Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRODUCTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Recommended Nuclear Data for the Production of Selected Therapeutic Radionuclides

Increasing interest in the treatment of human disease by means of targeted radionuclide-based therapies requires an accurate understanding of achievable yields and quantification of realisable degrees of purity. Important studies within a more extensive Coordinated Research Project of the International Atomic Energy Agency (IAEA CRP) have included in-depth assessments and evaluations of all available measured cross-section data for ten nuclear reactions leading to the formation of 131 Cs, 131 Ba, 225 Ac, 225 Ra, 227 Th, 227 Ac, 230 U and 230 Pa for various on-going and proposed therapeutic applications in nuclear medicine. Equivalent studies were also undertaken of possible reactions to produce the 178W /low-spin 178m Ta generator system that has been clinically applied in diagnosis by means of SPECT - these particular cross-section studies and recommendations are included in this paper for completeness. All available measured data have been critically reviewed and assessed to produce statistically consistent datasets. Selected datasets have been fitted by a least-squares method with Padé approximations of variable order to evaluate the production cross sections and corresponding uncertainties. New measurements have been made in some instances, and reported data have been adjusted to accommodate new nuclear decay or monitor reaction data which altered the original reported quantities adversely. Insufficient measured data are available in many cases to permit a reliable evaluation of cross sections, and these instances are discussed. Finally, recommended therapeutic radionuclide production reaction data and their uncertainties are available on the Web page of the IAEA Nuclear Data Section at www-nds.iaea.org/radionuclides/ and also at the IAEA medical portal www-nds.iaea.org/medportal/.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Photon and Z production, and γ/Z-jet correlations in lead–lead collisions at the LHC with ATLAS

ATLAS results on the production of photons and Z bosons in lead-lead collisions at the LHC are presented. Their production rates are found to scale with the number of binary collisions, as expected from QCD factorization at large transverse momentum. This makes them an ideal tool for probing the modification of jets which balance their transverse momentum. Despite the large differences in available statistics, both channels show a strong modification of the energy of the recoil jets, which increases with centrality.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Production of inclusive Υ{hooktop}(1S) and Υ{hooktop}(2S) in p–Pb collisions at √ s NN = 5.02 TeV

We report on the production of inclusive Y{hooktop}(1S) and Y{hooktop} (2S) in p–Pb collisions at √ s NN = 5.02 TeV at the LHC. The measurement is performed with the ALICE detector at backward (-4.46< ycms <-2.96) and forward (2.03< ycms <3.53) rapidity down to zero transverse momentum. The production cross sections of the Υ{hooktop}(1S) and Υ{hooktop}(2S) are presented, as well as the nuclear modification factor and the ratio of the forward to backward yields of Υ{hooktop}(1S). A suppression of the inclusive Υ{hooktop}(1S) yield in p–Pb collisions with respect to the yield from pp collisions scaled by the number of binary nucleon–nucleon collisions is observed at forward rapidity but not at backward rapidity. The results are compared to theoretical model calculations including nuclear shadowing or partonic energy loss effects.

Abelev, B.↗

Experimental tests on commercial Sweet Product Residue (SPR) as a suitable feed for anaerobic bioenergy (H2 + CH4) production

Highlights: • Post-sale refuses was tested as feed for two-step-Anaerobic Digestion (TSAD). • Extrusion was assessed at pilot plant scale process to remove the packaging. • NaOH Pretreatment was evaluated in order to increase the refuses digestibility. • H{sub 2} + CH{sub 4} production via TSAD process was experimentally evaluated. • Energy Sustainability Index were used to evaluate the process: pretreatment + TSAD. - Abstract: Food stores can find themselves in the position of having to dispose of different types of products, such as snacks, confectionery, prepackaged food, drinks and others, Sweet Product Residue (SPR), which presents a great opportunity to produce energy through Anaerobic Digestion (AD), due to its high sugar, carbohidrate and fat contents. In order to valorise SPR, this paper takes into consideration the all necessary treatments; owing the fact that the refuses are constitute by an organic part and packaging (plastic, paper and their combinations), a pretreatment able to remove the latter is necessary. SPR refuse was initially subjected to novel pretreatment approach: extrusion at 200 atm to remove the packaging, and a Basic Pre-treatment (BP) then tested through a Two-Stage AD (TSAD) process, for H{sub 2} and CH{sub 4} productions. The experimental results were analysed considering three parameters: Efficiency (ξ), which takes into account the quantity of the energy produced as hydrogen plus methane that the bioreaction is able to extract; Efficacy (η), which takes into account the efficiency of the actual test, compared with that obtained from a reference test carried out with glucose; Energy Sustainability Index (ESI), which takes into account the total amount of energy produced as H{sub 2} plus CH{sub 4}, and the amount of energy consumed to pre-treat the refuse. The effectiveness of the extrusion process in removing the packaging was very high: about 80% of the organic part present in the SPR was recovered. The obtained results have pointed out that SPR is suitable for energy valorization process: ξ = 50%, η = 0.67 and ESI = 24.4, without the need of basic pre-treatment.

