Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Methyl formate oxidation kinetics up to 100 atm

Methyl formate (MF, CH3OCHO), the simplest ester, is a representative oxygenated fuel with high oxygen content, and low sooting tendency. However, its oxidation behavior under high-pressure and intermediate-temperature conditions remains insufficiently understood, especially where low-temperature peroxy radical chemistry, methanol chemistry, and pressure-dependent reaction pathways play a critical role. In this study, MF oxidation experiments were conducted in the Princeton supercritical-pressure jet-stirred reactor (SP-JSR) at 20 and 100 atm over the temperature range of 400–950 K under both fuel-lean and fuel-rich conditions. Based on the experimental results, an updated HP-Mech was developed by incorporating previous MF sub-mechanisms, expanded low-temperature peroxy pathways, and evaluated pressure-dependent decomposition kinetics. The newly updated HP-Mech shows greatly improved performance in predicting the onset temperature, the key intermediate species fractions, methanol formation, and the progression of MF oxidation across all the experimental conditions. Path flux analysis indicates that MF consumption at the onset stage is dominated by H-abstraction at the methyl site, forming CH2OCHO radicals that lead to the formation and isomerization of O2CH2OCHO, driving low-temperature chain propagation. Moreover, H-abstraction at the formate site forms CH3OCO radicals that preferentially decompose to CH3, initiating the methanol formation pathway linked to CH3O2 and HO2 chemistry. At the same time, HO2 formation is strongly coupled to MF oxidation through multiple MF-derived radical pathways. HCO originates from MF oxidation and acts as a key coupling species linking fuel consumption to HO2 buildup, especially under high-pressure and intermediate-temperature conditions. In addition to this dominant channel, supplementary HO2 formation pathways involving CH3, CH3O, CH2OH, and CH3O2 reacting with O2 further connect methanol chemistry and oxygenated radical chemistry to the HO2 pool, indicating the central role of HO2 in governing MF oxidation. Sensitivity analysis identifies MF with OH/HO2/CH3O2 reactions and the HO2/H2O2/OH sequence as the key factors controlling reactivity in the high-pressure and intermediate-temperature regime. MF directly reacts with OH/HO2/CH3O2 to consume the fuel and produce reactive radicals like CH2OCHO and CH3OCO that undergo subsequent oxidation pathways. Moreover, HO2 recombination suppresses oxidation at lower temperatures, while thermal decomposition of H2O2 accelerates OH production and promotes fuel consumption as temperature increases. The direct formation of active OH from HO2 radicals further completes the mechanism, improving its prediction especially during the oxidation onset stage.

Low-temperature Chemistry↗

Pressure-induced phase transition in La 1 – x Sm x O 0.5 F 0.5 BiS 2

Electrical resistivity measurements on La 1–x Sm x O 0.5 F 0.5 BiS 2 (x = 0.1, 0.3, 0.6, 0.8) have been performed under applied pressures up to 2.6 GPa from 2 K to room temperature. The superconducting transition temperature T c of each sample significantly increases at a Sm-concentration dependent pressure P t , indicating a pressure-induced phase transition from a low-T c to a high-T c phase. At ambient pressure, T c increases dramatically from 2.8 K at x = 0.1 to 5.4 K at x = 0.8; however, the T c values at P > P t decrease slightly with x and P t shifts to higher pressures with Sm substitution. In the normal state, semiconducting-like behavior is suppressed and metallic conduction is induced with increasing pressure in all of the samples. Furthermore, these results suggest that the pressure dependence of T c for the BiS 2 -based superconductors is related to the lattice parameters at ambient pressure and enable us to estimate the evolution of T c for SmO 0.5 F 0.5 BiS 2 under pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles investigation on mechanical, electronic, and thermodynamic properties of Mg{sub 2}Sr under high pressure

The structural, mechanical, electronic, and thermodynamic properties of Mg{sub 2}Sr with C14-type structure under pressures ranging from 0 to 40 GPa have been systematically studied within the framework of density functional theory in this work. The results at zero pressure were in good agreement with the available theoretical and experimental values. The pressure dependence of structure and elastic constants, elastic anisotropy, Cauchy pressure, melting points, and hardness was successfully calculated and discussed. In addition, the electronic density of states (DOSs) under various pressures were investigated. Debye temperature and the dependences of thermodynamic properties on temperature and pressure were also discussed in the present paper.

