Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Impact cratering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Topography of the Martian Impact Crater Tooting

Tooting crater is approx.29 km in diameter, is located at 23.4degN, 207.5degE, and is classified as a multi-layered ejecta crater [1]. Our mapping last year identified several challenges that can now be addressed with HiRISE and CTX images, but specifically the third dimension of units. To address the distribution of ponded sediments, lobate flows, and volatile-bearing units within the crater cavity, we have focused this year on creating digital elevation models (DEMs) for the crater and ejecta blanket from stereo CTX and HiRISE images. These DEMs have a spatial resolution of approx.50 m for CTX data, and 2 m for HiRISE data. Each DEM is referenced to all of the available individual MOLA data points within an image, which number approx.5,000 and 800 respectively for the two data types

Mouginis-Mark, P. J.↗
NASA NTRS2012

Characterization of the Morphometry of Impact Craters Hosting Polar Deposits in Mercury's North Polar Region

Earth-based radar images dating back two decades show that the floors of some polar craters on Mercury host radar-bright deposits that have been proposed to consist of frozen volatiles. Several hypotheses have been put forth to explain their source, including volcanic outgassing, chemical sputtering, and deposition of exogenous water ice. Calculations show that volatiles are thermally stable in permanently shadowed areas. An earlier study of the depths of north polar craters determined with photoclinometric techniques applied to Mariner 10 images yielded the conclusion that the mean ratio of crater depth d to rim-crest diameter D for craters hosting polar deposits is two-thirds that of the mean ratio for a comparable population of neighboring craters lacking such deposits. This result could be explained by (though doesn't require) the presence of a thick layer of volatiles within the polar deposit-hosting craters. Here we use altimetric profiles and topographic maps obtained by the Mercury Laser Altimeter (MLA) to revisit this analysis. MLA is an instrument on the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft, which has been orbiting Mercury since March 2011. MLA transmits a 1064-nm laser pulse at 8 Hz during MESSENGER's trajectory over Mercury s surface. The MLA illuminates surface areas averaging between 15 m and 100 m in diameter, spaced approx 400 m apart along the spacecraft ground track. The radial precision of individual measurements is <1 m, and the current accuracy with respect to Mercury s center of mass is better than 20 m. As of mid-December 2011, MLA coverage had reached to 15 S and has yielded a comprehensive map of the topography of Mercury s northern hemisphere. The MLA data are used here to quantify the shapes of craters in the north polar region and to avoid the shadowing bias of photoclinometric techniques.

Talpe, Matthieu, J.↗
NASA NTRS2012

LU60645GT and MA132843GT Catalogues of Lunar and Martian Impact Craters Developed Using a Crater Shape-based Interpolation Crater Detection Algorithm for Topography Data

For Mars, 57,633 craters from the manually assembled catalogues and 72,668 additional craters identified using several crater detection algorithms (CDAs) have been merged into the MA130301GT catalogue. By contrast, for the Moon the most complete previous catalogue contains only 14,923 craters. Two recent missions provided higher-quality digital elevation maps (DEMs): SELENE (in 1/16° resolution) and Lunar Reconnaissance Orbiter (we used up to 1/512°). This was the main motivation for work on the new Crater Shape-based interpolation module, which improves previous CDA as follows: (1) it decreases the number of false-detections for the required number of true detections; (2) it improves detection capabilities for very small craters; and (3) it provides more accurate automated measurements of craters' properties. The results are: (1) LU60645GT, which is currently the most complete (up to ∼D>=8 km) catalogue of Lunar craters; and (2) MA132843GT catalogue of Martian craters complete up to ∼D>=2 km, which is the extension of the previous MA130301GT catalogue. As previously achieved for Mars, LU60645GT provides all properties that were provided by the previous Lunar catalogues, plus: (1) correlation between morphological descriptors from used catalogues; (2) correlation between manually assigned attributes and automated measurements; (3) average errors and their standard deviations for manually and automatically assigned attributes such as position coordinates, diameter, depth/diameter ratio, etc; and (4) a review of positional accuracy of used datasets. Additionally, surface dating could potentially be improved with the exhaustiveness of this new catalogue. The accompanying results are: (1) the possibility of comparing a large number of Lunar and Martian craters, of e.g. depth/diameter ratio and 2D profiles; (2) utilisation of a method for re-projection of datasets and catalogues, which is very useful for craters that are very close to poles; and (3) the extension of the previous framework for evaluation of CDAs with datasets and ground-truth catalogue for the Moon.

