Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Parameterization of turbulence and the planetary boundary layer in the GLA Fourth Order GCM

A new scheme has been developed to model the planetary boundary layer in the GLAS Fourth Order GCM through explicit resolution of its vertical structure into two or more vertical layers. This involves packing the lowest layers of the GCM close to the ground and developing new parameterization schemes that can express the turbulent vertical fluxes of heat, momentum and moisture at the earth's surface and between the layers that are contained with the PBL region. Offline experiments indicate that the combination of the modified level 2.5 second-order turbulent closure scheme and the 'extended surface layer' similarity scheme should work well to simulate the behavior of the turbulent PBL even at the coarsest vertical resolution with which such schemes will conceivably be used in the GLA Fourth Order GCM.

Helfand, H. M.↗

Uniformly high order accurate essentially non-oscillatory schemes. III

In the present continuation of development and analysis efforts towards essentially nonoscillatory shock-capturing approximations of hyperbolic conservation laws, the Godunov (1959) scheme and its MUSCL second-order-accurate extension are generalized to an arbitrary order of accuracy by means of a hierarchy of uniformly high-order-accurate schemes. The design method, which involves the solution's essentially nonoscillatory piecewise polynomial reconstruction on the basis of its cell averages, followed by time-evolution through an approximate solution of the resulting initial value problem and its averaging over each cell, employs an adaptive stencil of grid points to yield schemes that are highly nonlinear.

Harten, Ami↗

Digital robust active control law synthesis for large order systems using constrained optimization

This paper presents a direct digital control law synthesis procedure for a large order, sampled data, linear feedback system using constrained optimization techniques to meet multiple design requirements. A linear quadratic Gaussian type cost function is minimized while satisfying a set of constraints on the design loads and responses. General expressions for gradients of the cost function and constraints, with respect to the digital control law design variables are derived analytically and computed by solving a set of discrete Liapunov equations. The designer can choose the structure of the control law and the design variables, hence a stable classical control law as well as an estimator-based full or reduced order control law can be used as an initial starting point. Selected design responses can be treated as constraints instead of lumping them into the cost function. This feature can be used to modify a control law, to meet individual root mean square response limitations as well as minimum single value restrictions. Low order, robust digital control laws were synthesized for gust load alleviation of a flexible remotely piloted drone aircraft.

Mukhopadhyay, Vivek↗

An error bound for a discrete reduced order model of a linear multivariable system

The design of feasible controllers for high dimension multivariable systems can be greatly aided by a method of model reduction. In order for the design based on the order reduction to include a guarantee of stability, it is sufficient to have a bound on the model error. Previous work has provided such a bound for continuous-time systems for algorithms based on balancing. In this note an L-infinity bound is derived for model error for a method of order reduction of discrete linear multivariable systems based on balancing.

Al-Saggaf, Ubaid M.↗

Coexisting static magnetic ordering and superconductivity in CeCu2.1Si2 found by muon spin relaxation

Zero- and longitudinal-field muon spin relaxation measurements on a heavy fermion system CeCu2.1 Si2 have revealed an onset of static magnetic ordering below T(M) approximately 0.8 K, which coexists with superconductivity below T(c) = 0.7 K. The line shapes of the observed muon spin depolarization functions suggest an ordering in either spin glass or incommensurate spin-density-wave state, with a small averaged static moment of the order of 0.1 micro-B per formula unit at T approaches 0.

Uemura, Y. J.↗

Static magnetic ordering of CeCu2.1Si2 found by muon spin relaxation

Zero- and longitudinal-field muon spin relaxation measurements on a polycrystal sample of a heavy fermion superconductor CeCu2.1 Si2 (T(c) = 0.7 K) have revealed an onset of static magnetic ordering below T approximately 0.8 K. The line shapes of the observed spectra in zero field indicate a wide distribution of static random local fields at muon sites, suggesting that the ordering is either spin glass or incommensurate spin-density-wave state. The observed width of the random local field at T = 0.05 K corresponds to a small averaged static moment of the order of 0.1 micro-B per formula unit.