36 MATERIALS SCIENCE↗

High Pressure/Temperature Metal Silicate Partitioning of Tungsten

The behavior of chemical elements during metal/silicate segregation and their resulting distribution in Earth's mantle and core provide insight into core formation processes. Experimental determination of partition coefficients allows calculations of element distributions that can be compared to accepted values of element abundances in the silicate (mantle) and metallic (core) portions of the Earth. Tungsten (W) is a moderately siderophile element and thus preferentially partitions into metal versus silicate under many planetary conditions. The partitioning behavior has been shown to vary with temperature, silicate composition, oxygen fugacity, and pressure. Most of the previous work on W partitioning has been conducted at 1-bar conditions or at relatively low pressures, i.e. <10 GPa, and in two cases at or near 20 GPa. According to those data, the stronger influences on the distribution coefficient of W are temperature, composition, and oxygen fugacity with a relatively slight influence in pressure. Predictions based on extrapolation of existing data and parameterizations suggest an increased pressured dependence on metal/ silicate partitioning of W at higher pressures 5. However, the dependence on pressure is not as well constrained as T, fO2, and silicate composition. This poses a problem because proposed equilibration pressures for core formation range from 27 to 50 GPa, falling well outside the experimental range, therefore requiring exptrapolation of a parametereized model. Higher pressure data are needed to improve our understanding of W partitioning at these more extreme conditions.

Shofner, G. A.↗

An efficient method for unfolding kinetic pressure driven VISAR data

Velocity Interferometer System for Any Reflector (VISAR) [Barker and Hollenbach, J. Appl. Phys. 43, 4669 (1972)] is a well-known diagnostic that is employed on many shock physics and pulsed-power experiments. With the VISAR diagnostic, the velocity on the surface of any metal flyer can be found. For most experiments employing VISAR, either a kinetic pressure [Grady, Mech. Mater. 29, 181 (1998)] or a magnetic pressure [Lemke et al., Intl J. Impact Eng. 38, 480 (2011)] drives the motion of the flyer. Moreover, reliable prediction of the time-dependent pressure is often a critical component to understanding the physics of these experiments. Although VISAR can provide a precise measurement of a flyer’s surface velocity, the real challenge of this diagnostic implementation is using this velocity to unfold the time-dependent pressure. The purpose of this study is to elucidate a new method for quickly and reliably unfolding VISAR data.

42 ENGINEERING↗

Crystallographic Structure of Ti-6Al-4V, Ti-HP and Ti-CP Under High Pressure

The phase stability of a commercial purity (Ti-CP), high purity (Ti-HP) and Ti-6Al-4V alloy were investigated in a diamond anvil cell up to 32 GPa and 298 K using a polychromatic X-ray beam. The Ti-CP and Ti-HP shown the same HCP (c/a {approx} 0.632) to Hexagonal (c/a {approx} 1.63) non reversible martensitic transition at about 9 GPa. The as received Ti-6Al-4V shows a very low relative volume fraction {beta}-Ti/{alpha}-Ti. No phase changes were observed in the Ti-6Al-4V alloy in the pressure range of this study. The {alpha} phase of the Ti-6Al-4V shows monotonic volume cell pressure dependence. This volume change is reversible and non-hysteretic. The cell of the a phase recovered its original volume when the pressure was released.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical evidence for the metallization of Xenon at 132(5) GPa

Xe has been compressed in a diamond-anvil cell to approximately 200 GPa. The metallization of Xe by band-gap closure was investigated by obtaining optical data in both the metallic and insulating states. In the metallic state, the pressure dependence of the plasma frequency was determined from absorption data fitted with a free-electron model. In the insulating state, the pressure dependence of the band gap was determined from absorption data fitted with an indirect-band-gap model. The optical data indicate that the insulator-to-metal transition in Xe occurs at 132(5) GPa.

Goettel, Kenneth A.↗

Sound Velocity and Equation of State of Ballistic Gelatin by Brillouin Scattering

Brillouin scattering spectroscopy with diamond anvil cells was used by measuring the pressure dependence of the sound-relevant polymer material, glass-forming liquid, and H 2 O (water and ice VII) velocities of the material from ambient pressure to 12 GPa at room temperature. Measurements of 20%, 10%, and 4% gelatin solutions were performed. For comparison purposes, we also measured the pressure dependence of the sound velocity of animal tissue up to 10 GPa. We analyzed the Brillouin data using the Tait and Vinet equations of state. We discussed the possible influence of frequency dispersion on bulk modulus at low pressure. We compared the elastic moduli obtained for gelatin to those of several other polymers.

