Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pyrolysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Hybrid-renewable processes for biofuels production: concentrated solar pyrolysis of biomass residues

The viability of thermochemically-derived biofuels can be greatly enhanced by reducing the process parasitic energy loads. Integrating renewable power into biofuels production is one method by which these efficiency drains can be eliminated. There are a variety of such potentially viable "hybrid-renewable" approaches; one is to integrate concentrated solar power (CSP) to power biomass-to-liquid fuels (BTL) processes. Barriers to CSP integration into BTL processes are predominantly the lack of fundamental kinetic and mass transport data to enable appropriate systems analysis and reactor design. A novel design for the reactor has been created that can allow biomass particles to be suspended in a flow gas, and be irradiated with a simulated solar flux. Pyrolysis conditions were investigated and a comparison between solar and non-solar biomass pyrolysis was conducted in terms of product distributions and pyrolysis oil quality. A novel method was developed to analyse pyrolysis products, and investigate their stability.

09 BIOMASS FUELS↗

Demonstration of pyrolysis based biorefinery concept for biopower, biomaterials and biochar

The goals of this project were to (1) design, build, and operate a 2.5 ton per day integrated biomass fast pyrolysis Pilot Plant to produce large amounts of bioproducts, and (2) test the bioproducts performance for market acceptability to replace petroleum based fuels, chemicals and materials. The project brought together private industry and public institution partners whose specific expertise was applied to engineering scale-up of biomass fast pyrolysis technologies and the development and pre-commercial testing of high quality industrial biofuel and bio-products. The project included the design, construction, and operation of a 2.5 dry ton/day biomass thermal conversion facility based on the ¼ ton per day pyrolysis pilot plant developed at Iowa State. Product testing was to focus on converting non-food agricultural and woody biomass resources into sustainable petroleum replacements for asphalt pavements and roofing shingles, biofuel blends for clean power generation, renewable chemicals and soil amendments while providing bio-carbon sequestration opportunities.The project was terminated upon completion of Task A.3 Detailed Engineering of the 2.5 TPD Fast Pyrolysis Pilot Plant, due to the inability to secure the funding necessary to begin construction of the plant and complete the project.

09 BIOMASS FUELS↗

Effect of Support on Iron-Based Catalyst Toward CO2-Free H2 Production From Methane Pyrolysis

The global demand for low-emission hydrogen production is increasing rapidly due to the potential for hydrogen to substitute conventional fossil fuels in energy-related applications. Among practical technologies such as steam reforming of methane (SMR), water electrolysis, and methane pyrolysis, methane pyrolysis has the most potential to produce economical- and near-zero-emission hydrogen. The reaction during methane pyrolysis produces a solid carbon by-product that can be monetized to offset production costs. However, this route is not without research challenges, and the selective formation of high-value carbon remains a critical issue. Supported nickel, iron, and cobalt, have been widely investigated for methane pyrolysis. Although iron-based catalysts are less active than Ni, iron catalysts offer less resistance to coke formation, are inexpensive, and have a longer lifetime. One area not sufficiently explored is the effect of support materials other than Al2O3 for the iron-based catalysts. Therefore, we investigated a detailed variation of support materials to study their influence on the catalytic performance. Moreover, this study offers a fair and direct comparison among all catalytic materials which were synthesized and studied under identical conditions. This direct comparison of the obtained results is important because results reported in different publications are often not comparable due to very different reaction conditions.

Gull, Nathan↗

Biofuels from Pyrolysis: Catalytic Biocrude Production in a Novel, Short-Contact Time Reactor

Broad Funding Opportunity Announcement Project: RTI is developing a new pyrolysis process to convert second-generation biomass into biofuels in one simple step. Pyrolysis is the decomposition of substances by heating—the same process used to render wood into charcoal, caramelize sugar, and dry roast coffee and beans. RTI’s catalytic biomass pyrolysis differs from conventional flash pyrolysis in that its end product contains less oxygen, metals, and nitrogen—all of which contribute to corrosion, instability, and inefficiency in the fuel-production process. This technology is expected to easily integrate into the existing domestic petroleum refining infrastructure, making it an economically attractive option for biofuels production.

