Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Radio-Frequency Resonances and Damping in Metallic Magnetic Calorimeter Sensors

Metallic magnetic calorimeters (MMCs) are particle detectors that combine ultra-high energy resolution with a predictable and smooth response based on the physics of paramagnetism. For best energy resolution, MMCs are read out with dc SQUID preamplifiers. Since the ac Josephson effect also makes dc SQUIDs broadband RF sources in the 1–100 GHz range, the SQUID can potentially excite RF modes of the MMC sensor, with negative consequences. Further, the importance of this possibility is magnified in direct-coupled MMCs, where the MMC sensor is part of the SQUID loop to maximize performance. For these reasons, the RF behavior of MMC sensors must be investigated. In this report, we present the results of exploratory RF simulations of MMC sensor modes and damping, and we assess three approaches to damp the parallel-meander direct-coupled MMC without excessive noise increase.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Column separation of tetravalent cerium fission products from trivalent rare earth radio-isotopes

Rapid and efficient isolation of individual rare earth element (REE) radioisotopes from complex mixtures is necessary to support the fields of nuclear forensics, medical isotope production and nuclear physics measurements. The separations must be robust and generate sufficiently high purity samples for subsequent radiological analysis. Current methodologies utilize a laborious two step Ce(IV)-iodate precipitation followed by Ce(IV)-nitrate di-(2-ethylhexyl)phosphoric acid/n-heptane extraction. This work reports an alternative method to isolate Ce fission product isotopes equilibrated with milligrams of cold carrier, from the remaining REE’s using a Ce(IV)/LN-resin (Eichrom Technologies) based separation. Optimization of Ce(IV) loading, REE(III) elution volume and subsequent Ce(III) stripping step utilized 166m Ho tracer. Mixed fission product experiments provided a further test of this LN-resin method, with analysis of purified 141/144 Ce, 147 Nd and 91 Y. Overall, while decontamination factors were lower for the LN-resin method, (vs. the combined precipitation/extraction) the simplicity of the technique and the satisfactory fission product analysis results point to the efficacy of this method.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Assessment of operational availability for the PIP-II Superconducting Radio Frequency linear accelerator facility

Operational availability is a critical performance measure for an accelerator facility in modern time. A high availability enables the facility to serve a wide range of users simultaneously. Consequently, besides pure accelerator physics considerations, newly proposed accelerator facilities account for the availability and reliability aspects in the design phases. It allows incorporation of appropriate mitigation strategies for the most vulnerable systems in the machine and therefore, minimizes unscheduled interruptions during the operation. This report lays out a methodology for the availability assessment of the complete particle accelerator facility and presents an initial assessment of the availability of the newly proposed Proton Improvement Plan-II (PIP-II) accelerator facility at Fermilab. The paper describes a comprehensive reliability model of the PIP-II facility that comprises not only 800 MeV linear accelerator (linac) system but also essential utility systems in the form of cryogenic, water, power and air systems. The paper details estimations of the availability of the PIP-II facility for two operational modes i.e. the nominal operational mode featuring 800 MeV beam and critical operational mode involving operation with the lowest objective beam energy of 600 MeV.

43 PARTICLE ACCELERATORS↗

Design and fabrication of a four-rod radio frequency quadrupole with a variable aperture

Radiofrequency quadrupole (RFQ) linear accelerators with variable aperture cell parameters offer an effective means of accelerating high-intensity ion beams exceeding 100 mA and have been implemented in various RFQ designs. However, in a four-rod RFQ, the use of dielectric perturbation methods to measure the voltage distribution behind the rod electrodes is not applicable when implementing variable aperture geometries, because changes in the rod shape influence the electric field at the location of the perturbation element. Therefore, it was necessary to design the rod profile for each cell such that the electric field distribution behind the rods remains unaffected by changes in the aperture. In this study, we present a method to adjust the voltage distribution by modifying the geometry of the rod electrodes according to each cell's aperture parameters. This design approach enables the integration of variable aperture cells into a four-rod RFQ linac, significantly enhancing the achievable beam current. To ensure uniform capacitance and maintain a constant rod-electrode voltage despite variations in the average aperture radius, we developed a systematic method for shaping the rod electrodes. This method was refined using two-dimensional (2D) and three-dimensional (3D) electromagnetic field simulations to optimize the electrode cross-sectional profiles. The fabricated rod electrodes were then installed in a four-rod RFQ, and the electric field distribution was measured using the perturbation method and tuned by adjusting the base plates. As a result, the measured variation of ±1.1 % confirms that this design methodology can produce a sufficiently uniform voltage distribution for high-current beam acceleration. These results demonstrate the practical feasibility of a variable-aperture four-rod RFQ linac.

43 PARTICLE ACCELERATORS↗

Ubiquitin-specific protease 14 promotes radio-resistance and suppresses autophagy in oral squamous cell carcinoma