36 MATERIALS SCIENCE↗

Spectroscopic evidence for the Fe3+ spin transition in iron-bearing δ-AlOOH at high pressure

δ-AlOOH has emerged as a promising candidate for water storage in the lower mantle and could have delivered water into the bottom of the mantle. To date, it still remains unclear how the presence of iron affects its elastic, rheological, vibrational, and transport properties, especially across the spin crossover. In this study, we conducted high-pressure X-ray emission spectroscopy experiments on a δ-(Al 0.85 Fe 0.15 ) OOH sample up to 53 GPa using silicone oil as the pressure transmitting medium in a diamond-anvil cell. We also carried out laser Raman measurements on δ-(Al 0.85 Fe 0.15 )OOH and δ-(Al 0.52 Fe 0.48 )OOH up to 57 and 62 GPa, respectively, using neon as the pressure-transmitting medium. Evolution of Raman spectra of δ-(Al 0.85 Fe 0.15 )OOH with pressure shows two new bands at 226 and 632 cm –1 at 6.0 GPa, in agreement with the transition from an ordered ( P 2 1 nm ) to a disordered hydrogen bonding structure ( Pnnm ) for δ-AlOOH. Similarly, the two new Raman bands at 155 and 539 cm –1 appear in δ-(Al 0.52 Fe 0.48 )OOH between 8.5 and 15.8 GPa, indicating that the incorporation of 48 mol% FeOOH could postpone the order-disorder transition upon compression. On the other hand, the satellite peak ( K β') intensity of δ-(Al 0.85 Fe 0.15 )OOH starts to decrease at ~30 GPa and it disappears completely at 42 GPa. That is, δ-(Al 0.85 Fe 0.15 )OOH undergoes a gradual electronic spin-pairing transition at 30–42 GPa. Furthermore, the pressure dependence of Raman shifts of δ-(Al 0.85 Fe 0.15 )OOH discontinuously decreases at 32–37 GPa, suggesting that the improved hydrostaticity by the use of neon pressure medium could lead to a relatively narrow spin crossover. Notably, the pressure dependence of Raman shifts and optical color of δ-(Al 0.52 Fe 0.48 )OOH dramatically change at 41–45 GPa, suggesting that it probably undergoes a relatively sharp spin transition in the neon pressure medium. Together with literature data on the solid solutions between δ-AlOOH and ε-FeOOH, we found that the onset pressure of the spin transition in δ-(Al,Fe)OOH increases with increasing FeOOH content. These results shed new insights into the effects of iron on the structural evolution and vibrational properties of δ-AlOOH. The presence of FeOOH in δ-AlOOH can substantially influence its high-pressure behavior and stability at the deep mantle conditions and play an important role in the deep-water cycle

58 GEOSCIENCES↗

Pressure-temperature phase diagram of CaK ( Fe 1 – x Mn x ) 4 As 4 ( x = 0.024 )

Resistance measurements on single crystals of CaK(Fe 1–x Mn x ) 4 As 4 (x = 0.024) were performed under hydrostatic pressure up to 5.15 GPa. The pressure dependence of the magnetic and superconducting transition temperatures and that of the superconducting upper critical field are reported. Furthermore, our results show that upon increasing pressure, the magnetic transition temperature T N is suppressed, whereas the superconducting transition temperature T c first increases and then decreases, exhibiting a maximum at a pressure p c corresponding to the intersection of the T N (p) and T c (p) lines. In addition, a minimum in the normalized slope of the superconducting upper critical field as well as a change in the pressure dependence of the inferred superconducting coherence length are observed at p c , suggesting a difference in the Fermi surface of the paramagnetic and antiferromagnetic states. Finally, CaK(Fe 1–x Mn x ) 4 As 4 (x = 0.024) likely goes through a half-collapsed tetragonal phase transition at ~4.3 GPa, further demonstrating that the half-collapsed tetragonal transition pressure in the CaKFe 4 As 4 system is relatively insensitive to transition metal substitution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Properties of polyamorphous Ce{sub 75}Al{sub 25} metallic glasses

The thermal stability and electronic transport properties of polyamorphous Ce{sub 75}Al{sub 25} metallic glass (MG) have been investigated using in situ high-pressure, high-temperature, energy-dispersive synchrotron x-ray diffraction and in situ high-pressure and low-temperature, four-probe resistance measurements. The results are compared with the properties of La{sub 75}Al{sub 25} MG. The pressure dependence of the crystallization temperature and resistance of the Ce{sub 75}Al{sub 25} MG exhibited turning points at the polyamorphic transition pressure, 1.5 GPa, and they clearly presented different behaviors below and above 1.5 GPa. In contrast, no turning points were observed in the La{sub 75}Al{sub 25} MG (La has no 4f electron). Additionally, the pressure-tuned temperature coefficient of resistance of the Ce{sub 75}Al{sub 25} MG was observed. These results revealed switchable properties in the polyamorphous Ce{sub 75}Al{sub 25} MG that are linked with 4f electron delocalization.

