Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARTIAL PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

International Space Station (ISS) Gas Logistics Planning in the Post Shuttle Era

Over its life the International Space Station (ISS) has received gas (nitrogen, oxygen, and air) from various sources. Nitrogen and oxygen are used in the cabin to maintain total pressure and oxygen partial pressures within the cabin. Plumbed nitrogen is also required to support on-board experiments and medical equipment. Additionally, plumbed oxygen is required to support medical equipment as well as emergency masks and most importantly EVA support. Gas are supplied to ISS with various methods and vehicles. Vehicles like the Progress and ATV deliver nitrogen (both as a pure gas and as air) and oxygen via direct releases into the cabin. An additional source of nitrogen and oxygen is via tanks on the ISS Airlock. The Airlock nitrogen and oxygen tanks can deliver to various users via pressurized systems that run throughout the ISS except for the Russian segment. Metabolic oxygen is mainly supplied via cabin release from the Elektron and Oxygen Generator Assembly (OGA), which are water electrolyzers. As a backup system, oxygen candles (Solid Fuel Oxygen Generators-SFOGs) supply oxygen to the cabin as well. In the past, a major source of nitrogen and oxygen has come from the Shuttle via both direct delivery to the cabin as well as to recharge the ISS Airlock tanks. To replace the Shuttle capability to recharge the ISS Airlock tanks, a new system was developed called Nitrogen/Oxygen Recharge System (NORS). NIORS consists of high pressure (7000 psi) tanks which recharge the ISS Airlock tanks via a blowdown fill for both nitrogen and oxygen. NORS tanks can be brought up on most logistics vehicles such as the HTV, COTS, and ATV. A proper balance must be maintained to insure sufficient gas resources are available on-orbit so that all users have the required gases via the proper delivery method (cabin and/or plumbed).

Leonard, Daniel J.↗

High quality large scale single and multilayer graphene production by chemical vapor deposition

Systems and methods for synthesizing continuous graphene sheets are provided. The systems and methods include passing a catalyst substrate through a heated chemical vapor deposition chamber and exposing the substrate to a reaction gas mixture of hydrogen and hydrocarbon at a preselected location within the chamber. The reaction gas mixture can include hydrogen having a partial pressure of between about 0 Torr and 20 Torr, hydrocarbon having a partial pressure of between about 20 mTorr and about 10 Torr, and one or more buffer gases. The buffer gases can include argon or other noble gases to maintain atmospheric pressure within the chemical deposition chamber. The resulting graphene can be made with continuous mono and multilayers (up to six layers) and have single crystalline hexagonal grains with a preselected nucleation density and domain size for a range of applications.

Vlassiouk, Ivan V.↗

Thermal conductivity of ZnO thin film produced by reactive sputtering

ZnO thin films have been produced by reactive sputtering with different oxygen contents in the sputtering gas. As a result of transmission electronic microscopy observation, each film consist of two layers: an interfacial layer close to the substrate, with a thickness of about 200 nm, composed of very fine crystal grains and an upper layer above the interfacial layer, composed of column-shaped grains aligned along the out-plane direction. The grain diameter ranges from 35 to 100 nm depending on the oxygen partial pressure. The in-plane and out-plane thermal conductivity have been measured at room temperature. The out-plane thermal conductivity of the interfacial layer is 2.3 W m{sup -1} K{sup -1}, independent on the oxygen partial pressure. The out-plane thermal conductivity of the upper layer is 5.4, 7.1, and 4.0 W m{sup -1} K{sup -1}, and the in-plane thermal conductivity 4.86, 6.01, and 2.66 W m{sup -1} K{sup -1}, for the O{sub 2} 30%, 60%, and 90% ZnO film, respectively. Both out-plane and in-plane thermal conductivity decrease with the decrease of grain diameter. The thermal conductance of grain boundary has been estimated with the phonon diffusion mismatch model, and the intrinsic thermal conductivity within ZnO grains has been calculated with a cylinder-structured composite model. The result shows that the thermal conductivity of the ZnO thin films is dominated by the intrinsic thermal conductivity, which is a function of grain size.

