths were in good agreement with experimental values, even for the very nonlinear laminates that contained only + or - 45 deg plies. This approach should be valid for other metal matrix composites that have continuous fibers.

Poe, C. C., Jr.↗

NASA NTRS1993

Reliability assessment of thrust chamber cooling concepts using probabilistic analysis techniques

The reliability of OFHC (Oxygen Free High Conductivity) copper and NARloy-Z thrust chambers is assessed by applying probabilistic structural analysis techniques to incorporate design parameter variability and uncertainty. Thrust chambers specifically evaluated are the cylindrical test fixtures employed in a plug-nozzle configuration at the NASA Lewis Research Center. Direct sampling Monte Carlo simulations based on a simplified life prediction methodology established probability densities of firing cycles to structural failure. Simulated cyclic lives demonstrated modest agreement to experiment. Similarly, regions of high structural failure probability were determined using a limit state approach employing calculated cumulative distribution functions for effective stress response and an assumed material strength distribution. A probability of failure of 0.012 was calculated at the center of the coolant channel hot-gas-side wall for an OFHC milled channel. Structural response was found to be sensitive to the uncertainties in the thrust chamber thermal environment and the material's thermal expansion coefficient.

Rapp, Douglas C.↗

NASA NTRS1993

Reliability assessment of thrust chamber cooling concepts using probabilistic analysis techniques

Rapp, Douglas C.↗

NASA NTRS1997

Collision Strengths for Electron Collisional Excitation of S II

Electron collisional excitation strengths for inelastic transitions in S II are calculated using the R-matrix method in a 19-state (3s(sup 2)3p(sup 3)(sup 4)S(sup o), (sup 2)D(sup o), (sup 2)p(sup o), 3s3p(sup 4)(sup 4)P, (sup 2)D, (sup 2)S, 3S(sup 2)3p(sup 2)3d(sup 2)P, (sup 4)F, (sup 4)D, (sup 2)F, (sup 4)P, 3s(sup 2)3p(sup 2)4s(sup 4)P, (sup 2)P, 3s(sup 2)3p(sup 2)4p(sup 2)S(s o), (sup 4)D(sup o), (sup 4)P(sup o), (sup 2)D(sup o), (sup 4)S(sup o), (sup 2)P(sup o)) close-coupling approximation. These target states are represented by extensive configuration-interaction wave functions that give excitation energies and oscillator strengths that are usually in good agreement with the experimental values and the available accurate calculations. The present results for collision strengths are in very good agreement with the recent merged beams energy loss measurement of Liao et al. and agree reasonably well with the 18-state R-matrix calculation of Ramsbottom, Bell, & Stafford, but show significant differences from the 12-state R-matrix calculation of Cai & Pradhan.

Tayal, S. S.↗

NASA NTRS2006

Magnetic-Field Sensitive Line Ratios in EUV and Soft X-ray Spectra

We discovered a class of lines that are sensitive to the strength of the ambient magnetic field, and present a measurement of such a line in Ar IX near 49 A. Calculations show that the magnitude of field strengths that can be measured ranges from a few hundred gauss to several tens of kilogauss depending on the particular ion emitting the line.

Beiersdorfer, P.↗

NASA NTRS1974

The tensile failure modes of metal-matrix composite materials

The strengths of individual boron fibers extracted from various as-received and thermally fatigued aluminum alloy matrix materials were measured. The results are described in terms of a Weibull distribution, and strengths of composites fabricated from these fibers are calculated in terms of lower and upper bounds. Tests conducted on composite specimens indicated that strengths approaching the upper bounds can be achieved in composites fabricated by normal diffusion bonding techniques. Cyclic temperature changes effectively reduced the strength values toward the lower bounds. It was concluded that this effect resulted from the degradation of the strength of the fiber-matrix bond.

Wright, M. A.↗

DOE OSTI2025

Measurements of Gamow-Teller transitions from 59 Co via the 59 Co ⁢(𝑡, 3 He +𝛾) charge-exchange reaction and its application to the stellar electron-capture rates

Electron-capture reactions on iron-group nuclei play a crucial role in the late stages of massive star evolution. Since stellar evolution simulations depend on accurate electron-capture rates—which are highly sensitive to the detailed Gamow-Teller (GT) strength distributions—reliable theoretical models are essential. However, experimental data on GT strength distributions are scarce. High-resolution measurements are therefore vital for benchmarking and improving these theoretical calculations. To provide high-resolution data on Gamow-Teller strength distributions of iron-group nuclei and to compare these results with theoretical calculations within this mass region. Differential cross sections for the 59 Co ⁢(𝑡, 3 He)⁢ 59 Fe charge-exchange reaction at 115 MeV/u were measured using the S800 spectrometer. Furthermore, to resolve individual levels that are not distinguishable in the S800 particle singles data, coincident 𝛾 rays from the 59 Fe residual nucleus were detected by using the Gamma-Ray Energy Tracking In-beam Nuclear Array 𝛾-ray tracking array. Here, the Gamow-Teller transition strength distribution from the ground state of 59 Co to 59 Fe was extracted up to an excitation energy of 10 MeV. Additionally, transition strengths for several low-lying states were determined from coincident 𝛾-ray measurements. Electron-capture rates calculated using the present data indicate that these low-lying states contribute significantly to the overall rates in relevant stellar environments. The experimental results show reasonable agreement with theoretical predictions based on both shell-model and projected shell-model calculations. High-resolution data on Gamow-Teller strength distributions—particularly for individual low-lying states—are essential for accurately determining electron-capture rates in iron-group nuclei. Coincident 𝛾-ray measurements provide a powerful tool for obtaining such detailed information. While the present work demonstrates that shell-model calculations successfully reproduce the experimental results, such comparisons are scarce and more experimental data are desirable.

