Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHEETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Antarctic ice sheet response to sudden and sustained ice-shelf collapse (ABUMIP)

Antarctica's ice shelves modulate the grounded ice flow, and weakening of ice shelves due to climate forcing will decrease their ‘buttressing’ effect, causing a response in the grounded ice. While the processes governing ice-shelf weakening are complex, uncertainties in the response of the grounded ice sheet are also difficult to assess. The Antarctic BUttressing Model Intercomparison Project (ABUMIP) compares ice-sheet model responses to decrease in buttressing by investigating the ‘end-member’ scenario of total and sustained loss of ice shelves. Although unrealistic, this scenario enables gauging the sensitivity of an ensemble of 15 ice-sheet models to a total loss of buttressing, hence exhibiting the full potential of marine ice-sheet instability. All models predict that this scenario leads to multi-metre (1–12 m) sea-level rise over 500 years from present day. West Antarctic ice sheet collapse alone leads to a 1.91–5.08 m sea-level rise due to the marine ice-sheet instability. Mass loss rates are a strong function of the sliding/friction law, with plastic laws cause a further destabilization of the Aurora and Wilkes Subglacial Basins, East Antarctica. Improvements to marine ice-sheet models have greatly reduced variability between modelled ice-sheet responses to extreme ice-shelf loss, e.g. compared to the SeaRISE assessments.

54 ENVIRONMENTAL SCIENCES↗

Plasma dynamics in laboratory-produced current sheets

Evolution of currents and Ampere forces in current sheets are analyzed on the basis of magnetic measurements. Two new effects are observed in the current distributions at the later stage of the sheet evolution: first, a broadening of the current area at the side edges of the current sheet; second, a generation of reverse currents followed by their propagation from the edges to the center of the sheet. Super-thermal plasma flows moving across the width of the current sheet are observed by spectroscopic methods. The energies of plasma jets are consistent with the spatial structure and time dependences of the Ampere forces in the current sheets. The assumption is advanced that plasma acceleration may be more effective at the regions with lower plasma density, which are located at some distances from the sheet mid-plane. Generation of reverse currents provides an additional confirmation of transfer of energetic plasma jets toward the sheet edges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Chemical pumps and flexible sheets spontaneously form self-regulating oscillators in solution

The synchronization of self-oscillating systems is vital to various biological functions, from the coordinated contraction of heart muscle to the self-organization of slime molds. Through modeling, we design bioinspired materials systems that spontaneously form shape-changing self-oscillators, which communicate to synchronize both their temporal and spatial behavior. Here, catalytic reactions at the bottom of a fluid-filled chamber and on mobile, flexible sheets generate the energy to “pump” the surrounding fluid, which also transports the immersed sheets. The sheets exert a force on the fluid that modifies the flow, which in turn affects the shape and movement of the flexible sheets. This feedback enables a single coated (active) and even an uncoated (passive) sheet to undergo self-oscillation, displaying different oscillatory modes with increases in the catalytic reaction rate. Two sheets (active or passive) introduce excluded volume, steric interactions. This distinctive combination of the hydrodynamic, fluid–structure, and steric interactions causes the sheets to form coupled oscillators, whose motion is synchronized in time and space. We develop a heuristic model that rationalizes this behavior. These coupled self-oscillators exhibit rich and tunable phase dynamics, which depends on the sheets’ initial placement, coverage by catalyst and relative size. Moreover, through variations in the reactant concentration, the system can switch between the different oscillatory modes. This breadth of dynamic behavior expands the functionality of the coupled oscillators, enabling soft robots to display a variety of self-sustained, self-regulating moves.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Time Evolution of the Macroscopic Characteristics of a Thin Current Sheet in the Course of Its Formation in the Earth’s Magnetotail

A numerical model is developed that allows tracing the time evolution of a current sheet from a relatively thick current configuration with isotropic distributions of the pressure and temperature in an extremely thin current sheet, which plays a key role in geomagnetic processes. Such a configuration is observed in the Earth’s magnetotail in the stage preceding a large-scale geomagnetic disturbance (substorm). Thin current sheets are reservoirs of the free energy released during geomagnetic disturbances. The time evolution of the components of the pressure tensor caused by changes in the structure of the current sheet is investigated. It is shown that the pressure tensor in the current sheet evolves in two stages. In the first stage, a current sheet with a thickness of eight to ten proton Larmor radii forms. This stage is characterized by the plasma drift toward the current sheet and the Earth and can be described in terms of the Chu–Goldberger–Low approximation. In the second stage, an extremely thin current sheet with an anisotropic plasma pressure tensor forms, due to which the system is maintained in an equilibrium state. Estimates of the characteristic time of the system evolution agree with available experimental data.

