Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Melting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Melting, reentrant ordering and peak effect for Wigner crystals with quenched and thermal disorder

Abstract We consider simulations of Wigner crystals in solid state systems interacting with random quenched disorder in the presence of thermal fluctuations. When quenched disorder is absent, there is a well defined melting temperature determined by the proliferation of topological defects, while for zero temperature, there is a critical quenched disorder strength above which topological defects proliferate. When both thermal and quenched disorder are present, these effects compete, and the thermal fluctuations can reduce the effectiveness of the quenched disorder, leading to a reentrant ordered phase in agreement with the predictions of Nelson (1983 Phys. Rev. B 27 2902–14). There are two competing theories for the low temperature behavior, and our simulations show that both capture aspects of the actual response. The critical disorder strength separating ordered from disordered states remains finite as the temperature goes to zero, as predicted by Cha and Fertig (1995 Phys. Rev. Lett. 74 4867–70), instead of dropping to zero as predicted by Nelson. At the same time, the critical disorder strength decreases with decreasing temperature, as predicted by Nelson, instead of remaining constant, as predicted by Cha and Fertig. The onset of the reentrant phase can be deduced based on changes in the transport response, where the reentrant ordering appears as an increase in the mobility or the occurrence of a depinning transition. We also find that when the system is in the ordered state and thermally melts, there is an increase in the effective damping or pinning. This produces a drop in the electron mobility that is similar to the peak effect phenomenon found in superconducting vortices, where thermal effects soften the lattice or break down its elasticity, allowing the particles to better adjust their positions to take full advantage of the quenched disorder.

36 MATERIALS SCIENCE↗

Cryo-EM structure of AAV2 Rep68 bound to integration site AAVS1: insights into the mechanism of DNA melting

Abstract The Rep68 protein from Adeno-Associated Virus (AAV) is a multifunctional SF3 helicase that performs most of the DNA transactions necessary for the viral life cycle. During AAV DNA replication, Rep68 assembles at the origin of replication, catalyzing the DNA melting and nicking reactions during the hairpin rolling replication process to complete the second-strand synthesis of the AAV genome. We report the cryo-electron microscopy structures of Rep68 bound to the adeno-associated virus integration site 1 in different nucleotide-bound states. In the nucleotide-free state, Rep68 forms a heptameric complex around DNA, with three origin-binding domains (OBDs) bound to the Rep-binding element sequence, while three remaining OBDs form transient dimers with them. The AAA+ domains form an open ring without interactions between subunits and DNA. We hypothesize that the heptameric structure is crucial for loading Rep68 onto double-stranded DNA. The ATPγS complex shows that only three subunits associate with the nucleotide, leading to a conformational change that promotes the formation of both intersubunit and DNA interactions. Moreover, three phenylalanine residues in the AAA+ domain induce a steric distortion in the DNA. Our study provides insights into how an SF3 helicase assembles on DNA and provides insights into the DNA melting process.

Jaiswal, Rahul↗

Melting of spatially modulated phases at domain wall/surface junctions in antiferrodistortive multiferroics

A physical understanding of the nature of spatially modulated phases (SMPs) in rare-earth-doped antiferrodistortive (AFD) multiferroics and how they behave close to surfaces and interfaces is lacking. Here the emergence of the antiferroelectric (AFE), ferroelectric (FE), or ferrielectric (AFE-FE) spatial modulation in the vicinity of the morphotropic phase transition in La x Bi 1 – x Fe O 3 ( x ~ 0.2 ) is explored on the atomic level using high-resolution scanning transmission electron microscopy (HRSTEM). The suppression, or “melting,” of the AFE-type SMP in the vicinity of the AFD twin wall/surface junction is revealed by HRSTEM in La 0.22 Bi 0.78 Fe O 3 films and explained by the hybrid approach combining Landau-Ginzburg-Devonshire (LGD) phenomenology and the semimicroscopic four-sublattice model (FSM). The LGD-FSM approach reduces the problem of AFE (or AFE-FE) SMP emergence and stability to the thermodynamic analysis of the free-energy functional with AFE, FE, and AFD long-range order parameters and two master parameters: the FE-AFE coupling strength between four neighboring A sites and the nonstoichiometry factor, which are proportional to the variations of La concentration in La x Bi 1 – x Fe O 3 films. Finally, we establish that the surface-induced melting of SMPs and the associated broadening of AFE AFD domain walls minimize the film free energy under certain conditions imposed on the master parameters and gradient energy below the critical value. The observed behavior provides insight into the origin of SMPs in AFD multiferroics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sound speed measurements in silver shock compressed to 300 GPa: Solid-state transition, melting, and liquid-state response

