Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTOPE RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Hydrogen Isotopic Composition of Hydrous Minerals in Particles From Bennu

On September 24, 2023, NASA’s OSIRIS-REx mission delivered to Earth ~121 g of pristine carbonaceous regolith from asteroid Bennu. A first series of mineralogical observations and chemical/isotopic analyses of Bennu aggregate samples (fine to coarse particles up to a few mm) revealed that this material resembles the most chemically primitive chondrites and the samples returned by the JAXA’s Hayabusa2 mission from the carbonaceous asteroid Ryugu. Laboratory studies have confirmed the story gleaned from the spacecraft encounter that Bennu’s rock fragments underwent extensive aqueous alteration and are predominantly composed of hydrated minerals (serpentine, smectite) and other secondary minerals (e.g., magnetite, carbonates). The secondary phases were likely formed under the presence of liquid water on Bennu’s parent asteroid. The isotopic compositions of hydrous minerals and secondary phases can increase our understanding of the source and distribution of water and volatile elements in the protoplanetary disk [e.g., 5-8]. However, direct estimates of the hydrogen isotopic ratios (D/H) in hydrous minerals cannot be obtained easily in primitive rocks due to the difficulty in estimating the organic matter (OM) contribution to the whole H budget. In order to obtain hints on the initial constituents of Bennu’s parent asteroid and to test if Bennu's parent asteroid have formed beyond the snow line (hypothesis 4 of [9]), we measured the D/H and C/H ratios in chondritic matrices by secondary ion mass spectrometry (SIMS) and obtain information on the D/H ratio of water retained in the hydrated minerals. The method also gives clues on the hydrogen isotope variability among different Bennu rock fragments made available for measurement.

L Piani↗
NASA NTRS2015

Sims Analysis of Water Abundance and Hydrogen Isotope in Lunar Highland Plagioclase

The detection of indigenous water in mare basaltic glass beads has challenged the view established since the Apollo era of a "dry" Moon. Since this discovery, measurements of water in lunar apatite, olivine-hosted melt inclusions, agglutinates, and nominally anhydrous minerals have confirmed that lunar igneous materials contain water, implying that some parts of lunar mantle may have as much water as Earth's upper mantle. The interpretation of hydrogen (H) isotopes in lunar samples, however, is controversial. The large variation of H isotope ratios in lunar apatite (delta Deuterium = -202 to +1010 per mille) has been taken as evidence that water in the lunar interior comes from the lunar mantle, solar wind protons, and/or comets. The very low deuterium/H ratios in lunar agglutinates indicate that solar wind protons have contributed to their hydrogen content. Conversely, H isotopes in lunar volcanic glass beads and olivine-hosted melt inclusions being similar to those of common terrestrial igneous rocks, suggest a common origin for water in both Earth and Moon. Lunar water could be inherited from carbonaceous chondrites, consistent with the model of late accretion of chondrite-type materials to the Moon as proposed by. One complication about the sources of lunar water, is that geologic processes (e.g., late accretion and magmatic degassing) may have modified the H isotope signatures of lunar materials. Recent FTIR analyses have shown that plagioclases in lunar ferroan anorthosite contain approximately 6 ppm H2O. So far, ferroan anorthosite is the only available lithology that is believed to be a primary product of the lunar magma ocean (LMO). A possible consequence is that the LMO could have contained up to approximately 320 ppm H2O. Here we examine the possible sources of water in the LMO through measurements of water abundances and H isotopes in plagioclase of two ferroan anorthosites and one troctolite from lunar highlands.

