Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Basaltic Shergottite NWA 856: Differentiation of a Martian Magma

NWA 856 or Djel Ibone, is a basaltic shergottite discovered as a single stone of 320 g in South Morocco in April, 2001. This meteorite is fresh, i.e. shows minimal terrestrial weathering for a desert find. No shergottite discovered in North Africa can be paired with NWA 856. The purpose of this study is to constrain its crystallization history using textural observations, crystallization sequence modeling and in-situ trace element analysis in order to understand differentiation in shergottite magmatic systems.

Ferdous, J.↗

Core Formation on Asteroid 4 Vesta: Iron Rain in a Silicate Magma Ocean

Geochemical observations of the eucrite and diogenite meteorites, together with observations made by NASA's Dawn spacecraft, suggest that Vesta resembles H chondrites in bulk chemical composition, possibly with about 25% of a CM-chondrite like composition added in. For this model, the core is 15% by mass (or 8 volume %) of the asteroid. The abundances of moderately siderophile elements (Ni, Co, Mo, W, and P) in eucrites require that essentially all of the metallic phase in Vesta segregated to form a core prior to eucrite solidification. Melting in the Fe-Ni-S system begins at a cotectic temperature of ~940 deg. C. Only about 40% of the total metal phase, or 3-4 volume % of Vesta, melts prior to the onset of silicate melting. Liquid iron in solid silicate initially forms isolated pockets of melt; connected melt channels, which are necessary if the metal is to segregate from the silicate, are only possible when the metal phase exceeds about 5 volume %. Thus, metal segregation to form a core does not occur prior to the onset of silicate melting.

Kiefer, Walter S.↗

Experimental Study into the Stability of Whitlockite and Hydroxylapatite in Basaltic Magmas

Apatite (Ca5(PO4)3(F,Cl,OH)), merrillite (Ca18Na2Mg2(PO4)14), and whitlockite (Ca9(Mg,Fe(2+))(PO4)6[PO3(OH)]) are the primary phosphate minerals found in most planetary materials including rocks from Earth, Moon, Mars, and asteroids. For many years, the terms merrillite and whitlockite have been used interchangeably in the meteorite literature. Much of the confusion regarding the relationship between terrestrial and extraterrestrial 'whitlockite' is based on the presence or absence of hydrogen in the mineral structure. Whitlockite has approximately 8500 ppm H2O, and the term 'merrillite' has been adopted to identify the hydrogen-free form of whitlockite. The atomic structures of merrillite and whitlockite were examined in detail by Hughes et al.. On Earth, whitlockite has been found in rocks from evolved pegmatitic systems and in some mantle rocks. Furthermore, terrestrial whitlockite has been shown to have some merrillite component. For the meteoritic and lunar materials that have been investigated, merrillite appears to be far more common than whitlockite, and it has been proposed that the whitlockite component is unique to terrestrial samples. There are some reports of 'whitlockite' in the meteorite literature; however, these may represent misidentifications of merrillite because there have been no reports of extraterrestrial whitlockite that have been verified through crystal structural studies or analyzed for their H contents. Hughes et al. reported the atomic arrangement of lunar merrillite and demonstrated that the phase is similar to meteoritic merrillite and, predictably, devoid of hydrogen. In a follow-up study, Hughes et al. reported the atomic arrangements of two natural samples of whitlockite, one synthetic whitlockite, and samples of synthetic whitlockite that were heated at 500 C or 1050 C for 24 h. The crystal chemistry and crystal structures of the phases were compared, and it was discovered that the latter treatment resulted in the dehydrogenation of whitlockite to form merrillite.

McCubbin, F. M.↗

Asymmetric Post-Magma Ocean Crust-Building on the Lunar Nearside

Mg-suite is a series of ancient plutonic rocks from the lunar crust with ages and com-positions indicating that they represent the first post-differentiation crust-building magmatism [1, 2]. Sam-ples of Mg-suite materials were found at every Apollo landing site except 11 and all exhibit geochemical characteristics indicating the involvement of KREEP in their petrogenesis [3-5]. This has led to the sugges-tion that the KREEP reservoir under the nearside was responsible for Mg-suite magmatism [e.g., 5, 6]. The lack of readily identifiable Mg-suite rocks in meteoritic regolith breccias sourced from outside the Procellarum KREEP Terrane (PKT) seemingly supports this interpretation.

