Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particulates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Effects of meteoroids and space debris on the particulate environment for space station

A large orbiting platform such as Space Station will be subjected to numerous impacts by meteoroids and space debris fragments. These hypervelocity impacts will produce clouds of ejected structural material in the vicinity of the Station. The development of a preliminary model for impact-generated ejecta production which combines the fluxes of meteoroids and space debris fragments with a description of the number of ejecta particles produced by hypervelocity impacts is reported. Modeling results give mean ejecta densities from 30 to 100 percent of the present particulate background limitation of 1 particle 5 microns and larger per orbit per 1 x 10(-5) sr field-of-view as seen by a 1-m-diameter aperture telescope in the 1990's time frame. Projected increases in the space debris flux raise this density to 300 percent of this limitation after 2010. The model is also applied to estimate the vulnerability of metallic claddings on composite structural members to penetration by hypervelocity projectiles, thereby exposing the substrate to atomic oxygen. The estimated annual number of penetrations is from 4 to 8 per square meter of cross-sectional area in the mid 1990's, increasing to more than 40 penetrations per square meter after 2010.

Seebaugh, W. R.↗
NASA NTRS1988

Molecular and particulate contaminants - A contamination data base within ENVIRONET

The Space Transportation System contamination environment appears in the ENVIRONET data base in two parallel chapters, Molecular Contamination and Particulate Environment. The design objectives and a description of the content of this contamination data base are presented. A treatment of the use of the data base is intended to interest the reader in accessing and browsing these chapters. Future plans are discussed briefly, with the emphasis on the approach to providing a dynamic data base.

Barengoltz, Jack↗
NASA NTRS1988

Particulate emissions from a mid-latitude prescribed chaparral fire

Particulate emission from a 400-acre prescribed chaparral fire in the San Dimas Experimental Forest was investigated by collecting smoke aerosol on Teflon and glass-fiber filters from a helicopter, and using SEM and EDAX to study the features of the particles. Aerosol particles ranged in size from about 0.1 to 100 microns, with carbon, oxygen, magnesium, aluminum, silicon, calcium, and iron as the primary elements. The results of ion chromatographic analysis of aerosol-particle extracts (in water-methanol) revealed the presence of significant levels of NO2(-), NO3(-), SO4(2-), Cl(-), PO4(3-), C2O4(2-), Na(+), NH4(+), and K(+). The soluble ionic portion of the aerosol was estimated to be about 2 percent by weight.

Cofer, Wesley R., III↗
NASA NTRS1988

Requirements for particulate monitoring system for Space Station

We recommend that a stereo camera system be utilized as a diagnostic for the particulate environment surrounding the Space Station. This system should have sufficient sensitivity to identify contaminated periods, to isolate the effects of sources and activities and to determine optical clearing times. A reasonable compromise between sensitivity and other operational constraints is recommended. Sensitivity comparable to the film camera systems should suffice, but long periods of unattended operation and remotely controlled exposure sequences are essential requirements.

Green, Byron David↗
NASA NTRS1988

Elevated temperature slow plastic deformation of NiAl/TiB2 particulate composites

The 'XD' process for production of discontinuously-reinforced metal-matrix composites has been used to enhance the high-temperature strength of NiAl-TiB2 composites with particulate densities of up to 30 vol pct. SEM, TEM, and optical characterizations of the resulting microstructures showed the average TiB2 particle size to be about 1 micron, while the average grain of the NiAl matrix was of the order of 10 microns. Elevated temperature compression tests conducted at 1200 and 1300 K indicated flow strengths to increase with TiB2 content, so that the 20 vol pct TiB2-reinforced composite was three times stronger than the unreinforced NiAl; this is ascribed to the very high density of microstructural tangled dislocations, loops, and subgrain boundaries connecting the particles.

Whittenberger, J. Daniel↗
NASA NTRS1989

Thermal infrared (2.5-13.5-micron) spectroscopic remote sensing of igneous rock types on particulate planetary surfaces

The compositional significance of outstanding spectral features in the reflectance spectra of particulate igneous rocks was investigated by analyzing directional reflectance spectra, obtained with an FTIR spectrophotometer at 2.17-13.5 microns, of a suite of well-characterized igneous rocks ground to fine particle size. It was found that, using spectral features associated with the principal Christiansen frequency and with a region of relative transparency between the Si-O stretching and bending bands, it is possible to identify general rock type using the Walter and Salisbury (1989) SCFM chemical index, SCFM, defined as SCFM = SiO2/(SiO2 + CaO + FeO + MgO). It is emphasized, however, that the appearance and the wavelength of these features may be affected by environmental factors.