To gain insight into the thermodynamic response of shock compressed Ag states corresponding to the face-centered-cubic (fcc) to body-centered-cubic (bcc) transformation and melting observed using in-situ x-ray diffraction (XRD) measurements, we present longitudinal sound speed results and their analysis in Ag at peak stresses ranging from 60 to 300 GPa. The measured sound speeds increased linearly with density compression to 171 GPa, showing that the sound speeds (and longitudinal moduli) in the fcc and bcc phases are very similar. Between 171 and 218 GPa, the sound speed dropped significantly, consistent with the melting reported using XRD measurements in shock compressed Ag. From 218 to 300 GPa, the increasing sound speeds and Hugoniot states provide a determination of the liquid phase Ag response. In particular, determination of the Grüneisen parameter (Γ) showed that the density – Grüneisen parameter product (ρΓ) for liquid Ag is constant, but differs significantly from that for solid Ag at ambient conditions. Furthermore, the Mie- Grüneisen equation of state can be used to describe the Hugoniot and off-Hugoniot response of liquid Ag.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic structure and melting of Ni and Fe 36 Ni up to 400 GPa

Iron, nickel and its alloys are critically important materials for industrial and technological applications due to their unique magnetic properties, strength, and thermal expansion. In this study, lasers were used to compress and heat Fe 36 Ni alloy (36 wt% Ni) and pure nickel up to the melting temperature using a combination of shock and ramp compression. The structure was measured using nanosecond in-situ x-ray diffraction, and simultaneous velocimetry was used to measure the pressure up to 454 GPa. A mixed face-centered-cubic (fcc) solid–liquid phase in Fe 36 Ni at 311 GPa provides experimental evidence that, compared to pure iron, the incorporation of nickel expands the stability field of the fcc phase to the melting curve. At lower temperatures, a mixed fcc and hexagonal-close-packed (hcp) phase is observed in ramp-compressed Fe 36 Ni at 278 GPa. At the higher compressions, a structure inconsistent with fcc, hcp, and body-centered cubic (bcc) is observed. In the case of pure Ni, the fcc phase is stable under ramp compression up to 402 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shock-driven amorphization and melting in Fe 2 O 3

We present measurements on Fe 2⁢ O 3 amorphization and melt under laser-driven shock compression up to 209(10) GPa via time-resolved in situ x-ray diffraction. At 122(3) GPa, a diffuse signal is observed indicating the presence of a noncrystalline phase. Structure factors have been extracted up to 182(6) GPa showing the presence of two well-defined peaks. A rapid change in the intensity ratio of the two peaks is identified between 145(12) and 151(12) GPa, indicative of a phase change. The noncrystalline diffuse scattering is consistent with shock amorphization of Fe 2 ⁢O 3 between 122(3) and 145(12) GPa, followed by an amorphous-to-liquid transition above 151(12) GPa. Upon release, a noncrystalline phase is observed alongside crystalline α–Fe 2⁢ O 3 . The extracted structure factor and pair distribution function of this release phase resemble those reported for Fe 2 ⁢O 3 melt at ambient pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal and Quantum Melting Phase Diagrams for a Magnetic-Field-Induced Wigner Solid