Hui, Hejiu↗
DOE OSTI2025

Impact of T - and ρ -dependent decay rates and new (n, γ ) cross-sections on the s process in low-mass asymptotic giant branch stars

Aims. We study the impact of nuclear input related to weak-decay rates and neutron-capture reactions on predictions for the slow neutron-capture process (s process) in asymptotic giant branch (AGB) stars. We provide the first database of surface abundances and stellar yields of the isotopes heavier than iron from the Monash models. Methods. We ran nucleosynthesis calculations with the Monash post-processing code for seven stellar structure evolution models of low-mass AGB stars with three different sets of nuclear inputs. The reference set has constant decay rates and represents the set used in the previous Monash publications. The second set contains the temperature and density dependence of β decays and electron captures based on the default rates of nuclear NETwork GENerator (NETGEN). In the third set, we further update 92 neutron-capture rates based on re-evaluated experimental cross sections from the ASTrophysical Rate and rAw data Library. We compare and discuss the predictions of the sets relative to each other in terms of isotopic surface abundances and total stellar yields. We also compare the results to isotopic ratios measured in presolar stardust silicon carbide (SiC) grains from AGB stars. Results. The new sets of models result in a ∼66% solar s-process contribution to the p-nucleus 152 Gd, confirming that this isotope is predominantly made by the s process. The nuclear input updates result in predictions for the 80 Kr/ 82 Kr ratio in the He intershell and surface 64 Ni/ 58 Ni, 94 Mo/ 96 Mo, and 137 Ba/ 136 Ba ratios that are more consistent with the corresponding ratios measured in stardust; however, the new predicted 138 Ba/ 136 Ba ratios are higher than the typical values of the SiC grains. The W isotopic anomalies are in agreement with data from the analyses of other meteoritic inclusions. We confirm that the production of 176 Lu and 205 Pb is affected by too large uncertainties in their decay rates from NETGEN.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1992

The (C-12)O/(C-13)O ratio toward Zeta Ophiuchi

A tentative detection of the J = 1 - 0 emission line of (C-13)O has been obtained with SEST from a 24.4 hour integration. The velocity resolution used was 0.23 km/s and the FWHP beamwidth was 45 arcsec. If the (C-13)O line data are conservatively interpreted as an upper limit, the (C-12)O/(C-13)O ratio is not less than 60. Our result supports the previous determination of a large value of the isotope ratio in this cloud, made using radio emission lines with a 1.6-arcmin beam, and extends the ratio based on emission lines to a smaller region. When interpreted as a lower limit, our data is consistent with the ratio obtained from UV absorption line data for (C-12)O and (C-13)O.

Wilson, T. L.↗
NASA NTRS2010

Observations of Molecular Isotope Fractionation in Prestellar Cores

Anomalously fractionated isotopic material is found in many primitive Solar System objects, such as meteorites and comets. It has been suggested that these extreme isotope ratios, are tracers of interstellar chemistry. We will present observations of the nitrogen and carbon fractionation chemistry in dense molecular clouds, particularly in cores where sUbstantial freeze-out of molecules, namely CO, onto dust has occurred. Recent models have suggested that non-depleted species, carbon and nitrogen-rich, may undergo isotopic enhancements in these conditions. The fractionation ratios measured in different interstellar molecules will be discussed and compared to the ratios determined in molecular clouds, comets, and meteoritic material.

Milam, Stefanie N.↗
NASA NTRS1983

FUN with PANURGE - High mass resolution ion microprobe measurements of Mg in Allende inclusions

Isotopic ratios have been determined, at a precision level approaching that of counting statistics using beam switching, by employing PANURGE, a modified CAMECA IMS3F ion microprobe at a mass resolving power of 5000. This technique is used to determine the isotopic composition of Mg and Si and the atomic ratio of Al/Mg in minerals from the Allende inclusion WA and the Allende FUN inclusion C1. Results show enrichment in Mg-26 of up to 260 percent. Results of Mg and Al/Mg measurements on cogenetic spinel inclusion and host plagiclase crystals show Mg-Al isochrons in excellent agreement with precise mineral isochrons determined by thermal emission mass spectrometry. The measurements are found to confirm the presence of substantial excess Mg-26 in WA and its near absence in C1. Data is obtained which indicates a metamorphic reequilibrium of Mg in Allende plagioclase at least 0.6 my after WA formation. Ion probe measurements are obtained which confirm that the Mg composition in Allende C1 is highly fractionated and is uniform among pyroxene, melilite, plagioclase, spinel crystals, and spinel included in melilite and plagioclase crystals.