Craters↗
NASA NTRS2020

Constraining Impact Melt Volumes in Young Simple Lunar Craters

Impact cratering is the most ubiquitous geomorphological phenomenon in the solar system. Ponds of once molten material often occupy the bottoms of lunar craters. The melt was originally produced during the intense heat and pressure of impact, and has the potential to give us insight into the physics of impact cratering, as well as potentially encoding information about the materials comprising impacted surfaces. Here, we seek to define a methodology capable of placing an upper bound on simple lunar impact crater melt volumes using Lunar Reconnaissance Orbiter NAC and Kaguya Terrain Camera digital terrain models (DTMs). One prediction we seek to test is that melt production increases with porosity of impacted materials. Previous research suggests impact craters in the more porous, anorthositic highlands contain impact melt ponds of greater volume than those in less porous basaltic maria in craters of comparable diameters.

Chandra, R.↗
NASA NTRS1992

High-resolution Earth-based lunar radar studies: Applications to lunar resource assessment

The lunar regolith will most likely be a primary raw material for lunar base construction and resource extraction. High-resolution radar observations of the Moon provide maps of radar backscatter that have intensity variations generally controlled by the local slope, material, and structural properties of the regolith. The properties that can be measured by the radar system include the dielectric constant, density, loss tangent, and wavelength scale roughness. The radar systems currently in operation at several astronomical observatories provide the ability to image the lunar surface at spatial resolutions approaching 30 m at 3.8 cm and 12.6 cm wavelengths and approximately 500 m at 70 cm wavelength. The radar signal penetrates the lunar regolith to a depth of 10-20 wavelengths so the measured backscatter contains contributions from the vacuum-regolith interface and from wavelength-scale heterogeneities in the electrical properties of the subsurface material. The three wavelengths, which are sensitive to different scale structures and scattering volumes, provide complementary information on the regolith properties. Aims of the previous and future observations include (1) analysis of the scattering properties associated with fresh impact craters, impact crater rays, and mantled deposits; (2) analysis of high-incidence-angle observations of the lunar mare to investigate measurement of the regolith dielectric constant and hence porosity; (3) investigation of interferometric techniques using two time-delayed observations of the same site, observations that require a difference in viewing geometry less than 0.05 deg and, hence, fortuitous alignment of the Earth-Moon system when visible from Arecibo Observatory.

Stacy, N. J. S.↗
NASA NTRS2015

Overview of NASA FINESSE (Field Investigations to Enable Solar System Science and Exploration) Science and Exploration Results

NASA's FINESSE (Field Investigations to Enable Solar System Science and Exploration) project is focused on a science and exploration field-based research program to generate strategic knowledge in preparation for human and robotic exploration of other planetary bodies including our moon, Mars' moons Phobos and Deimos, and near-Earth asteroids. Scientific study focuses on planetary volcanism (e.g., the formation of volcanoes, evolution of magma chambers and the formation of multiple lava flow types, as well as the evolution and entrapment of volatile chemicals) and impact cratering (impact rock modification, cratering mechanics, and the chronologic record). FINESSE conducts multiple terrestrial field campaigns (Craters of the Moon National Monument and Preserve in Idaho for volcanics, and West Clearwater Impact Structure in Canada for impact studies) to study such features as analogs relevant to our moon, Phobos, Deimos, and asteroids. Here we present the science and exploration results from two deployments to Idaho (2014, 2015) and our first deployment to Canada (2014). FINESSE was selected as a research team by NASA's Solar System Exploration Research Virtual Institute (SSERVI). SSERVI is a joint effort by NASA's Science Mission Directorate (SMD) and Human Exploration and Operations Mission Directorate (HEOMD).

