Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Raman scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Two-magnon bound states in the Kitaev model in a [111] field

It is now well established that the Kitaev honeycomb model in a magnetic field along the [111] direction harbors an intermediate gapless quantum spin liquid (QSL) phase sandwiched between a gapped non-Abelian QSL at low fields $H < H_{c1}$ and a partially polarized phase at high fields $H > H_{c2}$. Here, we analyze the low-field and high-field phases and phase transitions in terms of single- and two-magnon excitations using exact diagonalization and density matrix renormalization group methods. In this work, we find that the energy to create a bound state of two-magnon $Δ_p$ becomes lower than the energy to create a single spin flip $Δ_s$ near $H_{c2}$. In the entire Kitaev spin liquid, $Δ_p < Δ_s$ and both gaps vanish at $H_{c2}$. We make testable predictions for magnon pairing that could be observable in Raman scattering measurements on Kitaev QSL candidate materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Graviton chirality and topological order in the half-filled Landau level

The fractional quantum Hall state at the Landau level filling factor 5/2 is extremely interesting because it is likely the first non-Abelian state, but its precise nature remains unclear after decades of study. Here we demonstrate this can be resolved by studying the chirality of its graviton excitations, using circularly polarized Raman scattering. We discuss the advantage of this bulk probe over the existing edge probes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hybridization-driven strong anharmonicity in Yb-filled skutterudites

A high-pressure study of the structural and thermal transport properties is carried out on one of the most efficient filled skutterudites, $\mathrm{Yb_{0.3}Co_4Sb_{12}}$, to understand the relatively low thermal conductivity behavior in this family. By combining x-ray diffraction and Raman scattering measurements, we detect a phase transition at around 12.4 GPa. The mode Grüneisen parameters of the observed phonon modes are obtained from the determined bulk modulus and the phonon frequency shifts with pressure. The strong anharmonicity in this material is demonstrated by the obtained large average Grüneisen parameter. We also find the depressed group velocity within the low-frequency range, the flat guest mode avoided crossing with the acoustic-phonon mode, and the significant contribution of optical phonons. The hybridization of the guest atom and host lattice and the related enhanced anharmonicity are suggested to account for the low lattice thermal conductivity in the studied system. So, these findings provide new insight into how phonon-phonon interactions lower lattice thermal conductivity in this important thermoelectric family.

36 MATERIALS SCIENCE↗

Evidence of distinct nonpolar/polar ordering at long/short ranges in relaxor ferroelectrics

Distinct atomic nonpolar/polar ordering is determined at long, intermediate, and short ranges using synchrotron x-ray diffraction, Raman scattering, and pair distribution function data in K 0.5 Na 0.5 NbO 3 -doped BaTiO 3 -based relaxor ferroelectrics, viz., (1 - x) Ba 0.9 Sr 0.1 TiO 3 -x KNN 50. Two different polar phases with distinct symmetries are identified at short/intermediate ranges for x = 0.10, where a monoclinic phase at short ranges gradually transforms into a rhombohedral phase at intermediate ranges. Here, in contrast, a nonpolar phase with average cubic symmetry is found to be stable at long ranges for a wide temperature range (100 ≤ T ≤ 500 K). The polar behavior of short/intermediate-range ordering is quantified in terms of the amplitude of ferroelectric phonon mode $Γ^-_4$ (q = 0, 0, 0) (which corresponds to the zone center of the cubic Brillouin zone). The amplitude of the $Γ^-_4$ phonon mode increases with decreasing temperature, suggesting the enhancement of ferroelectric polarization at short/intermediate ranges on lowering temperatures. Enhanced ferroelectric polarization at low temperature is also visible and evident by ferroelectrostriction and is quantified by the increase in magnitude of spontaneous volume ferroelectrostriction. Consequently, Zero thermal expansion is observed at low temperatures.

36 MATERIALS SCIENCE↗

Thermal disorder and phonon softening in the ferroelectric phase transition of lead titanate

We report a molecular dynamics study of ab initio quality of the ferroelectric phase transition in crystalline PbTi⁢O3. We model anharmonicity accurately in terms of potential energy and polarization surfaces trained on density functional theory data with modern machine learning techniques. Our simulations demonstrate that the transition has a strong order-disorder character, in agreement with diffraction experiments, and provide fresh insight into the approach to equilibrium across the phase transition. We find that the emergence and disappearance of the macroscopic polarization is driven by dipolar switching at the nanometer scale. We also computed the infrared optical absorption spectra in both the ferroelectric and the paraelectric phases, finding good agreement with the experimental Raman frequencies. Often, the almost ideal displacive character of the soft mode detected by Raman scattering in the paraelectric phase has been contrasted with the order-disorder character of the transition suggested by diffraction experiments. We settle this issue by showing that the soft mode coexists with a strong Debye relaxation associated with thermal disordering of the dipoles. The Debye relaxation feature is centered at zero frequency and appears near the transition temperature in both the ferroelectric and the paraelectric phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pump depletion and hot-electron generation in long-density-scale-length plasma with shock-ignition high-intensity laser