A sufficiently large perpendicular magnetic field quenches the kinetic (Fermi) energy of an interacting two-dimensional (2D) system of fermions, making them susceptible to the formation of a Wigner solid (WS) phase in which the charged carriers organize themselves in a periodic array in order to minimize their Coulomb repulsion energy. In low-disorder 2D electron systems confined to modulation-doped GaAs heterostructures, signatures of a magnetic-field-induced WS appear at low temperatures and very small Landau level filling factors ($\textit{ν}$ ≃ 1/5). In dilute GaAs 2D hole systems, on the other hand, thanks to the larger hole effective mass and the ensuing Landau level mixing, the WS forms at relatively higher fillings ($\textit{ν}$ ≃ 1/3). Here we report our measurements of the fundamental temperature vs filling phase diagram for the 2D holes’ WS-liquid thermal melting. Moreover, via changing the 2D hole density, we also probe their Landau level mixing vs filling WS-liquid quantum melting phase diagram. In this work, we find our data to be in good agreement with the results of very recent calculations, although intriguing subtleties remain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanosecond Structural Dynamics during Electrical Melting of Charge Density Waves in 1⁢T-TaS 2

Electrical control of charge density waves has been of immense interest, as the strong underlying electron-lattice interactions potentially open new, efficient pathways for manipulating their ordering and, consequently, their electronic properties. However, the transition mechanisms are often unclear as electric field, current, carrier injection, heat, and strain can all contribute and play varying roles across length scales and timescales. Here, we provide insight on how electrical stimulation melts the room temperature charge density wave order in 1T-TaS 2 by visualizing the atomic and mesoscopic structural dynamics from quasistatic to nanosecond pulsed melting. Using a newly developed ultrafast electron microscope setup with electrical stimulation, we reveal the order and strain dynamics during voltage pulses as short as 20 ns. The order parameter dynamics across a range of pulse amplitudes and durations support a thermally driven mechanism even for fields as high as 19 kV cm -1 . In addition, time-resolved imaging reveals a heterogeneous, mesoscopic strain response across the flake, including MHz-scale acoustic resonances that emerge during sufficiently short pulsed excitation which may modulate the order. In conclusion, these results suggest that metallic charge density wave phases like studied here may be more robust to electronic switching pathways than insulating ones, motivating further investigations at higher fields and currents in this and other related systems.

36 MATERIALS SCIENCE↗

Towards string order melting of spin-1 particle chains in superconducting transmons using optimal control

Utilizing optimal control to simulate a model Hamiltonian is an emerging strategy that leverages the intrinsic physics of a device with digital quantum simulation methods. Here we evaluate optimal control for probing the nonequilibrium properties of symmetry-protected topological (SPT) states simulated with superconducting hardware. Assuming a tunable transmon architecture, we cast the evolution of these SPT states as a series of one- and two-site pulse optimization problems that are solved in the presence of leakage constraints. From the generated pulses, we classically simulate the time-dependent melting of the perturbed SPT string order across a six-site model with an average state infidelity of 10 -3 . The feasibility of these pulses as well as their efficient application indicate that high-fidelity simulations of string order melting are within reach of current quantum computing systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Depinning, melting, and sliding of generalized Wigner crystals in Moiré systems

We numerically examine the depinning, sliding, and melting of commensurate and incommensurate Wigner crystals on two-dimensional hexagonal periodic substrates near fillings of 1 / 3 , 1 / 2 , and 2 / 3 to model the dynamics of generalized Wigner crystals in moiré heterostructures. At low temperatures where thermal fluctuations are irrelevant, for commensurate fillings we find a strongly pinned state that depins into a sliding crystal, while at incommensurate fillings the depinning threshold is strongly reduced. For fillings below 1 / 2 , the depinning occurs in a two-step process. Above the first depinning threshold, there is an extended range of drives where the conduction occurs via the sliding of antikinks along the charge stripes, followed by a second threshold where all the charges begin to slide. At finite temperatures, the external driving reduces the effective melting temperature at commensurate fillings and enhances creep at incommensurate fillings. We show that depinning into different sliding states, such as moving fluids or moving crystals, produces nonlinear features in the transport curves. We also show that transport is asymmetric on either side of a commensurate filling due to the different dynamics for interstitials versus holes in the commensurate structure. A variety of sliding states should be accessible for generalized Wigner crystals at finite temperatures even for low drives. If experiments can realize sliding dynamics in moiré systems, it would open another class of commensurate and incommensurate phases for study. Additionally, the sliding dynamics and antikink flow could provide unique functionalities for charge transport in moiré heterostructures. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Light-Induced Melting of Competing Stripe Orders without Introducing Superconductivity in La 2 − x Ba x CuO 4

