Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Linearization error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Plasma gradient effets on doubel-probe measurements in the magnetosphere

The effects on double-probe electric field measurements induced by electron density and temperature gradients are investigated. We show that on some occasions such gradients may lead to marked spurious electric fields if the probes are assumed to lie at the same probe potential with repect to the plasma. The use of a proper bias current will decrease the magnitude of such an error. When the probes are near the plasma potential, the magnitude of these error signals, delta Epsilon, can vary as delta Epsilon approx. T(sub e)(Delta n(sub e)/n(sub e)) + 0.5 Delta T(sub e), where T(sub e) is the electron temperature, Delta n(sub e)/ n(sub e) the relative electron density variation between the two sensors, and Delta T(sub e) the electron temperature difference between the two sensors. This not only implies that the error signals will increase linearly with the density variations but also that such signatures grow with Delta T(sub e) i.e., such effects are 10 times larger in a 10-eV plasma than in a 1-eV plasma. This type of error is independent of the probe separation distance provided the gradient scale length is much larger than the distance. The largest errors occur when the probes are near to the plasma potential. During the crossing of a small structure (e.g, a double layer) the error signal appears as a bipolar signature. Our analysis shows that errors in double-probe measurements caused by plasma gradients are not significant at large scale (much greater than 1 km) plasma boundaries, and may only be important in cases where small-scale (less than 1 km), internal gradient structures exist. Bias currents tailored for each plasma parameter regime (i.e., variable bias current) would improve the double-probe response to gradient effects considerably.

Laakso, Harri↗

Solar and Wind Forecast Error Reserve Sharing in a Multi-Utility Region

As electricity systems transition to higher levels of solar and wind generation, electric system operators will likely need to hold additional reserves to manage the forecast error associated with these resources. Because wind and solar forecast errors tend to be poorly correlated across space, system operators can reduce their reserve requirements by sharing reserves. This paper examines the value of forecast error reserve sharing among balancing areas in the Southeast United States. It finds that forecast error reserve requirements increase linearly with growth in solar and wind generation capacity but that reserve sharing can significantly reduce physical (MW) reserve requirements (from 25%-26% to 18%-19% of average load in high solar scenarios). It finds that the value of forecast error reserve sharing declines with higher levels of solar and wind generation, due to lower wholesale energy and reserve prices. Even with declines in wholesale prices, forecast error reserve sharing can still provide substantial value (as much as $\$$400 million per year in a high solar scenario), though with higher levels of solar, wind, and electricity storage, this value is increasingly tied to avoiding scarcity prices. The results suggest the importance of coordinated capacity expansion planning for forecast error reserve sharing.

14 SOLAR ENERGY↗

Effects of Target Fragmentation on Evaluation of LET Spectra From Space Radiation in Low-Earth Orbit (LEO) Environment: Impact on SEU Predictions

Recent improvements in the radiation transport code HZETRN/BRYNTRN and galactic cosmic ray environmental model have provided an opportunity to investigate the effects of target fragmentation on estimates of single event upset (SEU) rates for spacecraft memory devices. Since target fragments are mostly of very low energy, an SEU prediction model has been derived in terms of particle energy rather than linear energy transfer (LET) to account for nonlinear relationship between range and energy. Predictions are made for SEU rates observed on two Shuttle flights, each at low and high inclination orbit. Corrections due to track structure effects are made for both high energy ions with track structure larger than device sensitive volume and for low energy ions with dense track where charge recombination is important. Results indicate contributions from target fragments are relatively important at large shield depths (or any thick structure material) and at low inclination orbit. Consequently, a more consistent set of predictions for upset rates observed in these two flights is reached when compared to an earlier analysis with CREME model. It is also observed that the errors produced by assuming linear relationship in range and energy in the earlier analysis have fortuitously canceled out the errors for not considering target fragmentation and track structure effects.

Shinn, J. L.↗

Propagation of statistical uncertainties in covariant density functional theory: Ground state observables and single-particle properties

