Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Practical Application”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Theory of bubble dynamics in condensed explosive during start-up transient

Test firings with experimental liquid propellant gun systems indicate that the main concern standing in the way of practical application of LPG's is the possibility of unexpected explosions during start up when pressure is rapidly applied to the liquid monopropellant in the chamber. The phenomenon of many collapse-rebound cycles of imploding bubbles is theorized as the probable cause of explosions in LP systems. It may be concluded that LPG safety would be enhanced by choosing an LP with low bulk modulus, as well as low decomposition reaction rate, and that a benign looking DTA trace is not a sufficient quarantee of insensitivity to a pressure induced explosion. It is also shown that pre-pressurizing an LP charge, thus pre-compressing the bubbles near-isothermally, makes the system relatively insensitive to such pressure induced explosions. The applicability of this analysis to the question of acceleration induced explosion of explosive filled warheads is indicated.

Benreuven, M.↗
NASA NTRS1981

Anisotropy of machine building materials

The results of experimental studies of the anisotropy of elastic and strength characteristics of various structural materials, including pressure worked metals and alloys, laminated fiberglass plastics, and laminated wood plastics, are correlated and classified. Strength criteria under simple and complex stresses are considered as applied to anisotropic materials. Practical application to determining the strength of machine parts and structural materials is discussed.

Ashkenazi, Y. K.↗
NASA NTRS1981

Impulsive phase of solar flares. 1: Characteristics of high energy electrons

The variation along a magnetic field line of the energy and pitch angle distribution of high energy electrons injected into a cold hydrogen plasma containing either an open or closed magnetic field structure was investigated. The problem is formulated as a time independent Fokker-Planck Equation for the electron number distribution as a function of the electron energy, electron pitch angle, and the structure of the global magnetic field. Simple analytic solution valid in the small pitch angle regime and for slowly varying magnetic field is presented. For the more general situation a numerical code for solving the Fokker-Planck Equation was used and it was found that the analytic expression agrees well with the numerical results to values of the pitch angle much larger than expected. For most practical applications, one many confidently use the analytic expression instead of having to resort to lengthy numerical computations. These results are useful in the study of the nonthermal models of the impulsive phase of solar flares.

Leach, J.↗
NASA NTRS1980

Plasma chemistry for inorganic materials

Practical application of plasma chemistry to the development of inorganic materials using both low temperature and warm plasmas are summarized. Topics cover: the surface nitrification and oxidation of metals; chemical vapor deposition; formation of minute oxide particles; the composition of oxides from chloride vapor; the composition of carbides and nitrides; freezing high temperature phases by plasma arc welding and plasma jet; use of plasma in the development of a substitute for petroleum; the production of silicon for use in solar cell batteries; and insulating the inner surface of nuclear fusion reactor walls.

Matsumoto, O.↗
NASA NTRS1981

Proposed dynamic phase difference method for the detection of tile debonding from the space shuttle orbiter

A noncontracting, semi-global, dynamic technique was developed for detecting loose tiles on the space shuttle orbiter. In laboratory tests on a single tile, the substrate was excited into lateral motion at a constant frequency and amplitude of 2g. The phase relationship between the motions of tile and substrate was examined by noncontacting probes in order to relate the dynamic properties of the tile SIP system to its fatigue history; by a visual technique using a stroboscope and split screen video monitor for practical application in the field. When the substrate is excited at an appropriate frequency (between 30 and 60 Hz), a good tile moves in phase and a loose tile out of phase with the substrate. The out of phase motion is readily observable in the form of a "beat" between the tile and a reference marker on the substrate.

Zuckerwar, A. J.↗
NASA NTRS1981

Simple formulas for designing an offset multibeam parabolic reflector

Theoretical methods (computer programs) which are available for analyzing reflector performance are of the 'forward' type. Performance parameters can be calculated after the configuration of the reflector is given. In many practical applications, however, the problem is often of the 'inverse' type. The reflector has to be designed on the basis of a given set of performance parameters. Attention is given to a systematic procedure based on simple formulas for solving such an inverse problem. Because of the simplicity of the formulas, the final results obtained from the procedure do not have great accuracy. Thus, they represent only a preliminary design, which can be refined by repeatedly using the forward-type programs.