Advanced Fuels↗

Total Acid Value Titration of Hydrotreated Biomass Fast Pyrolysis Oil: Determination of Carboxylic Acids and Phenolics with Multiple End-Point Detection

Total acid value titration has long been used to estimate corrosive potential of petroleum crude oil and fuel oil products. The method commonly used for this measurement, ASTM D664, utilizes KOH in isopropanol as the titrant with potentiometric end point determination by pH sensing electrode and Ag/AgCl reference electrode with LiCl electrolyte. A natural application of the D664 method is titration of pyrolysis-derived bio-oil, which is a candidate for refinery upgrading to produce drop in fuels. Determining the total acid value of pyrolysis derived bio-oil has proven challenging and not necessarily amenable to the methodology employed for petroleum products due to the different nature of acids present. We presented an acid value titration for bio-oil products in our previous publication which also utilizes potentiometry using tetrabutylammonium hydroxide in place of KOH as the titrant and tetraethylammonium bromide in place of LiCl as the reference electrolyte to improve the detection of these types of acids. This method was shown to detect numerous end points in samples of bio-oil that were not detected by D664. These end points were attributed to carboxylic acids and phenolics based on the results of HPLC and GC-MS studies. Additional work has led to refinement of the method and it has been established that both carboxylic acids and phenolics can be determined accurately. Use of pH buffer calibration to determine half-neutralization potentials of acids in conjunction with the analysis of model compounds has allowed us to conclude that this titration method is suitable for the determination of total acid value of pyrolysis oil and can be used to differentiate and quantify weak acid species. The measurement of phenolics in bio-oil is subject to a relatively high limit of detection, which may limit the utility of titrimetric methodology for characterizing the acidic potential of pyrolysis oil and products.

09 BIOMASS FUELS↗

Catalytic pyrolysis using UZM-44 aluminosilicate zeolite

A new family of aluminosilicate zeolites designated UZM-44 has been synthesized. These zeolites are represented by the empirical formula Na.sub.nM.sub.m.sup.k+T.sub.tAl.sub.1-xE.sub.xSi.sub.yO.sub.z where "n" is the mole ratio of Na to (Al+E), M represents a metal or metals from zinc, Group 1, Group 2, Group 3 and or the lanthanide series of the periodic table, "m" is the mole ratio of M to (Al+E), "k" is the average charge of the metal or metals M, T is the organic structure directing agent or agents, and E is a framework element such as gallium. The process involves contacting a carbonaceous biomass feedstock with UZM-44 at pyrolysis conditions to produce pyrolysis gases comprising hydrocarbons. The catalyst catalyzes a deoxygenation reaction converting oxygenated hydrocarbons into hydrocarbons and removing the oxygen as carbon oxides and water. A portion of the pyrolysis gases is condensed to produce low oxygen biomass-derived pyrolysis oil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic pyrolysis using UZM-44 aluminosilicate zeolite

A new family of aluminosilicate zeolites designated UZM-44 has been synthesized. These zeolites are represented by the empirical formula. Na.sub.nM.sub.m.sup.k+T.sub.tAl.sub.1-xE.sub.xSi.sub.yO.sub.z where "n" is the mole ratio of Na to (Al+E), M represents a metal or metals from zinc, Group 1, Group 2, Group 3 and or the lanthanide series of the periodic table, "m" is the mole ratio of M to (Al+E), "k" is the average charge of the metal or metals M, T is the organic structure directing agent or agents, and E is a framework element such as gallium. The process involves contacting a carbonaceous biomass feedstock with UZM-44 at pyrolysis conditions to produce pyrolysis gases comprising hydrocarbons. The catalyst catalyzes a deoxygenation reaction converting oxygenated hydrocarbons into hydrocarbons and removing the oxygen as carbon oxides and water. A portion of the pyrolysis gases is condensed to produce low oxygen biomass-derived pyrolysis oil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methods for deoxygenating biomass-derived pyrolysis oil

Methods for deoxygenating a biomass-derived pyrolysis oil are provided. A method for deoxygenating a biomass-derived pyrolysis oil comprising the steps of combining a biomass-derived pyrolysis oil stream with a heated low-oxygen-pyoil diluent recycle stream to form a heated diluted pyoil feed stream is provided. The heated diluted pyoil feed stream has a feed temperature of about 150.degree. C. or greater. The heated diluted pyoil feed stream is contacted with a first deoxygenating catalyst in the presence of hydrogen at first hydroprocessing conditions effective to form a low-oxygen biomass-derived pyrolysis oil effluent.