Uemura, Y. J.↗

Second-order upwind differencing in a recirculating flow

The accuracy and stability of the second order upwind differencing scheme was investigated. The solution algorithm employed is based on a coupled solution of the nonlinear finite difference equations by the multigrid technique. Calculations have been made of the driven cavity flow for several Reynolds numbers and finite difference grids. In comparison with the hybrid differencing, the second order upwind differencing is somewhat more accurate but it is not monotonically accurate with mesh refinement. Also, the convergence of the solution algorithm deteriorates with the use of the second order upwind differencing.

Vanka, S. P.↗

Second-order closure models for rotating turbulent flows

The physical properties of the commonly used second-order closure models are examined theoretically for rotating turbulent flows. Comparisons are made with results which are a rigorous consequence of the Navier-Stokes equations for the problem of fully-developed turbulent channel flow in a rapidly rotating framework. It is demonstrated that all existing second-order closures yield spurious physical results for this test problem of rotating channel flow. In fact, the results obtained are shown to be substantially more unphysical than those obtained from the simpler k-epsilon and k-l models. Modifications in the basic structure of these second-order closure models are proposed which can alleviate this problem.

Speziale, Charles G.↗

Spacecraft attitude determination using a second-order nonlinear filter

The stringent attitude determination accuracy and faster slew maneuver requirements demanded by present-day spacecraft control systems motivate the development of recursive nonlinear filters for attitude estimation. This paper presents the second-order filter development for the estimation of attitude quaternion using three-axis gyro and star tracker measurement data. Performance comparisons have been made by computer simulation of system models and filter mechanization. It is shown that the second-order filter consistently performs better than the extended Kalman filter when the performance index of the root sum square estimation error of the quaternion vector is compared. The second-order filter identifies the gyro drift rates faster than the extended Kalman filter. The uniqueness of this algorithm is the online generation of the time-varying process and measurement noise covariance matrices, derived as a function or the process and measurement nonlinearity, respectively.

Vathsal, S.↗

High-temperature ordered intermetallic alloys II; Proceedings of the Second Symposium, Boston, MA, Dec. 2-4, 1986

The papers presented in this volume provide on overview of recent theoretical and experimental research in the field of high-temperature ordered intermetallic alloys. The papers are gouped under the following headings: ordering behavior and theory, microstructures, mechanical behavior, alloy design and microstructural control, and metallurgical properties. Specific topics discussed include antiphase domains, disordered films and the ductility of ordered alloys based on Ni3Al; kinetics and mechanics of formation of Al-Ni intermetallics; deformability improvements of L1(2)-type intermetallic compounds; B2 aluminides for high-temperature applications; and rapidly solidified binary TiAl alloys.

Stoloff, N. S.↗

Tunneling near the peaks of potential barriers - Consequences of higher-order Wentzel-Kramers-Brillouin corrections

The quantum-mechanical tunneling transmission coefficient is derived for energies near the peak of a general potential barrier, to fourth order in the WKB approximation, using a method based on an eighth-order Taylor expansion of the potential near the peak. The result agrees with contour-integral formulations of WKB tunneling. For the Poeschl-Teller potential the WKB series converges rapidly to the known exact transmission coefficient. Higher-order WKB corrections may be important in attempts to determine the internuclear potential by inversion using low-energy fusion cross-section data.

Will, Clifford M.↗

Absorbing boundary conditions for second-order hyperbolic equations

A uniform approach to construct absorbing artificial boundary conditions for second-order linear hyperbolic equations is proposed. The nonlocal boundary condition is given by a pseudodifferential operator that annihilates travelling waves. It is obtained through the dispersion relation of the differential equation by requiring that the initial-boundary value problem admits the wave solutions travelling in one direction only. Local approximation of this global boundary condition yields an nth-order differential operator. It is shown that the best approximations must be in the canonical forms which can be factorized into first-order operators. These boundary conditions are perfectly absorbing for wave packets propagating at certain group velocities. A hierarchy of absorbing boundary conditions is derived for transonic small perturbation equations of unsteady flows. These examples illustrate that the absorbing boundary conditions are easy to derive, and the effectiveness is demonstrated by the numerical experiments.