Two-dimensional particle-in-cell simulations for laser plasma interaction with laser intensity of 10 16 W/cm 2 , plasma density range of 0.01–0.28$n_c$, and scale length of 230–330 $\textit{μ}$m showed significant pump depletion of the laser energy due to stimulated Raman scattering (SRS) and stimulated Brillouin scattering (SBS) in the low-density region ($n_e$ = 0.01–0.2$n_c$). The simulations identified hot electrons generated by SRS in the low-density region with moderate energy and by two-plasmon-decay near $n_e$ = 0.25$n_c$ with higher energy. The overall hot electron temperature (46 keV) and conversion efficiency (3%) were consistent with the experiment's measurements. Further, the simulations also showed artificially reducing SBS would lead to stronger SRS and a softer hot-electron spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cogeneration of hot electrons from multiple laser-plasma instabilities

Interactions of two plasmon decay (TPD) and side stimulated Raman scattering (SSRS) were studied using 3-D particle-in-cell simulations under ICF-relevant conditions for linearly and circularly polarized lasers. In the linear stage, SSRS took place under n e = 0.235n c and TPD dominated near the quarter-critical density surface and their growth rates agreed with theory. In the nonlinear stage, SSRS reduced TPD through pump depletion. Hot electrons were found to be first accelerated by the SSRS plasma waves and then by TPD plasma waves through a co-generation mechanism. Compared to the linearly polarized case with the same laser intensity, both SSRS and TPD were reduced due to the lower laser amplitude in the circularly-polarized case. As a result, a 30 percent decrease in hot electron flux was observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear transmission of laser light through coronal plasma due to self-induced incoherence

The success of direct laser-driven inertial con nement fusion (ICF) relies critically on the efficient coupling of laser light to plasma. At ignition scale, the absolute stimulated Raman scattering (SRS) instability can severely inhibit this coupling by redirecting and strongly depleting laser light. This article describes a new dynamic saturation regime of the absolute SRS instability near one quarter of the critical density. The saturation occurs when spatiotemporal ion-acoustic fluctuations in the plasma density detune the instability resonance. Here, the dynamic saturation mitigates the strong depletion of laser light and enhances its transmission through the instability region, explaining the coupling of laser light to ICF targets at higher plasma densities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nature of Magnetic Excitations in the High-Field Phase of α–RuCl 3

We present comprehensive electron spin resonance (ESR) studies of in-plane oriented single crystals of α–RuCl 3 , a quasi-two-dimensional material with honeycomb structure, focusing on its high-field spin dynamics. The measurements were performed in magnetic fields up to 16 T, applied along the [110] and [100] directions. Several ESR modes were detected. Combining our findings with recent inelastic neutron- and Raman-scattering data, we identified most of the observed excitations. Most importantly, we show that the low-temperature ESR response beyond the boundary of the magnetically ordered region is dominated by single- and two-particle processes with magnons as elementary excitations. In conclusion, the peculiarities of the excitation spectrum in the vicinity of the critical field are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temperature-Dependent Spin-Lattice Relaxation of the Nitrogen-Vacancy Spin Triplet in Diamond

Spin-lattice relaxation within the nitrogen-vacancy (NV) center’s electronic ground-state spin triplet limits its coherence times, and thereby impacts its performance in quantum applications. We report measurements of the relaxation rates on the NV center’s $|m_s = 0 \rangle ↔ |m_s = ± 1 \rangle$ and $|m_s = -1 \rangle ↔ |m_s = + 1\rangle$ transitions as a function of temperature from 9 to 474 K in high-purity samples. We show that the temperature dependencies of the rates are reproduced by an ab initio theory of Raman scattering due to second-order spin-phonon interactions, and we discuss the applicability of the theory to other spin systems. Using a novel analytical model based on these results, we suggest that the high-temperature behavior of NV spin-lattice relaxation is dominated by interactions with two groups of quasilocalized phonons centered at 68.2(17) and 167(12) meV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural changes induced by electric currents in a single crystal of Pr 2 CuO 4

