SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The dataset includes 15-minute average wind speed and direction records from 30 m to 330 m above ground level (AGL) in 10-m range gates. Data were collected by a Scintec MFAS wind profiler installed at the Decker Ranch in Oregon, about 4.4 km southeast of Kent, Ore., and are intended for validating WFIP2 model improvements.
The dataset includes 15-minute average wind speed and direction records from 10 m to 250 m above ground level (AGL) in 5-m range gates. Data were collected by a Scintec SFAS wind profiler installed at the Condon State Airport in Oregon, about 1.8 km northeast of the center of Condon, Ore., and are intended for validating WFIP2 model improvements.
Riparian floodplains represent an interaction zone between the terrestrial subsurface and rivers, where regional groundwater flows, infiltration, and evapotranspiration drive mixing of water and import/export of nutrients and contaminants. These dynamics create seasonally transient redox conditions that drive biogeochemical transformations, which strongly modify groundwater quality. Microbial responses to changing hydrological conditions are perhaps the critical step connecting hydrology to geochemical transformations and groundwater quality, yet are not well understood. We aimed to address this knowledge gap by monitoring seasonal transitions at the U.S. Department of Energy legacy uranium ore processing site in Riverton, WY, through spring-summer-fall hydrological transitions. Our goal was to characterize the microbial community throughout the soil profile, down to the saturated aquifer, and observe its response to wet-dry transitions across a full season and compare to changes in geochemistry and hydrology. Next-generation sequencing was employed to identify biogeochemically-relevant microbial taxa based on the 16S rRNA gene; we found a broad diversity of microbial clades including taxa involved in sulfur and metal cycling, as well as nitrification. These data were paired with measurements of soil moisture, major nutrients and cations, and trace elements. Overall microbial community composition was dependent on soil depth or type, with seasonal effects only observed in the topsoil or subsurface aquifer. This finding indicates that microbial communities in the transiently-reduced center of the soil profile at the Riverton, WY site are remarkably stable, despite moisture and redox inversions. In addition, these communities likely impact the communities in surrounding soil horizons through export of metabolites and solutes as the water table rises and falls throughout the season.
A major goal in pre-detonation nuclear forensics is to infer the processing conditions and/or facility type that produced radiological material. This review paper focuses on analyses of particle size, shape, texture (“morphology”) signatures that could provide information on the provenance of interdicted materials. For example, uranium ore concentrates (UOC or yellowcake) include ammonium diuranate (ADU), ammonium uranyl carbonate (AUC), sodium diuranate (SDU), magnesium diuranate (MDU), and others, each prepared using different salts to precipitate U from solution. Once precipitated, UOCs are often dried and calcined to remove adsorbed water. The products can be allowed to react further, forming uranium oxides UO3, U3O8, or UO2 powders, whose surface morphology can be indicative of precipitation and/or calcination conditions used in their production. This review paper describes statistical issues and approaches in using quantitative analyses of measurements such as particle size and shape to infer production conditions. Statistical topics include multivariate t tests (Hotelling’s T 2 ), design of experiments, and several machine learning (ML) options including decision trees, learning vector quantization neural networks, mixture discriminant analysis, and approximate Bayesian computation (ABC). ABC is emphasized as an attractive option to include the effects of model uncertainty in the selected and fitted forward model used for inferring processing conditions.
The development and deployment of a new generation of nuclear reactors necessitates a thorough evaluation of techniques used to characterize nuclear materials for nuclear forensic applications. Advanced fuels proposed for use in these reactors present both challenges and opportunities for the nuclear forensic field. Many efforts in pre-detonation nuclear forensics are currently focused on the analysis of uranium oxides, uranium ore concentrates, and fuel pellets since these materials have historically been found outside of regulatory control. The increasing use of TRISO particles, metal fuels, molten fuel salts, and novel ceramic fuels will require an expansion of the current nuclear forensic suite of signatures to accommodate the different physical dimensions, chemical compositions, and material properties of these advanced fuel forms. In this work, a semi-quantitative priority scoring system is introduced to identify the order in which the nuclear forensics community should pursue research and development on material signatures for advanced reactor designs. This scoring system was applied to propose the following priority ranking of six major advanced reactor categories: (1) molten salt reactor (MSR), (2) liquid metal-cooled reactor (LMR), (3) very-high-temperature reactor (VHTR), (4) fluoride-salt-cooled high-temperature reactor (FHR), (5) gas-cooled fast reactor (GFR), and (6) supercritical water-cooled reactor (SWCR).