Lee, S.-W.↗
NASA NTRS1980

Maximum likelihood estimation of label imperfection probabilities and its use in the identification of mislabeled patterns

Estimating label imperfections and the use of estimations in the identification of mislabeled patterns are discussed. Expressions are presented for the asymptotic variances of the probability of correct classification and proportion, and for the maximum likelihood estimates of classification errors and a priori probabilities. Models are developed for imperfections in the labels and classification errors, and expressions are derived for the probability of imperfect label identification schemes resulting in wrong decisions. The expressions are used in computing thresholds and the techniques are given practical applications. The imperfect label identification scheme in the multiclass case is found to amount to establishing a region around each decision surface, and decisions of the label correction scheme are found in close agreement with the analyst-interpreter interpretations of the imagery films. As an example, the application of the maximum likelihood estimation to the processing of Landsat MSS data is discussed.

Chittineni, C. B.↗
NASA NTRS1982

Split Coil Forms for Rotary Transformers

Split cores for rotor and stator windings of rotary transformer mounted around their respective coils (which are in bobbins) and cemented together. This arrangement simplifies winding of stator coil to go in a slot in inner diameter of stator coil. One practical application of rotary transformers fabricated according to this technique is for centrifuges, in which conventional sliprings are of uncertain reliability.

Mclyman, C. W. T.↗
NASA NTRS1981

Technical Communication: Perspectives for the Eighties, Part 1. Proceedings of the Technical Communications Sessions at the 32Nd Annual Meeting of the Conference on College Composition and Communication

Proceeding of the technical communication sessions at the 32nd annual meeting of the Conference on College Composition and Communication held in Dallas, Texas, March 26-28, 1981 are summarized. The proceeding suggest that technical communication has become an important subfield and is becoming an intrinsic part of many undergraduate curricula. Technical communication as a separate discipline, however, is relatively new. For that reason, proceedings that can make current research available as quickly as possible are suggested for preparation. The following topics were addressed: (1) a history and definition of technical writing, (2) the case method is technical communication (3) teaching technical writing (4) oral communication and rhetorical theory, and (5) new approaches in and practical applications of technical writing.

Mathes, J. C.↗
NASA NTRS1982

Theoretical design study of the MSFC wind-wheel turbine

A wind wheel turbine (WWT) is studied. Evaluation of the probable performance, possible practical applications, and economic viability as compared to other conventional wind energy systems is discussed. The WWT apparatus is essentially a bladed wheel which is directly exposed to the wind on the upper half and exposed to wind through multiple ducting on the lower half. The multiple ducts consist of a forward duct (front concentrator) and two side ducts (side concentrators). The forced rotation of the wheel is then converted to power through appropriate subsystems. Test results on two simple models, a paper model and a stainless steel model, are reported. Measured values of power coefficients over wind speeds ranging from 4 to 16 m/s are given. An analytical model of a four bladed wheel is also developed. Overall design features of the wind turbine are evaluated and discussed. Turbine sizing is specified for a 5 and 25 kW machine. Suggested improvements to the original design to increase performance and performance predictions for an improved WWT design are given.

Frost, W.↗
NASA NTRS1982

Nonequilibrium material effects on the behavior of polymeric composite matrices and their related composites

The effects of physical aging on the material properties of some linear and network macromolecular glasses are discussed. The free volume concept is used to describe this behavior. The effect of physical aging on properties of some uniaxial graphite/fiber epoxy resin composites is investigated using stress relaxation in both tensile and flexural modes. The matrix polymers used were resins both of which are based on a 4,4-methylenedianiline derivative of epichlorohydrin with diamino diphenyl sulfone (DDS) as the curing agent. The matrix resin, as used in the practical application in composites, not fully cured and the glass transition of the network was dependent on the curing schedule. The physical aging of the bulk crosslinked epoxy was found to depend on the annealing temperature, and the T sub g of the resin. The physical aging of the composite, monitored by the stress relaxation method, was found to be dependent on the testing direction.

Wilkes, G. L.↗
NASA NTRS1982

The obstacle block as a device to measure turbulent skin friction in compressible flow

The obstacle block, developed as an alternative to the Preston tube for indirectly measuring skin friction on smooth surfaces in incompressible flows, is examined as a device for compressible flows as well. The block, which is congruent with a surface static pressure orifice, has a geometry which is easily specified and thus has a universal calibration. Data from two independent studies are used to establish such a calibration using 'wall' variables, valid for Mach numbers up to about 3. Various aspects concerning practical application of the device are examined, such as sensitivity to yaw and the minimum permissible axial spacing between blocks. Several examples showing the utility of the device are given.

