Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA CONDUCTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

A transverse Kelvin-Helmholtz instability in a magnetized plasma

An analysis is conducted of the transverse Kelvin-Helmholtz instability in a magnetized plasma for unstable flute modes. The analysis makes use of a two-fluid model. Details regarding the instability calculation are discussed, taking into account the ion continuity and momentum equations, the solution of a zero-order and a first-order component, and the properties of the solution. It is expected that the linear calculation conducted will apply to situations in which the plasma has experienced no more than a few growth periods.

Kintner, P.↗

Understanding helicon plasmas

This paper presents a comprehensive overview of work on the helicon plasmas and also discusses various aspects of RF power deposition in such plasmas. Some of the work presented here is a review of earlier work on theoretical [A. Ganguli et al., Phys. Plasmas 14, 113503 (2007)] and experimental [A. Ganguli et al., Plasma Sources Sci. Technol. 20(1), 015021 (2011)] investigations on helicon plasmas in a conducting cylindrical waveguide for m = -1 mode. This work also presents an approach to investigate the mechanisms by which the helicon and associated Trivelpiece-Gould (TG) waves are responsible for RF power deposition in Helicon discharges. Experiment design adopts the recent theory of damping and absorption of Helicon modes in conducting waveguides [A. Ganguli et al., Phys. Plasmas 14, 113503 (2007)]. The effort has also been made to detect the warm electrons, which are necessary for ionization, because Helicon discharges are of high density, low T{sub e} discharges and the tail of the bulk electron population may not have sufficient high-energy electrons. Experimental set up also comprises of the mirror magnetic field. Measurements using RF compensated Langmuir probes [A. Ganguli et al., Plasma Sources Sci. Technol. 17, 015003 (2008)], B-dot probe and computations based on the theory shows that the warm electrons at low pressure (0.2-0.3 mTorr) Helicon discharges, are because of the Landau damping of TG waves. In collisional environment, at a pressure Almost-Equal-To 10 mTorr, these high-energy electrons are due to the acceleration of bulk electrons from the neighboring regions across steep potential gradients possibly by the formation of double layers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The influence of boundary and edge-plasma modeling in computations of axisymmetric vertical displacement

A number of previously published studies apply extended-MHD computations to model macroscopic dynamics of tokamak vertical displacement events (VDEs). The characteristic plasma-wall contact and resistive-wall diffusion imply sensitivity to boundary conditions in a general sense, but which conditions have significant influence depends on how the plasma is modeled. This work examines these dependencies by comparing results of axisymmetric extended-MHD computations with different sets of boundary conditions, plasma thermal-conduction models, and wall resistivity values. The geometry and plasma parameters of the computations represent a modest-sized tokamak. The forced-displacement scenario and computational setup are similar to those used in previous 3D computations. The results show that for a given wall resistivity, the VDE time-scale is most sensitive to variations in the boundary and thermal-conduction parameters that affect electron thermal transport. The electrical conductivity depends on electron temperature, and the dependence on thermal transport stems from its influence on the electrical circuit that includes the open-field halo current. Lastly, conditions that lead to hotter, broader halo regions slow the evolution. Significant sensitivity to the boundary condition on plasma flow-velocity exists when electron thermal conduction is restricted and electron energy loss is convective, which is expected for conditions at the entrance of the magnetic presheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First experiments probing the collision of parallel magnetic fields using laser-produced plasmas

Novel experiments to study the strongly-driven collision of parallel magnetic fields in β ∼ 10, laser-produced plasmas have been conducted using monoenergetic proton radiography. These experiments were designed to probe the process of magnetic flux pileup, which has been identified in prior laser-plasma experiments as a key physical mechanism in the reconnection of anti-parallel magnetic fields when the reconnection inflow is dominated by strong plasma flows. In the present experiments using colliding plasmas carrying parallel magnetic fields, the magnetic flux is found to be conserved and slightly compressed in the collision region. Two-dimensional (2D) particle-in-cell simulations predict a stronger flux compression and amplification of the magnetic field strength, and this discrepancy is attributed to the three-dimensional (3D) collision geometry. Future experiments may drive a stronger collision and further explore flux pileup in the context of the strongly-driven interaction of magnetic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrical conductivity and velocity of highly ionized plasma flows - Theory and experiment.

