Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Limit Branch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Deep Etching Process Developed for the Fabrication of Silicon Carbide Microsystems

Silicon carbide (SiC), because of its superior electrical and mechanical properties at elevated temperatures, is a nearly ideal material for the microminiature sensors and actuators that are used in harsh environments where temperatures may reach 600 C or greater. Deep etching using plasma methods is one of the key processes used to fabricate silicon microsystems for more benign environments, but SiC has proven to be a more difficult material to etch, and etch depths in SiC have been limited to several micrometers. Recently, the Sensors and Electronics Technology Branch at the NASA Glenn Research Center at Lewis Field developed a plasma etching process that was shown to be capable of etching SiC to a depth of 60 mm. Deep etching of SiC is achieved by inductive coupling of radiofrequency electrical energy to a sulfur hexafluoride (SF6) plasma to direct a high flux of energetic ions and reactive fluorine atoms to the SiC surface. The plasma etch is performed at a low pressure, 5 mtorr, which together with a high gas throughput, provides for rapid removal of the gaseous etch products. The lateral topology of the SiC microstructure is defined by a thin film of etch-resistant material, such as indium-tin-oxide, which is patterned using conventional photolithographic processes. Ions from the plasma bombard the exposed SiC surfaces and supply the energy needed to initiate a reaction between SiC and atomic fluorine. In the absence of ion bombardment, no reaction occurs, so surfaces perpendicular to the wafer surface (the etch sidewalls) are etched slowly, yielding the desired vertical sidewalls.

Beheim, Glenn M.↗
NASA NTRS2009

The Dispersion Relation for the 1/sinh(exp 2) Potential in the Classical Limit

The dispersion relation for the inverse hyperbolic potential is calculated in the classical limit. This is shown for both the low amplitude phonon branch and the high amplitude soliton branch. It is shown these results qualitatively follow that previously found for the inverse squared potential where explicit analytic solutions are known.

Campbell, Joel↗
DOE OSTI2020

An investigation of the very rare ${K}^{+}\to {\pi}^{+}\nu \overline{\nu}$ decay

The NA62 experiment reports an investigation of the ${K}^{+}\to {\pi}^{+}\nu \overline{\nu}$ mode from a sample of ${K}^{+}$ decays collected in 2017 at the CERN SPS. The experiment has achieved a single event sensitivity of (0.389 ± 0.024) × 10 -10 , corresponding to 2.2 events assuming the Standard Model branching ratio of (8.4 ± 1.0) × 10 -11 . Two signal candidates are observed with an expected background of 1.5 events. Combined with the result of a similar analysis conducted by NA62 on a smaller data set recorded in 2016, the collaboration now reports an upper limit of 1.78 × 10 -10 for the ${K}^{+}\to {\pi}^{+}\nu \overline{\nu}$ branching ratio at 90% CL. This, together with the corresponding 68% CL measurement of (${0.48}_{-0.48}^{+0.72}$) × 10 -10 , are currently the most precise results worldwide, and are able to constrain some New Physics models that predict large enhancements still allowed by previous measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Search for exotic Higgs boson decays H → 𝒜𝒜 with 𝒜 → γγ in events with a semi-merged topology in proton-proton collisions at $\sqrt{s}=13$ TeV

A search for exotic Higgs boson decays H → 𝒜𝒜, with 𝒜 → γγ is presented, using events with a semi-merged topology. One of the hypothetical particles, 𝒜, is assumed to decay promptly into a semi-merged diphoton system reconstructed as a single photon-like object, while the other 𝒜 decays into two resolved photons. The search is performed using proton-proton collision data collected by the CMS experiment at $\sqrt{s}=13$ TeV, corresponding to an integrated luminosity of 138 fb −1 . The data agree with the standard model background expectation. Upper limits are set on the product of the Higgs boson production cross section and the branching fraction, σ(pp → H) ℬ(H → 𝒜𝒜 → 4γ), which range from 0.264 to 0.005 pb at 95% confidence level, for 𝒜 masses in the range 1 < m 𝒜 < 15 GeV. These limits are the most stringent to date in the 1–5 GeV m 𝒜 range.