The development of a novel ironmaking technology based on fine iron ore concentrate in a flash reactor is summarized. The design of potential industrial reactors for flash ironmaking based on the computational fluid dynamics technique is described. Overall, this simulation work has shown that the size of the reactor used in the novel flash ironmaking technology (FIT) can be quite reasonable vis-à-vis the blast furnaces. A flash reactor of 12 m diameter and 35 m height with a single burner operating at atmospheric pressure would produce 1.0 million tons of iron per year. The height can be further reduced by either using multiple burners, preheating the feed gas, or both. The computational fluid dynamics (CFD)-based design of potential industrial reactors for flash ironmaking pointed to a number of features that should be incorporated. The flow field should be designed in such a way that a larger portion of the reactor is used for the reduction reaction but at the same time excessive collision of particles with the wall must be avoided. Further, a large diameter-to-height ratio that still allows a high reduction degree should be used from the viewpoint of decreased heat loss. This may require the incorporation of multiple burners and solid feeding ports.
Rare earth elements (REE) are necessary for advanced technological and energy applications. To support the emerging need, it is necessary to identify new domestic sources of REE and technologies to separate and recover saleable REE product in a safe and economical manner. Underclay rock associated with Central Appalachian coal seams and prevalent in coal utilization waste products is an alternative source of REE to hard rock ores that are mainly composed of highly refractory REE-bearing minerals. This study utilizes a suite of analytical techniques and benchtop leaching tests to characterize the properties and leachability of the coal seam underclays sampled. Laboratory bench-top and flow-through reactor leaching experiments were conducted on underclay rock powders to produce a pregnant leach solution (PLS) that has relatively low concentrations of gangue elements Al, Si, Fe, and Th and is amenable to further processing steps to recover and produce purified REE product. The leaching method described here uses a chelating agent, the citrate anion, to solubilize elements that are adsorbed, or weakly bonded to the surface of clay minerals or other mineral solid phases in the rock. The citrate PLS produced from leaching specific underclay powders contains relatively higher concentrations of REE and lower concentrations of gangue elements compared to PLS produced from sequential digestion using ammonium sulfate and mineral acids. Citrate solution leaching of underclay produces a PLS with lower concentrations of gangue elements and higher concentrations of REE than achieved with hydrochloric acid or sulfuric acid. The results provide a preliminary assessment of the types of REE-bearing minerals and potential leachability of coal seam underclays from the Central Appalachian basin.
Critical elements in coal and coal-bearing sequences (e.g., Li, Sc, V, Ga, Ge, Se, Y and rare earth elements, Zr, Nb, Au, Ag, platinum group elements, Re, and U) have attracted great attention because their concentrations in some cases may be comparable to those of conventional ore deposits. The enrichment of critical elements in coals, particularly those of Carboniferous-Permian and Cenozoic ages, have generally been attributed to within-plate (plume-related) volcanism and associated hydrothermal activity. However, Cretaceous coals are not commonly rich in critical elements, with the exception of some (e.g., Ge and U) in localised areas. This paper globally reviewed metalliferous coals from Siberia, the Russian Far East, Mongolia, South America, the United States and Mexico, Canada (Alberta and British Columbia), China, Africa, and Australasia (Victoria, Queensland, New South Wales, South Australia, Northern Territory, New Zealand, Nelson, West Coast, Canterbury, Otago, and Southland). The world-class Ge-U or Ge deposits in North China, Mongolia, and Siberia are the only commercially significant representatives of the Cretaceous metalliferous coals, which are related to bio-chemical reduction of oxidized meteoric, hydrothermal, or sea waters by organic matter of the peat bogs. The common Cretaceous coals worldwide are generally not rich in critical elements because intensive igneous activity led to extensive acidification of terrestrial and marine waters, which are responsible for the low coal metallogenesis during the Cretaceous period, especially the Early Cretaceous time.