36 MATERIALS SCIENCE↗

A theoretical study of the stability of anionic defects in cubic ZrO 2 at extreme conditions

Using first principles density functional theory calculations, we present a study of the structure, mobility, and the thermodynamic stability of anionic defects in the high-temperature cubic phase of ZrO 2 . Our results suggest that the local structure of an oxygen interstitial depends on the charge state and the cubic symmetry of the anionic sublattice is unstable at 0 K. In addition, the oxygen interstitials and the vacancies exhibit symmetry breaking transitions to low-energy structures with tetragonal distortion of the oxygen sublattice at 0 K. However, the vibrational entropy stabilizes the defect structures with cubic symmetry at 2600–2980 K. The formation free energies of the anionic defects and Gibbs free energy changes associated with different defect reactions are calculated by including the vibrational free energy contributions and the effect of pressure on these defect structures. By analyzing the defect chemistry, we obtain the defect concentrations at finite temperature and pressure conditions using the zero temperature ab initio results as input and find that at low oxygen partial pressures, neutral oxygen vacancies are most dominant and at high oxygen partial pressures, doubly charged anionic defects are dominant. As a result, the relevance of the results to the thermal protective coating capabilities of zirconium-based ceramic composites is elucidated.

36 MATERIALS SCIENCE↗

Tungsten-doped tin oxide thin films prepared by pulsed plasma deposition

Transparent conductive oxide tungsten-doped tin oxide thin films were deposited on glass substrates from ceramic targets by the pulsed plasma deposition method. The structural, electrical and optical properties have been investigated as functions of tungsten doping content and oxygen partial pressure. The lowest resistivity of 2.1 x 10{sup -3} {omega}{center_dot}cm was reproducibly obtained, with carrier mobility of 30 cm{sup 2}V{sup -1}s{sup -1} and carrier concentration of 9.6 x 10{sup 19} cm{sup -3} at the oxygen partial pressure of 1.8 Pa. The average optical transmission was in excess of 80% in the visible region from 400 to 700 nm, with the optical band gap ranging from 3.91 to 4.02 eV.

36 MATERIALS SCIENCE↗

Performance Evaluation of an Oxygen Sensor as a Function of the Samaria Doped Ceria Film Thickness

The current demand in the automobile industry is in the control of air-fuel mixture in the combustion engine of automobiles. Oxygen partial pressure can be used as an input parameter for regulating or controlling systems in order to optimize the combustion process. Our goal is to identify and optimize the material system that would potentially function as the active sensing material for such a device that monitors oxygen partial pressure in these systems. We have used thin film samaria doped ceria (SDC) as the sensing material for the sensor operation, exploiting the fact that at high temperatures, oxygen vacancies generated due to samarium doping act as conducting medium for oxygen ions which hop through the vacancies from one side to the other contributing to an electrical signal. We have recently established that 6 atom % Sm doping in ceria films has optimum conductivity. Based on this observation, we have studied the variation in the overall conductivity of 6 atom % samaria doped ceria thin films as a function of thickness in the range of 50 nm to 300 nm at a fixed bias voltage of 2 volts. A direct proportionality in the increase in the overall conductivity is observed with the increase in sensing film thickness. For a range of oxygen pressure values from 1 mTorr to 100 Torr, a tolerable hysteresis error, good dynamic response and a response time of less than 10 seconds was observed

74 ATOMIC AND MOLECULAR PHYSICS↗

Supraoptimal carbon dioxide effects on growth of soybean [Glycine max (L.) Merr.]

In tightly closed environments used for human life support in space, carbon dioxide (CO2) partial pressures can reach 500 to 1000 Pa, which may be supraoptimal or toxic to plants used for life support. To study this, soybeans [Glycine max (L.) Merr. cvs. McCall and Pixie] were grown for 90 days at 50, 100, 200, and 500 Pa partial pressure CO2 (500, 1000, 2000, and 5000 ppm). Plants were grown using recirculating nutrient film technique with a 12-h photoperiod, a 26 degrees C/20 degrees C thermoperiod, and approximately 300 micromoles m-2 s-1 photosynthetic photon flux (PPF). Seed yield and total biomass were greatest at 100 Pa for cv. McCall, suggesting that higher CO2 levels were supraoptimal. Seed yield and total biomass for cv. Pixie showed little difference between CO2 treatments. Average stomatal conductance of upper canopy leaves at 50 Pa CO2 approximately 500 Pa > 200 Pa > 100 Pa. Total water use over 90 d for both cultivars (combined on one recirculating system) equalled 822 kg water for 100 Pa CO2, 845 kg for 50 Pa, 879 kg for 200 Pa, and 1194 kg for 500 Pa. Water use efficiences for both cultivars combined equalled 3.03 (g biomass kg-1 water) for 100 Pa CO2, 2.54 g kg-1 for 200 Pa, 2.42 g kg-1 for 50 Pa, and 1.91 g kg-1 for 500 Pa. The increased stomatal conductance and stand water use at the highest CO2 level (500 Pa) were unexpected and pose interesting considerations for managing plants in a tightly closed system where CO2 concentrations may reach high levels.

