Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Charge-transfer-enhanced d – d emission in antiferromagnetic NiPS3

The d electron plays a significant role in determining and controlling the properties of magnetic materials. However, the d electron transitions, especially d–d emission, have rarely been observed in magnetic materials due to the forbidden selection rules. Here, we report an observation of d–d emission in antiferromagnetic nickel phosphorus trisulfides (NiPS3) and its strong enhancement by stacking it with monolayer tungsten disulfide (WS2). We attribute the observation of the strong d–d emission enhancement to the charge transfer between NiPS3 and WS2 in the type-I heterostructure. The d–d emission peak splits into two peaks, D1 and D2, at low temperature below 150 K, from where an energy splitting due to the trigonal crystal field is measured as 105 meV. Moreover, we find that the d–d emissions in NiPS3 are nonpolarized lights, showing no dependence on the zigzag antiferromagnetic configuration. These results reveal rich fundamental information on the electronic and optical properties of emerging van der Waals antiferromagnetic NiPS3.

Physics↗

Single‐Domain Multiferroic Array‐Addressable Terfenol‐D (SMArT) Micromagnets for Programmable Single‐Cell Capture and Release

Abstract Programming magnetic fields with microscale control can enable automation at the scale of single cells ≈10 µm. Most magnetic materials provide a consistent magnetic field over time but the direction or field strength at the microscale is not easily modulated. However, magnetostrictive materials, when coupled with ferroelectric material (i.e., strain‐mediated multiferroics), can undergo magnetization reorientation due to voltage‐induced strain, promising refined control of magnetization at the micrometer‐scale. This work demonstrates the largest single‐domain microstructures (20 µm) of Terfenol‐D (Tb 0.3 Dy 0.7 Fe 1.92 ), a material that has the highest magnetostrictive strain of any known soft magnetoelastic material. These Terfenol‐D microstructures enable controlled localization of magnetic beads with sub‐micrometer precision. Magnetically labeled cells are captured by the field gradients generated from the single‐domain microstructures without an external magnetic field. The magnetic state on these microstructures is switched through voltage‐induced strain, as a result of the strain‐mediated converse magnetoelectric effect, to release individual cells using a multiferroic approach. These electronically addressable micromagnets pave the way for parallelized multiferroics‐based single‐cell sorting under digital control for biotechnology applications.

Khojah, Reem↗

Phase stability and magnetic and electronic properties of a spark plasma sintered CoFe – P soft magnetic alloy

More efficient power conversion devices are able to transmit greater electrical power across larger distances to satisfy growing global electrical needs. A critical requirement to achieve more efficient power conversion are the soft magnetic materials used as core materials in transformers, inductors, and motors. To that effect it is well known that the use of non-equilibrium microstructures, which are, for example, nanocrystalline or consist of single phase solid solutions, can yield high saturation magnetic polarization and high electrical resistivity necessary for more efficient soft magnetic materials. In this work, we synthesized CoFe – P soft magnetic alloys containing nanocrystalline, single phase solid solution microstructures and studied the effect of a secondary intermetallic phase on the saturation magnetic polarization and electrical resistivity of the consolidated alloy. Single phase solid solution CoFe – P alloys were prepared through mechanically alloying metal powders and phase decomposition was observed after subsequent consolidation via spark plasma sintering (SPS) at various temperatures. The secondary intermetallic phase was identified as the orthorhombic (Co x Fe 1-x ) 2 P phase and the magnetic properties of the (Co x Fe 1-x ) 2 P intermetallic phase were found to be detrimental to the soft magnetic properties of the targeted CoFe – P alloy.

36 MATERIALS SCIENCE↗

Linear magnetoconductivity as a probe of time-reversal symmetry breaking

Several optical experiments have shown that in magnetic materials, the principal axes of response tensors can rotate as an odd function of an applied magnetic field. Here we offer a microscopic explanation of this effect, and we propose a closely related dc transport phenomenon—an off-diagonal symmetric conductivity, linear and odd in a magnetic field, which we refer to as linear magnetoconductivity (LMC). Although LMC has the same functional dependence on a magnetic field as the Hall effect, its origin is fundamentally different: LMC requires time-reversal symmetry to be broken even before a magnetic field is applied, and is therefore a sensitive probe of magnetism. We demonstrate LMC in three different ways: via a tight-binding toy model, a density functional theory calculation on MnPSe3, and a semiclassical treatment. The third approach identifies two distinct mechanisms yielding LMC: momentum-dependent band magnetization and Berry curvature. Finally, we propose an experimental geometry suitable for detecting LMC, and we demonstrate its applicability using Landauer-Büttiker simulations. Our results emphasize the importance of measuring the full conductivity tensor in magnetic materials, and they introduce LMC as a new transport probe of symmetry.

