Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Normal modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Conductive surge testing of circuits and systems

Techniques are given for conductive surge testing of powered electronic equipment. The correct definitions of common and normal mode are presented. Testing requires not only spike-surge generators with a suitable range of open-circuit voltage and short-circuit current waveshapes, but also appropriate means, termed couplers, for connecting test surges to the equipment under test. Key among coupler design considerations is minimization of fail positives resulting from reduction in delivered surge energy due to the coupler. Back-filters and the lines on which they are necessary, are considered as well as ground-fault and ground potential rise. A method for monitoring delivered and resulting surge waves is mentioned.

Richman, P.↗

Numerical study of baroclinic instability

The effect of a power law gravity field on baroclinic instability is examined with emphasis on the case of inverse fifth power gravity, since this is the power law produced when terrestrial gravity is simulated in spherical geometry by electrostatic means. Growth rates of unstable normal modes were obtained as a function of parameters of the problem by solving a second order differential equation numerically. Results are compared with those from an earlier study where gravity was a constant. The conclusion is that, over the range of parameter space explored here, there is no significant change in the character of theoretical regime diagrams if the vertically averaged gravity is used as a parameter.

Geisler, J. E.↗

The effect of transverse shear in a cracked plate under skew-symmetric loading

The problem of an elastic plate containing a through crack and subjected to twisting moments or transverse shear loads is considered. By using a bending theory which allows the satisfaction of the boundary conditions on the crack surface regarding the normal and the twisting moments and the transverse shear load separately, it is found that the resulting asymptotic stress field around the crack tip becomes identical to that given by the elasticity solutions of the plane strain and antiplane shear problems. The problem is solved for uniformly distributed or concentrated twisting moment or transverse shear load and the normalized Mode II and Mode III stress-intensity factors are tabulated. The results also include the effect of the Poisson's ratio and material orthotropy for specially orthotropic materials on the stress-intensity factors.

Delale, F.↗

Spectral characteristics of vortex breakdown flowfields

Laser-Doppler anemometer measurements upstream and in the wakes of vortex breakdowns of bubble and spiral types are described. Spectral analysis of the data indicates prominent oscillations in the wakes at less than 10 Hz. These oscillations correspond closely to theoretical predictions of the linearly most unstable normal modes of the time-averaged mean flow profiles. The oscillations are more energetic, and vortex core expansions are greater for flows with a bubble form of vortex breakdown, which is therefore regarded as the stronger form of breakdown.

Garg, A. K.↗

HF-induced parametric decay in presence of field-aligned irregularities

A nonlinear theory for the saturation of the HF-induced parametric decay instability is formulated in terms of the normal modes of a field-aligned plasma wave duct. Coupling coefficients between modes are derived, and a saturation spectrum is computed numerically for a typical irregularity. The computed spectrum shows that unstable waves may propagate at larger angles to the magnetic field than would be the case in a regular medium. The relevance of this work to the experiment of Muldrew and Showen (1977), concerning the height of the HF-induced plasma line at Arecibo, is discussed. A possible explanation is also found for the 'decay line' feature in comparison with the 'broad bump' in the observed backscatter spectrum.

Rypdal, K.↗

Improvement of analytical dynamic models using modal test data

A method developed to determine maximum changes in analytical mass and stiffness matrices to make them consistent with a set of measured normal modes and natural frequencies is presented. The corrected model will be an improved base for studies of physical changes, boundary condition changes, and for prediction of forced responses. The method features efficient procedures not requiring solutions of the eigenvalue problem, and the ability to have more degrees of freedom than the test data. In addition, modal displacements are obtained for all analytical degrees of freedom, and the frequency dependence of the coordinate transformations is properly treated.

Berman, A.↗

Generalized Grueneisen tensor from solid nonlinearity parameters

Anharmonic effects in solids are often described in terms of generalized Grueneisen parameters which measure the strain dependence of the lattice vibrational frequencies. The relationship between these parameters and the solid nonlinearity parameters measured directly in ultrasonic harmonic generation experiments is derived using an approach valid for normal-mode elastic wave propagation in any crystalline direction. The resulting generalized Grueneisen parameters are purely isentropic in contrast to the Brugger-Grueneisen parameters which are of a mixed thermodynamic state. Experimental data comparing the isentropic generalized Grueneisen parameters and the Brugger-Grueneisen parameters are presented.

Cantrell, J. H., Jr.↗

Theoretical regime diagrams for thermally driven flows in a beta-plane channel in the presence of variable gravity

The effect of a power law gravity field on baroclinic instability is examined, with a focus on the case of inverse fifth power gravity, since this is the power law produced when terrestrial gravity is simulated in spherical geometry by a dielectric force. Growth rates are obtained of unstable normal modes as a function of parameters of the problem by solving a second order differential equation numerically. It is concluded that over the range of parameter space explored, there is no significant change in the character of theoretical regime diagrams if the vertically averaged gravity is used as parameter.

Geisler, J. E.↗

Automated dynamic analytical model improvement

A method is developed and illustrated which finds minimum changes in analytical mass and stiffness matrices to make them consistent with a set of measured normal modes and natural frequencies. The corrected model is an improved base for studies of physical changes, changes in boundary conditions, and for prediction of forced responses. Features of the method are: efficient procedures not requiring solutions of the eigenproblem; the model may have more degrees of freedom than the test data; modal displacements at all the analytical degrees of freedom are obtained; the frequency dependence of the coordinate transformations are properly treated.