Salisbury, John W.↗
NASA NTRS1989

Late cataractogenesis caused by particulate radiations and photons in long-lived mammalian species

Radiation cataractogenesis induced by small acute doses of particulate radiations and photons in the New Zealand white rabbit (Oryctolagus cuniculus), the beagle dog (Canis familiaris) and the rhesus monkey (Macaca mulatta) is discussed in the context of the use of animal models to assess the radiation hazards faced by humans during lengthy sojourns in deep space. Attention is paid to (1) the importance of lifespan studies with long-lived species - the above animals have median lifespans in captivity of 5-7, 13-14 and 25 years, respectively; and (2) the magnitudes of possible dose thresholds for cataractogenesis from sparsely ionizing radiations and the modifications of those thresholds by the late degenerative phase of the phenomenon.

Lett, J. T.↗
NASA NTRS1988

Formation of particulates by ion bombardment of cryogenic ice mixtures

An analysis of the particulates which form upon the bombardment of a gaseous mixture reflecting cosmic molecular abundances with H2(+) ions accelerated at 350 keV. The model of Black and Dalgarno (1977) for the Zeta Oph cloud and an observational determination of the interstellar Ar abundances (Simpson et al., 1986) are used to determine the abundances of the gas mixture. The characteristics of the resulting residue are examined, including photographs and absorbance spectra. The possible astrophysical implications of the experiment are discussed.

Wdowiak, T. J.↗
NASA NTRS1989

Microgravity processing of particulate reinforced metal matrix composites

The elimination of such gravity-related effects as buoyancy-driven sedimentation can yield more homogeneous microstructures in composite materials whose individual constituents have widely differing densities. A comparison of composite samples consisting of particulate ceramics in a nickel aluminide matrix solidified under gravity levels ranging from 0.01 to 1.8 G indicates that the G force normal to the growth direction plays a fundamental role in determining the distribution of the reinforcement in the matrix. Composites with extremely uniform microstructures can be produced by these methods.

Morel, Donald E.↗
NASA NTRS1990

Elevated temperature slow plastic deformation of NiAl-TiB2 particulate composites at 1200 and 1300 K

Elevated temperature compression testing has been conducted in air at 1200 and 1300 K with strain rates varying from about 10 to the -4th to about 10 to the -7th/sec on NiAl-TiB2 particulate composites. These materials, which consisted of a B2 crystal structure intermetallic Ni-50 at. pct Al matrix and from 0 to 30 vol pct of approximately 1- micron diameter TiB2 particles, were fabricated by XD synthesis and hot pressed to full density. Flow strength of the composites increased with volume fraction of the strengthening phase with NiAl-30TiB2 being approximately three times stronger than NiAl. Comparison of the light optical and TEM microstructures of as-received and tested samples revealed that reactions did not occur between the two phases, and NiAl-TiB2 interfaces were not cracked during deformation. Additional TEM indicated that the particles stabilize a vastly different microstructure in the NiAl matrix of the composites than that formed in unreinforced NiAl.

Whittenberger, J. Daniel↗
NASA NTRS1991

Particulate organic matter delta C-13 variations across the Drake Passage

Particulate organic matter (POM) was sampled during two cruise transects across the Drake Passage during March 1986 to investigate the unusual C-13 depletion in high-latitude Southern Ocean plankton. This POM delta C-13 transition from -23.2 o/oo at 53.3 deg S to values as low as -30.3 o/oo at above 62 deg S does not track previously reported abrupt changes in water chemistry and plankton species composition associated with the Polar Front Zone. The north-south isotopic trend is not accompanied by significant changes in POM carbon or nitrogen concentrations, or in POM C/N. Differences in plankton standing crop or biochemistry (e.g. lipid content) do not appear responsible for the isotopic trends observed. The latitudinal change in POM delta C-13 is highly correlated with water temperature and with the calculated concentration of CO2 (aq) at equilibrium with atmospheric CO2. These observations are consistent with the hypothesis that CO2 (aq) significantly influences POM delta C-13 in ocean surface waters.

Rau, G. H.↗
NASA NTRS1991

Combined mode I-mode III fracture toughness of a particulate reinforced metal-matrix composite

The aim of this investigation was to determine the fracture behavior of a particulate reinfored aluminum alloy composite under combined mode I-mode III loading conditions. A modified three-point bend specimen was used to carry out these tests. It was found that the mode I loading condition was energetically most favorable. Addition of mode III components to the system seems to increase the amount of redundant work during fracture without affecting the critical fracture criterion.