The gold contained in copper ores is an important resource for the gold industry. In some cases, elemental gold is present and can be recovered by selective flotation. It has been reported that the gold grade and recovery can be increased, without sacrificing the copper recovery, by replacing AERO 3477 (diisobutyl dithiophosphate (DTP)) with AERO 7249 (mixture of diisobutyl monothiophosphate (MTP) and diisobutyl dithiophosphate (DTP)) as the main collector. The fundamental understanding of the improvement in selectivity with the addition of MTP in the flotation of elemental gold from pyrite is limited and is the subject of this paper. In this regard, the hydrophobicity and selectivity of DTP and MTP in the flotation of pyrite and gold are compared and discussed. Density functional theory (DFT) was used to examine the electron density, reactivity, highest occupied molecular orbital (HOMO), and lowest unoccupied molecular orbital (LUMO) of the MTP and DTP collectors. The interaction energies for the adsorption of MTP and DTP from fresh pyrite, oxidized pyrite and gold surfaces were calculated and discussed with respect to the experimental results reported in the literature. Molecular dynamics simulation (MDS) was used to examine the adsorption state of MTP and DTP on the pyrite (100) and Au (111) surfaces.
Rare Earth Elements (REE) phosphates (monazite, xenotime, and rhabdophane) are critical REE-bearing minerals typically formed in hydrothermal and magmatic ore deposits. The thermodynamic properties of those REE minerals are crucial to understanding the solubility, speciation, and transport of REE complexes. However, the standard-state Gibbs free energy of formation (∆G°f) values reported for these minerals in the literature vary by up to 25 kJ mol−1. Here, we present linear free energy relationships that allow the evaluation and estimation of the ∆G°f values at 25 °C and 1 bar for the three minerals from the ionic radius (rREE3+) and the non-solvation Gibbs free energy contribution to the REE3+ aqua ion (∆G°n, REE3+): ∆G°f,monazite − 399.71 rREE3+ = 1.0059 ∆G°n,REE3+ − 2522.51; ∆G°f,xenotime − 344.08 rREE3+ = 0.9909 ∆G°n,REE3+ − 2451.53; and ∆G°f,rhabdophane − 416.17 rREE3+ = 1.0067 ∆G°n, REE3+ − 2688.86. Moreover, based on the new dataset derived for REE end-members, we re-fitted the binary Margules parameter (W) from previous theoretical calculations into linear correlations: W + 0.00204 ∆G°’n,monazite = 39.3549 ∆V + 0.0641; W + 0.00255 ∆G°’n,xenotime = 25.4885 ∆V − 0.0062. The internally consistent thermodynamic properties of these REE phosphates are incorporated into the computer program Supcrtbl, which is available online at Zhu’s research website.
Microorganisms (Acidithiobacillus ferrooxidanns) are effective in oxidizing ferrous ions that can be used to oxidize pyrite and produce sulfuric acid. Many coal waste resources contain significant concentrations of rare earth elements (REE) and critical materials (CM) that can be extracted using sulfuric acid. These coal waste resources often contain significant concentrations of pyrite, which if not utilized or removed present a future environmental liability for potential acid mine drainage. Thus, the combination of pyrite and REE/CM in coal waste provides a significant resource opportunity for sulfuric acid generation that can be utilized using biooxidation. In addition, the pyrite concentrate used for acid generation also contains REE/CM content that is released during biooxidation of the pyrite concentrate that augments the REE/CM release from the main ore being leached with the acid generated from the pyrite. Thus, this approach provides a very significant environmental advantage as well as augmented REE/CM recovery. Although there are many studies associated with biooxidation in relation to mineral oxidation, there is a lack of information regarding the effects of operating parameters on biooxidation performance and optimization for practical applications. In this study, findings from research in assessing and improving biooxidation for acid generation for REE/CM extraction are presented. Results show that bacteria can very effectively and efficiently oxidize ferrous ions to ferric ions, which oxidize pyrite to produce acid for REE/CM extraction. The factors that showed significant impact on biooxidation performance include air flow rate, stirring speed, residence time, solids concentration, and temperature. The dominance of Leptospirillum ferriphilum species was noted in the bioreactor after a prolonged period of operation, although Acidithiobacillus ferrooxidanns was used in the beginning.