Berman, A.↗

Absorption band Q model for the Earth

Attenuation in solids and liquids, as measured by the quality factor Q, is typically frequency dependent. In seismology, however, Q is usually assumed to be independent of frequency. Body wave, surface wave, and normal mode data are used to place constraints on the frequency dependence of Q in the mantle. Specific features of the absorption band model are: low-Q in the seismic band at both the top and the base of the mantle, low-Q for long-period body waves in the outer core, an inner core Q sub s that increases with period, and low Q sub p/Q sub s at short periods in the middle mantle.

Anderson, D. L.↗

Space vehicle acoustics prediction improvement for payloads

The modal analysis method was extensively modified for the prediction of space vehicle noise reduction in the shuttle payload enclosure, and this program was adapted to the IBM 360 computer. The predicted noise reduction levels for two test cases were compared with experimental results to determine the validity of the analytical model for predicting space vehicle payload noise environments in the 10 Hz one-third octave band regime. The prediction approach for the two test cases generally gave reasonable magnitudes and trends when compared with the measured noise reduction spectra. The discrepancies in the predictions could be corrected primarily by improved modeling of the vehicle structural walls and of the enclosed acoustic space to obtain a more accurate assessment of normal modes. Techniques for improving and expandng the noise prediction for a payload environment are also suggested.

Dandridge, R. E.↗

Stability analysis of numerical boundary conditions and implicit difference approximations for hyperbolic equations

Implicit, noniterative, finite difference schemes were recently developed by several authors for multidimensional systems of nonlinear hyperbolic partial differential equations. When applied to linear model equations with periodic boundary conditions those schemes are unconditionally stable (A-stable). As applied in practice the algorithms often face a severe time step restriction. A major source of the difficulty is the treatment of the numerical boundary conditions. One conjecture was that unconditional stability requires implicit numerical boundary conditions. An apparent counter example was the space time extrapolation considered by Gustafsson, Kreiss, and Sunstrom. Spatial (implicit) and space time (explicit) extrapolation using normal mode analysis for a finite and infinite number of spatial mesh intervals are examined. The results indicate that for unconditional stability with a finite number of spatial mesh intervals, the numerical boundary conditions must be implicit.

Beam, R. M.↗

Comments on the dissipation of hydromagnetic surface waves

A recent paper by Wentzel, which claims to calculate a plasma heating rate due to dissipation of surface waves in an ideal magnetohydrodynamic (MHD) fluid, is found to be in error in interpretation. A well-established general theorem pertaining to the conservative ideal MHD fluid requires that the normal mode calculated by Wentzel be oscillatory in time. Within ideal MHD, dissipation and plasma heating are therefore impossible.

Lee, M. A.↗

Beam stresses induced by a turbulent boundary layer and simulated with a reverberant acoustic field

Unsteady pressure fluctuations are a feature of the flow field of an airplane or a space vehicle in atmospheric flight. Undesirable effects of these fluctuations range from internal (cabin) noise to structural fatigue and damage of avionic and ordnance systems. The integrity to withstand these fluctuating loads is established through reverberant room acoustical qualification testing. The purpose of this paper is to develop a methodology of simulating turbulent boundary layer fluctuating pressure loading for a simply supported beam with a reverberant acoustic field. This goal was accomplished using normal mode vibration analysis. The main results were developed in terms of dimensionless quantities such as turbulent boundary layer spectrums, reverberant acoustical field simulation spectrums, and stress response spectrums with parameters: dimensionless fundamental frequency, Mach number, and relative boundary layer displacement thickness.

Schutzenhofer, L. A.↗

Dynamic stability of a rotor blade using finite element analysis

The aeroelastic stability of flap bending, lead-lag bending, and torsion of a helicopter rotor blade in hover is examined using a finite element formulation based on the principle of virtual work. Quasi-steady two-dimensional airfoil theory is used to obtain the aerodynamic loads. The rotor blade is discretized into beam elements, each with ten modal degrees of freedom. The resulting nonlinear equations of motion are solved for steady-state blade deflections through an iterative procedure. The flutter solution is calculated assuming blade motion to be a small perturbation about the steady solution. The normal mode method based on the coupled rotating natural modes about the steady deflections is used to reduce the number of equations in the flutter eigenanalysis. Results are presented for hingeless and articulated rotor blade configurations.

Sivaneri, N. T.↗

Barotropic instability of zonal flows

The barotropic instability of zonal flows due to infinitesimal normal-mode perturbations is considered, with the zonal flow assumed to be continuous and either monotonic or nonmonotonic and allowed to have one or more inflection points. A sufficient condition for instability is derived for this general flow profile that complements that of Arnol'd (1965), which restricted itself to the prediction of stability only.

Tung, K. K.↗

Long-wave baroclinic instability in the troposphere and stratosphere with spherical geometry

The most unstable normal modes are obtained for a global, quasi-geostrophic and spectral-form atmospheric model that includes wavenumbers one through six. In a first set of model calculations, the basic state represents Northern Hemisphere winter solstice conditions, whose long waves are deep modes having maximum kinetic energy in the stratosphere. These internal modes exist even in the presence of a stratospheric wind minimum, but propagate vertically into the stratosphere only north of this minimum, at the latitudes of the polar jet. The basic state for a second set of calculations is the axisymmetric solution corresponding to radiative equilibrium, with large vertical wind shear and all modes being essentially external, tropospheric Charney modes.

Straus, D. M.↗

Vibration Analysis Reduces Computer Time

Improved calculation method promises to reduce computer time by factor of 10 for vibration analysis of complex structures. Method originally developed to predict mechanical response of spacecraft to maneuvers in various cases in which same booster is used with different payloads. Method is more exact than conventional normal-mode methods; it involves no initial approximations of assumptions. Calculation cost is reduced without loss of accuracy.

Engels, R. C.↗