Statistical errors in ground state observables and single-particle properties of spherical even-even nuclei and their propagation to the limits of nuclear landscape have been investigated in covariant density functional theory (CDFT) for the first time. Here, we consider only covariant energy density functionals with non-linear density dependency. Statistical errors for binding energies and neutron skins significantly increase on approaching two-neutron drip line. On the contrary, such a trend does not exist for statistical errors in charge radii and two-neutron separation energies. The absolute and relative energies of the single-particle states in the vicinity of the Fermi level are characterized by low statistical errors ($\sigma(e_i)\sim 0.1$ MeV). Statistical errors in the predictions of spin-orbit splittings are rather small. Statistical errors in physical observables are substantially smaller than related systematic uncertainties. As a result, at the present level of the development of theory, theoretical uncertainties at nuclear limits are dominated by systematic ones. Statistical errors in the description of physical observables related to the ground state and single-particle degrees of freedom are typically substantially lower in CDFT as compared with Skyrme density functional theory. The correlations between the model parameters are studied in detail. The parametric correlations are especially pronounced for the $g_2$ and $g_3$ parameters which are responsible for the density dependence of the model. The accounting of this fact potentially allows to reduce the number of free parameters of non-linear meson coupling model from six to five.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurements of the electron density and degree of plasma ionization in a plasma target based on a linear electric discharge in hydrogen

Laser interferometry methods were used to measure the density of free electrons and degree of plasma ionization in a hydrogen target intended for experiments on determining energy losses of heavy ion beams in an ionized matter. It is shown that the linear electron density can be varied in the range from 3.3 Multiplication-Sign 10{sup 17} to 1.3 Multiplication-Sign 10{sup 18} cm{sup -2} by varying the initial plasma parameters (the hydrogen pressure in the target and the discharge current). The error in measuring the linear electron density in the entire range of the varied plasma parameters was less than 1%. The maximum degree of plasma ionization achieved at the initial gas pressure of 1 mbar was 0.62 {+-} 0.05.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

How Well do Multisatellite Products Capture the Space-Time Dynamics of Precipitation? Part II: Building an Error Model Through Spectral System Identification

Satellite precipitation products, as all quantitative estimates, come with some inherent degree of uncertainty. To associate a quantitative value of the uncertainty to each individual estimate, error modeling is necessary. Most of the error models proposed so far compute the uncertainty as a function of precipitation intensity only, and only at one specific spatio-temporal scale. We propose a spectral error model which accounts for the neighboring space-time dynamics of precipitation into the uncertainty quantification. Systematic distortions of the precipitation signal and random errors are characterized distinctively in every frequency-wavenumber band in the Fourier domain, to accurately characterize error across scales. The systematic distortions are represented as a deterministic space-time linear filtering term. The random errors are represented as a non-stationary additive noise. The spectral error model is applied to the IMERG multi satellite precipitation product and its parameters are estimated empirically through a system identification approach using the GV-MRMS gauge-radar measurements as reference (“truth”) over the eastern United States. The filtering term is found to be essentially low-pass. While traditional error models attribute most of the error variance to random errors, it is found here that the systematic filtering term explains 48% of the error variance at the native resolution of IMERG. This fact confirms that, at high resolution, filtering effects in satellite precipitation products cannot be ignored, and that the error cannot be represented as a purely random additive or multiplicative term. An important consequence is that precipitation estimates derived from totally different sources shall not be expected to automatically have statistically independent errors.

Precipitation↗

Faster Randomized Dynamical Decoupling

We present a randomized dynamical decoupling (DD) protocol that can substantially improve the performance of any given deterministic DD scheme for suppressing coherent noise by using no more than two additional pulses. Our construction is implemented by probabilistically applying sequences of pulses, which, when combined, effectively eliminate the error terms that scale linearly with the system-environment coupling strength. As a result, we show that a randomized protocol using a few pulses can outperform deterministic DD protocols that require considerably more pulses. Furthermore, we prove that the randomized protocol provides an improvement compared to deterministic DD sequences that aim to reduce the error in the system’s Hilbert space, such as Uhrig DD, which had been previously regarded to be optimal. To rigorously evaluate the performance, we introduce new analytical methods suitable for analyzing higher-order DD protocols that might be of independent interest. Here, we also present numerical simulations confirming the significant advantage of using randomized protocols compared to widely used deterministic protocols.

Quantum algorithms & computation↗

Optimal function estimation with photonic quantum sensor networks

The problem of optimally measuring an analytic function of unknown local parameters each linearly coupled to a qubit sensor is well understood, with applications ranging from field interpolation to noise characterization. Here we resolve a number of open questions that arise when extending this framework to Mach-Zehnder interferometers and quadrature displacement sensing. In particular, we derive lower bounds on the achievable mean square error in estimating a linear function of either local phase shifts or quadrature displacements. In the case of local phase shifts, these results prove, and somewhat generalize, a conjecture by Proctor []. For quadrature displacements, we extend proofs of lower bounds to the case of arbitrary linear functions. We provide optimal protocols achieving these bounds up to small (multiplicative) constants and describe an algebraic approach to deriving new optimal protocols, possibly subject to additional constraints. Using this approach, we prove necessary conditions for the amount of entanglement needed for any optimal protocol for both local phase and displacement sensing. Published by the American Physical Society 2024