Sunko, V↗

Magnetic properties of Ni nanoparticles embedded in silica matrix (KIT-6) synthesized via novel chemical route

Thermally stable Ni nanoparticles have been embedded in mesoporous silica matrix (KIT-6) via novel chemical reduction method by using superhydride as reducing agent. X-ray diffraction (XRD) study confirms that pure and embedded Ni nanoparticles crystallize in face centered cubic (fcc) structure. Crystallite sizes of pure Ni, 4 wt% and 8 wt% Ni in silica were estimated to be 6.0 nm, 10.4 nm and 10.5 nm, respectively. Morphology and dispersion of Ni in silica matrix were studied by scanning electron microscopy (SEM). Magnetic study shows enhancement of magnetic moments of Ni nanoparticles embedded in silica matrix compared with that of pure Ni. The result has been interpreted on the basis of size reduction and magnetic exchange effects. Saturation magnetization values for pure Ni, 4 wt% and 8 wt% Ni in silica were found to be 15.77 emu/g, 5.08 emu/g and 2.00 emu/g whereas coercivity values were 33.72 Oe, 92.47 Oe and 64.70 Oe, respectively. We anticipate that the observed magnetic properties may find application as soft magnetic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly Enhanced Curie Temperature in Ga-Implanted Fe3GeTe2 van der Waals Material

Among many efforts in the research of van der Waals (vdW) magnetic materials, increasing the Curie temperature above room temperature has been at the center of research in developing spintronics technology using vdW materials. Here an effective and reliable method of increasing the Curie temperature of ferromagnetic Fe3GeTe2 vdW materials by Ga implantation is reported. It is found that implanting Ga into Fe3GeTe2 by the amount of 10-3 Ga Å-3 could greatly enhance the Fe3GeTe2 Curie temperature by almost 100%. Spatially resolved microdiffraction and element-resolved X-ray absorption spectroscopy show little changes in the Fe3GeTe2 crystal structure and Fe valence state. In addition, the Ga implantation changes the Fe3GeTe2 magnetization from out-of-plane direction at low temperature to in-plane direction at high temperature. The result opens a new opportunity for tailoring the magnetic properties of vdW materials beyond room temperature.

Yang, M↗

Mechanical and electrical properties of low temperature phase MnBi

Low temperature phase (LTP) manganese bismuth (MnBi) is a promising rare-earth-free permanent magnet material due to its high intrinsic coercivity and large positive temperature coefficient. While scientists are making progress on fabricating bulk MnBi magnets, engineers have begun considering MnBi magnets for motor applications. Physical properties other than magnetic ones could significantly affect motor design. Here, we report results of our investigation on the mechanical and electrical properties of bulk LTP MnBi and their temperature dependence. A MnBi ingot was prepared using an arc melting technique and subsequently underwent grinding, sieving, heat treatment, and cryomilling. The resultant powders with a particle size of ∼5 μm were magnetically aligned, cold pressed, and sintered at a predefined temperature. Micro-hardness testing was performed on a part of original ingot and we found that the hardness of MnBi was 109 ± 15 HV. The sintered magnets were subjected to compressive testing at different temperatures and it was observed that a sintered MnBi magnet fractured when the compressive stress exceeded 193 MPa at room temperature. Impedance spectra were obtained using electrochemical impedance spectroscopy at various temperatures and we found that the electrical resistance of MnBi at room temperature was about 6.85 μΩ m.

Jiang, Xiujuan↗

Internal defect detection and characterization of samarium-cobalt sintered magnets by ultrasonic testing technique

Excessive quantities of samarium-cobalt (Sm-Co) magnet material are being scrapped needlessly due to a lack of understanding of inhomogeneity distribution and unacceptable internal defects. If there is a way to identify, locate, characterize and when needed separate the defective portions of magnet material, utilization can be increased and product quality improved. Further, the magnets’ magnetic and mechanical performance can be improved by reducing the occurrence of internal defects. This paper reports on a cost-effective and efficient nondestructive evaluation method based on an ultrasonic testing (UT) technique applied for detecting and characterizing internal defects in Sm-Co sintered magnets. Applying the UT technique will allow users to comprehensively analyze internal defects, such as inclusions, porosity, microcracks, and other structural irregularities, check for homogeneity and anomalous regions and give the locations of these internal anomalies and defects within the Sm-Co sintered magnets. The UT technique can also be applied to other rare-earth permanent magnets, such as sintered or die-upset neodymium-iron-boron (Nd-Fe-B) magnets. The UT technique can effectively guide quality control and acceptable product selection, in addition to optimizing the magnet alloy design and production processes. Therefore, it can facilitate the improvement of magnet manufacturing efficiency and machinability, reduce scrap, prolong service life, increase the use of what would be post-production waste, and enhance product reuse and recycling at end-of-life disposition.