59 ≤ A ≤ 89↗

NASA NTRS1996

Control of Flowing Liquid Films By Electrostatic Fields in Space

A novel type of lightweight space radiator has been proposed which employs internal electrostatic fields to stop coolant leaks from punctures caused by micrometeorites or space debris. Extensive calculations have indicated the feasibility of leak stoppage without film destabilization for both stationary and rotating designs. Solutions of the evolution equation for a liquid-metal film on an inclined plate, using lubrication theory for low Reynolds numbers, Karman-Pohlhausen quadratic velocity profiles for higher Reynolds numbers, and a direct numerical solution are shown. For verification an earth-based falling-film experiment on a precisely-vertical wall with controllable vacuum on either side of a small puncture is proposed. The pressure difference required to start and to stop the leak, in the presence and absence of a strong electric field, will be measured and compared with calculations. Various parameters, such as field strength, film Reynolds number, contact angle, and hole diameter will be examined. A theoretical analysis will be made of the case where the electrode is close enough to the film surface that the electric field equation and the surface dynamics equations are coupled. Preflight design calculations will be made in order to transfer the modified equipment to a flight experiment.

Bankoff, S. George↗

DOE OSTI2021

Unsaturated Sulfur Crown Ethers Can Extract Mercury(II) and Show Promise for Future Copernicium(II) Studies: A Combined Experimental and Computational Study

The unsaturated hexathia-18-crown-6 (UHT18C6) molecule was investigated for the extraction of Hg(II) in HCl and HNO3 media. This extractant can be directly compared to the recently studied saturated hexathia-18-crown-6 (HT18C6). The default conformation of the S lone pairs in UHT18C6 is endodentate, where the pocket of the charge density, according to the crystal structures, is oriented toward the center of the ring, which should allow better extraction for Hg(II) compared to the exodentate HT18C6. Batch study experiments showed that Hg(II) had better extraction at low acid molarity (ca. 99% in HCl and ca. 95% in HNO 3 ), while almost no extraction was observed above 0.4 M HCl and 4 M HNO 3 (<5%). Speciation studies were conducted with the goal of delineating a plausible extraction mechanism. Density functional theory calculations including relativistic effects were carried out on both Hg(II)-encapsulated HT18C6 and UHT18C6 complexes to shed light on the binding strength and the nature of bonding. Our calculations offer insights into the extraction mechanism. In addition to Hg(II), calculations were performed on the hypothetical divalent Cn(II) ion, and showed that HT18C6 and UHT18C6 could extract Cn(II). Finally, the extraction kinetics were explored to assess whether this crown can extract the short-lived Cn(II) species in a future online experiment.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2024

Magnetic Field Strength Effects on Nucleosynthesis from Neutron Star Merger Outflows

Abstract Magnetohydrodynamic turbulence drives the central engine of post-merger remnants, potentially powering both a nucleosynthetically active disk wind and the relativistic jet behind a short gamma-ray burst. We explore the impact of the magnetic field on this engine by simulating three post-merger black hole accretion disks using general relativistic magnetohydrodynamics with Monte Carlo neutrino transport, in each case varying the initial magnetic field strength. We find increasing ejecta masses associated with increasing magnetic field strength. We find that a fairly robust main r -process pattern is produced in all three cases, scaled by the ejected mass. Changing the initial magnetic field strength has a considerable effect on the geometry of the outflow and hints at complex central engine dynamics influencing lanthanide outflows. We find that actinide production is especially sensitive to magnetic field strength, with the overall actinide mass fraction calculated at 1 Gyr post-merger increasing by more than a factor of 6 with a tenfold increase in magnetic field strength. This hints at a possible connection to the variability in actinide enhancements exhibited by metal-poor, r -process-enhanced stars.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Near-Threshold Dipole Strength in 10 Be with Isoscalar Character

Isoscalar dipole transitions are a distinctive fingerprint of cluster structures. A 1 − resonance at 7.27(10) MeV, located just below the 𝛼-emission threshold, has been observed in the deuteron inelastic scattering reactions off 10 Be. The deformation lengths of the excited states in 10 Be below 9 MeV have been inferred from the differential cross sections using coupled channel calculations. This observed 1 − resonance has isoscalar characteristics and exhausts approximately 5%–15% of the isoscalar dipole energy-weighted sum rule, providing evidence for pronounced 𝛼 cluster structure in 10 Be. The Gamow coupled channel approach supports this interpretation and suggests the near-threshold effect might be playing an important role in this excitation energy domain. Here, the 𝛼 +𝛼 +𝑛 +𝑛 four-body calculation reproduces the observed enhanced dipole strength, implying that the four-body cluster structure is essential to describe the 1 − states in 10 Be.

Cluster models↗