Elfstrom, G. M.↗
NASA NTRS1981

Status and outlook for NASA's Land Remote Sensing Program

Both LANDSAT 2 and LANDSAT 3 are currently in operational status following recovery from technical problems. The LANDSAT D program continues NASA's R&D with the dual objectives of assessing the capabilities of the thematic mapper sensor and evaluating the requirements for an operational land observing system. LANDSAT D' will not be launched until LANDSAT D ceases operation, to provide data continuity through 1988. Future NASA remote sensing programs will continue to emphasize research, technology development, cooperative projects with end users of data and cooperation with the National Oceanic and Atmospheric Administration (NOAA) on transition to an operational land observing system. Technology development should extend the results of research to practical applications through improved ground data processing and information extraction techniques and development of new sensors such as the solid state multi-spectral linear array.

Weinstein, R. H.↗
NASA NTRS1983

Beaufort/Bering 1979 microwave remote sensing data catalog report, 14-24 March 1979

The airborne microwave remote sending measurements obtained by the Langley Research Center in support of the 1979 Sea-Ice Radar Experiment (SIRE) in the Beaufort and Bering Seas are discussed. The remote sensing objective of SIRE was to define correlations between both active and passive microwave signatures and ice phenomena assocated with practical applications in the Arctic. The instruments used by Langley during SIRE include the stepped frequency microwave radiometer (SFMR), the airborne microwave scatterometer (AMSCAT), the precision radiation thermometer (PRT-5), and metric aerial photography. Remote sensing data are inventoried and cataloged in a user-friendly format. The data catalog is presented as time-history plots when and where data were obtained as well as the sensor configuration.

Hirstein, W. S.↗
NASA NTRS1982

Radiometric considerations in remote sensing systems

All sensors systems designed to acquire quantitative data undergo radiometric calibration. The types and potential accuracies of calibration are discussed as well as the needs for calibration in the practical application of sensors. The recent and ongoing experience with the shuttle multispectral infrared radiometer is used as a reference.

Goetz, A. F. H.↗
NASA NTRS1982

Geometrically derived difference formulae for the numerical integration of trajectory problems

An initial value problem for the autonomous system of ordinary differential equations dy/dt = f(y), where y is a vector, is considered. In a number of practical applications the interest lies in obtaining the curve traced by the solution y. These applications include the computation of trajectories in mechanical problems. The term 'trajectory problem' is employed to refer to these cases. Lambert and McLeod (1979) have introduced a method involving local rotation of the axes in the y-plane for the two-dimensional case. The present investigation continues the study of difference schemes specifically derived for trajectory problems. A simple geometrical way of constructing such methods is presented, and the local accuracy of the schemes is investigated. A circularly exact, fixed-step predictor-corrector algorithm is defined, and a variable-step version of a circularly exact algorithm is presented.

Mcleod, R. J. Y.↗
NASA NTRS1983

SC3 - A wing concept for supersonic maneuvering

A supersonic wing design concept that overcomes the problems associated with nonlinear inviscid pressure distribution is presented together with a summary of the supporting theoretical and experimental development program. The key design feature is a conical panel supporting a controlled supercritical conical camber (SC3) crossflow expansion and recompression which permits lift on the upper surface to be obtained without producing an adverse pressure gradient or crossflow shock wave strong enough to separate the boundary layer. The role of aerodynamics in the design implementation is discussed, as are the concept development, the initial design validation on a fabricated and tested SC3 design, and the body and canard interaction effect. The design and testing of an isolated wing with a planform and thickness distribution representative of a practical application are described. Wind-tunnel results show that significant performance gains can be obtained for fighter aircraft using this concept.

Mason, W. H.↗
NASA NTRS1983

Charged particle distributions in Jupiter's magnetosphere

In situ data from the Pioneer and Voyager spacecraft, supplemented by earth-based observations and theoretical considerations, are used as the basis for the present quantitative, compact model of the 1 eV-several MeV charged particle distribution in the Jovian magnetosphere. The thermal plasma parameters of convection speed, number density, and characteristic energy, are specified as functions of position for electrons and for the ion species H(+), O(+), O(2+), S(+), S(2+), S(3+), and Na(+). Major features of the magnetic field, thermal plasma, and trapped particle distributions, are modeled and results for each plasma region are compared with observed spectra. Comparisons show that the model represents the data to within a factor of 2 + or - 1, except where time variations are significant. Practical applications of the model to spacecraft near Jupiter are given.

Divine, N.↗