58 GEOSCIENCES↗

Titanium Sheet Fabricated from Powder for Industrial Applications

In collaboration with Ametek and Commonwealth Scientific and Industrial Research Organization (CSIRO), Oak Ridge National Laboratory has evaluated three different methods for converting titanium hydride-dehydride (HDH) powder into thin gauge titanium sheet from a roll compacted preform. Methodologies include sintering, followed by cold rolling and annealing; direct hot rolling of the roll-compacted sheet; and hot rolling of multiple layers of roll compacted sheet that are encapsulated in a steel can. All three methods have demonstrated fully consolidated sheet, and each process route has the ability to produce sheet that meets ASTM B265 specifications. However, not every method currently provides sheet that can be highly formed without tearing. The degree of sintering between powder particles, post processing density, and the particle to particle boundary layer where compositional variations may exist, have a significant effect on the ability to form the sheet into useful components. Uniaxial tensile test results, compositional analysis, bend testing, and biaxial testing of the titanium sheet produced from hydride-dehydride powder will be discussed. Multiple methods of fabrication and the resulting properties can then be assessed to determine the most economical means of making components for industrial applications.

36 MATERIALS SCIENCE↗

Engineering tubular bone using mesenchymal stem cell sheets and coral particles

Highlights: • We developed a novel engineering strategy to solve the limitations of bone grafts. • We fabricated tubular constructs using cell sheets and coral particles. • The composite constructs showed high radiological density and compressive strength. • These characteristics were similar to those of native bone. -- Abstract: The development of bone tissue engineering has provided new solutions for bone defects. However, the cell-scaffold-based approaches currently in use have several limitations, including low cell seeding rates and poor bone formation capacity. In the present study, we developed a novel strategy to engineer bone grafts using mesenchymal stem cell sheets and coral particles. Rabbit bone marrow mesenchymal stem cells were continuously cultured to form a cell sheet with osteogenic potential and coral particles were integrated into the sheet. The composite sheet was then wrapped around a cylindrical mandrel to fabricate a tubular construct. The resultant tubular construct was cultured in a spinner-flask bioreactor and subsequently implanted into a subcutaneous pocket in a nude mouse for assessment of its histological characteristics, radiological density and mechanical property. A similar construct assembled from a cell sheet alone acted as a control. In vitro observations demonstrated that the composite construct maintained its tubular shape, and exhibited higher radiological density, compressive strength and greater extracellular matrix deposition than did the control construct. In vivo experiments further revealed that new bone formed ectopically on the composite constructs, so that the 8-week explants of the composite sheets displayed radiological density similar to that of native bone. These results indicate that the strategy of using a combination of a cell sheet and coral particles has great potential for bone tissue engineering and repairing bone defects.

60 APPLIED LIFE SCIENCES↗

Description and Demonstration of the Coupled Community Earth System Model v2 – Community Ice Sheet Model v2 (CESM2‐CISM2)

Abstract Earth system/ice‐sheet coupling is an area of recent, major Earth System Model (ESM) development. This work occurs at the intersection of glaciology and climate science and is motivated by a need for robust projections of sea‐level rise. The Community Ice Sheet Model version 2 (CISM2) is the newest component model of the Community Earth System Model version 2 (CESM2). This study describes the coupling and novel capabilities of the model, including: (1) an advanced energy‐balance‐based surface mass balance calculation in the land component with downscaling via elevation classes; (2) a closed freshwater budget from ice sheet to the ocean from surface runoff, basal melting, and ice discharge; (3) dynamic land surface types; and (4) dynamic atmospheric topography. The Earth system/ice‐sheet coupling is demonstrated in a simulation with an evolving Greenland Ice Sheet (GrIS) under an idealized high CO 2 scenario. The model simulates a large expansion of ablation areas (where surface ablation exceeds snow accumulation) and a large increase in surface runoff. This results in an elevated freshwater flux to the ocean, as well as thinning of the ice sheet and area retreat. These GrIS changes result in reduced Greenland surface albedo, changes in the sign and magnitude of sensible and latent heat fluxes, and modified surface roughness and overall ice sheet topography. Representation of these couplings between climate and ice sheets is key for the simulation of ice and climate interactions.