This paper presents the first blind prediction stage of the Tidal Turbine Benchmarking Project being conducted and funded by the UK's EPSRC and Supergen ORE Hub. In this first stage, only steady flow conditions, at low and elevated turbulence (3.1%) levels, were considered. Prior to the blind prediction stage, a large laboratory scale experiment was conducted in which a highly instrumented 1.6m diameter tidal rotor was towed through a large towing tank in well-defined flow conditions with and without an upstream turbulence grid. Details of the test campaign and rotor design were released as part of this community blind prediction exercise. Participants were invited to use a range of engineering modelling approaches to simulate the performance and loads of the turbine. 26 submissions were received from 12 groups from across academia and industry using solution techniques ranging from blade resolved computational fluid dynamics through actuator line, boundary integral element methods, vortex methods to engineering Blade Element Momentum methods. The comparisons between experiments and blind predictions were extremely positive helping to provide validation and uncertainty estimates for the models, but also validating the experimental tests themselves. The exercise demonstrated that the experimental turbine data provides a robust data set against which researchers and design engineers can test their models and implementations to ensure robustness in their processes, helping to reduce uncertainty and provide increased confidence in engineering processes. Furthermore, the data set provides the basis by which modellers can evaluate and refine approaches.
Abstract. of synthetic Sb 2 O 5 , MgSb 2 O 6 (analogue of the mineral byströmite), Mg[Sb(OH) 6 ] 2 ∙6H 2 O (brandholzite), and natural chapmanite [(Fe 1.88 Al 0.12 )Sb(Si 2 O 5 )O 3 (OH)]. Enthalpies of reactions, including formation enthalpies, were evaluated using reference compounds Sb, Sb 2 O 3 , Sb 2 O 5 , and other phases, with high-temperature oxide melt solution calorimetry in lead borate and sodium molybdate solvents. Heat capacity and entropy were determined by relaxation and differential scanning calorimetry. The best set of Δ f H o (kJ mol -1 ) and S o (J mol -1 K -1 ) is byströmite -1733.0±3.6, 139.3±1.0; brandholzite -5243.1±3.6, 571.0±4.0; and chapmanite -3164.9±4.7, 305.1±2.1. The data for chapmanite give Δ f G o of -2973.6±4.7 kJ mol -1 and log K=-17.10 for the dissolution reaction (Fe 1.88 Al 0.12 )Sb(Si 2 O 5 )O 3 (OH) + 6H + → 1.88Fe 3+ + 0.12Al 3+ + 2SiO$_2^0$ + Sb(OH)$_3^0$ + 2H 2 O. Analysis of the data showed that chapmanite is finely balanced in terms of its stability with schafarzikite (FeSb 2 O 4 ) and tripuhyite (FeSbO 4 ) under a specific, narrow range of conditions when both aqueous Fe(III) and Sb(III) are abundant. In such a model, chapmanite is metastable by a narrow margin but could be stabilized by high SiO$_2^0$(aq) activities. Natural assemblages of chapmanite commonly contain abundant amorphous silica, suggesting that this mechanism may be indeed responsible for the formation of chapmanite. Chapmanite probably forms during low-temperature hydrothermal overprint of pre-existing Sb ores under moderately reducing conditions; the slightly elevated temperatures may help to overcome the kinetic barrier for its crystallization. During weathering, sheet silicates may adsorb Sb 3+ in tridentate hexanuclear fashion, thus exposing their chapmanite-like surfaces to the surrounding aqueous environment. Formation of chapmanite, as many other sheet silicates, under ambient conditions, is unlikely.
The instrument is a polarimetric W-Band simultaneous transmission simultaneous reception (STSR) Doppler Cloud Radar manufactured by Radiometer Physics GmbH (RPG, instrument type RPG-FMCW-94-DP). It was deployed about 500m away from the ARM M1 facility in Gothic (CO) near the Ore House between Nov 15, 2022 and Jun 5, 2023 at an altitude of 2913 m. The Doppler cloud radar was mounted on a prototype of a cold temperature scanner manufactured by RPG. The dataset contains common radar variables like equivalent radar reflectivity factor, mean Doppler velocity, Doppler spectrum width as well as common polarimetric radar variables like differential phase shift (PhiDP), specific differential phase shift (KDP), correlation coefficient (RHV) and differential reflectivity (ZDR). Between Nov 15, 2022, and Feb 7, 2023 the radar was operated at 40° constant elevation and 151° azimuth (towards the KAZR at the AMF1). Between Feb 7 and Mar 15, 2023 the following scan cycle was repeated in 15min intervals: zenith pointing measurements, RHI scans from 0° to 90° and 90° to 0° elevation at 151° azimuth, constant elevation measurements at 40° elevation and 151° azimuth and PPI scans at 85° elevation for wind retrievals (one PPI per hour). Between Mar 15 18:18 UTC and Apr 8, 2023 11:04 UTC, the scanner was stuck at 72° elevation, which resulted in corrupted files for this period. For that period, the files containing data are uploaded but should be treated with care. Between Apr 8 and Apr 14, 2023 the scanning pattern described above was performed again. Afterwards, except for May 17 and May 18, 2023 where scanning patterns as described above were performed, measurements continued at 40° elevation and 151° azimuth until May 22, 2023 09:00 UTC. The scanning pattern was then started again, but without hourly PPI measurements until May 31, 2023. Between May 31 and Jun 5, 2023 solely zenith-pointing observations were performed. The data provided here are the RPG Level 1 (L1) files, Doppler spectra Level 0 (L0) files are available upon request.