Jiang, Hong↗

Development of higher-order modal methods for transient thermal and structural analysis

A force-derivative method which produces higher-order modal solutions to transient problems is evaluated. These higher-order solutions converge to an accurate response using fewer degrees-of-freedom (eigenmodes) than lower-order methods such as the mode-displacement or mode-acceleration methods. Results are presented for non-proportionally damped structural problems as well as thermal problems modeled by finite elements.

Camarda, Charles J.↗

Higher order dispersion in the propagation of a gravity wave packet

To the first order of approximation, the complex amplitude of a wave packet in an anisotropic and dispersive medium is convected with the group of velocity. However, a gravity wave is a vector wave. Its wave packet must be formed by superposition of various wave numbers with corresponding frequencies, as is the case for scalar waves, and additionally by superposing many eigenmodes which also depend on the wave number. To represent the vector wave packet self-consistently, it is found that a gradient term must be included in the expansion. For a Guassian wave packet, this gradient term is shown to have important implications on the velocity vector as represented by its hodograph. Numerical results show that the hodograph is influenced by the location of the relative position of interest from the center of a Gaussian pulse. Higher order expansion shows that an initial Gaussian wave packet will retain its Gaussian shape as it propagates, but the pulse will spread in all directions with its major axis undergoing a rotation. Numerical results indicate that these higher order dispersive effects may be marginally observable in the atmosphere.

Yeh, K. C.↗

Light scattering by an arbitrary particle - The scattering-order formulation of the coupled-dipole method

The field scattered by an arbitrary particle modeled as an array of coupled dipoles can be expressed as an infinite series in terms of scattering orders. The fields of a given scattering order can be calculated from those of the previous order. When the series converge, the approximate method agrees well with the exact theory for a sphere. The maximum size of the dipolar array that can be used with the method as well as the number of terms required for convergence depends on the relative refractive index and the shape of the particle.

Singham, Shermila Brito↗

One-jet inclusive cross section at order a(s)-cubed - Gluons only

A complete calculation of the hadron jet cross-section at one order beyond the Born approximation is performed for the simplified case in which there are only gluons. The general structure of the differences from the lowest-order cross-section are described. This step allows two important improvements in the understanding of the theoretical hadron jet cross-section: first, the cross section at this order displays explicit dependence on the jet cone size, so that explicit account can be taken of the differences in jet definitions employed by different experiments; second, the magnitude of the uncertainty of the theoretical cross-section due to the arbitrary choice of the factorization scale has been reduced by a factor of two to three.

Ellis, Stephen D.↗

Ordering in the Fe-Ni system under electron irradiation

The disorder-order transformation was generated in a range of Fe-Ni alloys using 1 MeV electrons in a high voltage electron microscope. The experimental factors that influence the occurrence of the transformation were determined, and the critical disordering temperature, Tc, was determined as a function of composition. It was demonstrated that the irradiation enhanced the ordering reaction kinetics. A metastable, ordered phase transformation was not induced. From the results, it is possible to deduce new information about the Fe-Ni phase diagram below 350 C.

Reuter, K. B.↗

Compact high-order schemes for the Euler equations

An implicit approximate factorization (AF) algorithm is constructed which has the following characteristics. In 2-D: the scheme is unconditionally stable, has a 3 x 3 stencil and at steady state has a fourth order spatial accuracy. The temporal evolution is time accurate either to first or second order through choice of parameter. In 3-D: the scheme has almost the same properties as in 2-D except that it is now only conditionally stable, with the stability condition (the CFL number) being dependent on the cell aspect ratios, delta y/delta x and delta z/delta x. The stencil is still compact and fourth order accuracy at steady state is maintained.

Abarbanel, Saul↗