09 BIOMASS FUELS↗

Co-Location of Cellulosic Bioethanol and Alcohol-to-Jet (ATJ) Production Facilities for Targeted Scale-Up of Sustainable Aviation Fuel (SAF) Production

Achieving aerospace industry net-zero emissions by 2050 requires rapid scaling of sustainable aviation fuel (SAF) production. Leveraging existing infrastructure, proven technologies like Alcohol-to-Jet (ATJ), and low carbon intensity (CI) feedstocks (e.g., switchgrass and miscanthus) can support this transition and help achieve near-term emissions reduction targets. This study evaluates the implications of lignocellulosic ethanol biorefinery siting and integration with petroleum refineries to produce SAF across 1000 sites randomly sampled from areas suitable for perennial grasses in the U.S. rainfed region. To better understand the logistics of material transport and handoffs, we integrated models of biomass harvest, transport, ethanol, and ATJ production in a stochastic framework based on Monte Carlo simulations to characterize SAF minimum selling price (MSP) and carbon intensity (CI), considering site-specific parameters (e.g., feedstock production, transportation, taxes, incentives). The results indicate trade-offs between MSP and CI across locations, with median MSP ranging from 7.9 to 12.8 USD·gal −1 and CI from −9.7 to 39.4 gCO 2 e·MJ −1 . Despite high estimated decarbonization costs (580 USD·tonCO 2 e −1 ), our results indicate that site-specific deployment of ATJ with low-CI feedstocks can improve sustainability outcomes. The framework provides a systematic approach to assess cost and sustainability trade-offs across locations, considering the end-to-end supply chain and supporting an informed investment in SAF production.

09 BIOMASS FUELS↗

Predicting Reaction Products and Automating Reactive Trajectory Characterization in Molecular Simulations with Support Vector Machines

A machine learning-based methodology for the prediction of chemical reaction products, along with automated elucidation of mechanistic details via phase space analysis of reactive trajectories, is introduced using low-dimensional heuristic models and then applied to ab initio computer simulations of the photodissociation of acetaldehyde, an important chemical system in atmospheric chemistry. Our method is centered around training Support Vector Machines (SVMs) to identify optimal separatrices that delineate the regions of phase space that lead to different chemical reaction products. In contrast to the more common “black box” type machine learning methodologies for analyzing chemical simulation data, this SVM-based methodology allows for mechanistic insight to be gleaned from further analysis of the positioning of the phase space points used to train the SVM with respect to the separatrices. For example, a pair of phase space points that are in close proximity to each other but on opposite sides of a separatrix may be situated on opposite sides of a transition state, while phase space points occurring early in a simulation that are distant from a separatrix are likely to belong to trajectories that are highly biased toward the product state associated with the basin of attraction to which they belong. In addition to inferring mechanistic details about multiple-pathway chemical reactions, our method can also be used to increase reactive trajectory sampling efficiency in molecular simulations via rejection sampling, with trajectories leading to undesired product states being identified and terminated early in the simulation rather than being carried to completion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Significance of Lignin S/G Ratio in Biomass Recalcitrance of Populus trichocarpa Variants for Bioethanol Production

Lignin S/G ratio has been investigated as an important factor in biomass recalcitrance to bioethanol production. Because of the complexity and variety of biomass, recalcitrance was also reportedly influenced by several other factors, such as total lignin content, degree of cellulose polymerization, etc. In addition, the effect of S/G ratio on biomass conversion is not uniform across plant species. Herein, 11 Populus trichocarpa natural variants grown under the same conditions with similar total lignin content were selected to minimize the effects of other factors. The lignin S/G ratio of the selected P. trichocarpa natural variants showed negative correlations with p-hydroxybenzoate (PB) and ..beta..-5 linkage contents, while it had positive ones with ..beta..-O-4 linkage, lignin molecular weight, and ethanol production. This study showed the importance of lignin S/G ratio as an independent recalcitrance factor that may aid future energy crop engineering and biomass conversion strategies.