Impurities remaining in the metallic copper are identified and quantified by spectrographic and neutron activation analysis. Determination of the type of ore used for the copper artifact places the geographic point of origin of the artifact.
Progressive wove and reverberant acoustic fields ore often used in the laboratory for qualification testing of aerospace structures that are subjected to unsteady aerodynamic environments which occur during flight through the atmosphere. Acoustic simulation of these in-flight environments i s achieved i f the structural vibration response to acoustic excitation is equivalent, over the frequency range of interest, to the response caused by aerodynamic turbulence. To determine the degree of response simulation that could be expected for such qualification testing of the Apollo Spacecraft, responses of a segment of the Apollo structure were estimated theoretically for both acoustic and flight environments. The vibration analysis presented in this report was performed for the Spacecraft Lunar Module Adaptor; and the three environments treated are turbulence at Mach 1 and Mach 2, a reverberant acoustic field, and a modified acoustic progressive wave field. The progressive wave field is assumed to be generated within a specially designed shroud of sixteen axially oriented ducts which is constructed around and contoured to the external skin of the vehicle. Each duct is open on the side adjacent to the skin and is driven acoustically at one end by an independent noise source, thus allowing for different pressure correlation patterns around the circumference of the vehicle. The purpose of the analysis was to determine the effects of surface pressure correlation lengths on the response characteristics of representative Apollo structure, and to select on this basis, the optimum acoustic environment for structural vibration qualification tests of the Apollo in the Spacecraft Acoustic Laboratory at MSC. The method of analysis employed consists of determining, independently, the space average, mean-square acceleration spectral density for each of the significant modes of vibration of an equivalent cylindrical shell, and then expressing the total structural response as a linear summation of these modal responses. Approximately 570 classical modes of a pinned-end cylinder were used in order to find the spectral response characteristics of the structure throughout the frequency range of 10 - 1,000 Hz. The effective forcing functions or joint acceptances of the various modes of vibration were computed and are presented graphically for each of the pressure excitation environments. A brief development of the response equations used is presented in the report. Space average acceleration response spectra were computed for twelve different cases including aerodynamic turbulence at Mach 1 and Mach 2, reverberant acoustic field, five duct correlation patterns, two cases of an axially damped progressive wave field, and two cases in which the structural damping constant was varied from the expected value. The response spectra were computed and plotted by a high speed digital computer far a flat excitation pressure spectrum; and the response spectra were numerically integrated to give one-third octave bond average responses. A complete set of digital computer programs has been developed for both flat plate and cylindrical shell structures for the above environments, and each requires run times of three minutes or less. Thus, the work presented herein, along with the results, constitutes a practical advancement to the existing state-of-the-art of vibration prediction.
Radiometer, developed for use on moon or planets, could be used to - determine layering and structure as deep as 100 feet below earth surface, determine physical properties of subsurface by variation of dielectric constants, identify types of materials including ore bodies and oil, and locate subsurface deposits of moisture.
The feasibility of using multispectral, color, color infrared, thermal infrared imagery and related ground data to recognize, identify, determine and monitor the status of mineral ore and metals stockpiles is studied. An attempt was made to identify valid, unique spectral signatures of such materials for possible use under a wide variety of environmental circumstances. Research emphasis was upon the analysis of the multiband imagery from the various film-filter combinations, using density analysis techniques.