09 BIOMASS FUELS↗

Catalyst compositions and use thereof in catalytic biomass pyrolysis

A catalyst is described that is useful for catalytic pyrolysis of biomass to produce a pyrolysis product. The catalyst includes (i) matrix material comprising a support and/or binder, and (ii) at least one metal oxide on the matrix material, wherein the metal oxide comprises metal selected from the group consisting of tungsten, chromium, cobalt, molybdenum, nickel, and combinations thereof. Corresponding catalytic pyrolysis processes and catalytic pyrolysis apparatus are disclosed, in which the catalyst enables the production of low oxygen content, stable liquid intermediates that can be refined to make liquid hydrocarbon fuels.

Dayton, David C.↗

Valorisation of waste tyre by pyrolysis in a moving bed reactor

The aim of this work is to assess the behaviour of a moving bed reactor, based on a screw transporter design, in waste tyre pyrolysis under several experimental conditions. Waste tyre represents a significant problem in developed countries and it is necessary to develop new technology that could easily process big amounts of this potentially raw material. In this work, the influence of the main pyrolysis process variables (temperature, solid residence time, mass flow rate and inert gas flow) has been studied by a thorough analysis of product yields and properties. It has been found that regardless the process operational parameters, a total waste tyre devolatilisation is achieved, producing a pyrolytic carbon black with a volatile matter content under 5 wt.%. In addition, it has been proven that, in the range studied, the most influencing process variables are temperature and solid mass flow rate, mainly because both variables modify the gas residence time inside the reactor. In addition, it has been found that the modification of these variables affects to the chemical properties of the products. This fact is mainly associated to the different cracking reaction of the primary pyrolysis products.

54 ENVIRONMENTAL SCIENCES↗

Ex Situ Catalytic Fast Pyrolysis of Lignocellulosic Biomass to Hydrocarbon Fuels: 2020 State of Technology

Biomass catalytic fast pyrolysis (CFP) research was funded by the Bioenergy Technologies Office (BETO) of the U.S. Department of Energy (DOE) to enable technical breakthroughs to help reduce the cost of conversion of biomass to liquid hydrocarbon fuels. The key goals were to achieve a mature plant modeled Minimum Fuel Selling Price of $3/GGE, with greater than 60% greenhouse gas (GHG) reduction over petroleum derived gasoline by 2022. Experimental results at NREL and PNNL, along with lifecycle analysis by ANL show that we achieved these goals based on performance at the bench scale. A Pt/TiO2 catalyst was used in a fixed bed reactor for upgrading pyrolysis vapors from an upstream fast pyrolysis reactor (ex-situ configuration) to produce CFP oil with 16.5% oxygen content. Subsequent co-hydrotreating of 10 vol% of CFP oil with 90 vol% straight run diesel (SRD) at the bench scale yielded greater than 95% carbon efficiency for the CFP oil portion of the feed. Light oxygenated coproducts were recovered from the off gases from the CFP process via adsorption and subsequent desorption. Aspen Plus modeling of purification of the desorbed stream using the UNIFAC property method showed that acetone and methyl-ethyl-ketone can be purified to chemicals grade and sold as coproducts to benefit the economics and reduce GHG emissions attributed to the fuel product. Some of the key risks and uncertainties associated with this process, and potential future work are mentioned in this report.