09 BIOMASS FUELS↗

Electrochemical Detection of Transient Cobalt Hydride Intermediates of Electrocatalytic Hydrogen Production

We report the use of variable scan rate cyclic voltammetry to detect transient CoIIIH and CoIIH intermediates of electrocatalytic H2 production by CoII(dmgBF2)2(CH3CN)2 and [CoII(PtBu2NPh2)(CH3CN)3]2+. In both cases, reduction of the CoIIIH intermediate was observed to coincide with the CoII/I couple, and the resulting CoIIH intermediate is protonated by acid to afford H2. Our studies indicate that in electrocatalytic H2 production, protonation of CoIIH is rate-limiting for CoII(dmgBF2)2(CH3CN)2, and protonation of CoI is rate-limiting for [CoII(PtBu2NPh2)(CH3CN)3]2+. This research was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences. Pacific Northwest National Laboratory is operated by Battelle for the U.S. Department of Energy.

cobalt, electrocatalysis, hydrogen↗

Increased Stability Toward Oxygen Reduction Products for Lithium-Air Batteries with Oligoether-Functionalized Silane Electrolytes

The successful development of Li-air batteries would significantly increase the possibility of extending the range of electric vehicles. There is much evidence that typical organic carbonate based electrolytes used in lithium ion batteries form lithium carbonates from reaction with oxygen reduction products during discharge in lithium-air cells so more stable electrolytes need to be found. This combined experimental and computational study of an electrolyte based on a tri(ethylene glycol)-substituted trimethylsilane (1NM3) provides evidence that the ethers are more stable toward oxygen reduction discharge species. X-ray photoelectron spectroscopy (XPS) and FTIR experiments show that only lithium oxides and no carbonates are formed when 1NM3 electrolyte is used. In contrast XPS shows that propylene carbonate (PC) in the same cell configuration decomposes to form lithium carbonates during discharge. Density functional calculations of probable decomposition reaction pathways involving solvated oxygen reduction species confirm that oligoether substituted silanes, as well as other ethers, are more stable to the oxygen reduction products than propylene carbonate. These results indicate that the choice of electrolyte plays a key role in the performance of Li-air batteries.

Environmental Molecular Sciences Laboratory↗

A cell-free platform for the prenylation of natural products and application to cannabinoid production

Prenylation of natural compounds adds structural diversity, alters biological activity, and enhances therapeutic potential. Because prenylated compounds often have a low natural abundance, alternative production methods are needed. Metabolic engineering enables natural product biosynthesis from inexpensive biomass, but is limited by the complexity of secondary metabolite pathways, intermediate and product toxicities, and substrate accessibility. Alternatively, enzyme catalyzed prenyl transfer provides excellent regio- and stereo-specificity, but requires expensive isoprenyl pyrophosphate substrates. Here we develop a flexible cell-free enzymatic prenylating system that generates isoprenyl pyrophosphate substrates from glucose to prenylate an array of natural products. The system provides an efficient route to cannabinoid precursors cannabigerolic acid (CBGA) and cannabigerovarinic acid (CBGVA) at >1 g/L, and a single enzymatic step converts the precursors into cannabidiolic acid (CBDA) and cannabidivarinic acid (CBDVA). Cell-free methods may provide a powerful alternative to metabolic engineering for chemicals that are hard to produce in living organisms.

60 APPLIED LIFE SCIENCES↗

Recent developments in the production of liquid fuels via catalytic conversion of microalgae: experiments and simulations

Due to continuing high demand, depletion of non-renewable resources and increasing concerns about climate change, the use of fossil fuel-derived transportation fuels faces relentless challenges both from a world markets and an environmental perspective. The production of renewable transportation fuel from microalgae continues to attract much attention because of its potential for fast growth rates, high oil content, ability to grow in unconventional scenarios, and inherent carbon neutrality. Moreover, the use of microalgae would minimize ‘‘food versus fuel’’ concerns associated with several biomass strategies, as microalgae do not compete with food crops in the food chain. This paper reviews the progress of recent research on the production of transportation fuels via homogeneous and heterogeneous catalytic conversions of microalgae. This review also describes the development of tools that may allow for a more fundamental understanding of catalyst selection and conversion processes using computational modelling. The catalytic conversion reaction pathways that have been investigated are fully discussed based on both experimental and theoretical approaches. Finally, this work makes several projections for the potential of various thermocatalytic pathways to produce alternative transportation fuels from algae, and identifies key areas where the authors feel that computational modelling should be directed to elucidate key information to optimize the process.

09 BIOMASS FUELS↗

Production of H2 at Fast Rates Using a Nickel Electrocatalyst in Water/Acetonitrile Solutions

Efficient production of molecular hydrogen for storage of energy from renewable sources is crucial for the development of wind and solar power. Hydrogenase enzymes in nature catalyze H2 production using earth-abundant metals (iron and nickel) using precise delivery of protons to the metal center. Here we report a synthetic nickel complex containing proton relays, [Ni(PPh2NC6H4OH2)2](BF4)2 (PPh2NC6H4OH2 = 1,5-bis(p-hydroxyphenyl)-3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane), that catalyzes the production of H2 in an aqueous environment with turnover frequencies of 750-170,000 s-1 at directly measured overpotentials of 310-470 mV. The remarkable performance of this catalyst in aqueous environments exceeds the requirements necessary for molecular catalytic production of H2 by energy derived from photovoltaic solar cells. This research was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences. Pacific Northwest National Laboratory is operated by Battelle for the U.S. Department of Energy.