Muntjewerf, Laura↗

Electronic and Magnetic Properties of Metal-Doped BN Sheet: A First-Principles Study

Electronic and magnetic properties of BN sheet doped with 3d transition metals (Fe, Co and Ni) have been investigated using ab initio calculations. Our calculations show many interesting physical properties in metal-doped BN sheet. Fe-doped BN sheet is a half-metal with the magnetic moment of 2.0 μB, and Co-doped BN sheet becomes a narrow-gap semiconductor with the magnetic moment of 1.0 μB. However, no magnetic moment is induced on Ni-doped BN sheet, which has the same band gap as pristine BN sheet. Furthermore, Fe atom is easy to form isolated particle on BN sheet, while Ni and Co atoms are likely to form sheet-supported metal nanotemplate. These results are useful for spintronics application and could help in the development of magnetic nanotructures and metallic nanotemplate at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conforming nanoparticle sheets to surfaces with Gaussian curvature

Nanoparticle monolayer sheets are ultrathin inorganic–organic hybrid materials that combine highly controllable optical and electrical properties with mechanical flexibility and remarkable strength. Like other thin sheets, their low bending rigidity allows them to easily roll into or conform to cylindrical geometries. Nanoparticle monolayers not only can bend, but also cope with strain through local particle rearrangement and plastic deformation. This means that, unlike thin sheets such as paper or graphene, nanoparticle sheets can much more easily conform to surfaces with complex topography characterized by non-zero Gaussian curvature, like spherical caps or saddles. Here, we investigate the limits of nanoparticle monolayers’ ability to conform to substrates with Gaussian curvature by stamping nanoparticle sheets onto lattices of larger polystyrene spheres. Tuning the local Gaussian curvature by increasing the size of the substrate spheres, we find that the stamped sheet morphology evolves through three characteristic stages: from full substrate coverage, where the sheet extends over the interstices in the lattice, to coverage in the form of caps that conform tightly to the top portion of each sphere and fracture at larger polar angles, to caps that exhibit radial folds. Through analysis of the nanoparticle positions, obtained from scanning electron micrographs, we extract the local strain tensor and track the onset of strain-induced dislocations in the particle arrangement. By considering the interplay of energies for elastic and plastic deformations and adhesion, we construct arguments that capture the observed changes in sheet morphology as Gaussian curvature is tuned over two orders of magnitude.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

STRUCTURE AND HIGH-FIELD PERFORMANCE OF JELLY ROLL PROCESSED Nb{sub 3}Sn WIRES USING Sn-Ta AND Sn-Ti BASED ALLOY SHEET

Sn-Ta based alloy buttons of different compositions were prepared by the melt diffusion process among constituent metal powders, and then pressed into plates. Meanwhile Sn-Ti based alloy plates were sliced from the melt and cast ingot. Resulting Sn-based alloy plates were rolled into thin sheets. The Sn-based alloy sheet was laminated with a Nb sheet, and wound into a Jelly Roll (JR) composite. The composite was encased in a sheath, and fabricated into a thin wire followed by the heat treatment. The application of hydrostatic extrusion is useful at the initial stage of the fabrication. The JR wires using Sn-Ta and Sn-Ti based alloy sheets show a non-Cu J{sub c} of {approx}250 A/mm{sup 2} and {approx}150 A/mm{sup 2} at 20 T and 22 T, respectively, at 4.2 K. It has been found that the Nb impregnates into the Sn-based alloy layers during the reaction, and Nb{sub 3}Sn layers are synthesized by the mutual diffusion between the Nb sheet and the Sn-based alloy sheet without formation of voids. Sn-Ti based alloy sheets are attractive due to their easiness of mass production. Structure and high-field performance of JR processed Nb{sub 3}Sn wires prepared from Sn-based alloy sheets with different compositions are compared in this article.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Highly confined, enhanced surface fluorescence imaging with two-dimensional silver nanoparticle sheets