We demonstrate an approach to the structural and electronic property modification of perovskites, focusing on Pr 2 CuO 4 , an undoped parent compound of a class of electron-doped copper-oxide superconductors. Currents were passed parallel or perpendicular to the copper oxygen layers with the voltage ramped up until a rapid drop in the resistivity was achieved, a process referred to as “flash.” The current was then further increased tenfold in current-control mode. This state was quenched by immersion into liquid nitrogen. Flash can drive many compounds into different atomic structures with new properties, whereas the quench freezes them into a long-lived state. Single-crystal neutron diffraction of as-grown and modified Pr 2 CuO 4 revealed a √10 ×√10 superlattice due to oxygen-vacancy order. The diffraction peak intensities of the superlattice of the modified sample were significantly enhanced relative to the pristine sample. Raman-active phonons in the modified sample were considerably sharper. Measurements of electrical resistivity, magnetization, and two-magnon Raman scattering indicate that the modification affected only the Pr-O layers, but not the Cu-O planes. These results point to enhanced oxygen-vacancy order in the modified samples well beyond what can be achieved without passing electrical current. Our work opens a new avenue toward electric field/quench control of structure and properties of layered perovskite oxides.

36 MATERIALS SCIENCE↗

Floquet engineering of polaritonic amplification in dispersive photonic time crystals

In this study, we investigate the dynamics of dispersive photonic time crystals (PTCs) and their potential applications for controlling light-matter interaction. Using the Lorentz-Drude as dispersive material model, we analyze the effects of periodic modulation of dispersion parameters through both theoretical and numerical analysis, revealing the emergence of hybrid bandgaps from the interaction of polaritonic branches with distinctive characteristics. Our study demonstrates that dispersive PTCs offer novel excitation channels and amplification possibilities, that require lower modulation frequencies compared to nondispersive systems thus alleviating experimental challenges for the realization of PTCs in the optical regime. These findings pave the way for advancements in polaritonic lasing and resonant Raman scattering.

Classical optics↗

Optimal filtering and generation of entangled photons for quantum applications in the presence of noise

Filtering is commonly used in quantum optics to reject noise photons, and also to enable interference between independent photons. However, filtering the joint spectrum of photon pairs can reduce the inherent coincidence probability or loss-independent heralding efficiency. Here we investigate filtering for multiphoton applications based on entanglement and interference (e.g., quantum teleportation). We multiplex C-band entangled photons and C-band classical communications into the same long-distance fibers, which enables scalable low-loss quantum networking but requires filtering of spontaneous Raman scattering noise from classical light. Using tunable-bandwidth filters, low-jitter detectors, and polarization filters, we distribute wavelength-degenerate time-bin entangled photons in the C band (1536.5 nm) over 25 km/25 km standard fibers (50 km) each carrying 10 Gbit/s C-band classical data signals. Narrow filtering enables milliwatt-level C-band power, which exceeds the power achieved by comparable studies by roughly an order of magnitude and could feasibly support terabit per second classical rates. We evaluate how performance depends on pump and filter bandwidths, multipair emission, filter shapes, loss, phase matching, and how quantum information is measured. We find a trade-off between reducing noise impact and increasing single-mode purity, and discuss mitigation methods toward optimal multiphoton applications. Importantly, these results apply to noise in free space and in quantum devices (sources, frequency converters, switches, detectors, etc.) and provide insight into filter-induced degradation of single-photon purity and rates even in noise-free environments.

Thomas, Jordan M. [Fermilab; Northwestern U.]↗

In situ plasmonic tip preparation and validation techniques for scanning tunneling microscopy

Among the many parts constituting a scanning tunneling microscope, the metallic tip is the component that directly interacts with the specimen and plays a critical role in visualizing the physical quantity of interest. While tip materials such as W and Pt–Ir are commonly used for topographic imaging and their preparation is well-documented, the preparation of plasmonic materials such as Ag for tip-enhanced Raman spectroscopy is relatively less standardized. Furthermore, we present several in situ Ag tip preparation and validation techniques for the microscopist to use depending on their intended application, including atomic resolution imaging, scanning tunneling spectroscopy (STM), and tip-enhanced Raman spectro-microscopy in ultrahigh vacuum. Besides optical applications, these methods are not limited to Ag but also applicable to other STM tip materials.