Use of an immersible, three-coil, magnetic-induction probe, previously tested in a low-density supersonic argon jet, to measure electrical conductivity and velocity profiles of a highly ionized high-density nitrogen jet in the continuum flow regime where effects due to probe bow shocks and boundary layers might not be negligible. Measured centerline values of electrical conductivity and velocity were compared with predictions based on a theoretical analysis previously developed to study the gas as it expanded adiabatically and inviscidly from an equilibrium sonic state to the nozzle exit. The resulting numerical exit plane values for electron density and electron temperature were then substituted into the Spitzer-Haerm conductivity formula to compute a theoretical conductivity which agreed within 40% of the measured conductivity, while the calculated and experimental velocity values differed by as much as 50%. The lack of agreement was attributed to the possible use of invalid assumptions and boundary conditions in the computer analysis or to the unknown effects of shocks on the probe data.

Vendell, E. W.↗

Particle Production in Strong Electromagnetic Fields in Relativistic Heavy-Ion Collisions

I review the origin and properties of electromagnetic fields produced in heavy-ion collisions. The field strength immediately after a collision is proportional to the collision energy and reaches ~ m π 2 at RHIC and ~ 10 m π 2 at LHC. I demonstrate by explicit analytical calculation that after dropping by about one-two orders of magnitude during the first fm/c of plasma expansion, it freezes out and lasts for as long as quark-gluon plasma lives as a consequence of finite electrical conductivity of the plasma. Magnetic field breaks spherical symmetry in the direction perpendicular to the reaction plane, and therefore all kinetic coefficients are anisotropic. I examine viscosity of QGP and show that magnetic field induces azimuthal anisotropy on plasma flow even in spherically symmetric geometry. Very strong electromagnetic field has an important impact on particle production. I discuss the problem of energy loss and polarization of fast fermions due to synchrotron radiation, consider photon decay induced by magnetic field, elucidate J / ψ dissociation via Lorentz ionization mechanism, and examine electromagnetic radiation by plasma. I conclude that all processes in QGP are affected by strong electromagnetic field and call for experimental investigation.

Tuchin, Kirill↗

A magnetohydrodynamical model of the inner coma of Comet Halley

The magnetometer onboard the Giotto spacecraft observed a diamagnetic cavity surrounding the nucleus of Comet Halley. The location of the boundary of this diamagnetic cavity is determined by a balance between an inward magnetic pressure gradient force and an outward ion-neutral drag force, associated with collisions between the outwardly flowing neutrals and the stagnated ions. A one-dimensional time-dependent MHD model has been developed for the inner coma of Comet Halley, and includes ion-neutral collisions, photochemical production and loss of plasma, and finite conductivity. This model is used to investigate the plasma dynamics in the vicinity of the diamagnetic cavity boundary surface. A narrow transition layer with enhanced plasma density is shown to exist just inside the boundary, although a full understanding of this layer will require a two- or three-dimensional MHD model. The flux of cometary ions into this shocklike layer is removed by electron-ion recombination. The thickness of this layer is determined by the Mach number of the incident flow.

