Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Analysis of Strategic Conflict Management Approaches as Applied to Simulated UAM Operations

This report presents the results of a comparison analysis of candidate Strategic Conflict Management (SCM) strategies as applied to Urban Air Mobility (UAM) operations. The SCM strategies investigated included: no SCM, resource scheduling (RS), resource flow rates (FR), area-based flow rates (AR), and conflict detection and resolution (CR). The study evaluated each strategy against the same 3 levels of flight demand in a representative airspace construct for the Dallas/Fort Worth region. The study also accounted for different levels of uncertainty in operational planning and equivalent levels of trajectory following error. In the analysis, we compared the SCM strategies’ effectiveness in reducing the need for the tactical conflict management layer to act and looked at the metrics of unmitigated losses-of-separation (LOS), flight delays imposed by strategic planning, and throughput of the overall airspace. The study results indicated that the CR strategy was the most effective at reducing LOS and percentage of flights with LOS, even in the presence of trajectory error when uncertainty is accounted for in planning. Thus, if the objective is to reduce the number of actions that the tactical conflict management layer will have to take, in terms of conflicts that may need to be resolved, CR is the strategy to use. The FR strategy was found to be the worst at reducing LOS and percentage of flights with LOS. Thus, it is not very effective at reducing the actions required by a tactical conflict management layer. In the airspace tested, the demand was high enough to produce unacceptable levels of flight delay and reductions of throughput when the SCM strategies were implemented. This was especially evident at the higher levels of trajectory uncertainty and error. The need to account for expected levels of uncertainty becomes more and more important as the demand level increases and as the level of trajectory error increases. This is because the likelihood of flights with LOS increases as the density of operations increases and as the level of trajectory error increases. Accounting for uncertainty in the SCM strategies improves the strategy effectiveness with respect to LOS but increases delays and reduces throughput. Thus, there is a tradeoff between scalability and allowable levels of uncertainty. That is, we can implement an air traffic management construct that allows high levels of uncertainty, but we can expect that same system to have limits on scalability that may be evident even at small demand levels, such as those used in this study. Therefore, the results in this study indicate that an air traffic system should attempt to implement mechanisms appropriate for reducing uncertainty where possible in order to increase the chances for scalability. And this increased level of predictability of operations needs to be balanced with mechanisms for ensuring flexibility when operational conditions and plans need to change, even though those types of changes should be the exception rather than the rule under normal conditions. The study also introduced a trade space that could serve as a mechanism for selecting the appropriate SCM strategy in a trade-off between uncertainty and error, mean flight delay, and the LOS metrics (which this study equates to the potential for tactical conflict management actions). The optimal solution for a given airspace, demand level, and other factors, could likely be a combination of SCM strategies, although this study only compared the use of a single SCM strategy at a time. The CR strategy appeared to have the best opportunity for scalability by limiting the number of potential tactical actions to nearly zero.

Strategic Conflict Management↗

Nonstationary envelope process and first excursion probability

A definition of the envelope of nonstationary random processes is proposed. The establishment of the envelope definition makes it possible to simulate the nonstationary random envelope directly. Envelope statistics, such as the density function, joint density function, moment function, and level crossing rate, which are relevent to analyses of catastrophic failure, fatigue, and crack propagation in structures, are derived. Applications of the envelope statistics to the prediction of structural reliability under random loadings are discussed in detail.

Yang, J.↗

The ionosphere above Alma Ata during a solar eclipse

The eclipse effect was manifested during the second phase: the ionization of the F1- and F2-layers decreased and the minimum effective heights of E and F2 increased due to recombination processes. The manner in which electron density is distributed over the levels was ascertained from analysis of N(t) curves.

Rudina, M. P.↗

Fabrication of cermet bearings for the control system of a high temperature lithium cooled nuclear reactor

The techniques used to fabricate cermet bearings for the fueled control drums of a liquid metal cooled reference-design reactor concept are presented. The bearings were designed for operation in lithium for as long as 5 years at temperatures to 1205 C. Two sets of bearings were fabricated from a hafnium carbide - 8-wt. % molybdenum - 2-wt. % niobium carbide cermet, and two sets were fabricated from a hafnium nitride - 10-wt. % tungsten cermet. Procedures were developed for synthesizing the material in high purity inert-atmosphere glove boxes to minimize oxygen content in order to enhance corrosion resistance. Techniques were developed for pressing cylindrical billets to conserve materials and to reduce machining requirements. Finishing was accomplished by a combination of diamond grinding, electrodischarge machining, and diamond lapping. Samples were characterized in respect to composition, impurity level, lattice parameter, microstructure and density.

Yacobucci, H. G.↗

Population inversion calculations using near resonant charge exchange as a pumping mechanism.

A theoretical study is conducted to investigate the possibility of obtaining inversions in a plasma of metals such as Mg, Ca, Sr, or Ba by charge exchange with inert gas ions. The gases considered include He, Ne, Xe, Ar, or N. The analysis uses rate equations to calculate the density of the various ion levels and an energy equation to calculate the electron temperature. Both charge exchange and electron collisional excitation of the various ion levels are considered.