36 MATERIALS SCIENCE↗

Research & Development on Superconducting Niobium Materials via Magnetic Measurements

We present a study of superconducting properties of both large grain (1 mm average grain size) and small grain (50 micron average grain size) Niobium materials containing varying amounts of Tantalum impurities that have been used in the fabrication of high accelerating gradient superconducting radio frequency cavities. We found that a buffered chemical polishing of these Niobium samples causes a distinct reduction in the superconducting parameters like TC, wt- ppm to 1300 wt-ppm. Implications of these results on the performance of niobium superconducting radio frequency cavities are discussed, especially the anomalous high field RF losses that have been reported in the literature.

36 MATERIALS SCIENCE↗

Magnetic tunnel junctions with voltage tunable interlayer coupling for memory and sensor applications

Various examples are provided for magnetic tunnel junctions and applications thereof. In one example, a magnetic tunnel junction (MTJ) device includes a first ferromagnetic (FM) layer; a gadolinium oxide (GdOX) tunnel barrier disposed on the first ferromagnetic layer; and a second FM layer disposed on the GdOX tunnel barrier. In another example, a perpendicular MTJ (pMTJ) device includes a first layer including a magnetic material; a tunnel barrier disposed on the first layer to form the pMTJ; and a second layer including the magnetic material, the second layer disposed on the tunnel barrier.

Wang, Weigang↗

Accurate machine-learning predictions of coercivity in high-performance permanent magnets

Increased demand for high-performance permanent magnets in the electric vehicle and wind-turbine industries has prompted the search for cost-effective alternatives. Discovering magnetic materials with the desired intrinsic and extrinsic permanent magnet properties presents a significant challenge to researchers because of issues with the global supply of rare-earth elements, material stability, and a low maximum magnetic energy product BH max . While first-principles density functional theory (DFT) predicts materials’ magnetic moments, magnetocrystalline anisotropy constants, and exchange interactions, it cannot compute extrinsic properties such as coercivity (H c ). Although it is possible to calculate H c theoretically with micromagnetic simulations, the predicted value is larger than the experiment by almost an order of magnitude due to the Brown paradox. To circumvent these issues, we employ machine-learning (ML) methods on an extensive database obtained from experiments, DFT calculations, and micromagnetic modeling. The use of a large experimental dataset enables realistic H c predictions for materials such as Ce-doped Nd 2 ⁢Fe 14 ⁢B, comparing favorably against micromagnetically simulated coercivities. Remarkably, our ML model accurately identifies uniaxial magneto-crystalline anisotropy as the primary contributor to H c . With DFT calculations, we predict the Nd-site-dependent magnetic anisotropy behavior in Nd 2 ⁢Fe 14 ⁢B, confirming that Nd 4⁢g sites mainly contribute to uniaxial magnetocrystalline anisotropy, and also calculate the Curie temperature (T c ). Finally, both calculated results are in good agreement with the experiments. The coupled experimental dataset and ML modeling with DFT input predict H c with far greater accuracy and speed than was previously possible using micromagnetic modeling. Further, we reverse engineer the grain-boundary and intergrain exchange coupling with micromagnetic simulations by employing the ML predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thin-film encapsulation of the air-sensitive organic-based ferrimagnet vanadium tetracyanoethylene

The organic-based ferrimagnet vanadium tetracyanoethylene (V[TCNE]{sub x∼2}) has demonstrated potential for use in both microwave electronics and spintronics due to the combination of high temperature magnetic ordering (T{sub C} > 600 K), extremely sharp ferromagnetic resonance (peak to peak linewidth of 1 G), and low-temperature conformal deposition via chemical vapor deposition (deposition temperature of 50 °C). However, air-sensitivity leads to the complete degradation of the films within 2 h under ambient conditions, with noticeable degradation occurring within 30 min. Here, we demonstrate encapsulation of V[TCNE]{sub x∼2} thin films using a UV-cured epoxy that increases film lifetime to over 710 h (30 days) as measured by the remanent magnetization. The saturation magnetization and Curie temperature decay more slowly than the remanence, and the coercivity is unchanged after 340 h (14 days) of air exposure. Fourier transform infrared spectroscopy indicates that the epoxy does not react with the film, and magnetometry measurements show that the presence of the epoxy does not degrade the magnetic properties. This encapsulation strategy directly enables a host of experimental protocols and investigations not previously feasible for air-sensitive samples and lays the foundation for the development of practical applications for this promising organic-based magnetic material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Morphotropic phase boundary and magnetoelastic behaviour in ferromagnetic Tb 1-x Gd x Fe 2 system