Huneke, J. C.↗
DOE OSTI2022

Isotopic discrimination of natural and anthropogenic perchlorate sources in groundwater in a semi-arid region of northeastern Oregon (USA)

Perchlorate (ClO 4 - ) has synthetic and natural sources. Synthetic ClO 4 - is released to the environment from its use as an oxidant in military and aerospace applications, and from its presence in a variety of common commercial products, such as safety flares, chlorate herbicides, and fireworks. Natural sources of ClO 4 - in the environment include imported nitrate fertilizers derived from salt deposits in the Atacama Desert of Chile and indigenous natural ClO 4 - that accumulates in unsaturated soils and groundwaters in other arid and semi-arid environments, largely from atmospheric deposition. The stable isotope ratios of chlorine ( 37 Cl/ 35 Cl) and oxygen ( 18 O/ 16 O, 17 O/ 16 O) and the isotopic abundance of radioactive 36 Cl in ClO 4 - can be used to discriminate these different sources. Perchlorate was previously detected at relatively high concentrations (3.8–34.7 μg/L) in groundwater from many wells in the Boardman-Umatilla area near the Columbia River in northeastern Oregon, which is a semi-arid, highly agricultural, heavily irrigated area that includes several past and current military installations. Eight representative groundwater wells were sampled throughout this region and isotopic characteristics of ClO 4 - collected from each well were measured along with other chemical and isotopic parameters including tritium and other groundwater age indicators. We report isotopic data indicate that indigenous natural ClO 4 - was present in groundwater from all sampled wells and was the predominant source in five of the wells. Synthetic ClO 4 - was present in the three remaining wells with natural ClO 4 - , and a minor fraction of Atacama-fertilizer-derived ClO4- was indicated in one of the wells. Data from this study expand the geographic area of the USA in which indigenous natural ClO 4 - has been detected to include the semi-arid northwest. This study also illustrates the role of irrigation recharge as a mechanism for producing relatively high concentrations of indigenous natural ClO 4 - in groundwater by flushing accumulated salts from the unsaturated zone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2015

Sulfur and Oxygen Isotopic Analysis of a Cosmic Symplectite from a Comet Wild 2 Stardust Terminal Particle

Introduction: Analyses of comet 81P/Wild 2 samples re-turned from the Stardust mission have uncovered surprising simi-larities to meteoritic material, including the identification of inner solar system grains [1-3]. The TEM characterization of terminal particle (TP) 4 from Stardust track #147 revealed an assemblage consisting of symplectically intergrown pentlandite and nanocrys-talline maghemite coexisting with high-Ca pyroxene [4]. Mineral-ogically similar cosmic symplectites (COS) containing pentlandite and magnetite in the primitive Acfer 094 meteorite are highly de-pleted in 16O (17O, 18O ~ 180 per mille) [5-7]. This isotopic signature is proposed to record alteration with primordial solar nebula water. Conversely, the normal O isotopic composition of the Stardust COS indicates alteration by a different aqueous reservoir, perhaps on the comet [8]. In this study, we analyzed the Wild 2 COS for S isotopes to further constrain its origin. Experimental: Thin sections of TP4 (12 m) were produced and their mineralogy was thoroughly characterized by TEM. Two of the sections were analyzed for O isotopes by isotopic imaging in the JSC NanoSIMS 50L. The sample in one of the slices was completely consumed. The remaining material in the adjacent slice was analyzed simultaneously for 16O, 32S, 33S, 34S, and 56Fe16O in electron multipliers using a Cs+ primary ion beam. Quasi-simulta-neous arrival (QSA) can have a significant effect on S isotopic ra-tios when using electron multipliers, resulting in undercounting of 32S [9]. Canyon Diablo troilite (CDT) was measured numerous times to deduce a correction factor for QSA and ensure measure-ment reproducibility. Isotopic ratios are reported relative to CDT. Results and Discussion: The Wild 2 COS is enriched in the heavy S isotopes relative to CDT (33S = 6.5 +/- 1.6 per mille; 34S = 5.1 +/- 0.7 per mille; 1). The degree of 33S enrichment indicates mass-inde-pendent fractionation (MIF) with 33S = 3.9 +/- 1.7 per mille. MIF of S has been observed in some chondrules (33S up to 0.11per mille) [10], but this effect has not been identified in sulfides from carbonaceous chondrites [11] or IDPs [12]. S isotopic analysis of Stardust impact craters also did not reveal MIF or anomalies, save for one potential 32S-rich presolar sulfide [13]. Measurement errors on these impact craters were much larger than those in this study, however. MIF of S has been proposed to result from heterogeneities in the solar neb-ula from nucleosynthetic components [14] or photochemical irra-diation of solar nebula gas [10]. Presolar SiC grains are observed to have 32S enrichments [15, 16] contrary to the S isotopic compo-sition of the cometary COS. The S isotopic composition more likely reflects irradiation of nebular gas.