A method of obtaining highly confined, enhanced surface fluorescence imaging is proposed using two-dimensional (2D) silver nanoparticle (AgMy) sheets. This technique is based on the localized surface plasmon resonance excited homogeneously on a 2D silver nanoparticle sheet. The AgMy sheets are fabricated at the air–water interface by self-assembly and transferred onto hydrophobic glass substrates. These sheets can enhance the fluorescence only when the excitation wavelength overlaps with the plasmon resonance wavelength. To confirm the validity of this technique, two separate test experiments are performed. One is the epifluorescence microscope imaging of a quantum dot 2D sheet on the AgMy 2D sheet with a SiO{sub 2} spacer layer, where the fluorescence is maximized with the 20 nm SiO{sub 2} layer, determined by the Förster resonance energy transfer distances. The second experiment is the imaging of a single fluorescence bead with a total internal reflection fluorescent microscope. We confirmed that the AgMy sheet provides a 4-fold increase in fluorescence with a 160-nm spatial resolution at 30 ms/frame snapshot. The AgMy sheet will be a powerful tool for high sensitivity and high-resolution real time bioimaging at nanointerfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental investigation of a 1 kA/cm{sup 2} sheet beam plasma cathode electron gun

In this paper, a cold cathode based sheet-beam plasma cathode electron gun is reported with achieved sheet-beam current density ∼1 kA/cm{sup 2} from pseudospark based argon plasma for pulse length of ∼200 ns in a single shot experiment. For the qualitative assessment of the sheet-beam, an arrangement of three isolated metallic-sheets is proposed. The actual shape and size of the sheet-electron-beam are obtained through a non-conventional method by proposing a dielectric charging technique and scanning electron microscope based imaging. As distinct from the earlier developed sheet beam sources, the generated sheet-beam has been propagated more than 190 mm distance in a drift space region maintaining sheet structure without assistance of any external magnetic field.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A planar-sheet nongraphitic zero-bandgap sp 2 carbon phase made by the low-temperature reaction of γ-graphyne

The highest sheet symmetry form of graphyne, with one triple bond between each neighboring hexagon in graphene, irreversibly transforms exothermically at ambient pressure and low temperatures into a nongraphitic, planar-sheet, zero-bandgap phase consisting of intrasheet-bonded sp 2 carbons. The synthesis of this sp 2 carbon phase is demonstrated, and other carbon phases are described for possible future synthesis from graphyne without breaking graphyne bonds. While measurements and theory indicate that the reacting graphyne becomes nonplanar because of sheet wrinkling produced by dimensional mismatch between reacted and nonreacted sheet regions, sheet planarity is regained when the reaction is complete. Although the observed elimination of triple bonds to make parallel planar sp 2 carbon sheets likely requires ordered transformation within each sheet, diffraction data for reacted multisheet stacks indicate that the relative lateral positions of neighboring sheets are disordered, as predicted, since no crystalline diffraction peak (other than for the intersheet spacing) is observed.

Aliev, Ali E. (ORCID:0000000300349707)↗

CURRENT SHEET ENERGETICS, FLARE EMISSIONS, AND ENERGY PARTITION IN A SIMULATED SOLAR ERUPTION

We investigate coronal energy flow during a simulated coronal mass ejection (CME). We model the CME in the context of the global corona using a 2.5D numerical MHD code in spherical coordinates that includes coronal heating, thermal conduction, and radiative cooling in the energy equation. The simulation domain extends from 1 to 20 R{sub s} . To our knowledge, this is the first attempt to apply detailed energy diagnostics in a flare/CME simulation when these important terms are considered in the context of the MHD equations. We find that the energy conservation properties of the code are quite good, conserving energy to within 4% for the entire simulation (more than 6 days of real time). We examine the energy release in the current sheet as the eruption takes place, and find, as expected, that the Poynting flux is the dominant carrier of energy into the current sheet. However, there is a significant flow of energy out of the sides of the current sheet into the upstream region due to thermal conduction along field lines and viscous drag. This energy outflow is spatially partitioned into three separate components, namely, the energy flux flowing out the sides of the current sheet, the energy flowing out the lower tip of the current sheet, and the energy flowing out the upper tip of the current sheet. The energy flow through the lower tip of the current sheet is the energy available for heating of the flare loops. We examine the simulated flare emissions and energetics due to the modeled CME and find reasonable agreement with flare loop morphologies and energy partitioning in observed solar eruptions. The simulation also provides an explanation for coronal dimming during eruptions and predicts that the structures surrounding the current sheet are visible in X-ray observations.