Manoharan, M.↗
NASA NTRS1991

Laboratory photometric measurement of particulate soils out to very large phase angles

In the present study, the objectives were to develop the laboratory methods and tools to conduct photometric observations of dark particulate samples over a large range of phase angles and to demonstrate whether forward scattering behavior can be seen in a surface constructed of low albedo material. The researchers also examined the adequacy of various model formulations of P (alpha) to describe the effective scattering properties of their sample.

Helfenstein, Paul↗
NASA NTRS1992

Analysis of particulate contamination on tape lift samples from the VETA optical surfaces

Particulate contamination analysis was carried out on samples taken from the Verification Engineering Test Article (VETA) x-ray detection system. A total of eighteen tape lift samples were taken from the VETA optical surfaces. Initially, the samples were tested using a scanning electron microscope. Additionally, particle composition was determined by energy dispersive x-ray spectrometry. Results are presented in terms of particle loading per sample.

Germani, Mark S.↗
NASA NTRS1992

Spacecraft particulate sizing spectrometer

An evaluation prototype device is described, together with conclusions and several recommendations for follow-on flight hardware. The device detects individual particles crossing an external sensing zone, and produces a histogram displaying the size distribution of particles sensed, over the nominal range of 5 to 50 microns. The output is totally independent of the particle refractive index, and is also largely unaffected by particle shape. The reported diameters are in terms of the equivalent sphere, as judged by the scattered light intercepted by the receiving channels, which develop signals whenever a particle crosses the beam of illumination in the sensing zone. Supporting evidence for the latter assertion is discussed on the basis of experimental test data for non-spherical particulates. Also included is a technical appendix which presents theoretical arguments that provide a firm foundation for this assertion.

Miranda, Henry A., Jr.↗
NASA NTRS1992

Composites of low-density trialuminides: Particulate and long fiber reinforcements

An examination of the ternary L1(sub 2) trialuminides, Al66Ti25Mn9, Al67Ti25Cr8, and Al22Ti8Fe3 in compression, bending, and tension revealed that none of these compounds exhibited a desirable balance of strength, ductility, and oxidation resistance. Subsequently, specific quaternary and quinary compositions were cast, homogenized, and isothermally forged. Both, the monolithic material and its particulate reinforced counterparts were examined in compression, three point bend, and tension as a function of temperature, and at high temperatures as a function of strain rate. An alternate approach that was examined in this program to enhance the low temperature damage tolerance of these materials was to incorporate long refractory metal wires in the matrix. In summary, it appears that of the various matrix compositions examined, ternary Al66Ti25Mn9 exhibits the best balance in strength, ductility, and oxidation resistance. Although the idea of refractory metal wire reinforcement is an attractive one, a successful combination remains to be identified.

Kumar, K. S.↗
NASA NTRS1991

Airborne particulate matter and spacecraft internal environments

Instrumentation, consisting of a Shuttle Particle Sampler (SPS) and a Shuttle Particle Monitor (SPM), has been developed to characterize the airborne particulate matter in the Space Shuttle cabin during orbital flight. The SPS size selectively collects particles in four size fractions (0-2.5, 2.5-10, 10-100, and greater than 100 microns) which are analyzed postflight for mass concentration and size distribution, elemental composition, and morphology. The SPM provides a continuous record of particle concentration through photometric light scattering. Measurements were performed onboard Columbia, OV-102, during the flight of STS-32 in January 1990. No significant changes were observed in the particle mass concentration, size distribution, or chemical composition in samples collected during flight-day 2 and flight-day 7. The total mass concentration was 56 microg/cu cm with approximately half of the particles larger than 100 microns. Elemental analysis showed that roughly 70 percent of the particles larger than 2.5 microns were carbonaceous with small amounts of other elements present. The SPM showed no temporal or spatial variation in particle mass concentration during the mission.

Liu, Benjamin Y. H.↗
NASA NTRS1991

Mechanical properties of monolithic and particulate composites of L12 forms of Al3Ti

Preliminary studies of simple compressive properties of particulate composites with L1(2)-modified Al3Ti's as the matrices were performed as functions of matrix composition, amount of TiB2, processing technique, temperature, and strain rate. At and below about 900 K the introduction of TiB2 particles overwhelms minor chemical effects, and extremely high-yield strengths (about 2000 MPa at the 20 vol pct TiB2 level) were obtained. As L1(2)-modified Al3Ti has about half the density of the Ni-base superalloys, such values translate to strength/density ratios approximately four times those for superalloys. This advantage is not maintained by the Al3Ti-based composites above about 1000 K, particularly under slow strain rate plastic flow conditions, and it is proposed that this behavior could be due to the dissolution of intermetallic second phases as well as grain boundary creep mechanisms.

Whittenberger, J. D.↗