Cravens, T. E.↗

The effect of saturated thermal conduction on clouds in a hot plasma

We numerically investigate the internal evolution of multiphase clouds, which are at rest with respect to an ambient, highly ionized medium (HIM) representing the hot component of the circumgalactic medium. Time-dependent saturated thermal conduction and its implications like condensation rates and mixing efficiency are assessed in multiphase clouds. Our simulations are carried out by using the adaptive mesh refinement code FLASH. The model clouds are initially in both hydrostatic and thermal equilibrium and are in pressure balance with the HIM. Thus, they have steep gradients in both temperature and density at the interface to HIM leading to non-negligible thermal conduction. Several physical processes are considered numerically or semi-analytically: thermal conduction, radiative cooling and external heating of gas, self-gravity, mass diffusion, and dissociation of molecules and ionization of atoms. It turns out that saturated thermal conduction triggers a continuous condensation irrespective of cloud mass. Dynamical interactions with ambient HIM all relate to the radial density gradient in the clouds: (1) mass flux due to condensation is the higher the more homogeneous the clouds are; (2) mixing of condensed gas with cloud gas is easier in low-mass clouds, because of their shallower radial density gradient; and thus (3) accreted gas is distributed more efficiently. A distinct and sub-structured transition zone forms at the interface between cloud and HIM, which starts at smaller radii and is much narrower as deduced from analytical theory.

79 ASTRONOMY AND ASTROPHYSICS↗

Zn-doped CuAlS{sub 2} transparent p-type conductive thin films deposited by pulsed plasma deposition

CuAl{sub 0.90}Zn{sub 0.10}S{sub 2} thin films were deposited by pulsed plasma deposition. The dependence of structural, surface morphology, electrical, and optical properties of the films on substrate temperature was investigated. X-ray diffraction patterns reveal that the film be amorphous structure. The electrical properties are sensitive to the substrate temperature. A typical sample with conductivity of 50.9 S cm{sup -1}, carrier mobility of 3.13 cm{sup 2} V{sup -1} s{sup -1}, carrier concentration of 1.41x10{sup 19} cm{sup -3}, and average transmission of 74% in visible range of 400-700 nm was obtained. A transparent p-CuAlS{sub 2}:Zn/n-In{sub 2}O{sub 3}:W heterogeneous diode was also fabricated and exhibits rectifying current-voltage characteristics. The ratio of forward current to the reverse current exceeds 80 within the range of applied voltages of -3.0-+3.0 V and the turn-on voltage is approximately 0.5-0.8 V.

36 MATERIALS SCIENCE↗

Resonant features of energy and particle transport during application of resonant magnetic perturbation fields at TEXTOR and DIII-D

In this paper, results of a direct comparison of TEXTOR and DIII-D experiments with resonant magnetic perturbation (RMP) fields are presented. This comparison of resistive L-mode plasmas at TEXTOR with highly conductive H-mode plasmas at DIII-D is useful to identify generic physics mechanisms during application of RMP fields with a strong field line pitch angle alignment in the plasma edge. A reduction in the pedestal electron pressure p(e) with increasing extension of the vacuum modelled stochastic layer and p(e) recovery with decreasing layer width is found caused by a q(95) resonant reduction in the edge (0.8 < Psi(N) < 0.95) electron temperature T-e(q(95)) on both devices. For RMP edge-localized mode (ELM) suppressed H-mode plasmas at DIII-D, the gradients del T-e and nominal values of T-e are reduced in this edge region while increasing in the pedestal (0.95 < Psi(N) < 1.0) with RMP field applied and both are highly dependent on q(95). In contrast, an increase in the central ion temperature with strong steepening of the ion temperature profile at mid-radius is found-again being highly dependent on q(95). However, these resonant thermal transport effects are only seen in high triangularity plasmas revealing a strong shape dependence of the thermal transport. In contrast to the highly q(95) dependent thermal transport features, the reduction of n(e)-known as density pump out-shows a much weaker dependence on q(95). We show the potential to reduce the RMP induced particle pump out by fine tuning of the RMP spectral properties. At low resonant field amplitudes enhanced particle confinement is seen in high-field side limited L-mode discharges on both devices while higher resonant field amplitudes yield particle pumps out.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

TROPIX plasma interactions group report

The purpose is to summarize the spacecraft charging analysis conducted by the plasma interactions group during the period from April 1993 to July 1993, on the proposed TROPIX spacecraft, and to make design recommendations which will limit the detrimental effects introduced by spacecraft charging. The recommendations were presented to the TROPIX study team at a Technical Review meeting held on 15 July 1993.