79 ASTRONOMY AND ASTROPHYSICS↗

RADIATING CURRENT SHEETS IN THE SOLAR CHROMOSPHERE

An MHD model of a hydrogen plasma with flow, an energy equation, NLTE ionization and radiative cooling, and an Ohm's law with anisotropic electrical conduction and thermoelectric effects is used to self-consistently generate atmospheric layers over a 50 km height range. A subset of these solutions contains current sheets and has properties similar to those of the lower and middle chromosphere. The magnetic field profiles are found to be close to Harris sheet profiles, with maximum field strengths {approx}25-150 G. The radiative flux F{sub R} emitted by individual sheets is {approx}4.9 Multiplication-Sign 10{sup 5}-4.5 Multiplication-Sign 10{sup 6} erg cm{sup -2} s{sup -1}, to be compared with the observed chromospheric emission rate of {approx}10{sup 7} erg cm{sup -2} s{sup -1}. Essentially all emission is from regions with thicknesses {approx}0.5-13 km containing the neutral sheet. About half of F{sub R} comes from sub-regions with thicknesses 10 times smaller. A resolution {approx}< 5-130 m is needed to resolve the properties of the sheets. The sheets have total H densities {approx}10{sup 13}-10{sup 15} cm{sup -3}. The ionization fraction in the sheets is {approx}2-20 times larger, and the temperature is {approx}2000-3000 K higher than in the surrounding plasma. The Joule heating flux F{sub J} exceeds F{sub R} by {approx}4%-34%, the difference being balanced in the energy equation mainly by a negative compressive heating flux. Proton Pedersen current dissipation generates {approx}62%-77% of the positive contribution to F{sub J} . The remainder of this contribution is due to electron current dissipation near the neutral sheet where the plasma is weakly magnetized.

79 ASTRONOMY AND ASTROPHYSICS↗

PARTICLE DYNAMICS IN THE RECONNECTING HELIOSPHERIC CURRENT SHEET: SOLAR WIND DATA VERSUS THREE-DIMENSIONAL PARTICLE-IN-CELL SIMULATIONS

In this paper, we apply an assumption of the reconnecting heliospheric current sheet (HCS) for explanation of some contradictory results in the experimental detection of the sector boundaries (SBs) from the interplanetary magnetic field and electron pitch-angle measurements. Trajectories, densities, velocity, and pitch-angle distributions of particles accelerated by a super-Dreicer electric field are investigated with 2.5D full kinetic particle-in-cell approach in the HCS assumed to undergo a slow magnetic reconnection process with magnetic field configurations deduced from the solar wind observations. This approach reveals that during motion in a current sheet both kinds of particles, electrons and protons, are to be separated, either fully or partially, with respect to its midplane that can lead to their ejection to the opposite semiplanes that was also observed during the HCS crossings. This separation is found to form Hall's currents and polarization electric field across the current sheet, which distribution over the current sheets allows us to reproduce the magnitudes and temporal profiles of proton and ion velocities measured across the SB (current sheet midplane). This separation process, in turn, divides both kinds of particles on 'transit' and 'bounced' ones depending on a side of the current sheet where they enter it and where they are supposed to be ejected. The transit and bounced protons reproduce rather closely the measured distributions of proton/ion densities about the current sheet midplane with a larger maximum occurring at the heliospheric SB to be formed by the bounced protons and the other two smaller maximums on both sides from the central one to be formed by 'transit' protons. The observed electron distributions of density and energy before and after sector boundary crossings are found to fit the simulated ones for electrons accelerated in a current sheet revealing a sharp increase of density from one side from the HCS boundary and a depression from the other side. The transit electrons are shown to gain energies up to ten of keV while the bounced ones gain only a few tens of eV as often measured in the HCS with a single crossing that results in the bump-in-tail electron distributions leading to Langmuir turbulence. The bounced electrons are shown to be responsible for the increased density of electrons detected at some distance from the HCS boundary (midplane) with the horse shoe-like or medallion- (or locket)-type distributions in pitch angles with the distance, at which electrons turn away from the HCS, being dependent on a magnitude of the guiding magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗

Light-sheet autofluorescence lifetime imaging with a single-photon avalanche diode array

Significance: Fluorescence lifetime imaging microscopy (FLIM) of the metabolic co-enzyme nicotinamide adenine dinucleotide (phosphate) [NAD(P)H] is a popular method to monitor single-cell metabolism within unperturbed, living 3D systems. However, FLIM of NAD(P)H has not been performed in a light-sheet geometry, which is advantageous for rapid imaging of cells within live 3D samples. Aim: We aim to design, validate, and demonstrate a proof-of-concept light-sheet system for NAD(P)H FLIM. Approach: A single-photon avalanche diode camera was integrated into a light sheet microscope to achieve optical sectioning and limit out-of-focus contributions for NAD(P)H FLIM of single cells. Results: An NAD(P)H light-sheet FLIM system was built and validated with fluores cence lifetime standards and with time-course imaging of metabolic perturbations in pancreas cancer cells with 10 s integration times. NAD(P)H light-sheet FLIM in vivo was demonstrated with live neutrophil imaging in a larval zebrafish tail wound also with 10 s integration times. Finally, the theoretical and practical imaging speeds for NAD(P)H FLIM were compared across laser scanning and light-sheet geometries, indicating a 30× to 6× acquisition speed advantage for the light sheet compared to the laser scanning geometry. Conclusions: FLIM of NAD(P)H is feasible in a light-sheet geometry and is attrac tive for 3D live cell imaging applications, such as monitoring immune cell metabolism and migration within an organism.

47 OTHER INSTRUMENTATION↗

TH-AB-209-04: 3D Light Sheet Luminescence Imaging with Cherenkov Radiation

Purpose: To recover a three-dimensional density distribution of luminescent molecular probes located several centimeters deep within a highly scattering tissue. Methods: We developed a novel sheet beam Cherenkov-excited luminescence scanned imaging (CELSI) methodology. The sample was irradiated by a horizontally oriented, vertically scanned 6 MV X-ray sheet beam (200mm × 5mm, 0.2mm vertical step) from a radiotherapy linear accelerator. The resulting Cherenkov light emission – and thus luminescent probe excitation – occurred exclusively along the irradiation plane due to a short diffusion path of secondary particles and Cherenkov photons. Cherenkov-excited luminescence was detected orthogonally to the sheet beam by gated, intensified charge coupled device camera. Analogously to light sheet microscopy, a series of luminescence images was taken for varied axial positions (depths) of the Cherenkov light sheet in sample. Knowledge of the excitation plane position allowed a 3D image stack deconvolution and depth-variant attenuation correction. The 3D image post-processing yielded a true spatial density distribution of luminescent molecules in highly scattering tissue. Results: We recovered a three-dimensional shape and position of 400 µL lesion-mimicking phantom tubes containing 25 µM solution of PtG4 molecular probe from 3 centimeter deep tissue-like media. The high sensitivity of CELSI also allowed resolving 100 micron capillaries of test solution. Functional information of partial oxygen pressure at the site of PtG4 molecular probe was recovered from luminescence lifetime CELSI. Finally, in-vivo sheet beam CELSI localized milimeter-sized PtG4-labelled tumor phantoms in multiple biological objects (hairless mice) from single scan. Conclusion: Presented sheet beam CELSI technique greatly extended the useful depth range of luminescence molecular imaging. More importantly, the light sheet microscopy approach was successfully adapted to CELSI, providing means to recover a completely attenuation-corrected 3D image of luminescent probe distribution. Gated CELSI acquisition yielded functional information of a spatially resolved oxygen concentration map of deep lying targets. This work was supported by NIH research grant R01CA109558 and R21EB017559, as well as by Pilot Grant Funds from the Norris Cotton Cancer Center.

60 APPLIED LIFE SCIENCES↗