Highlights: • USP14 promotes radioresistance of OSCC cells. • USP14 elevates radioresistance of OSCC cells by suppressing apoptosis. • USP14 modulates radioresistance in OSCC by regulating autophagy. Oral squamous cell carcinoma (OSCC) is a common malignant tumor in the world. Radiotherapy is one of the standard therapies for patients with OSCC, but its clinical efficiency is limited due to radioresistance. In this study, we identified a mechanism of such resistance regulated by Ubiquitin-specific protease 14 (USP14). USP14 expression was significantly increased in clinical OSCC tissue samples and cell lines, and OSCC patients with high USP14 expression predicted poor overall survival rate. Additionally, a negative correlation between USP14 and LC3B was observed in patients with OSCC. We then found that irradiation (IR)-reduced cell survival of OSCC cells lines was further decreased when USP14 was knocked down. However, USP14 over-expression significantly promoted the cell viability of OSCC cells after IR treatment. Colony formation analysis confirmed thatafter IR treatment,USP14 knockdown markedly decreased the proliferation of OSCC cells, but over-expressing USP14 significantly up-regulated the proliferative activity of OSCC cells. Furthermore, DNA damage caused by IR was enhanced by USP14 knockdown, while been suppressed in OSCC cells with USP14 over-expression. Additionally, IR-inducedapoptosis was further promoted by USP14 knockdown in OSCC cells, which was, however, significantly abolished by USP14 over-expression.Moreover, our in vivo studies showed that IR-reduced tumor growth and tumor weight were further enhanced by USP14 knockdown in OSCC tumor-bearing nude mice. Finally, we found that USP14 knockdown could promote IR-induced autophagy by increasing LC3BII and γH2AX expression levels in IR-treated OSCC cells. However, this event was markedly abolished by ATG5 knockdown, subsequently restoring the cell proliferation in IR-incubated OSCC cells.Finally, we found that USP14-mediated apoptosis was autophagy-dependent in IR-treated OSCC cells. Taken together, these findings suggested that suppressing USP14 could alleviateradioresistancein OSCC both in vitro and in vivo by inducing apoptosis and autophagy, and thus could be served as a promising therapeutic strategy for OSCC treatment.

60 APPLIED LIFE SCIENCES↗

Towards fast and accurate predictions of radio frequency power deposition and current profile via data-driven modelling: applications to lower hybrid current drive

Three machine learning techniques (multilayer perceptron, random forest and Gaussian process) provide fast surrogate models for lower hybrid current drive (LHCD) simulations. A single GENRAY/CQL3D simulation without radial diffusion of fast electrons requires several minutes of wall-clock time to complete, which is acceptable for many purposes, but too slow for integrated modelling and real-time control applications. The machine learning models use a database of more than 16 000 GENRAY/CQL3D simulations for training, validation and testing. Latin hypercube sampling methods ensure that the database covers the range of nine input parameters ( $n_{e0}$ , $T_{e0}$ , $I_p$ , $B_t$ , $R_0$ , $n_{\|}$ , $Z_{{\rm eff}}$ , $V_{{\rm loop}}$ and $P_{{\rm LHCD}}$ ) with sufficient density in all regions of parameter space. The surrogate models reduce the inference time from minutes to $\sim$ ms with high accuracy across the input parameter space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Combined Optical and Radio-Frequency Measurements of a Lightning Megaflash by the FORTE Satellite

The optical and VHF instrumentation on the Fast On-Orbit Recording of Transient Events (FORTE) satellite is used to document the combined phenomenology evolution of a lightning “megaflash” – mesoscale lightning that propagates laterally over exceptional distances. We identify a FORTE flash whose maximum extent was 82 km and inferred length over multiple distinct branches exceeded 100 km. This flash lasted 1.2 s and produced 250 optical and 591 RF events. We find that the channel development mapped by FORTE’s pixelated lightning imager (LLS) occurred at a typical speed of 2.6x10 5 m s -1 and was accompanied by sustained periods of VHF emission that could individually exceed 100 ms in duration. The impulsive IC events generated by the flash indicate that this development occurred at altitudes between 3 and 8 km. Four +CG strokes were identified in the VHF waveform data that are responsible for two of the three highly-radiant LLS groups (two of the +CGs were not as optically bright as the others). These strokes occurred at different locations throughout the flash footprint with the most distant strokes separated by approximately 50 km. These space-based observations match previous observations of megaflashes as well as ground-based measurements of negative leader development during “spider” lightning, suggesting that FORTE is sensing the same phenomena.

Peterson, Michael Jay↗

Radio Frequency Characteristics of Volcanic Lightning and Vent Discharges

In this study, we analyze the pulse width and spectral content of vent discharges and volcanic lightning flashes. We made measurements of electrical activity with a broadband very high frequency antenna (20–80 MHz) during an explosive eruption of Sakurajima volcano on November 8, 2019. The individual impulses that comprise vent discharges and volcanic lightning were analyzed to determine the fundamental width of the impulses and the rate of fall-off of their energy spectral density. The results show that vent discharges are more similar to volcanic lightning than they are different. Here, the mean pulse width for both vent discharges and volcanic lightning was 50 ns. Both types of electrical activity had similar spectral content; the average slope of the amplitude spectra was –3.4 for both. Further, examination of the pulse width and spectral slope distributions showed that while the distributions of volcanic lightning and vent discharges are statistically distinct from each other, the distribution of vent discharges is a subset of the distribution of volcanic lightning.

58 GEOSCIENCES↗

Saturn's Weather‐Driven Aurorae Modulate Oscillations in the Magnetic Field and Radio Emissions

Abstract The Cassini spacecraft revealed that Saturn's magnetic field displayed oscillations at a period originally thought to match the planetary rotation rate but later found not to. One of many proposed theories predicts that a polar twin‐cell neutral weather system drives this variation, producing observable differences in flows within Saturn's ionosphere. Here, using spectral observations of auroral emission lines taken by the Keck Observatory's Near Infrared Echelle Spectrograph (Keck‐NIRSPEC) in 2017, we derive ion line‐of‐sight velocity maps after grouping spectra into rotational quadrants matching phases of the planetary magnetic field. We measure 0.5 km s −1 wind systems in the ionosphere consistent with predicted neutral twin‐vortex flow patterns. These findings demonstrate that neutral winds in Saturn's polar regions cause the rotational period, as determined via the magnetic field, to exhibit differences and time variabilities relative to the planet's true period of rotation in a process never before seen within planetary atmospheres.

Chowdhury, M. N.↗