Elardo, S. M.↗

Evidence for Early Extension and Pressure Drop Related to Magma Plumbing in Noctis Labyrinthus (Mars)

Noctis Labyrinthus is a complex district located between the western side of Valles Marineris’ large outflow channel and the Tharsis volcanic plateau. This region is characterized by a system of steep-walled canyons and an inter-connected network of scalloped pits that manifest in various orientations and size. The formation history of this area has been a topic of substantial discussion in the past. Previous studies have proposed a karst landscape with associated caves and water-related processes [1,2,3] a network of lava tubes [4,5], or a volcano-tectonic activity as a driving process for the formation of Noctis Labyrinthus [6,7,8,9]. However, none of these models have been confirmed or entirely accepted; although, the erosional nature of Noctis Labyrinthus is supported by the presence of channelized lava flows still visible on its floor [5]. In this work, we use MOLA and HRSC data to produce a new structural map of the region, we analyse fault systems (chronology and orientation), the relationships between faults and pit chains, and we finally propose a deformational model that can explain the sequences of events responsible about the formation of Noctis Labyrinthus.

M. El Yazidi↗

Exploration of A Magma-Sediment Hydrothermal System on Earth: Constraints on the Habitability Potential of Martian Noachian Hydrothermal Systems

The martian crust is predominantly composed of basalt [1] and hosts a large variety of alteration materials caused by wide-ranging processes from volcanic hydrothermal processes to sedimentary and post-magmatic (e.g., see [2] and reference within). Specifically, there is an abundance of evidence that water previously flowed on Mars, ranging from ancient stream beds [3], lake basins [4], sedimentary fans in Jezero crater [5, 6], and clay minerals [7]. These secondary minerals have been observed by landers and rovers [2], from orbit [8], and in martian meteorites [9-11]. Along with low temperature alteration, high temperature hydrothermal systems from volcanic processes, as well as meteorite impacts, should have been present [12,13]. However, finding evidence of high-temperature hydrothermal activity has been challenging. To better understand these processes on Mars, Earth analogs can be used and then compared to potential scenarios and locations on Mars. Therefore, here we investigate a mafic dike and the surrounding metamorphic contact zone that has been hydrothermally altered from contact with ground water as it was emplaced. We will also compare our results to previous work on Robbers Roost Dike, an older mafic dike near our field location that intruded a similar protolith causing a potentially habitable hydrothermal system [14. 15].

R A Slank↗

Measurement of Surface Deformation Related to the December 2018 Mt. Etna Eruption Using Time-Series Interferometry and Magma Modeling for Hazard Zone Mapping

Mount Etna has erupted several times since it was first formed. Recently, Mount Etna began erupting again over 24–27 December 2018. Because it erupts frequently, Mount Etna should be observed on a frequent basis. From June 2018 to October 2019, 34 and 56 interferometric synthetic aperture radar (InSAR) images were acquired from the ascending and descending tracks of the Sentinel-1 satellite, respectively. We employed the Stanford Method for Persistent Scatterers (StaMPS) and a refined small baseline subset (SBAS) InSAR method to produce a surface deformation time-series map. In the time-series analysis, the phase signal remained unaltered with time. The Okada model was then applied to the result to generate a modeled interferogram, and the Q-LavHA program was run to generate a lava flow prediction model. A direct comparison of the results showed that Persistent Scatterers Interferometry (PSI)-StaMPS and the refined SBAS technique were comparable in terms of the displacement pattern, with slightly different velocity values obtained for individual points. In particular, a velocity range of −25 to 21 cm/yr was obtained from PSI-StaMPS, whereas a range of −30 to 25 cm/yr was obtained from the refined SBAS method. Upon computation of the vertical and east-west displacement components based on ascending and descending track data using both methods, deformation velocities of 51.5 and 52.5 cm/yr in the westerly direction on the western flank of Mount Etna were obtained from PSI-StaMPS and the refined SBAS method, respectively, whereas on the eastern flank, deformation toward the east was estimated to occur at a velocity of 50.1 or 54.2 cm/yr, respectively. PSIStaMPS estimated a vertical deformation velocity of −5.3 to 18.3 cm/yr, whereas the refined SBAS method produced a velocity range of approximately −7 to 19 cm/yr. The interferogram obtained via Okada modeling showed two fault sources in the 2018 Mount Etna eruption and a total volume change of approximately 12.39 × 10 6 m 3 . From the modeling results, a lava flow prediction model was generated using the Q-LavHA program. The approaches described in this study can be used by government officials, authorities, and other decision-makers to monitor and assess the risk of volcanic activity in the region.