Herr, Joel L.↗

STRIPPED ELLIPTICAL GALAXIES AS PROBES OF ICM PHYSICS. I. TAILS, WAKES, AND FLOW PATTERNS IN AND AROUND STRIPPED ELLIPTICALS

Elliptical cluster galaxies are progressively stripped of their atmospheres due to their motion through the intracluster medium (ICM). Deep X-ray observations reveal the fine-structure of the galaxy’s remnant atmosphere and its gas tail and wake. This fine-structure depends on dynamic conditions (galaxy potential, initial gas contents, orbit through the host cluster), orbital stage (early infall, pre-/post-pericenter passage), and ICM plasma properties (thermal conductivity, viscosity, magnetic field structure). We aim to disentangle dynamic and plasma effects in order to use stripped ellipticals as probes of ICM plasma properties. This first paper of a series investigates the hydrodynamics of progressive gas stripping by means of inviscid hydrodynamical simulations. We distinguish a long-lasting initial relaxation phase and a quasi-steady stripping phase. During quasi-steady stripping, the ICM flow around the remnant atmosphere resembles the flow around solid bodies, including a “deadwater” region in the near wake. Gas is stripped from the remnant atmosphere predominantly at its sides via Kelvin–Helmholtz instabilities. The downstream atmosphere is largely shielded from the ICM wind and thus shaped into a tail. Observationally, both this “remnant tail” and the stripped gas in the wake can appear as a “tail”, but only in the wake can galactic gas mix with the ambient ICM. While the qualitative results are generic, the simulations presented here are tailored to the Virgo elliptical galaxy M89 (NGC 4552) for the most direct comparison to observations. Papers II and III of this series describe the effect of viscosity and compare to Chandra and XMM-Newton observations, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

Robe Development for Electrical Conductivity Analysis in an Electron Gun Produced Helium Plasma

The use of magnetohydrodynamic (MHD) power conversion systems, potentially coupled with a fission power source, is currently being investigated as a driver for an advanced propulsion system, such as a plasma thruster. The efficiency of a MHD generator is strongly dependent on the electrical conductivity of the fluid that passes through the generator; power density increases as fluid conductivity increases. Although traditional MHD flows depend on thermal ionization to enhance the electrical conductivity, ionization due to nuclear interactions may achieve a comparable or improved conductivity enhancement while avoiding many of the limitations inherent to thermal ionization. Calculations suggest that nuclear-enhanced electrical conductivity increases as the neutron flux increases; conductivity of pure He-3 greater than 10 mho/m may be achievable if exposed to a flux greater than 10(exp 12) neutrons/cm2/s.) However, this remains to be demonstrated experimentally. An experimental facility has been constructed at the Propulsion Research Center at the NASA Marshall Space Flight Center, using helium as the test fluid. High energy electrons will be used to simulate the effects of neutron-induced ionization of helium gas to produce a plasma. These experiments will be focused on diagnosis of the plasma in a virtually static system; results will be applied to future tests with a MHD system. Initial experiments will utilize a 50 keV electron gun that can operate at up to a current of 200 micro A. Spreading the electron beam over a four inch diameter window results in an electron flux of 1.5x 10(exp 13) e/sq cm/s. The equivalent neutron flux that would produce the same ionization fraction in helium is 1x10(exp 12) n/sq cm/s. Experiments will simulate the neutron generated plasma modeled by Bitteker, which takes into account the products of thermal neutron absorption in He-3, and includes various ion species in estimating the conductivity of the resulting plasma. Several different probes will be designed and implemented to verify the plasma kinetics model. System parameters and estimated operating ranges are summarized. The predicted ionization fraction, electron density, and conductivity levels are provided in for an equivalent neutron flux of 1x10(exp 12) n/cm2/s. Understanding the complex plasma kinetics throughout a MHD channel is necessary to design an optimal power conversion system for space propulsion applications. The proposed experiments seek to fully characterize the helium plasma and to determine the reliability of each measurement technique, such that they may be applied to more advanced MHD studies. The expected value of each plasma parameter determined from theoretical models will be verified experimentally by several independent techniques to determine the most reliable method of obtaining each parameter. The results of these experiments will be presented in the final paper.