NASA Discipline Life Support Systems↗

Influence of krypton atoms on the structure of hydrogenated amorphous carbon deposited by plasma enhanced chemical vapor deposition

Hydrogenated amorphous carbon (a-C:H) films were prepared by plasma enhanced chemical vapor deposition using methane (CH{sub 4}) plus krypton (Kr) mixed atmosphere. The depositions were performed as function of the bias voltage and krypton partial pressure. The goal of this work was to study the influence of krypton gas on the physical properties of a-C:H films deposited on the cathode electrode. Krypton concentration up to 1.6 at. %, determined by Rutherford Back-Scattering, was obtained at high Kr partial pressure and bias of -120 V. The structure of the films was analyzed by means of optical transmission spectroscopy, multi-wavelength Raman scattering and Fourier Transform Infrared spectroscopy. It was verified that the structure of the films remains unchanged up to a concentration of Kr of about 1.0 at. %. A slight graphitization of the films occurs for higher concentration. The observed variation in the film structure, optical band gap, stress, and hydrogen concentration were associated mainly with the subplantation process of hydrocarbons radicals, rather than the krypton ion energy.

36 MATERIALS SCIENCE↗

Fuel cell serves as oxygen level detector

Monitoring the oxygen level in the air is accomplished by a fuel cell detector whose voltage output is proportional to the partial pressure of oxygen in the sampled gas. The relationship between output voltage and partial pressure of oxygen can be calibrated.

Source record↗

Phase chemistry of the system Nb–Rh–O

Phase relations in the system Nb–Rh–O at 1223 K were investigated by isothermal equilibration of eleven compositions and analysis of quenched samples using OM, XRD, SEM and EDS. The oxide phase in equilibrium with the alloy changes progressively from NbO to NbO₂, NbO₂.₄₂₂ and Nb₂O 5–x with increasing Rh. Only one ternary oxide NbRhO₄ with tetragonal structure (a=0.4708 nm and c=0.3017 nm) was detected. It coexists with Rh and Nb₂O₅. The standard Gibbs energy of formation of NbRhO₄ from its component binary oxides measured using a solid-state electrochemical cell can be represented by the equation; ΔG f,ox o (J/mol)=-38,350+5.818×T(±96) Constructed on the basis of thermodynamic information of the various alloy and oxide phases are oxygen potential diagram for the system Nb–Rh–O at 1223 K and temperature–composition diagrams at constant partial pressures of oxygen. - Graphical abstract: Isothermal section of ternary phase diagram for the system Nb–Rh–O at 1223 K. Highlights: • First complete isothermal section for the system Nb–Rh–O has been established. • An electrochemical cell is used to measure the thermodynamic properties of NbRhO₄. • Oxygen potential diagram at 1223 K is computed from thermodynamic data. • Temperature–composition diagrams at constant oxygen partial pressures. • A complete thermodynamic characterization of the system Nb–Rh–O is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface complexation modeling of U(VI) adsorption by aquifer sediments from a former mill tailings site at Rifle, Colorado

U(VI) adsorption by two aquifer sediment samples was studied under oxic conditions as a function of pH, U(VI), Ca, and dissolved carbonate concentration. Background-A (BKG-A) sediment was collected upstream of a former uranium mill-tailings site at Rifle, Colorado, and Little Rusty Composite (LRC) was collected on site but with low U contamination. Batch adsorption experiments were performed using artificial groundwater solutions prepared to simulate the field groundwater composition in equilibrium with specific partial pressures of carbon dioxide. To encompass the geochemical conditions of the alluvial aquifer at the site, the experimental conditions ranged from 6.8×10-8 to 10-5 M in [U(VI)]tot, 7.2 to 8.0 in pH, 3.0×10-3 to 6.0×10-3 M in [Ca2+], and 0.05 to 2.6% in partial pressure of carbon dioxide. The sediment was extracted with a dilute bicarbonate/carbonate solution to determine the background labile U(VI) already present in the sediment. A semi-empirical surface complexation model was developed to describe U(VI) adsorption using FITEQL4. The non-electrostatic, generalized composite surface complexation model successfully simulated U(VI) adsorption over the range of groundwater conditions at the Old Rifle site, using a two-site, two-reaction fitting scheme. The sensitivity of model parameters to background U(VI) concentration on the two samples was evaluated. U(VI) adsorption experiments were also performed using a sand fraction of BKG-A separated through repeated sonication and wet-sieving. Surface area normalized Kd for the bulk and sand fraction indicated similar reactivity for both. The surface complexation model developed in this work is expected to contribute to the prediction of fate and transport of U(VI) in the alluvial aquifer at the Old Rifle site, and to assist in the simulation of biostimulation field experiments performed at the site.