36 MATERIALS SCIENCE↗

Multi-photon UV photolysis of gaseous polycyclic aromatic hydrocarbons: Extinction spectra and dynamics

The extinction spectra of static naphthalene and static biphenylene vapor, each buffered with a noble gas at room temperature, were measured as a function of time in the region between 390 and 850 nm after UV multi-photon laser photolysis at 308 nm. Employing incoherent broadband cavity enhanced absorption spectroscopy (IBBCEAS), the spectra were found to be unstructured with a general lack of isolated features suggesting that the extinction was not solely based on absorption but was in fact dominated by scattering from particles formed in the photolysis of the respective polycyclic aromatic hydrocarbon. Following UV multi-photon photolysis, the extinction dynamics of the static (unstirred) closed gas-phase system exhibits extraordinary quasi-periodic and complex oscillations with periods ranging from seconds to many minutes, persisting for up to several hours. Depending on buffer gas type and pressure, several types of dynamical responses could be generated (classified as types I, II, and III). They were studied as a function of temperature and chamber volume for different experimental conditions and possible explanations for the oscillations are discussed. A conclusive model for the observed phenomena has not been established. However, a number of key hypotheses have made based on the measurements in this publication: (a) Following the multi-photon UV photolysis of naphthalene (or biphenylene), particles are formed on a timescale not observable using IBBCEAS. (b) The observed temporal behavior cannot be described on basis of a chemical reaction scheme alone. (c) The pressure dependence of the system's responses is due to transport phenomena of particles in the chamber. (d) The size distribution and the refractive indices of particles are time dependent and evolve on a timescale of minutes to hours. The rate of particle coagulation, involving coalescent growth and particle agglomeration, affects the observed oscillations. (e) The walls of the chamber act as a sink. The wall conditions (which could not be quantitatively characterized) have a profound influence on the dynamics of the system and on its slow return to an equilibrium state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dome of magnetic order inside the nematic phase of sulfur-substituted FeSe under pressure

The pressure dependence of the structural, magnetic, and superconducting transitions and of the superconducting upper critical field were studied in sulfur-substituted Fe ( Se 1 - x S x ) . We performed resistance measurements on single crystals with three substitution levels ( x = 0.043 , 0.096, 0.12) under hydrostatic pressures up to 1.8 GPa and in magnetic fields up to 9 T and were compared to data on pure FeSe. Our results illustrate the effects of chemical and physical pressure on Fe ( Se 1 - x S x ). Furthermore, on increasing sulfur content, magnetic order in the low-pressure range is strongly suppressed to a small domelike region in the phase diagrams. But, T s is much less suppressed by sulfur substitution, and T c of Fe ( Se 1 - x S x ) exhibits similar nonmonotonic pressure dependence with a local maximum and a local minimum present in the low-pressure range for all x . The local maximum in T c coincides with the emergence of the magnetic order above T c . At this pressure the slope of the upper critical field decreases abruptly, which may indicate a Fermi-surface reconstruction. The minimum of T c correlates with a broad maximum of the upper critical field slope normalized by T c .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural distortions in 5-10 nm silver nanoparticles under high pressure

We present experimental evidence that silver nanoparticles in the size range of 5-10 nm undergo a reversible structural transformation under hydrostatic pressures up to 10 GPa. We have used x-ray diffraction with a synchrotron light source to investigate pressure-dependent and size-dependent trends in the crystal structure of silver nanoparticles in a hydrostatic medium compressed in a diamond-anvil cell. Results suggest a reversible linear pressure-dependent rhombohedral distortion which has not been previously observed in bulk silver. We propose a mechanism for this transition that considers the bond-length distribution in idealized multiply twinned icosahedral particles. To further support this hypothesis, we also show that similar measurements of single-crystal platinum nanoparticles reveal no such distortions.

