Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NIOBATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Rietveld refinement and dielectric relaxation of a new rare earth based double perovskite oxide: BaPrCoNbO{sub 6}

A new rare earth based double perovskite oxide barium praseodymium cobalt niobate, BaPrCoNbO{sub 6} (BPCN) is synthesized by solid-state reaction technique. Rietveld analysis of X-ray diffraction (XRD) data shows that the compound crystallizes in a perovskite like tetragonal structure which belongs to the I4/mmm space group with lattice parameters a=b=5.6828(9) Å, c=8.063(2) Å. Structural analysis reveals 1:1 ordered arrangement for the Co{sup 2+} and Nb{sup 5+} cations over the six-coordinate B-sites of BPCN. The superlattice line (1 0 1) at 2θ=19.10° arising from the alternate ordering of Co{sup 2+} and Nb{sup 5+} sites is observed in the XRD pattern which confirms the presence of cation ordering in BPCN. Fourier transform infrared spectrum shows two phonon modes of the sample due to the antisymmetric NbO{sub 6} stretching vibration. The relaxation dynamics of the conductive process in BPCN is investigated in the temperature range 303 to 503 K and in the frequency range 100 Hz to 1 MHz using impedance spectroscopy. The relaxation mechanism of the sample in the framework of electric modulus formalism is modeled by Davidson–Cole model (DCM). The values of α (distribution of relaxation time) for the DCM varies from 0.1 to 0.3 which suggests the asymmetric distribution of relaxation time for BPCN. The activation energy of the sample, calculated from both conductivity and modulus spectra, are found to be almost the same ∼0.4 eV, which indicates that the conduction mechanism for BPCN is polaron hopping. The scaling behaviour of the imaginary part of electric modulus suggests that the relaxation follows the same mechanism at various temperatures. - Graphical abstract: Rietveld refinement plot for BPCN. Inset shows the schematic presentation of the BPCN tetragonal unit cell. The Co{sup 2+} atoms are located at the centers of the CoO{sub 6} (blue) octahedra. The Nb{sup 5+} atoms are located at the centers of the NbO{sub 6} (green) octahedra. Display Omitted - Highlights: • BaPrCoNbO{sub 6} is synthesized for the first time. • Rietveld refinement of XRD data confirms tetragonal phase. • XRD confirms the presence of cation ordering in BaPrCoNbO{sub 6}. • The activation energy is ∼0.4 eV. • The conduction mechanism for BPCN is due to polaron hopping.

36 MATERIALS SCIENCE↗

Single crystal structure and SHG of defect pyrochlores CsB{sup V}MoO{sub 6} (B{sup V}=Nb,Ta)

The crystal structure and non-linear optical properties of CsNbMoO{sub 6} and CsTaMoO{sub 6} defect pyrochlores have been studied. The single crystals of these compounds grown by the flux method possess an octahedral faceting and reach up to 50 µm in size. The crystal structures of CsB{sup V}MoO{sub 6} (B{sup V}=Nb, Ta) were investigated by X-ray diffraction method. Both compounds crystallize in the cubic symmetry with noncentrosymmetric space group F-43m. The second harmonic generation of CsNbMoO{sub 6} and CsTaMoO{sub 6}was found to be 1.6×10{sup −2} and 8.5×10{sup −4} of lithium niobate, correspondingly. It has been determined that distortions of [MO{sub 6}] polyhedra (M=Nb, Ta, Mo) as well as polarizability and covalency of Nb–O and Ta–O bonds have a great effect on the second harmonic generation. - Highlights: • CsNbMoO{sub 6} and CsTaMoO{sub 6} homogeneous single crystals have been grown. • The crystal structure of CsTaMoO{sub 6} has been studied. • Nonlinear optical properties of CsNbMoO{sub 6} and CsTaMoO{sub 6} have been found. • The microscopic origin of the second harmonic generation (SHG) response have been identified.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Materials science applications of Neutron Depth Profiling at the PGAA facility of Heinz Maier-Leibnitz Zentrum