Chubb, D. L.↗

Dynamic pressure transducer system for pulsed plasma flow diagnosis.

The response characteristics of high sensitivity piezoelectric pressure transducers suitable for use in the plasma flow induced by megawatt-level electric discharges in low density (less than 1 Torr) gases are described. The uniquely designed probe records the initial impingement of a large magnitude total pressure pulse, followed by the flow of primary interest with order-of-magnitude smaller signals. Effects relating to probe and support accelerations, blast shielding and probe heating are evaluated and accounted for in a probe system with a sensitivity of 40 V/atm.

York, T. M.↗

The extreme ultraviolet spectrum of solar flares

Extreme ultraviolet flare observations are discussed, with particular attention to relative variations of spectral features during flares. An approximately equal enhancement of most chromospheric, transition-zone, and coronal lines indicates that the thermal conduction may be important at temperatures between 100,000 and one million K in the flare plasma. However, enhancements sometimes appear to be somewhat larger for transition-zone lines and for density-sensitive lines arising from metastable levels. EUV lines characteristics of temperatures between 10,000 and 1.5 million K all show a nearly simultaneous rise in impulsive flares, coincident with the hard X-ray burst. Density increases by factors of 5 to 10 in the transition zone are inferred from emission-measure increases and from line ratios for small flares.

Noyes, R. W.↗

The computer simulation of automobile use patterns for defining battery requirements for electric cars

A Monte Carlo simulation process was used to develop the U.S. daily range requirements for an electric vehicle from probability distributions of trip lengths and frequencies and average annual mileage data. The analysis shows that a car in the U.S. with a practical daily range of 82 miles (132 km) can meet the needs of the owner on 95% of the days of the year, or at all times other than his long vacation trips. Increasing the range of the vehicle beyond this point will not make it more useful to the owner because it will still not provide intercity transportation. A daily range of 82 miles can be provided by an intermediate battery technology level characterized by an energy density of 30 to 50 watt-hours per pound (66 to 110 W-hr/kg). Candidate batteries in this class are nickel-zinc, nickel-iron, and iron-air. The implication of these results for the research goals of far-term battery systems suggests a shift in emphasis toward lower cost and greater life and away from high energy density.

Schwartz, H. J.↗

Two-stage, low noise advanced technology fan. Volume 2: Aerodynamic data

Aerodynamic data from static tests of a two-stage advanced technology fan designed to minimize noise are presented. Fan design conditions include delivery of 209.1kg/sec/sq m (42.85 lbm/sec/sq ft) specific corrected flow at an overall pressure ratio of 1.9 and an adiabatic efficiency of 85.3 percent. The 0.836m (2.74ft) diameter first stage rotor has a hub/tip ratio of 0.4 and 365.8m/sec (1200ft/sec) design tip speed. In addition to the moderate tip speed and pressure rise per stage, other noise control design features involve widely spaced blade rows and proper selection of blade-vane ratios. Aerodynamic data are presented for tests with unifrom and with hub and tip radially distorted inlet flow. Aerodynamic data are also presented for tests of this fan with acoustic treatments, including acoustically treated casing walls, a flowpath exit acoustic ring, and a translating centerbody sonic inlet device. A complete tabulation of the overall performance data, the blade element data, and the power spectral density information relating to turbulence levels generated by the sonic inlet obtained during these tests is included. For vol. 1, see N74-33789.

Harley, K. G.↗

A theoretical study of heterojunction and graded band gap type solar cells

A computer program was designed for the analysis of variable composition solar cells and applied to several proposed solar cell structures using appropriate semiconductor materials. The program simulates solar cells made of a ternary alloy of two binary semiconductors with an arbitrary composition profile, and an abrupt or Gaussian doping profile of polarity n-on-p or p-on-n with arbitrary doping levels. Once the device structure is specified, the program numerically solves a complete set of differential equations and calculates electrostatic potential, quasi-Fermi levels, carrier concentrations and current densities, total current density and efficiency as functions of terminal voltage and position within the cell. These results are then recorded by computer in tabulated or plotted form for interpretation by the user.

Sutherland, J. E.↗

Solid polymer electrolyte (SPE) fuel cell technology program, phase 2/2A

Test evaluations were performed on a fabricated single solid polymer electrolyte cell unit. The cell operated at increased current density and at higher performance levels. This improved performance was obtained through a combination of increased temperature, increased reactant pressures, improved activation techniques and improved thermal control over the baseline cell configuration. The cell demonstrated a higher acid content membrane which resulted in increased performance. Reduced catalyst loading and low cost membrane development showed encouraging results.