36 MATERIALS SCIENCE↗

A non-isothermal breakage-damage model for plastic-bonded granular materials incorporating temperature, pressure, and rate dependencies

Plastic-bonded granular materials (PBM) are widely used in industrial sectors, including building construction, abrasive applications, and defense applications such as plastic-bonded explosives. The mechanical behavior of PBM is highly nonlinear, irreversible, rate dependent, and temperature sensitive governed by various micromechanical attributions such as grain crushing and binder damage. This paper presents a thermodynamically consistent, microstructure-informed constitutive model to capture these characteristic behaviors of PBM. Key features of the model include a breakage internal variable to upscale the grain-scale information to the continuum level and to predict grain size evolution under mechanical loading. In addition, a damage internal state variable is introduced to account for the damage, deterioration, and debonding of the binder matrix upon loading. Temperature is taken as a fundamental external state variable to handle non-isothermal loading paths. The proposed model is able to capture with good accuracy several important aspects of the mechanical properties of PBM, such as pressure-dependent elasticity, pressure-dependent yield strength, brittle-to-ductile transition, temperature dependency, and rate dependency in the post-yielding regime. Furthermore, the model is validated against multiple published datasets obtained from confined and unconfined compression tests, covering various PBM compositions, confining pressures, temperatures, and strain rates.

Breakage↗

An apparatus for studying scintillator properties at high isostatic pressures

We describe the design and operation of a unique hydraulic press for the study of scintillator materials under isostatic pressure. This press, capable of developing a pressure of a gigapascal, consists of a large sample chamber pressurized by a two-stage hydraulic amplifier. The optical detection of the scintillation light emitted by the sample is performed, through a large aperture optical port, by a photodetector located outside the pressure vessel. In addition to providing essential pressure-dependent studies on the emission characteristics of radioluminescent materials, this apparatus is being developed to elucidate the mechanisms behind the recently observed dependency of light-yield nonproportionality on electronic band structure. The variation of the light output of a Tl:CsI crystal under 511-keV gamma excitation and hydrostatic pressure is given as an example.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Raman spectroscopic study of cyclopentane at high pressure

The behavior of cyclopentane with pressure has been investigated to 21.5 GPa using Raman spectroscopy. Various phases were observed with pressure which included liquid, two plastic, and one true crystalline phases of cyclopentane during compression and decompression sequences. Optimized molecular structure and Raman and IR vibrational spectra of the most stable puckered-ring conformation of the cyclopentane molecule were also computed using density functional theory methods. The theoretically calculated values as well as the experimentally determined pressure dependencies of spectral bands are in very good agreement with the low temperature measurements and previous mode assignments. The phase diagram of cyclopentane was analyzed with respect to pressure-induced alterations in Raman spectra across the phase boundaries. The various forms of 'frozen-in' conformations in phase III are suggested to explain previous results related to existence of a 'new' phase between plastic crystalline phase II and monoclinic phase III in solid cyclopentane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large Intermediates in Hydrazine Decomposition: A Theoretical Study of the N 3 H 5 and N 4 H 6 Potential Energy Surfaces

Large complex formation involved in the thermal decomposition of hydrazine (N 2 H 4 ) is studied here using transition state theory based theoretical kinetics. A comprehensive analysis of the N 3 H 5 and N 4 H 6 potential energy surfaces was performed at the CCSD(T)-F12a/aug-cc-pVTZ//ωB97x-D3/6-311++G(3df,3pd) level of theory, and pressure-dependent rate coefficients were determined. There are no low-barrier unimolecular decomposition pathways for triazane (n-N 3 H 5 ), and its formation becomes more significant as the pressure increases; it is the primary product of N 2 H 3 + NH 2 below 550, 800, 1150, and 1600 K at 0.1, 1, 10, and 100 bar, respectively. The N 4 H 6 surface has two important entry channels, N 2 H 4 + H 2 NN and N 2 H 3 + N 2 H 3 , each with different primary products. Interestingly, N 2 H 4 + H 2 NN primarily form N 2 H 3 + N 2 H 3 , while disproportionation of N 2 H 3 + N 3 H 3 predominantly leads to the other N 2 H 2 isomer, HNNH. Stabilized tetrazane (n-N 4 H 6 ) formation from N 2 H 3 + N 2 H 3 becomes significant only at relatively high pressures and low temperatures due to fall-off back into N 2 H 3 + N 2 H 3 . Pressure-dependent rate coefficients for all considered reactions as well as thermodynamic properties of triazane and tetrazane, which should be considered for kinetic modeling of chemical processes involving nitrogen- and hydrogen-containing species, are reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