Beyond Standard Model↗
DOE OSTI2020

Search for the doubly heavy $ {\Xi}_{bc}^0 $ baryon via decays to D0pK-

A search for the doubly heavy \( {\Xi}_{bc}^0 \) baryon using its decay to the D 0 pK – final state is performed using proton-proton collision data at a centre-of-mass energy of 13 TeV collected by the LHCb experiment between 2016 and 2018, corresponding to an integrated luminosity of 5.4 fb - 1 . No significant signal is found in the invariant mass range from 6.7 to 7.2 GeV/ c 2 . Upper limits are set at 95% credibility level on the ratio of the \( {\Xi}_{bc}^0 \) production cross-section times its branching fraction to D 0 pK - relative to that of the \( {\Lambda}_b^0\to {D}^0{pK}^{-} \) decay. The limits are set as a function of the \( {\Xi}_{bc}^0 \) mass and lifetime hypotheses, in the rapidity range from 2.0 to 4.5 and in the transverse momentum region from 5 to 25 GeV/ c . Upper limits range from 1 . 7 × 10 - 2 to 3 . 0 × 10 - 1 for the considered \( {\Xi}_{bc}^0 \) mass and lifetime hypotheses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Full 3D Kinetic Modeling and Quantification of Positive Streamer Evolution in an Azimuthally Swept Pin-to-Plane Wedge Geometry

Cathode-directed streamer evolution in near atmospheric air is modeled in 3D pin-to-plane geometries using a 3D kinetic Particle-In-Cell (PIC) code that simulates particle-particle collisions via the Direct Simulation Monte Carlo (DSMC) method. Due to the computational challenges associated with a complete 360° volumetric domain, a practical alternative was achieved using a wedge domain and a range of azimuthal angles was explored (5°, 15°, 30°, and 45°) to study possible effects on the streamer growth and propagation due to the finite wedge angle. A DC voltage of 6 kV is administered to a hemispherical anode of radius 100 μm, with a planar cathode held at ground potential, generating an over-volted state with an electric field of 4 MV/m across a 1500 μm gap. The domain is seeded with an initial ion and electron density of 10 18 m -3 at 1 eV temperature confined to a spherical region of radius 100 μm centered at the tip of the anode. The air chemistry model [1] includes standard Townsend breakdown mechanisms (electron-neutral elastic, excitation, ionization, attachment, and detachment collision chemistry and secondary electron emission) as well as streamer mechanisms (photoionization and ion-neutral collisions) via tracking excited state neutrals which can then either quench via collisions or spontaneously emit a photon based on specific Einstein-A coefficients [2, 3]. In this work, positive streamer dynamics are formally quantified for each wedge angle in terms of electron velocity and density as temporal functions of coordinates r, Φ, and z. Applying a random plasma seed for each simulation, particles of interest are tracked with near femtosecond temporal resolution out to 1.4 ns and spatially binned. This process is repeated six times and results are averaged. Prior 2D studies have shown that the reduced electric field, E/n, can significantly impact streamer evolution [4]. We extend the analysis to 3D wedge geometries, to limit computational costs, and examine the wedge angle’s effect on streamer branching, propagation, and velocity. Results indicate that the smallest wedge angle that produced an acceptably converged solution is 30°. The potential effects that a mesh, when under-resolved with respect to the Debye length, can impart on streamer dynamics and numerical heating were not investigated, and we explicitly state here that the smallest cell size was approximately 10 times the minimum λ D in the streamer channel at late times. This constraint on cell size was the result of computational limitations on total mesh count.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Search for bottom-type vectorlike quark pair production in dileptonic and fully hadronic final states in proton-proton collisions at s = 13 TeV