09 BIOMASS FUELS↗

Corrosivity Of Pyrolysis Oils

Pyrolysis oils from several sources have been analyzed and used in corrosion studies which have consisted of exposing corrosion coupons and stress corrosion cracking U-bend samples. The chemical analyses have identified the carboxylic acid compounds as well as the other organic components which are primarily aromatic hydrocarbons. The corrosion studies have shown that raw pyrolysis oil is very corrosive to carbon steel and other alloys with relatively low chromium content. Stress corrosion cracking samples of carbon steel and several low alloy steels developed through-wall cracks after a few hundred hours of exposure at 50 C. Thermochemical processing of biomass can produce solid, liquid and/or gaseous products depending on the temperature and exposure time used for processing. The liquid product, known as pyrolysis oil or bio-oil, as produced contains a significant amount of oxygen, primarily as components of water, carboxylic acids, phenols, ketones and aldehydes. As a result of these constituents, these oils are generally quite acidic with a Total Acid Number (TAN) that can be around 100. Because of this acidity, bio-oil is reported to be corrosive to many common structural materials. Despite this corrosive nature, these oils have the potential to replace some imported petroleum. If the more acidic components can be removed from this bio-oil, it is expected that the oil could be blended with crude oil and then processed in existing petroleum refineries. The refinery products could be transported using customary routes - pipelines, barges, tanker trucks and rail cars - without a need for modification of existing hardware or construction of new infrastructure components - a feature not shared by ethanol.

02 PETROLEUM↗

A model of devolatilization behavior in lignite pyrolysis with solid heat carriers

To elucidate the influence of the process conditions on pyrolytic products, the interactions between transport phenomena and pyrolysis kinetics are quantitatively analyzed at the level of a single coal particle. A comprehensive mathematical model is formulated to predict intraparticle multiphysics and devolatilization behaviors; the model contains two correlative one–dimensional unsteady heat conservation equations and ternary mass conservation equations in conjunction with the simplified dusty–gas model. Moreover, a multistep kinetic model of coal devolatilization is adopted to predict the generating rates of the lumped pyrolytic products. Validation of the model against experimental and literature data showed that can predict the transient temperature profiles of a coal particle and the yields of volatiles. Finally, the effects of the main process conditions on the intra– and extra–temperature history of lignite during pyrolysis with solid heat carriers are analyzed. Here, the interactions between physical transport and the pyrolysis reaction are also examined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A simplified integrated framework for predicting the economic impacts of feedstock variations in a catalytic fast pyrolysis conversion process

Feedstock attributes of lignocellulosic biomass, such as particle size, compositional makeup, and moisture content, can vary substantially even within pre-processed materials and have a significant effect on conversion in fast pyrolysis-based processes. However, the economic impacts of these attributes are not well understood. To address this, biomass deconstruction phenomena captured with a versatile particle-scale simulation were linked to techno-economic impacts via reduced-order models. Parametric analysis of the particle-scale model, which was validated using literature data, was used in combination with multiple linear regression models to develop correlations between feedstock attributes and yields of pyrolysis oil, gas, and char. Yields were then correlated with the minimum fuel selling price (MFSP) using a techno-economic model, bridging the gap between physics-based biomass conversion simulations and predictions of MFSP for a catalytic fast-pyrolysis process. Empirical correlations derived from the literature regarding the impact of mineral matter (ash) on oil yield were also considered. The model correlations deployed in the integrated framework capture the impacts of variation in feedstock attributes on the MFSP. Variations in ash were shown to have the biggest impact, varying MFSP by -13%/+22% due to catalytic effects and lower relative amounts of convertible lignocellulosic material. It was also found that, if ash can be controlled to low levels, the increased extractives in forest residues can help compensate for some yield losses associated with increased ash. As a result, other inputs considered (particle size, moisture content, and reactor temperature) had relatively negligible effects on process economics within the ranges analyzed considering particle-scale effects alone.