Morphotropic phase boundary (MPB), separating two ferroic phases of different crystal symmetries, has been studied extensively for its extraordinary enhancement of piezoelectricity in ferroelectrics. Based on the same mechanism, we have designed a magnetic MPB in the pseudobinary ferromagnetic system of Tb 1-x Gd x Fe 2 and the corresponding crystal structure, magnetic properties, and magnetostriction are explored. With the synchrotron x-ray diffractometry, the structure symmetry of TbFe 2 -rich compositions is detected to be rhombohedral (R) and that of GdFe 2 -rich compositions is tetragonal (T) below T c . With the change of concentration, the value of magnetostriction of the samples changes monotonously, while the MPB composition Tb 0.1 Gd 0.9 Fe 2 , which corresponds to the coexistence of R and T phases, exhibits the maximum magnetization among all available compositions and superposition of magnetostriction behaviour of R and T phases. Furthermore, our result of MPB phenomena in ferromagnets may provide an effective route to design functional magnetic materials with exotic properties.

36 MATERIALS SCIENCE↗

A Brownian dynamics study on ferrofluid colloidal dispersions using an iterative constraint method to satisfy Maxwell’s equations

Ferrofluids are often favored for their ability to be remotely positioned via external magnetic fields. The behavior of particles in ferromagnetic clusters under uniformly applied magnetic fields has been computationally simulated using the Brownian dynamics, Stokesian dynamics, and Monte Carlo methods. However, few methods have been established that effectively handle the basic principles of magnetic materials, namely, Maxwell’s equations. An iterative constraint method was developed to satisfy Maxwell’s equations when a uniform magnetic field is imposed on ferrofluids in a heterogeneous Brownian dynamics simulation that examines the impact of ferromagnetic clusters in a mesoscale particle collection. This was accomplished by allowing a particulate system in a simple shear flow to advance by a time step under a uniformly applied magnetic field, then adjusting the ferroparticles via an iterative constraint method applied over sub-volume length scales until Maxwell’s equations were satisfied. The resultant ferrofluid model with constraints demonstrates that the magnetoviscosity contribution is not as substantial when compared to homogeneous simulations that assume the material’s magnetism is a direct response to the external magnetic field. This was detected across varying intensities of particle-particle interaction, Brownian motion, and shear flow. Ferroparticle aggregation was still extensively present but less so than typically observed.

42 ENGINEERING↗

Temperature and concentration dependent magnetic properties of epitaxial Fe{sub 1−x}Cr{sub x}-alloy films in the high Cr-concentration regime

Soft magnetic materials with a Curie temperature (T{sub c}) close to room temperature are suitable candidates for device applications and for more fundamental aspects of magnetism. Promising candidates are Fe{sub 1−x}Cr{sub x}-alloys with a Fe concentration of about 25%–35%. We have grown by molecular beam epitaxy methods a number of epitaxial Fe{sub 1−x}Cr{sub x} alloys on MgO[100] and MgO[110] substrates, and we report on their structural and magnetic properties in this concentration range, including the dependence of the Curie temperature (T{sub c}) on the concentration, the magnetocrystalline anisotropy, and the development of the magnetic moment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Specific absorption rate calculations of magnetite, using a modified linear response model for applications in magnetic hyperthermia

Currently the absorption of electromagnetic radiation by magnetic nanoparticles is studied for biomedical applications of cancer thermotherapy. Several experiments are conduced following the framework of the Rosensweig model, in order to estimate their specific absorption rate. Nevertheless, this linear approximation involves strong simplifications which constrain their accuracy and validity range. The main aim of this work is to incorporate the deviation of the sphericity assumption in particles shapes, to improve the determination of their specific absorption rate. The correction to the effective particles volume is computed as a measure of the apparent amount of magnetic material, interacting with the external AC magnetic field. Preliminary results using the physical properties of Fe3O4 nanoparticles, exhibit an important correction in their estimated specific absorption rate, as a function of the apparent mean particles radius. Indeed, we have observed using a small deviation (6% of the apparent radius), up to 40% of the predicted specific absorption rate by the Rosensweig linear approximation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