A search is described for the production of a pair of bottom-type vectorlike quarks ( B VLQs) with mass greater than 1000 GeV. Each B VLQ decays into a b quark and a Higgs boson, a b quark and a Z boson, or a t quark and a W boson. This analysis considers both fully hadronic final states and those containing a charged lepton pair from a Z boson decay. The products of the H → b b boson decay and of the hadronic Z or W boson decays can be resolved as two distinct jets or merged into a single jet, so the final states are classified by the number of reconstructed jets. The analysis uses data corresponding to an integrated luminosity of 138 fb - 1 collected in proton-proton collisions at s = 13 TeV with the CMS detector at the LHC from 2016 to 2018. No excess over the expected background is observed. Lower limits are set on the B VLQ mass at the 95% confidence level. These depend on the B VLQ branching fractions and are 1570 and 1540 GeV for 100% B → b H and 100% B → b Z , respectively. In most cases, the mass limits obtained exceed previous limits by at least 100 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2004

Fabrication of a novel gigabit/second free-space optical interconnect - photodetector characterization and testing and system development

The time when computing power is limited by the copper wire inherent in the computer system and not the speed of the microprocessor is rapidly approaching. With constant advances in computer technology, many researchers believe that in only a few years, optical interconnects will begin to replace copper wires in your Central Processing Unit (CPU). On a more macroscopic scale, the telecommunications industry has already made the switch to optical data transmission as, to date, fiber optic technology is the only reasonable method of reliable, long range data transmission. Within the span of a decade, we will see optical technologies move from the macroscopic world of the telecommunications industry to the microscopic world of the computer chip. Already, the communications industry is marketing commercially available optical links to connect two personal computers, thereby eliminating the need for standard and comparatively slow wired and wireless Ethernet transfers and greatly increasing the distance the computers can be separated. As processing demands continue to increase, the realm of optical communications will continue to move closer to the microprocessor and quite possibly onto the microprocessor itself. A day may come when copper connections are used only to supply power, not transfer data. This summer s work marks some of the beginning stages of a 5 to 10 year, long-term research project to create and study a free-space, 1 Gigabit/sec optical interconnect. The research will result in a novel fabricated, chip-to-chip interconnect consisting of a Vertical Cavity Surface Emitting Laser (VCSEL) Diode linked through free space to a Metal- Semiconductor-Metal (MSM) Photodetector with the possible integration of microlenses for signal focusing and Micro-Electromechanical Systems (MEMS) devices for optical signal steering. The advantages, disadvantages, and practicality of incorporating flip-chip mounting technologies will also be addressed. My work began with the design and construction of a test setup for the experiment and then appropriate characterization of the test system. Specifically, I am involved in the characterization of a commercially available 1550nm wavelength, 5mW diode laser and a study of its modulation bandwidth. Commercially produced photodetectors as well as the incorporation of microwave technology, in the form of RF input and output, are used in the characterization procedure. The next stage involves the use of a probe station and network analyzer to characterize and test a series of photodetectors fabricated on a 2 inch, Indium Gallium Arsenide (InGaAs) wafer in the Branch s microlithography lab. Other project responsibilities include, but are not limited to the incorporation of a transimpedance amplifier to the photodetector circuit; a study of VCSEL technology; bit error rate analysis of an optical interconnect system; and analysis of free space divergence of the VCSEL, optical path length of the interconnect; and any other pertinent optical properties of the one gigabit per second interconnect for fabrication and testing.

Savich, Gregory R.↗
DOE OSTI2023

Search for Higgs boson decays to a Z boson and a photon in proton-proton collisions at $ \sqrt{s} $ = 13 TeV