Source record↗

Metabolic energy requirements during manned orbital Skylab missions

The metabolic balance of nine Skylab astronauts was studied during the course of 28-, 59-, and 84-day flights. Control periods of at least three weeks preceding each flight and at least 18 days following each flight were included in the metabolic studies. Results of the investigation indicated that all members lost mass in flight without experiencing an increase in body density. Analysis of bone density, blood and urinary nitrogen levels, and overall calcium and nitrogen balances suggested that lean body mass declined through loss of protein. It thus appeared that despite adequate energy intake, the crew members did not reach equilibrium with the weightless environment within the time periods studied.

Rambaut, P. C.↗

Oscillator strengths of Cr I lines lying between 200 and 541 nm from hook-method and absorption measurements in a furnace

Measurements of 148 oscillator strengths of neutral chromium transitions were made on Cr vapor in a high-temperature furnace by the hook and absorption methods for strong and weak lines, respectively. With the aid of a 5D-z 5F0 multiplet, the product of the oscillator strengths of the lines of this multiplet with the column densities of their respective lower levels could be determined, and by using estimated oscillator strengths for these lines, all data could be put on a common relative scale. This scale was altered so that the results were matched with relative emission intensities. Results are compared with other authors' results. A correction to the hook method constant was also determined.

Huber, M. C. E.↗

Simultaneous visible and ultraviolet spectroscopy of stellar wind variability in Zeta Puppis

Spectra of He II 4686 A and H-alpha in Zeta Pup were obtained simultaneously with Copernicus ultraviolet scans of several P Cygni profiles in this O4 If supergiant with strong mass loss. The visible-wavelength data show significant variations in the profiles of both lines, consisting of doubling of the emission over times of less than a day. Recent theoretical calculations show that the observed profile variations in 4686 A can be produced by significant fluctuations in the wind density. The Copernicus data show less variability, although in one scan of the 1400-A Si IV doublet there appears to be a significant enhancement of the emission which may be correlated with one of the doublings observed in 4686 A and H-alpha, as though a density enhancement formed at low levels and then moved outward in the wind.

Wegner, G. A.↗

Cosmic ray ionization of the Jovian atmosphere

An approximate form of the Boltzmann equation has been used to obtain local ionization rates due to the absorption of galactic cosmic rays in the Jovian atmosphere. It is shown that the muon flux component of the cosmic-ray-induced cascade may be especially important in ionizing the atmosphere at levels where the total number density exceeds 10 to the 19th per cu cm (well below the ionospheric layers produced by solar EUV). A model containing both positive and negative ion reactions has been employed to compute electron and ion number densities. Peak electron number densities of the order of 1000 per cu cm may be expected even at relatively low magnetic latitudes. The dominant positive ions are NH4(+) and CnHm(+) cluster ions, with n at least 2; it is suggested that the absorption of galactic cosmic-ray energy at such relatively high pressures in the Jovian atmosphere (M about 10 to the 18th to 10 to the 20th per cu cm) and the subsequent chemical reactions may be instrumental in the local formation of complex hydrocarbons.

Capone, L. A.↗

Diurnal, seasonal, and nighttime variations of atomic nitrogen in the equatorial thermosphere

The open source neutral mass spectrometer on board the equatorial Atmosphere Explorer E satellite (AE-E) measured atomic nitrogen densities at frequent intervals during both the elliptical and circular orbit phases of satellite operations. Elliptical orbit data presented here by means of empirical models at 225- and 300-km altitude provide diurnal and seasonal profiles at altitudes lower than previously possible. Data from individual circular orbits later in the AE-E mission confirm essential features of these models, particularly the diurnal density profile. At lower altitudes, considerable variation is evident near midnight, with density enhancements correlated with increasing levels of geomagnetic activity.

Engebretson, M. J.↗

Crossflow effects on steady and fluctuating pressures on an ogive-cylinder cone-frustum model in supersonic separated flow

Wind-tunnel tests were conducted on an ogive-cylinder model with two axisymmetric protuberances having cone frustum angles of cone = 23 deg and 45 deg that were used to generate detached shock waves and the resulting separated flow areas downstream of the shock. The tests were conducted in a 9 by 7 foot supersonic wind tunnel at a free-stream Mach number of 2.0 and at Reynolds numbers of 1.5 x 1 million and 3.9 x 1 million, based on body diameter. The model had an afterbody fineness ratio of 8.3, and the ogive nose had a fineness ratio of 3.0. Two characteristics of the fluctuating pressures in surface vortex flows that result from the crossflow component, (velocity along the tunnel longitudinal axis free stream angle of attack), in combination with changes in the longitudinal pressure gradient were measured: (1) the broadband, rms-pressure coefficients and (2) the power spectral densities. Measurements are presented for various flow regions on the model such as the attached turbulent boundary layer, the detached frustum shock wave, and separated flow areas. The results indicate that the pressure fluctuations around or in the neighborhood of the foci of the vortex flows had broadband intensities and power spectral densities nearly identical to the levels previously measured in separated-flow regions at angles of attack of 0 deg.

Dods, J. B., Jr.↗