Suci Ramayanti↗

Habitability Potential of Martian Hydrothermal Systems Constrained from Exploration of a Magma-Sediment Hydrothermal System in the Colorado Plateau

Mars has a crust predominately composed of basalt, which displays wide-spread processes including volcanic hydrothermal systems and reference within. There is an abundance of evidence of previous low temperature hydrous alteration; however, finding evidence of high-temperature hydrothermal activity has been challenging. Therefore, we are investigating a mafic dike and the surrounding metamorphic contact zone to constrain how to find such systems on Mars and their habitability potential on Earth and by extension Mars. DC Dike (DCD) is in the Colorado Plateau, in south-central Utah, and intruded the Entrada formation Sandstone between 3.8 and 4.6 Ma. We chose Mars analog instrumentation to make our results directly applicable to those on Mars: Visible-Near Infrared reflectance spectroscopy (VNIR), X-Ray Diffraction (XRD), and Scanning Electron Microscope (SEM). 21 samples were analyzed with an Ore Express VNIR with wavelengths from 350-2500 nm. Bulk mineralogy is determined by using a Panalytical XRD including for clay fraction and soil separation analysis. Finally, samples are prepped as thin sections and will be analyzed using a SEM. All these techniques will be used to constrain: the mineralogy of the system, how the hydrothermal system cooled, the habitability of the cooling system, and how DCD relates to similar dikes in the area and on Mars. All of these results will then be compared to similar systems Mars, and if they too could have been habitable environments.

R. A. Slank↗

Investigation of a Magma-Sediment Hydrothermal Dike System in Utah: Constraints on the Habitability Potential of Martian Noachian Hydrothermal Systems

The Martian crust is predominantly composed of basalt and hosts a large variety of alteration materials produced by wide-ranging processes from volcanic hydrothermal processes to sedimentary and post-magmatic (e.g., see [2] and reference within). High temperature hydrothermal systems from volcanic processes, as well as meteorite impacts, should have occurred through time. However, finding evidence of high-temperature hydrothermal activity has been challenging. To better understand how to detect such a system on Mars, Earth analogs can be used to constrain mineral changes in such a system, then applied to locations on Mars. Here we investigate a mafic dike and the surrounding metamorphic contact zone that has been hydrothermally altered from contact with ground water as it was emplaced.

R A Slank↗

Detectability of Magma-Sediment Alteration Mineralogy Via Multi-Instrument Analysis: Implications for Terrestrial Analogs and the Search for Potentially Habitable Environments on Mars

The detection of magmatically driven hydrothermal systems on Mars has met with limited success. Remote sensing efforts have detected limited exposures, though they are usually isolated occurrences, and do not necessarily represent an in-situ alteration sequence. Some of the best evidence for such a system comes from Mars Exploration Rover Spirit’s investigations of Gusev Crater. Diverse alteration minerals were investigated, including possible detections of amorphous silica and montmorillonite. The question remains whether remote sensing/spectroscopy alone is capable of detecting such an alteration front, or if more detailed in-situ analyses are required. In order to constrain this, we have used Mars relevant instrumentation to investigate a terrestrial analog on the Colorado Plateau where a mafic dike intrudes the Jurassic Curtis Sandstone.

J R Crandall↗

4.46 Ga Zircons Anchor Chronology of Lunar Magma Ocean

The crystallisation ages of lunar samples provide critical constraints on the minimum formation age of the Moon and its early evolution. Zircon crystals from Apollo 17 lunar impact melt breccia 72255 preserve ancient domains with a concordant average uranium-lead radiometric date of 4460 ± 31 Ma (Zhang et al., 2021), the oldest lunar zircon yet reported. To assess the possible mobility of radiogenic lead in zircon, which may lead to redistribution and clustering of Pb atoms that may cause a U-Pb age bias (Valley et al., 2014), we investigated a zircon grain from Zhang et al. (2021) by atom probe tomography (APT). The atomic spatial resolution analysis of individual mineral grains demonstrates the absence of nanoscale clustering of lead, which supports a 4.46 Ga ancient formation age for lunar zircon in sample 72255. This age pushes back the age of the first preserved lunar crust by ∼40 Myr and provides a minimum formation age for the Moon within 110 Myr after the formation of the solar system.

atom probe tomography↗