Results are presented from a search for the Higgs boson decay H → Zγ, where Z → ℓ$^{+}$ℓ$^{−}$ with ℓ = e or μ. The search is performed using a sample of proton-proton (pp) collision data at a center-of-mass energy of 13 TeV, recorded by the CMS experiment at the LHC, corresponding to an integrated luminosity of 138 fb$^{−1}$. Events are assigned to mutually exclusive categories, which exploit differences in both event topology and kinematics of distinct Higgs production mechanisms to enhance signal sensitivity. The signal strength μ, defined as the product of the cross section and the branching fraction $ \left[\sigma \left(\textrm{pp}\to \textrm{H}\right)\mathcal{B}\left(\textrm{H}\to \textrm{Z}\upgamma \right)\right] $ relative to the standard model prediction, is extracted from a simultaneous fit to the ℓ$^{+}$ℓ$^{−}$γ invariant mass distributions in all categories and is measured to be μ = 2.4 ± 0.9 for a Higgs boson mass of 125.38 GeV. The statistical significance of the observed excess of events is 2.7 standard deviations. This measurement corresponds to $ \left[\sigma \left(\textrm{pp}\to \textrm{H}\right)\mathcal{B}\left(\textrm{H}\to \textrm{Z}\upgamma \right)\right]=0.21\pm 0.08 $ pb. The observed (expected) upper limit at 95% confidence level on μ is 4.1 (1.8), where the expected limit is calculated under the background-only hypothesis. The ratio of branching fractions $ \mathcal{B}\left(\textrm{H}\to \textrm{Z}\upgamma \right)/\mathcal{B}\left(\textrm{H}\to \upgamma \upgamma \right) $ is measured to be $ {1.5}_{-0.6}^{+0.7} $, which agrees with the standard model prediction of 0.69 ± 0.04 at the 1.5 standard deviation level.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Search for pair production of third-generation leptoquarks decaying into a bottom quark and a $\tau $-lepton with the ATLAS detector

Abstract A search for pair-produced scalar or vector leptoquarks decaying into a b -quark and a $$\tau $$ τ -lepton is presented using the full LHC Run 2 (2015–2018) data sample of 139 fb $$^{-1}$$ - 1 collected with the ATLAS detector in proton–proton collisions at a centre-of-mass energy of $$\sqrt{s} =13$$ s = 13 TeV. Events in which at least one $$\tau $$ τ -lepton decays hadronically are considered, and multivariate discriminants are used to extract the signals. No significant deviations from the Standard Model expectation are observed and 95% confidence-level upper limits on the production cross-section are derived as a function of leptoquark mass and branching ratio $$\mathcal {B}$$ B into a $$\tau $$ τ -lepton and b -quark. For scalar leptoquarks, masses below 1460 GeV are excluded assuming $$\mathcal {B}=100$$ B = 100 %, while for vector leptoquarks the corresponding limit is 1650 GeV (1910 GeV) in the minimal-coupling (Yang–Mills) scenario.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Dynamic mode decomposition for gyrokinetic eigenmode analysis

Dynamic mode decomposition (DMD) is a post-processing approach to decompose a complex time series into a set of modes via spectral analysis. DMD provides a new and powerful method to recover gyrokinetic drift-wave eigenfrequencies and eigenfunctions based only on the solution of the gyrokinetic-Maxwell initial value problem with almost no added cost to the initial value solver. In the present paper, DMD is applied to the CGYRO gyrokinetic code using a newly-developed CGYRO-DMD post-processor. CGYRO-DMD is numerically efficient, even on a single CPU. It does not set any restrictions on the plasma shape, beta (ratio of the plasma pressure to the magnetic field pressure), collisionality or number of species, and allows one to resolve numerous eigenmodes, even of comparable growth rates. In addition, DMD is not limited to unstable modes, but rather can capture stable and unstable branches simultaneously. In this work, we illustrate the accuracy of DMD through gyrokinetic analysis of mode transition for electromagnetic drift wave instabilities.

drift-wave eigenmodes↗
DOE OSTI2025

Search for a massless dark photon in c → u γ ′ decays

Using 7.9 f b − 1 of e + e − collision data collected at s = 3.773 GeV with the BESIII detector at the BEPCII collider, we search for the massless dark photon with the flavor-changing neutral current processes D 0 → ω γ ′ and D 0 → γ γ ′ for the first time. No significant signals are observed, and the upper limits at the 90% confidence level on the massless dark photon branching fraction are set to be 1.1 × 10 − 5 and 2.0 × 10 − 6 for D 0 → ω γ ′ and D 0 → γ γ ′ , respectively. These results provide the most stringent constraint on the new physics energy scale associated with c u γ ′ coupling in the world, with the new physics energy scale related parameter | C | 2 + | C 5 | 2 < 8.2 × 10 − 17 GeV − 2 at the 90% confidence level. Published by the American Physical Society 2025