Highlights: • Exploiting the range of NDP from thin films to electrodes for Li-ion batteries • Adopting an analytical method to probe undisturbed depth profiles from thick films • Revealing depth-dependent lithium immobilization in Li-ion battery electrodes Neutron depth profiling (NDP) is a non-destructive, isotope-sensitive profiling technique to monitor concentration profiles in almost any material matrix. Since NDP is sensitive to {sup 6}Li and lithium is widely used for different material science applications such as ceramics, optical waveguides or energy-storage systems, NDP offers answers to a broad spectrum of research questions. In the present work, the recently developed instrument N4DP at MLZ is used to address two research questions which are hardly accessible by conventional analytical techniques. First, the homogeneity of lithium formations within lithium niobate thin films for optical waveguide applications is investigated. Afterwards, the accumulation of inactive lithium in the solid-electrolyte-interphase (SEI) of silicon-graphite electrodes for lithium-ion batteries is studied ex situ. Since the material mass loading differs considerably between the two applications, a new analytical technique is introduced which mathematically separates the different particle signals and thus allows to investigate samples with high mass loadings.

36 MATERIALS SCIENCE↗

Molten salt synthesis, characterization, and luminescence properties of GdNbO{sub 4}/LuTaO{sub 4}:Eu{sup 3+} phosphors

Graphical abstract: Well crystallized GdNbO4:Eu3{sup +} and LuTaO{sub 4}:Eu3{sup +} in the presence of fluxes were formed under reduced temperature in contrast to conventional method and their photophysical properties were studied. - Highlights: • Molten salt method was used to assemble two phosphors. • Both GdNbO{sub 4}:Eu{sup 3+} and LuTaO{sub 4}:Eu{sup 3+} could be red emissive. • The two powders were well dispersed as nano-particles. - Abstract: GdNbO{sub 4}:Eu{sup 3+} and LuTaO{sub 4}:Eu{sup 3+} have been successfully prepared with different fluxes (NaCl, KCl, NaCl and KCl) by the molten salt method. X-ray diffraction (XRD) patterns illustrated that well crystallized GdNbO{sub 4}:Eu{sup 3+} and LuTaO{sub 4}:Eu{sup 3+} in the presence of fluxes were formed under reduced temperature (900 °C) in contrast to conventional method (GdNbO{sub 4}:Eu{sup 3+}: around 1200 °C; LuTaO{sub 4}:Eu{sup 3+}: around 1500 °C). Scanning electron microscope (SEM) images revealed that well dispersed particles were achieved (granular or rod-like structures). Meanwhile, the photo-luminescent studies demonstrated that both niobate and tantalate are efficient hosts to sensitize europium red emissions. The results indicated that GdNbO{sub 4}:Eu{sup 3+} using NaCl as the flux gave much enhanced red emission whereas LuTaO{sub 4}:Eu{sup 3+} synthesized with the assistance of mixed salts (NaCl–KCl) achieved the best luminescence.

36 MATERIALS SCIENCE↗

Raman spectroscopy, dielectric properties and phase transitions of Ag{sub 0.96}Li{sub 0.04}NbO{sub 3} ceramics

Highlights: • First Raman scattering studies of Ag{sub 0.96}Li{sub 0.04}NbO{sub 3}, allowed us to correlate temperature evolution of relaxational frequency γ{sub R}(T) with the Nb-ion dynamics and showed its changes at freezing temperature and ferrielectric transition. - Abstract: Silver lithium niobates Ag{sub 1−x}Li{sub x}NbO{sub 3} are promising lead free piezoelectrics. Good quality Ag{sub 0.96}Li{sub 0.04}NbO{sub 3} ceramics were obtained. Dielectric and DSC studies showed that, in comparison to AgNbO{sub 3,} temperatures of phase transitions slightly decrease. Dielectric studies pointed to enhancement of polar properties. Remnant polarisations achieves value of 0.6 μC/cm{sup 2}. Maximum of ϵ(T) dependences related to the relaxor-like ferroelectric/ferrielectric M{sub 1}–M{sub 2} transition becomes higher and more frequency dependent. Analysis of Raman spectra showed that two modes at 50 and 194 cm{sup −1} exhibit significant softening. Low frequency part of the Raman spectra which involve central peak and soft mode were analysed using two models. CP was assumed as relaxational vibration and described by Debye function. The slope of temperature dependences of relaxational frequency γ{sub R}(T) changes at approximately 470 and 330 K, indicating that slowing down process of relaxational vibrations changes in the vicinity of partial freezing of Nb-ion dynamics T{sub f} and further freezing at ferroelectric/ferrielectric phase transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the enhancement of Er{sup 3+} diffusion in LiNbO{sub 3} crystals by Er{sup 3+}/Ti{sup 4+} co-diffusion