Bringewatt, Jacob↗

An experiment in software reliability: Additional analyses using data from automated replications

A study undertaken to collect software error data of laboratory quality for use in the development of credible methods for predicting the reliability of software used in life-critical applications is summarized. The software error data reported were acquired through automated repetitive run testing of three independent implementations of a launch interceptor condition module of a radar tracking problem. The results are based on 100 test applications to accumulate a sufficient sample size for error rate estimation. The data collected is used to confirm the results of two Boeing studies reported in NASA-CR-165836 Software Reliability: Repetitive Run Experimentation and Modeling, and NASA-CR-172378 Software Reliability: Additional Investigations into Modeling With Replicated Experiments, respectively. That is, the results confirm the log-linear pattern of software error rates and reject the hypothesis of equal error rates per individual fault. This rejection casts doubt on the assumption that the program's failure rate is a constant multiple of the number of residual bugs; an assumption which underlies some of the current models of software reliability. data raises new questions concerning the phenomenon of interacting faults.

Dunham, Janet R.↗

Ephemeris errors of GPS satellites

Numerical models are developed to examine the potential effects of solar radiation, the terrestrial gravitational field, and the estimated initial state of the Global Positioning System (GPS) satellites, along with the capability of current models to account for the effects on the ephemeris of the GPS constellation. Of particular interest is the accuracy of the satellite position predictions for applications in geodesy. The main characteristics of the GPS orbits are reviewed and linear combinations of possible errors for 3 day ephemerides are examined. It is shown that the effects of the forces on the GPS orbits will be dynamic, yet can be expressed simply enough to maintain positioning accuracy to 1 percent. The calculations can also take into consideration solar wind pressure on the solar panels.

Colombo, O. L.↗

Successful combination of the stochastic linearization and Monte Carlo methods

A combination of a stochastic linearization and Monte Carlo techniques is presented for the first time in literature. A system with separable nonlinear damping and nonlinear restoring force is considered. The proposed combination of the energy-wise linearization with the Monte Carlo method yields an error under 5 percent, which corresponds to the error reduction associated with the conventional stochastic linearization by a factor of 4.6.

Elishakoff, I.↗

Statistical retrieval of precipitation cell-top altitude using passive 118-GHz observations

A nonlinear statistical-retrieval operator for precipitation cell-top altitude using high-spatial-resolution passive 118-GHz O2 brightness spectra is demonstrated. The retrieval operator consists of a Karhunen-Loeve transformation followed by a rank reduction, a linearization, and a linear minimum mean-square-error estimator. Information from the 118-GHz data on the ambient atmospheric-temperature profile and the precipitation cell size is also incorporated into the linear stage of the retrieval operator. The rms retrieval error is 1.5 km for cumulus-stage cells with tops ranging from 1.5 to 16 km. The sensitivity of nadiral 118-GHz spectra to the cell-top altitude is predominantly due to the scattering and absorption of radiation originating from low, warm atmospheric levels by colder liquid and frozen precipitation This effect causes cold perturbations in the brightness spectrum, which typically become stronger with increasing cell-top altitude.

Gasiewski, A. J.↗

Overcoming element quality dependence of finite elements with adaptive extended stencil FEM (AES‐FEM)

Summary The finite element methods (FEMs) are important techniques in engineering for solving partial differential equations, but they depend heavily on element shape quality for stability and good performance. In this paper, we introduce the Adaptive Extended Stencil Finite Element Method (AES‐FEM) as a means for overcoming this dependence on element shape quality. Our method replaces the traditional basis functions with a set of generalized Lagrange polynomial basis functions , which we construct using local weighted least‐squares approximations. The method preserves the theoretical framework of FEM and allows imposing essential boundary conditions and integrating the stiffness matrix in the same way as the classical FEM. In addition, AES‐FEM can use higher‐degree polynomial basis functions than the classical FEM, while virtually preserving the sparsity pattern of the stiffness matrix. We describe the formulation and implementation of AES‐FEM and analyze its consistency and stability. We present numerical experiments in both 2D and 3D for the Poisson equation and a time‐independent convection–diffusion equation. The numerical results demonstrate that AES‐FEM is more accurate than linear FEM, is also more efficient than linear FEM in terms of error versus runtime, and enables much better stability and faster convergence of iterative solvers than linear FEM over poor‐quality meshes. Copyright © 2016 John Wiley & Sons, Ltd.