Ablikim, M.↗
DOE OSTI2020

Search for Higgs Boson Decays into a Z Boson and a Light Hadronically Decaying Resonance Using 13 TeV pp Collision Data from the ATLAS Detector

A search for Higgs boson decays into a Z boson and a light resonance in two-lepton plus jet events is performed, using a p p collision dataset with an integrated luminosity of 139 fb–1 collected at √ s = 13 TeV by the ATLAS experiment at the CERN LHC. The resonance considered is a light boson with a mass below 4 GeV from a possible extended scalar sector or a charmonium state. Multivariate discriminants are used for the event selection and for evaluating the mass of the light resonance. No excess of events above the expected background is found. Observed (expected) 95% confidence-level upper limits are set on the Higgs boson production cross section times branching fraction to a Z boson and the signal resonance, with values in the range 17–340 pb ($16^{+6}_{– 5}–320^{+130}_{–90}$ pb) for the different light spin-0 boson mass and branching fraction hypotheses, and with values of 110 and 100 pb ($100^{+40}_{–30}$ and $100^{+40}_{–30}$ pb ) for the $η_c$ and J/ψ hypotheses, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Systematic Bayesian evaluation of resonance parameters in 19 Ne for the 15 O ⁡(𝛼, 𝛾)⁢ 19 Ne and 18 F ⁡(𝑝, 𝛼)⁢ 15 O reactions

Here, we present a comprehensive evaluation of the nuclear structure properties of 19 Ne using a novel and rigorous Bayesian statistical framework. Precise characterization of 19 Ne resonance parameters is critical for accurately determining reaction rates of the astrophysically significant 15 O ⁡(𝛼, 𝛾)⁢ 19 Ne and 18 F ⁡(𝑝, 𝛼)⁢ 15 O reactions, which govern breakout from the hot CNO cycle in x-ray bursts and influence 𝛾-ray emission in novae, respectively. By reconstructing likelihood functions from published experimental data—including asymmetric uncertainties and upper or lower limits—we derive posterior distributions for resonance energies, decay widths, and branching ratios. Our Bayesian approach systematically incorporates previously reported discrepancies among measurements, providing a statistically robust and consistent treatment of these uncertainties. The evaluated resonance parameters and associated uncertainties provide crucial input for stellar nucleosynthesis modeling, contributing to a refined understanding of explosive astrophysical phenomena.

Kim, Sohyun H. [Sungkyunkwan Univ., Suwon (Republi↗
NASA NTRS1964

PTC thermistor protects multiloaded power supplies

A PTC /Positive-Temperature-Coefficient/ thermistor placed in series with each branch load of a multiload circuit prevents power loss in parallel branches. This thermistor may be used in any circuit requiring current limiting or intended overload resetting.

Leverone, H.↗
NASA NTRS1986

Satellite rainfall retrieval by logistic regression

The potential use of logistic regression in rainfall estimation from satellite measurements is investigated. Satellite measurements provide covariate information in terms of radiances from different remote sensors.The logistic regression technique can effectively accommodate many covariates and test their significance in the estimation. The outcome from the logistical model is the probability that the rainrate of a satellite pixel is above a certain threshold. By varying the thresholds, a rainrate histogram can be obtained, from which the mean and the variant can be estimated. A logistical model is developed and applied to rainfall data collected during GATE, using as covariates the fractional rain area and a radiance measurement which is deduced from a microwave temperature-rainrate relation. It is demonstrated that the fractional rain area is an important covariate in the model, consistent with the use of the so-called Area Time Integral in estimating total rain volume in other studies. To calibrate the logistical model, simulated rain fields generated by rainfield models with prescribed parameters are needed. A stringent test of the logistical model is its ability to recover the prescribed parameters of simulated rain fields. A rain field simulation model which preserves the fractional rain area and lognormality of rainrates as found in GATE is developed. A stochastic regression model of branching and immigration whose solutions are lognormally distributed in some asymptotic limits has also been developed.