Highlights: • Enhancement of the diffusion of erbium ions (Er{sup 3+}) in lithium niobate crystals. • Incoherence on published results lead to need for systematic revision of literature. • Further insight into the topic of co-diffusion of Er{sup 3+}/Ti{sup 4+} ions into LiNbO{sub 3}. - Abstract: After carrying out a revision of the literature on the enhancement of Er{sup 3+} diffusion in LiNbO{sub 3} crystals by Er{sup 3+}/Ti{sup 4+} co-diffusion and analyzing our own experimental results, we conclude that no reproducible results were reported, meaning that further research on this subject is necessary.

36 MATERIALS SCIENCE↗

Structural and electrical properties of K{sub 3}Li{sub 2}Nb{sub 5}O{sub 15} thin film grown by pulsed laser deposition

Highlights: • (001)KLN tetragonal tungsten bronze thin film has been successfully deposited on MgO substrate using PLD. • Smooth and droplets-free surface has been obtained as evidenced by RHEED and AFM. • Impedance spectroscopy shows Debye type dielectric relaxation. • The ferroelectric character of the obtained (001)KLN film has been evidenced using capacitance voltage measurement. - Abstract: Potassium lithium niobate K{sub 3}Li{sub 2}Nb{sub 5}O{sub 15} (KLN) with tetragonal tungsten bronze-type structure (TTB) thin film was successfully deposited on MgO substrate by pulsed laser ablation method. The substrate was coated by a perovskite conductive layer of La{sub 0.5}Sr{sub 0.5}CoO{sub 3}. X-ray diffraction revealed (001) orientation with low mosaicity. The oriented film had smooth and droplets-free surface as evidenced by reflection high electron energy diffraction and atomic force microscopy. Using Pt top electrode, dielectric measurements indicated stable dielectric permittivity of about 400 up to 10{sup 5} Hz. A dielectric relaxation was also observed. Moreover, the capacitance voltage measurements of the obtained (001)KLN film show ferroelectric behavior. Our results provide useful insights into the growth of tetragonal tungsten and other complex materials. These results will be useful for the growth and integration of epitaxial TTB thin films on perovskite and Si substrates.

36 MATERIALS SCIENCE↗

Nuclear reactor radiation and temperature effects on piezoelectric surface acoustic wave devices

Surface acoustic wave (SAW) resonators were characterized in-situ in a nuclear reactor environment at high temperature. Devices based on lithium niobate (LiNbO 3 ), aluminum nitride (sc-AlN), and thin-film aluminum nitride on sapphire substrate (AlN/sapphire) were tested up to 400 °C temperature and 1.9 × 10 12 n/cm 2 s neutron flux. Shifts in device resonant frequency were detected in response to temperature and neutron flux. Devices undergo a frequency change when exposed to neutron flux. At 300 °C, AlN/sapphire produced the strongest neutron flux response about 1.02 ppm at 1.27 × 10 12 n/cm 2 s neutron flux (5.7 × 10 4 rad-Si/hr neutron dose rate), compared to 0.30 ppm for LiNbO 3 and 0.17 ppm for sc-AlN. While the transient kinetics in response to step change in neutron flux support the defect-accumulation mechanism, the concurrent measurement of device temperature using resistive temperature sensor suggests additional heating caused by absorption of gamma rays can also play a role. These results make SAW devices attractive candidates for sensor applications in extreme environments.