The ultrafast manipulation of quantum material has led to many novel and significant discoveries. Among them, the light-induced transient superconductivity in cuprates achieved by melting competing stripe orders represents a highly appealing accomplishment. However, recent investigations have shown that the notion of photoinduced superconductivity remains a topic of controversy, and its elucidation solely through c -axis time-resolved terahertz spectroscopy remains an arduous task. Here, we measure the in-plane and out-of-plane transient terahertz responses simultaneously in the stripe-ordered nonsuperconducting La 2 − x Ba x CuO 4 after near-infrared excitations. We find that although a pump-induced reflectivity edge appears in the c -axis reflectance spectrum, the reflectivity along the CuO 2 planes decreases simultaneously, indicating an enhancement in the scattering rate of quasiparticles. This in-plane transient response is clearly distinct from the features associated with superconducting condensation. Therefore, we conclude the out-of-plane transient responses cannot be explained by an equivalent of Josephson tunneling. Notably, those pump-induced terahertz responses remain consistent even when we vary the near-infrared optical pump wavelengths and hole concentrations. Our results provide critical evidence that transient three-dimensional superconductivity cannot be induced by melting the competing stripe orders with pump pulses whose photon energy is much higher than the superconducting gap of cuprates. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗

Investigations Towards Ultra-Low Cost Nb 3 Sn SRF Fabrication via Melt Casted Bronze Route Processing

Here, a novel approach to fabricating Nb 3 Sn SRF cavities and other RF components using an ultra-low-cost melt casting fabrication process has been investigated. This simple, low cost melt casting technique has the potential to be used to fabricate nearly any superconducting Nb3Sn structure using either the Bronze Route (BR), Internal Tin (IT), External Tin (ET) processes as well as normal conducting pure copper (Cu) cavities. Most of the heat treated samples that were examined using SEM/EDX seemed to show a reasonable correlation of T c onset and transition width (ΔT c ) of the ingots initial/starting Sn content to the desired stoichiometric Nb 3 Sn phase, where the lower starting Sn content coupons resulted in lower T c 's with broader transition widths and the higher starting Sn coupons resulted in higher T c 's with narrower ΔT c ’s. The best samples had T c onsets ~17-18 K and ΔT c 's < 2 K. Two samples were further tested for RF surface resistance (R s ) and Quality Factor (Q) at JLAB. Here, these RF measurements were performed at 7.4 GHz using a calorimetric technique and showed two transitions, one at ~ 8 K and another at ~ 14 K; values of R s were at least two orders of magnitude higher than similar high quality Nb 3 Sn films directly deposited substrates by JLAB and with another superconducting transition close to the superconducting transition temperature of niobium. Substantial improvements in the processing variables ranging from higher quality of the initial ingots with higher Sn content, to better electropolishing and reaction heat treatment regimens will be necessary to realize improved RF performance metrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conversion kinetics of container glass batch melting

Abstract Understanding the batch‐to‐glass conversion process is fundamental to optimizing the performance of glass‐melting furnaces and ensuring that furnace modeling can correctly predict the observed outcome when batch materials or furnace conditions change. To investigate the kinetics of silica dissolution, gas evolution, and primary foam formation and collapse, we performed X‐ray diffraction, thermal gravimetry, feed expansion tests, and evolved gas analysis of batch samples heated at several constant heating rates. We found that gas evolving reactions, foaming, and silica dissolution depend on the thermal history of the batch in a similar manner: the kinetic parameters of each process were linear functions of the square root of the heating rate. This kinetic similarity reflects the stronger‐than‐expected interdependence of these processes. On the basis of our results, we suggest that changes in furnace operating conditions, such as firing or boosting, influence the melting rate less than what one would expect without consideration of batch conversion kinetics.