Chiu, Long S.↗
NASA NTRS1994

Surface roughness measurements

The Optics Division is currently in the research phase of producing grazing-incidence mirrors to be used in x-ray detector applications. The traditional method of construction involves labor-intensive glass grinding. This also culminates in a relatively heavy mirror. For lower resolution applications, the mirrors may be of a replicated design which involves milling a mandrel as a negative of the final shape and electroplating the cylindrical mirror onto it. The mirror is then separated from the mandrel by cooling. The mandrel will shrink more than the 'shell' (mirror) allowing it to be pulled from the mandrel. Ulmer (2) describes this technique and its variations in more detail. To date, several mirrors have been tested at MSFC by the Optical Fabrication Branch by focusing x-ray energy onto a detector with limited success. Little is known about the surface roughness of the actual mirror. Hence, the attempt to gather data on these surfaces. The test involves profiling the surface of a sample, replicating the surface as described above, and then profiling the replicated surface.

Howard, Thomas G.↗
NASA NTRS2017

Work Term Assignment Spring 2017

My tour in the Engineering Robotics directorate exceeded my expectations. I learned lessons about Creo, manufacturing and assembly, collaboration, and troubleshooting. During my first tour, last spring, I used Creo on a smaller project, but had limited experience with it before starting in the Dynamic Systems Test branch this spring. I gained valuable experience learning assembly design, sheet metal design and designing with intent for manufacturing and assembly. These skills came from working both on the hatch and the floor. I also learned to understand the intent of other designers on models I worked with. While redesigning the floor, I was modifying an existing part and worked to understand what the previous designer had done to make it fit with the new model. Through working with the machine shop and in the mock-up, I learned much more about manufacturing and assembly. I used a Dremel, rivet gun, belt sander, and countersink for the first time. Through taking multiple safety training for different machine shops, I learned new machine shop safety skills specific to each one. This semester also gave me new collaborative opportunities. I collaborated with engineers within my branch as well as with Human Factors and the building 10 machine shop. This experience helped me learn how to design for functionality and assembly, not only for what would be easiest in my designs. In addition to these experiences, I learned many lessons in troubleshooting. I was the first person in my office to use a Windows 10 computer. This caused unexpected issues with NASA services and programs, such as the Digital Data Management Server (DDMS). Because of this, I gained experience finding solutions to lockout and freeze issues as well as Creo specific settings. These will be useful skills to have in the future and will be implemented in future rotations. This co-op tour has motivated me more to finish my degree and pursue my academic goals. I intend to take a machining Career Gateway Elective in the Fall to improve my skills in building as well as designing with manufacturing intent. I am also inspired to take more mechatronics CGE courses before I graduate to learn more about the crossover between mechanical and electrical engineering. This semester, I worked on multiple projects and had the opportunity to learn from engineers of different disciplines. I became proficient in Creo 2.0, a program I had not used significantly before. I finished modifying the hatch for 3D print and made sizeable modifications to the nose floor support design. I also gained hands-on experience that will be useful in my engineering career in the future. I would consider all of these major achievements from this spring semester. Lastly, I learned to ask more questions and to search for the right people to find answers which I know will be a valuable skill in the future. This summer, I will be completing my last rotation in the Flight Operations Directorate at Ellington Air Field. After this last tour, I will be returning to school for the Fall, Spring and Summer. I will graduate in August of 2018. I am looking forward to learning more about the different jobs available to engineers. This division works directly with many different types of aircrafts and I am excited to learn more about this focus of engineering. The Aircraft Operations Division values team work greatly and I intend to improve my interpersonal skills by working with them this summer.

Sico, Mallory↗