FINESSE↗
NASA NTRS1987

Zhamanshin and Aouelloul - Craters produced by impact of tektite-like glasses?

It is shown that the enhanced abundance of siderophile elements and chromium in tektite-like glasses from the two impact craters of Zhamanshin and Aouelloul cannot be explained as a result of contamination of the country rock by meteorites nor, probably, comets. The pattern is, however, like that found in certain Australasian tektites, and in Ivory Coast tektites. It is concluded, in agreement with earlier suggestions by Campbell-Smith and Hey, that these craters were formed by the impact of large masses of tektite-like glass, of which the glasses which were studied are fragments. It follows that it is necessary, in considering an impact crater, to bear in mind that the projectile may have been a glass.

O'Keefe, John A.↗
NASA NTRS2021

Prolonged Rock Exhumation at the Rims of Kilometer-scale Lunar Craters

Fresh impact ejecta deposits on the lunar surface can be characterized as heterogeneous mixtures of boulders, cobbles, and fine-grained regolith that are deposited on the lunar surface during the impact crater formation process. Over time, the surface boulders associated with ejecta deposits break down into fine-grained regolith due to a combination of later impacts and thermal fatigue. Nonetheless, observations of old (>2.0 Ga) kilometer-scale (0.8–2.0 km) lunar impact craters in high-resolution images reveal >1 m boulders along their rims and in their near-proximal ejecta deposits on the lunar maria. Here, we use a combination of radar and thermal-infrared data from the Lunar Reconnaissance Orbiter spacecraft to show that the rims of kilometer-sized impact craters exhibit elevated rock abundances for the lifetime of the lunar maria. We interpret these results as indicating that boulders are continually being uncovered at crater rims due to downslope movement of the overlying regolith. Moreover, rocks found at crater rims that have been exhumed from depth in geologically recent times are locally derived and unlikely to have come from other areas of the Moon. Future collection of lunar samples at crater rims will serve to mitigate the potential for sample contamination from distal sources, helping to ensure accurate geologic interpretations from the collected samples.

moon↗
NASA NTRS2002

Experimental Simulations of Large-Scale Collisions

This report summarizes research on the effects of target porosity on the mechanics of impact cratering. Impact experiments conducted on a centrifuge provide direct simulations of large-scale cratering on porous asteroids. The experiments show that large craters in porous materials form mostly by compaction, with essentially no deposition of material into the ejecta blanket that is a signature of cratering in less-porous materials. The ratio of ejecta mass to crater mass is shown to decrease with increasing crater size or target porosity. These results are consistent with the observation that large closely-packed craters on asteroid Mathilde appear to have formed without degradation to earlier craters.

Housen, Kevin R.↗
NASA NTRS1992

Styles of crater gradation in Southern Ismenius Lacus, Mars: Clues from Meteor Crater, Arizona

Impact craters on the Earth and Mars provide a unique opportunity to quantify the gradational evolution of instantaneously created landforms in a variety of geologic settings. Unlike most landforms, the initial morphology associated with impact craters on both planets is uncomplicated by competition between construction and degradation during formation. Furthermore, pristine morphologies are both well-constrained and similar to a first order. The present study compares styles of graduation at Meteor Crater with those around selected craters (greater than 1-2 km in diameter) in southern Ismenius Lacus. Emphasis is placed on features visible in images near LANDSAT TM resolution (30-50 m/pixel) which is available for both areas. In contrast to Mars, vegetation on the Earth can modify gradation, but appears to influence overall rates and styles by 2X-3X rather than orders of magnitude. Further studies of additional craters in differing settings will refine the effects of this and other factors (e.g., substrate). Finally, by analogy with results from other terrestrial gradational surfaces this study should help provide constraints on climate over crater histories.

Grant, J. A.↗