Hoffert, Wesley A.↗

Using multiple secondary fusion products to evaluate fuel ρR, electron temperature, and mix in deuterium-filled implosions at the NIF

In deuterium-filled inertial confinement fusion implosions, the secondary fusion processes D( 3 He,p) 4 He and D(T,n) 4 He occur, as the primary fusion products 3 He and T react in flight with thermal deuterons. In implosions with moderate fuel areal density (~ 5–100 mg/cm 2 ), the secondary D- 3 He reaction saturates, while the D-T reaction does not, and the combined information from these secondary products is used to constrain both the areal density and either the plasma electron temperature or changes in the composition due to mix of shell material into the fuel. The underlying theory of this technique is developed and applied to three classes of implosions on the National Ignition Facility: direct-drive exploding pushers, indirect-drive 1-shock and 2-shock implosions,and polar direct-drive implosions. In the 1- and 2-shock implosions, the electron temperature is inferred to be 0.65 x and 0.33 x the burn-averaged ion temperature, respectively. The inferred mixed mass in the polar direct-drive implosions is in agreement with measurements using alternative techniques.

42 ENGINEERING↗

Low charge state heavy ion production with sub-nanosecond laser

We have investigated laser ablation plasma of various species using nanosecond and sub-nanosecond lasers for both high and low charge state ion productions. We found that with sub-nanosecond laser, the generated plasma has a long tail which has low charge state ions determined by an electrostatic ion analyzer even under the laser irradiation condition for highly charged ion production. This can be caused by insufficient laser absorption in plasma plume. This property might be suitable for low charge state ion production. We used a nanosecond laser and a sub-nanosecond laser for low charge state ion production to investigate the difference of generated plasma using the Zirconium target.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

State-to-state mode selectivity in the HD + OH reaction: Perspectives from two product channels

The state-to-state quantum dynamics (J{sub tot} = 0) of the HD + OH(υ{sub 2} = 0, 1) reaction is studied using a reactant coordinate based method, which allows the analysis of both the H + DOH and D + HOH channels with a single propagation. The stretching vibration of the newly formed bond, namely, the OD bond in DOH and one OH bond in HOH, is excited, thanks to its strong coupling with the reaction coordinate at the transition state. On the other hand, the vibrational energy deposited into the OH reactant (υ{sub 2} = 1) is sequestered during the reaction in the spectator OH mode. The combined effect leads to the excitation of both the OD and OH stretching modes in the DOH product, and the dominance of the (002) normal-mode state population in the HOH product, which in the local-mode picture corresponds to the excitation of both OH bonds with one quantum each. The energy flow in this prototypical tetratomic reaction can be understood in terms of the sudden vector projection model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CONSTRAINING JET PRODUCTION SCENARIOS BY STUDIES OF NARROW-LINE RADIO GALAXIES

We study a large sample of narrow-line radio galaxies (NLRGs) with extended radio structures. Using 1.4 GHz radio luminosities L {sub 1.4}, narrow optical emission line luminosities L {sub [OIII]} and L{sub H{sub {alpha}}}, as well as black hole masses M {sub BH} derived from stellar velocity dispersions measured from the optical spectra obtained with the Sloan Digital Sky Survey, we find that (1) NLRGs cover about four decades of the Eddington ratio, {lambda} {identical_to} L {sub bol}/L {sub Edd}{proportional_to}L {sub line}/M {sub BH}; (2) L {sub 1.4}/M {sub BH} strongly correlates with {lambda}; and (3) radio loudness, R{identical_to}L{sub 1.4}/L{sub line}, strongly anti-correlates with {lambda}. A very broad range of the Eddington ratio indicates that the parent population of NLRGs includes both radio-loud quasars (RLQs) and broad-line radio galaxies (BLRGs). The correlations they obey and their high jet production efficiencies favor a jet production model which involves the so-called magnetically choked accretion scenario. In this model, production of the jet is dominated by the Blandford-Znajek mechanism, and the magnetic fields in the vicinity of the central black hole are confined by the ram pressure of the accretion flow. Since large net magnetic flux accumulated in central regions of the accretion flow required by the model can take place only via geometrically thick accretion, we speculate that the massive, 'cold' accretion events associated with luminous emission-line active galactic nucleus can be accompanied by an efficient jet production only if preceded by a hot, very sub-Eddington accretion phase.

79 ASTRONOMY AND ASTROPHYSICS↗