Aluminum nitride↗

Molecular dynamics simulation of seeded crystal growth in glass

The mechanism of non-congruent growth of a crystal from glass has been sought using molecular dynamics simulations. Specifically, as a model of this process, the growth of a lithium niobate (LiNbO 3 ) crystal seed sandwiched between two lithium niobosilicate (LNS) glass slabs has been simulated as a function of time and temperature. The growth of pre-existing crystal is strongly affected by the orientation of crystal seed, temperature, and the SiO 2 concentration in the surrounding LNS glass matrix. The orientation of LiNbO 3 seed surface that has inherently larger interplanar distance results in a relatively slower crystal growth. The addition of SiO 2 to LNS system significantly decreases the crystal growth, which primarily occurs in the region devoid of Si. The suppressive effect of SiO 2 on growth rate can be traced to the existence of defect complex comprising of Si substituted at the Nb site and a nearby Nb vacancy.

36 MATERIALS SCIENCE↗

Drive frequency dependent phase imaging in piezoresponse force microscopy

The drive frequency dependent piezoresponse (PR) phase signal in near-stoichiometric lithium niobate crystals is studied by piezoresponse force microscopy. It is clearly shown that the local and nonlocal electrostatic forces have a great contribution to the PR phase signal. The significant PR phase difference of the antiparallel domains are observed at the contact resonances, which is related to the electrostatic dominated electromechanical interactions of the cantilever and tip-sample system. Moreover, the modulation voltage induced frequency shift at higher eigenmodes could be attributed to the change of indention force depending on the modulation amplitude with a piezoelectric origin. The PR phase of the silicon wafer is also measured for comparison. It is certificated that the electrostatic interactions are universal in voltage modulated scanning probe microscopy and could be extended to other phase imaging techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric Properties Of Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}-PbTiO{sub 3} Solid Solution Synthesized By Solid State Reaction Route

Phase pure (1-x)Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}-x PbTiO{sub 3} ceramics near morphotrophic phase boundary (x = 0.35) are prepared by conventional solid state reaction route, by adding 2 mol.% MgO. The dielectric properties of lead indium niobate-lead titanate ceramic are studied as a function of both temperature and frequency. For this composition the dielectric constant for 100 Hz increases from 1944 at room temperature to 1510 at Curie temperature(304 deg. C). The saturation polarization, measured at room temperature, is found to be 23.9 {mu}C/cm{sup 2} for 40 kV/cm.

36 MATERIALS SCIENCE↗

Cascaded Cerenkov third-harmonic generation in random quadratic media

We investigate experimentally and theoretically the conical emission of Cerenkov-type third-harmonic generation in strontium barium niobate of random 2D-{chi}{sup (2)} distribution. The azimuthal intensity distribution is explained by the polarization properties of the fundamental and Cerenkov second-harmonic waves, depending on the cascaded origin of the generation process. Moreover, we show the role of the individual domain shape in an additional modulation on the conical emission, controlled by the electrical switching of the spontaneous polarization of the ferroelectric medium.

36 MATERIALS SCIENCE↗

Deposition of stress free c-axis oriented LiNbO{sub 3} thin film grown on (002) ZnO coated Si substrate

C-axis oriented lithium niobate thin films have been deposited on Si substrate using RF sputtering technique. A thin buffer layer of c-axis (002) oriented ZnO on Si substrate has been used as a nucleating layer to promote the growth of (006) oriented LiNbO{sub 3} film. The processing gas composition and pressure are found to be very critical in obtaining stress free LiNbO{sub 3} film having desired (006) orientation. The LiNbO{sub 3} films deposited under unique combination of sputtering pressure (10 mTorr) and argon percentage (80%) in reactive gas (Ar + O{sub 2}) composition become almost stress free having lattice parameter (1.3867 A) close to the bulk value. The observed variation in the structural properties and optical phonon modes observed by Raman spectroscopic studies of the oriented LiNbO{sub 3} thin film with stress has been correlated with growth kinetics.

36 MATERIALS SCIENCE↗

Single phase synthesis and room temperature neutron diffraction studies on multiferroic PbFe{sub 0.5}Nb{sub 0.5}O{sub 3}

The lead-iron-niobate, (PbFe{sub 0.5}Nb{sub 0.5}O{sub 3} or PFN) was synthesized by low temperature sintering Single Step / Solid State Reaction Method. The 700 Degree-Sign C/2 hrs. calcined powder was sintered at 1050 Degree-Sign C/1 hr. The sintered pellets were characterized through X-Ray Diffraction and Neutron Diffraction at room temperature. It is found from the XRD pattern that the materials is in single phase with no traces of pyrochlore phase. It was also confirmed from the neutron diffraction pattern, the structure of PFN to be monoclinic, space group Cm. Structural studies has been carried out by refining the obtained neutron diffraction data by Rietveld refinement method using Fullprof program. The neutron diffraction pattern at 300 K (room temperature) was selected to refine the structure. The lattice parameters obtained are; a = 5.6709 A, b = 5.6732 A, c = 4.0136 A, and {alpha}= 90, {beta}= 89.881, {gamma}= 90. The P-E measurements showed hysteretic behavior with high remnant polarization.