47 OTHER INSTRUMENTATION↗

Adaptive noise canceling for transient absorption microscopy

Significance: Ultrafast fiber lasers are an attractive alternative to bulk lasers for nonlinear optical microscopy for their compactness and low cost. The high relative intensity noise (RIN) of these lasers poses a challenge for pump-probe measurements such as transient absorption and stimulated Raman scattering, along with modalities that provide label-free contrast from the vibrational and electronic structure of molecules. Aim: Digital adaptive filtering was applied to determine the applicability for canceling laser RIN in a transient absorption microscope with an ultrafast fiber laser source. Approach: Digitized signals from the transmitted probe and reference photodetectors were fed to an adaptive filter in MATLAB, running in a noise canceling configuration. This result was then fed to a software lock-in algorithm to demodulate the pump-probe signal. Images were built up one line scan at a time with a 3.5-kHz resonant scanner, with 100× averaging. The imaging target was Bi4Ge3O12, which exhibits nondegenerate two-photon absorption at the pump/probe wavelengths used (530-nm pump and 490-nm probe). Results: Without adaptive noise cancellation, the lock-in output primarily passes the laser RIN within its detection bandwidth, resulting in images that closely follow the linear transmissivity and lack sensitivity to pump-probe time delay. With adaptive noise cancellation in front of the lock-in, the RIN rejection is enough to restore the z-sectioning and sensitivity to pump-probe delay, as expected for transient absorption. Results were limited primarily by noise from the photodetector and analog-to-digital converter. Conclusions: Digital adaptive noise cancellation, even when limited by electronics noise, can recover pump-probe signals by removal of laser RIN, under conditions where averaging alone fails.

42 ENGINEERING↗

Coexistent quantum channel characterization using quantum process tomography with spectrally resolved detection

The coexistence of classical and quantum signals over the same optical fiber is critical for quantum networks operating within the existing communications infrastructure. Here, we characterize the quantum channel that results from distributing approximate single-photon polarization-encoded qubits simultaneously with classical light of varying intensities through a 25 km fiber-optic channel. We use spectrally resolved quantum process tomography with a newly developed Bayesian reconstruction method to estimate the quantum channel from experimental data, both with and without classical noise. Furthermore, we show that the coexistent fiber-based quantum channel has high process fidelity with an ideal depolarizing channel if the noise is dominated by Raman scattering. These results aid future development of quantum repeater designs and quantum error-correcting codes which benefit from realistic channel error models.

Chapman, Joseph↗

Nanofabrication and inspection of fuel capsules for inertial confinement fusion

3D nanofabrication via Two-Photon Polymerization (TPP) provides a unique capability of flexibly fabricating complex structures over 1D-3D dimensions and µm-cm scales with resolutions below 100 nm. In the past years, the Laser-Assisted Nano Engineering (LANE) Group at the University of Nebraska-Lincoln (UNL) has been working closely with the Laboratory of Laser Energetics (LLE) in developing practical TPP approaches to fabricating various target structures for Inertial Confinement Fusion (ICF). At the same time, fuel capsules for ICF experiments should be inspected for surface and wall-embedded defects. Plastics materials [e.g., for example polystyrene (PS)] are the common materials used to make fuel capsules. However, during their manufacturing, capsules usually contain defects (vacuoles) embedded inside the shell walls, which may distort the implosion processes and influence the ICF performance of the capsules. The size of vacuoles is usually in a range from 100 to 2000 nm. Coherent anti-Stokes Raman scattering (CARS) microscope offers the capabilities of inspecting and characterizing the capsule defects. Furthermore, cryo-CARS microscopy was developed to explore how fuel isotope distributed inside target when icing that could not be diagnosed before.

36 MATERIALS SCIENCE↗

Discovery of enhanced lattice dynamics in a single-layered hybrid perovskite

Layered hybrid perovskites exhibit emergent physical properties and exceptional functional performances, but the coexistence of lattice order and structural disorder severely hinders our understanding of these materials. One unsolved problem regards how the lattice dynamics are affected by the dimensional engineering of the inorganic frameworks and their interaction with the molecular moieties. Here, we address this question by using a combination of spontaneous Raman scattering, terahertz spectroscopy, and molecular dynamics simulations. This approach reveals the structural dynamics in and out of equilibrium and provides unexpected observables that differentiate single- and double-layered perovskites. While no distinct vibrational coherence is observed in double-layered perovskites, an off-resonant terahertz pulse can drive a long-lived coherent phonon mode in the single-layered system. This difference highlights the dramatic change in the lattice environment as the dimension is reduced, and the findings pave the way for ultrafast structural engineering and high-speed optical modulators based on layered perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