54 ENVIRONMENTAL SCIENCES↗

CO{sub 2} capture properties of M-C-O-H (M=Li, Na, K) systems: A combined density functional theory and lattice phonon dynamics study

We have computed the phase diagrams for multi-component M-C-O-H (M=Li, Na, K) systems using first-principles density functional theory complemented with lattice phonon calculations. We have identified all CO{sub 2} capture reactions that lie on the Gibbs free energy convex hull as a function of temperature and the partial pressures of CO{sub 2} and H{sub 2}O. Our predicted phase diagrams for CO{sub 2} capture reactions are in qualitative and in some instances quantitative agreement with experimental data. The Na{sub 2}CO{sub 3}/NaHCO{sub 3} and K{sub 2}CO{sub 3}/KHCO{sub 3} systems were found to be the most promising candidates of all those we investigated for both pre- and post-combustion CO{sub 2} capture. Overall, we show that our calculation approach can be used to screen promising materials for CO{sub 2} capture under different conditions of temperature and pressure. -- Graphical abstract: The calculated results indicate that the Na{sub 2}CO{sub 3}/NaHCO{sub 3} and K{sub 2}CO{sub 3}/KHCO{sub 3} systems are the most promising candidates of all those we investigated for both pre-and post-combustion CO{sub 2} capture. Display Omitted Research highlights: > Calculated the phase diagrams for multi-component M-C-O-H (M=Li, Na, K) systems. > Identified all CO{sub 2} capture reactions that lie on the Gibbs free energy convex hull. > Predicted phase diagrams for CO{sub 2} capture reactions are close to experimental data. > The Na{sub 2}CO{sub 3}/NaHCO{sub 3} and K{sub 2}CO{sub 3}/KHCO{sub 3} systems are the most promising candidates. > Our approach can be used to screen promising materials for CO{sub 2} capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic assessment and experimental verification of reactive ion etching of magnetic metal elements

A thermodynamic analysis of etch chemistries for Co, Fe, and Ni using a combination of hydrogen, oxygen, and halogen gases suggested that a single etchant does not work at 300 K; however, a sequential exposure to multiple etchants results in sufficiently high partial pressure of the reaction products for the process to be considered viable. This sequential dose utilized the two reactions, a surface halogenation followed by the secondary etchant exposure. (MX{sub 2} (c) + 3Y →MY(g) + 2XY(g), where M = Co, Fe, Ni; X = F, Cl, Br; Y = O, H) The volatilization reaction induced by sequential plasma exposure changed the equilibrium point, increasing the partial pressure of the etch product. Amongst all combinations, Cl{sub 2} or Br{sub 2} plasmas followed by H{sub 2} plasma were the most effective. From both the gas phase diagnostics and surface composition analysis, H{sub 2} plasma alone could not etch metallic Co, Fe, and Ni films but alternating doses of Cl{sub 2} and H{sub 2} plasmas resulted in more effective removal of chlorinated metals and increased the overall etch rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of the U{sub 3}O{sub 8} effect on MOX fuel sintering mechanisms