36 MATERIALS SCIENCE↗

Diffuse phase transition in Li{sub 0.12}Na{sub 0.88}NbO{sub 3} piezoelectric ceramics

The morphotropic phase boundary composition viz. lithium sodium niobate, Li{sub 0.12}Na{sub 0.88}NbO{sub 3}, (LNN-12) was prepared by conventional solid state reaction and sintering route. The temperature dependent permittivity response near transition temperature showed a diffused phase transition (DPT). The degree of diffuseness, {gamma}, using the modified Curie-Weiss law, was found to be 1.92, indicative of almost-complete diffuse phase transition. The planar coupling constant k{sub p}, and mechanical quality factor Q{sub m}, measured by resonance-antiresonance method, were 0.17 and 413 respectively. These parameter values make LNN-12 ceramic an attractive candidate for transducers applications.

36 MATERIALS SCIENCE↗

Kinetics of linear domains in LiNbO{sub 3} single crystals polarized by scanning probe microscopy

Growth and decay processes of linear domains in lithium niobate single crystals fabricated utilizing scanning probe microscopy were investigated. It is found that the initial configuration of linear domains is dependent on the fabrication parameters as scan velocity and voltage. The linear domains decay at the part where the domain width is small for two different processes. A comparison of critical stable domain size between dot and linear domains was carried out. The critical linear domain width is 0.7 times as large as the critical diameter of dot domain at the same sample thickness due to their smaller surface energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High temperature ultrasonic transducers for the generation of guided waves for non-destructive evaluation of pipes

Applications for non-destructive evaluation and structural health monitoring of steam generators require ultrasonic transducers capable of withstanding the high temperatures of the pipes and heat exchangers. These applications require a strong coupling of the transducer to the heat exchanger’s complex geometry at the elevated temperatures. Our objective is to use spray-on piezo-electrics for depositing comb transducers onto the curved surfaces. This paper shows results for composite transducers such as lead zirconate titanate/ bismuth titanate and bismuth titanate/ lithium niobate. The comb transducers were prepared by precision laser ablation. The feasibility of producing second harmonic waves in rods with these spay-on comb transducers was demonstrated and paves the way toward measuring material degradation early-on before crack initiation occurs.

42 ENGINEERING↗

On the nature of phase transitions in the tetragonal tungsten bronze GdK{sub 2}Nb{sub 5}O{sub 15} ceramics

Phase transitions in gadolinium potassium niobate GdK{sub 2}Nb{sub 5}O{sub 15} (GKN) ceramics have been investigated by x-ray diffraction, dielectric susceptibility, differential scanning calorimetry, and Raman scattering. The results of our complementary studies show that GKN exhibits two phase transitions at T{sub c1} = 238 °C and T{sub c2} = 375 °C attributed to the ferroelectric-antiferroelectric-paraelectric (FE-AFE-PE) phase transitions. According to the x-ray diffraction analysis, the FE and PE phases were refined in the polar P4bm and centrosymmetric P4/mbm space groups. For the intermediate phase, the structure is refined in the space group P4nc with doubling of the c unit cell parameter, which is compatible with an AFE phase. This result was confirmed by Raman spectroscopy since new low-frequency lines are activated in the AFE phase due to the Brillouin zone-folding effect, typical for the modulated phases. The presence of the AFE phase between the FE and PE phases and the complex nature of tetragonal tungsten bronze crystal structure can explain the large thermal hysteresis observed at the FE-AFE transition between heating and cooling cycle and the strong depression of the Curie-Weiss temperature T{sub 0}. The semi-phenomenological Ising-like model based on the obtained experimental data is proposed to account for the observed FE-AFE-PE transition sequence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