BIOMASS FUELS↗

Pyrolysis temperature and soil depth interactions determine PyC turnover and induced soil organic carbon priming

Pyrogenic organic carbon (PyC) is a complex, heterogeneous class of thermally altered organic substrates, but its dynamics and how its behavior changes with soil depth remain poorly understood. We conducted a laboratory incubation study to investigate the interactive effects of pyrolysis temperature and soil depth on the turnover of PyC compared to its precursor wood and native SOC (NSOC). We incubated dual-labeled (13C and 15N) jack pine pyrogenic organic matter produced at 300 °C (PyC300), 450 °C (PyC450), and their precursor pine wood in a fine-loamy, mixed-conifer forest soil for 745 days. A mixture of surface (0–10 cm) and subsurface (50–70 cm) forest soils, with and without labeled biomass were incubated in the dark at 55% soil water field capacity and 25 °C. Total 13C from PyC and wood mineralized as 13C-CO2 (as % of C added to soil) declined with an increase in pyrolysis temperature as follows: 54 ± 7.7% for wood, 3.1 ± 0.2% for PyC300, and 0.94 ± 0.08% for PyC450. Furthermore, after 2 years, soil depth interacted with pyrolysis temperature to affect C turnover, with total wood C losses significantly declining from 70.6% in surface soils to 37.5% in subsurface soil, while total losses of PyC300 and PyC450 were unaffected by differences between surface and subsurface soils. Wood induced negative priming (i.e., decreased mineralization rates) in surface soil at days 3 and 60, while PyC300 induced positive priming (i.e., increased mineralization rates) in subsurface soil at day 60. After 2 years, unlabeled NSOC losses increased from 9.2 ± 0.8% of NSOC in unamended treatments to 16.5 ± = 2.6% of NSOC with PyC450 additions. Our results suggest that PyC pyrolyzed at a given temperature can mineralize at similar rates between soil depths, and high amounts of PyC450 in subsurface soils can stimulate NSOC losses. These findings indicate that soil depth imposes critical controls on PyC dynamics belowground.

13C-labeling↗

Modeling of Block of Reactors of High-Temperature Pyrolysis Process Line

The results from mathematical modeling of a block of reactors of a high-temperature hydrocarbon pyrolysis line are presented. Models of tube furnaces for homogeneous pyrolysis with variously designed coils are described as ideal-displacement reactors. Application of a determinative approach to the reaction mechanism and determination of the kinetic parameters for thermal decomposition of hydrocarbons and their use for describing the processes occurring in SRT-1 and SRT-2 pyrolysis furnaces showed agreement between the calculated relationships and the experimental data.

02 PETROLEUM↗

Conceptual process design and techno-economic assessment of ex situ catalytic fast pyrolysis of biomass: A fixed bed reactor implementation scenario for future feasibility

Ex situ catalytic fast pyrolysis of biomass is a promising route for the production of fungible liquid biofuels. There is significant ongoing research on the design and development of catalysts for this process. However, there are a limited number of studies investigating process configurations and their effects on biorefinery economics. Herein we present a conceptual process design with techno-economic assessment; it includes the production of upgraded bio-oil via fixed bed ex situ catalytic fast pyrolysis followed by final hydroprocessing to hydrocarbon fuel blendstocks. This study builds upon previous work using fluidized bed systems, as detailed in a recent design report led by the National Renewable Energy Laboratory (NREL/TP-5100-62455); overall yields are assumed to be similar, and are based on enabling future feasibility. Assuming similar yields provides a basis for easy comparison and for studying the impacts of areas of focus in this study, namely, fixed bed reactor configurations and their catalyst development requirements, and the impacts of an inline hot gas filter. A comparison with the fluidized bed system shows that there is potential for higher capital costs and lower catalyst costs in the fixed bed system, leading to comparable overall costs. The key catalyst requirement is to enable the effective transformation of highly oxygenated biomass into hydrocarbons products with properties suitable for blending into current fuels. Potential catalyst materials are discussed, along with their suitability for deoxygenation, hydrogenation and C–C coupling chemistry. This chemistry is necessary during pyrolysis vapor upgrading for improved bio-oil quality, which enables efficient downstream hydroprocessing; C–C coupling helps increase the proportion of diesel/jet fuel range product. One potential benefit of fixed bed upgrading over fluidized bed upgrading is catalyst flexibility, providing greater control over chemistry and product composition. Since this study is based on future projections, the impacts of uncertainties in the underlying assumptions are quantified via sensitivity analysis. As a result, this analysis indicates that catalyst researchers should prioritize by: carbon efficiency > catalyst cost > catalyst lifetime, after initially testing for basic operational feasibility.

09 BIOMASS FUELS↗