The manufacturing of uranium-plutonium mixed oxides fuel (also known as MOX) for light water reactor (LWR), starting generally from UO{sub 2} and PuO{sub 2} raw powders and resulting in (U,Pu)O{sub 2} pellets, involves several steps: i) preparation of a UO{sub 2}+PuO{sub 2} master blend with a Pu content of about 25-30 at% by milling and sieving, ii) dilution by mixing the master blend with non-milled UO{sub 2} to reach a Pu content of about 10 at%, iii) pressing and iv) sintering under Ar / 4 % H{sub 2} + H{sub 2}O gas mixture. In this paper, triuranium octoxide (U{sub 3}O{sub 8}) is used as an additional raw powder in the LWR MOX fuel manufacturing. One of the objectives of this work is to understand the sintering behavior of U{sub 3}O{sub 8} under Ar / 4 % H{sub 2} + H{sub 2}O gas mixture and its effect when added to a UO{sub 2}-PuO{sub 2} mixture. A special attention is given on U{sub 3}O{sub 8} reduction, phase transitions, redox reactions and oxygen partial pressure (pO{sub 2}) evolution during shrinkage: the impact of these phenomena on the densification kinetics is discussed, especially the de-densification phenomenon which could occur at high temperature. For that purpose a specific dilatometer, coupled with a zirconia probe implemented at furnace inlet and outlet has been used which allows following continuously and simultaneously the fuel shrinkage and the oxygen partial pressure variation as a function of temperature. The experiments have shown that, contrary to UO{sub 2}, the sintering of milled PuO{sub 2} is accompanied by a de-densification at high temperature. This de-densification phenomenon already occurs with co-milled 71 at% UO{sub 2} + 29 at% PuO{sub 2}, but with a smaller magnitude. When pure milled U{sub 3}O{sub 8} is sintered, no de-densification phenomenon is observed but the low density of the sintered pellet could hide such a phenomenon. The incorporation of U{sub 3}O{sub 8} into a UO{sub 2}-PuO{sub 2} master blend containing 29 at% of plutonium leads to an exacerbation of the de-densification phenomenon with a higher loss on ignition suggesting that U{sub 3}O{sub 8} contributes also to the de-densification phenomenon. This could be due to high temperature reactions involving the initial carbon content of the raw U{sub 3}O{sub 8} powder. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Structural and nanomechanical properties of nanocrystalline carbon thin films for photodetection

This paper reports the effect of helium gas pressure upon the structural, nanomechanical, and photoconductive properties of nanocrystalline carbon thin (NCT) films deposited by the filtered cathodic jet carbon arc technique. High-resolution transmission electron microscopy images confirm the nanocrystalline nature of the deposited films with different crystallite sizes (3–7 nm). The chemical structure of the deposited films is further analyzed by x-ray photoelectron spectroscopy and Raman spectroscopy, which suggest that the deposited films change from graphitelike to diamondlike, increasing in sp{sup 3} content, with a minor change in the dilution of the inert gas (helium). The graphitic character is regained upon higher dilution of the helium gas, whereupon the films exhibit an increase in sp{sup 2} content. The nanomechanical measurements show that the film deposited at a helium partial pressure of 2.2 × 10{sup −4} has the highest value of hardness (37.39 GPa) and elastic modulus (320.50 GPa). At a light intensity of 100 mW/cm{sup 2}, the NCT films deposited at 2.2 × 10{sup −4} and 0.1 mbar partial pressures of helium gas exhibit good photoresponses of 2.2% and 3.6%, respectively.

36 MATERIALS SCIENCE↗

On-line mass spectrometric monitoring of the polymerization of a phenolic-resin-based material

Polymerization of phenolic-resin-based materials requires elevated temperatures. The low thermal conductivity of these materials has led to the use of dielectric heating techniques in lieu of standard convection oven heating to obtain a satisfactory cure. The curing rate and therefore the quality of the cured material depends on the heating rate and maximum temperature attained, parameters which are extremely difficult to measure in dielectric heating units. The dielectric curing of these materials was monitored by using a mass spectrometer to measure the partial pressure of phenol in the gas evolved during polymerization. The resulting plots of phenol partial pressure as a function of time have a characteristic shape, and these may be used to indicate the attainment of complete curing. The validity of the mass spectrometric technique was confirmed by chemical analysis of the polymerized samples.

Aikens, D. A.↗

Lattice defects in semiconducting Hg/1-x/Cd/x/Te alloys. III - Defect structure of undoped Hg0.6Cd0.4Te

Hall effect measurements were carried out on undoped Hg0.6Cd0.4Te crystals quenched to room temperature subsequent to equilibration at temperatures varying from 450 to 720 C under various partial pressures of Hg. The variation of the hole concentration as a function of the partial pressure of Hg indicates that the native acceptor defects are doubly ionized. Native donor defects are found to be negligible in concentration and the p-type to n-type conversion is shown to be due to residual donors and not due to native donor defects. Thermodynamic constant for the incorporation of the doubly ionized native acceptor defect has been established.

Vydyanath, H. R.↗