Bragg-Sitton, Shannon M.↗

A possible magnetic wake of Titan - Pioneer 11 observations

The paper deals with measurements of the magnetic field along the outbound leg of Pioneer's trajectory at Saturn, which suggest that the spacecraft may have passed through the magnetic wake of Titan at a distance of 145 Titan radii downstream from Titan. The data obtained over a period of several hours around the crossing of Titan's L shell exhibit a number of characteristics which are qualitatively consistent with predictions based on theories of the interaction between a supersonic magnetized plasma and a conducting or magnetized planetary body. In addition, values of the plasma mass density derived from the interaction geometry are consistent with an upper limit inferred from in situ plasma measurements obtained during the outbound leg of Pioneer's trajectory.

Jones, D. E.↗

Optical emission spectroscopy and imaging of low-pressure N2 plasmas generated by intense fast-pulsed electron beams

An optical emission spectroscopic (OES) and imaging characterization is conducted on N2 plasmas generated by a 100 keV fast-pulsed electron beam. The electron beams are injected into an N2 gas filled volume with a current of 4.5 kA (300 A/cm2) and a 100 ns pulse width. The characterization is conducted at the pressures, 1 Torr and 0.1 Torr, corresponding to two distinct regimes that exhibit significantly different plasma dynamics. Beam impact ionization is shown to be a primary mechanism for producing low temperature plasmas at 1 Torr during beam output. After beam termination, ionization by an inductive electric field becomes the primary mechanism for plasma formation later in time for both pressures. OES and plasma imaging are used in this work as a diagnostic tool to track the distribution of electronic, vibrational, and rotational state transitions and ionized species. This is achieved with the use of a multi-resolution suite of spectrometers capable of acquiring time-resolved spectra. Vibrational and rotational bands of the N2 second positive system (C3Πu→B3Πg) and the N2+ first negative system (B2Σu+→X2Σg+) are identified in both regimes as well as N+ states exclusively in the lower pressure regime. Vibrational and rotational spectra are shown to track the evolution of the time-varying plasma current. Plasma imaging also reveals spatially nonuniform plasma emission at 0.1 Torr. A few hundred shots are recorded to fully characterize the emissions, and results are shown to be highly reproducible (≤±1% with 2σ confidence).

Kaiser, E. R. (ORCID:0000000336493938)↗

The effect of finite Larmor radius corrections on Jeans instability of quantum plasma

The influence of finite Larmor radius (FLR) effects on the Jeans instability of infinitely conducting homogeneous quantum plasma is investigated. The quantum magnetohydrodynamic (QMHD) model is used to formulate the problem. The contribution of FLR is incorporated to the QMHD set of equations in the present analysis. The general dispersion relation is obtained analytically using the normal mode analysis technique which is modified due to the contribution of FLR corrections. From general dispersion relation, the condition of instability is obtained and it is found that Jeans condition is modified due to quantum effect. The general dispersion relation is reduced for both transverse and longitudinal mode of propagations. The condition of gravitational instability is modified due to the presence of both FLR and quantum corrections in the transverse mode of propagation. In longitudinal case, it is found to be unaffected by the FLR effects but modified due to the quantum corrections. The growth rate of Jeans instability is discussed numerically for various values of quantum and FLR corrections of the medium. It is found that the quantum parameter and FLR effects have stabilizing influence on the growth rate of instability of the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