Conley, Rebecca↗

Onboard Navigation Error Analysis for Aerocapture at Uranus

Capturing into an orbit around Uranus using aerocapture allows one to design a mission with faster interplanetary trajectories and less propellant requirements. Such an aerocapture mission would rely on the onboard Guidance, Navigation, and Control (GNC) subsystems to successfully capture into an orbit around Uranus. Uncertainty in the state information and the noise in the sensor measurements induce navigation errors in the guidance and control subsystems, which can affect the overall performance of the aerocapture mission at Uranus. Understanding the effect of these navigation errors on mission performance is essential. To this end, this work considers different sensors with varying quality to understand their impact on the overall mission performance. In addition, this paper studies the impact of the uncertainty in the initial states used to initialize the onboard navigation filter and understands their effect on mission performance. This paper also shows the onboard navigation errors obtained from the Linear Covariance (LinCov) analysis and uses them for verification and validation (V\&V) of the results from Program to Optimize and Simulate Trajectories-II (POST2).

Aerocapture↗

A Mixed Discontinuous Galerkin Method for Linear Elasticity with Strongly Imposed Symmetry

In this paper, we study a mixed discontinuous Galerkin (MDG) method to solve linear elasticity problem with arbitrary order discontinuous finite element spaces in d -dimension ( \(d=2,3\) ). This method uses polynomials of degree \(k+1\) for the stress and of degree k for the displacement ( \(k\ge 0\) ). The mixed DG scheme is proved to be well-posed under proper norms. Specifically, we prove that, for any \(k \ge 0\) , the \(H(\mathrm{div})\) -like error estimate for the stress and \(L^2\) error estimate for the displacement are optimal. We further establish the optimal \(L^2\) error estimate for the stress provided that the \({\mathcal {P}}_{k+2}-{\mathcal {P}}_{k+1}^{-1}\) Stokes pair is stable and \(k \ge d\) . Finally, we also provide numerical results of MDG showing that the orders of convergence are actually sharp.

97 MATHEMATICS AND COMPUTING↗

The Backup-Gilbert method and its application to the electrical conductivity problem

The theory of Backus and Gilbert gives a technique for solving the general linear inverse problem. Observational error and lack of data are shown to reduce the reliability of the solution in different ways: the former introduces statistical uncertainties in the model, while the latter smooths out the detail. Precision can be improved by sacrificing resolving power, and vice versa, so that some compromise may be made between the two in choosing the best model. Nonlinear inverse problems can be brought into the domain of the theory by linearizing about a typical solution. The inverse problem of electrical conductivity in the mantle is used to illustrate the Backus-Gilbert technique; an example of the tradeoff diagram is given.

Parker, R. L.↗

A Reduced Dimension Static, Linearized Kalman Filter and Smoother

An approximate Kalman filter and smoother, based on approximations of the state estimation error covariance matrix, is described. Approximations include a reduction of the effective state dimension, use of a static asymptotic error limit, and a time-invariant linearization of the dynamic model for error integration. The approximations lead to dramatic computational savings in applying estimation theory to large complex systems. Examples of use come from TOPEX/POSEIDON.

Kalman filter smoother modeling ocean simulation↗

Error quantification of the Arrhenius blending rule for viscosity of hydrocarbon mixtures

Six hundred and seventy-five measurements of dynamic viscosity and density have been used to assess the prediction error of the Arrhenius blending rule for kinematic viscosity of hydrocarbon mixtures. Major trends within the data show that mixture complexity–binary to hundreds of components—and temperature are more important determinants of prediction error than differences in molecular size or hydrogen saturation between the components of the mixtures. Over the range evaluated, no correlation between prediction error and mole fractions was observed, suggesting the log of viscosity truly is linear in mole fraction, as indicated by the Arrhenius blending rule. Mixture complexity and temperature also impact molar volume and its prediction. However, a linear regression between the two model errors explains less than 20% of the observed variation, indicating that mixture viscosity and/or molar volume are not linear with respect to temperature and/or mixture complexity. Extensive discussion of the intermolecular forces and the geometric arrangement of molecules and vacancies in liquids, which ultimately determines its viscosity, is brought into context with the implicit approximations behind the Arrhenius blending rule. The complexity of this physics is not compatible with a simple algebraic correction to the model. However, sufficient data is now available to determine confidence intervals around the prediction of fuel viscosity based on its component mole fractions and viscosities. At -40°C, when all identified components are pure molecules the modeling error is 13.2% of the predicted (nominal) viscosity times the root mean square of the component mole fractions.

10 SYNTHETIC FUELS↗