Ueda, Nanako↗

Melting point of group IV and V transition metal diborides

The environmental conical nozzle levitator system enables cooling trace experiments above 4000 K. These cooling trace experiments were used to determine the melting points through observation of thermal arrest of group IV and V transition metal diborides (TiB 2 , T m = 3313 ± 33 K; ZrB 2 , T m = 3404 ± 38 K; HfB 2 , T m = 3529 ± 33 K; and TaB 2 , T m = 3284 ± 10 K; note: mean ± 2 standard error). Temperature measurements were conducted utilizing dual single-color pyrometers at wavelengths of 0.9 and 0.65 µm. This system utilizes aerodynamic levitation and dual laser heating to achieve temperatures approaching 4000 K. The samples were synthesized from commercial powders using ceramic gel-casting to produce high-density spherical components. The measurements obtained were compared to previously reported melting temperature values and were generally found to be in agreement with most of the published values.

Materials science↗

Data-Driven Approaches for Bead Geometry Prediction Via Melt Pool Monitoring

In the realm of additive manufacturing, the selection of process parameters to avoid over and under deposition entails a time-consuming and resource-intensive trial-and-error approach. Given the distinct characteristics of each part geometry, there is a pressing need for advancing real-time process monitoring and control to ensure consistent and reliable part dimensional accuracy. Here, this research shows that support vector regression (SVR) and convolutional neural network (CNN) models offer a promising solution for real-time process control due to the models’ abilities to recognize complex, non-linear patterns with high accuracy. A novel experiment was designed to compare the performance of SVR and CNN models to indirectly detect bead height from a coaxial image of a melt pool from a single-layer, single bead build. The study showed that both SVR and CNN models trained on melt pool data collected from a coaxial optical camera can accurately predict the bead height with a mean absolute percentage error of 3.67% and 3.68%, respectively.

36 MATERIALS SCIENCE↗

Vaporizable endoskeletal droplets via tunable interfacial melting transitions

Liquid emulsion droplet evaporation is of importance for various sensing and imaging applications. The liquid-to-gas phase transformation is typically triggered thermally or acoustically by low–boiling point liquids, or by inclusion of solid structures that pin the vapor/liquid contact line to facilitate heterogeneous nucleation. However, these approaches lack precise tunability in vaporization behavior. Here, we describe a previously unused approach to control vaporization behavior through an endoskeleton that can melt and blend into the liquid core to either enhance or disrupt cohesive intermolecular forces. This effect is demonstrated using perfluoropentane (C 5 F 12 ) droplets encapsulating a fluorocarbon (FC) or hydrocarbon (HC) endoskeleton. FC skeletons inhibit vaporization, whereas HC skeletons trigger vaporization near the rotator melting transition. Our findings highlight the importance of skeletal interfacial mixing for initiating droplet vaporization. Tuning molecular interactions between the endoskeleton and droplet phase is generalizable for achieving emulsion or other secondary phase transitions, in emulsions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Protecting ice from melting under sunlight via radiative cooling

As ice plays a critical role in various aspects of life, from food preservation to ice sports and ecosystem, it is desirable to protect ice from melting, especially under sunlight. The fundamental reason for ice melt under sunlight is related to the imbalanced energy flows of the incoming sunlight and outgoing thermal radiation. Therefore, radiative cooling, which can balance the energy flows without energy consumption, offers a sustainable approach for ice protection. Here, we demonstrate that a hierarchically designed radiative cooling film based on abundant and eco-friendly cellulose acetate molecules versatilely provides effective and passive protection to various forms/scales of ice under sunlight. This work provides inspiration for developing an effective, scalable, and sustainable route for preserving ice and other critical elements of ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Critical instability at moving keyhole tip generates porosity in laser melting

Laser powder bed fusion is a dominant metal 3D printing technology. However, porosity defects remain a challenge for fatigue-sensitive applications. Some porosity is associated with deep and narrow vapor depressions called keyholes, which occur under high-power, low–scan speed laser melting conditions. High-speed x-ray imaging enables operando observation of the detailed formation process of pores in Ti-6Al-4V caused by a critical instability at the keyhole tip. We found that the boundary of the keyhole porosity regime in power-velocity space is sharp and smooth, varying only slightly between the bare plate and powder bed. The critical keyhole instability generates acoustic waves in the melt pool that provide additional yet vital driving force for the pores near the keyhole tip to move away from the keyhole and become trapped as defects.

47 OTHER INSTRUMENTATION↗