Nguyen, A. N.↗
NASA NTRS1987

Carbon kinetic isotope effect in the reaction of CH4 with HO

The carbon kinetic isotope effect in the CH4 + HO reaction is measured experimentally and the use of carbon isotope ratios to diagnose atmospheric methane is examined. The chemical, photolysis, and analytical experimental conditions and procedures are described. It is determined that the CH4 + HO reaction has a carbon kinetic isotope effect of 1.010 + or 0.007 for k(12)k(13) (rate constants ratio) at 297 + or - 3 K. This value is compared with the data of Rust and Stevens (1980). Causes for the poor correlation between the data at high methane conversions are discussed. It is supposed that the difference between the k(12) and k(13) values is due to a difference in the activation energy of the two reactions.

Davidson, J. A.↗
DOE OSTI2021

Experimental investigation of elemental and isotopic evaporation processes by laser heating in an aerodynamic levitation furnace

In this report we carried out evaporation experiments on a B-type calcium–aluminium-rich inclusion (CAI) melt in a gas-mixing aerodynamic levitation laser furnace, at 1873 K and an oxygen partial pressure of 10 -9.1 atm, for durations ranging from 60 to 600 s. Evaporation of SiO 2 and MgO follow the same trend as those observed in vacuum furnace experiments at the same temperature and starting composition, showing that their evaporation relative to one another from the melt is independent of pressure, oxygen fugacity, and hydrodynamical regime specific to the furnace. Isotopic ratios of Mg and Si in evaporation residues are used to derive fractionation factors of α 26/24 Mg vap-liq = 0.9906± 0.0004 and α 30/28 Si vap-lip = 0.9943±0.0003, which are both significantly closer to unity than those found for evaporation in a vacuum, which translates to less isotope fractionation. The residues are also less isotopically fractionated than expected for cases in which transport of the gas species away from the melt is diffusion-controlled at 1-atm. By analysing the flow regimes in our furnace, we find that advection by the levitating gas is the primary mode of mass transport away from the melt surface, as opposed to diffusion-limited transport in a vacuum or 1-atm tube furnace. A modified Hertz–Knudsen–Langmuir formulation accounts for this process, and shows that isotopic fractionation of both Si and Mg reflect a saturation factor (ratio of the pressure of the evaporating species to vapour saturation pressure) equal to 0.75. This is in perfect accord with recent measurements of Cu isotopic fractionation using a similar furnace. The fact that three elements (Mg, Si, Cu) with varying equilibrium vapour pressures, activity coefficients in the liquid, and diffusion coefficients in the gas have the same scaling behaviour to saturation pressure is a strong indication that the mechanism controlling evaporation is driven by the hydrodynamical regime imposed in the furnace. Therefore, this class of experiments can be used to constrain processes in which advection dominates over diffusion, such as (but not limited to) planetary ejecta, tektites, giant impacts, nebular condensation in a turbulent flow, or nuclear fallout material. Finally, the possibility to reach high temperatures (in excess of 3500 K) in this furnace allows it to be used to evaluate the activity coefficients of melt components in extreme conditions relevant to molten planetary interiors (i.e., magma oceans), with a specific focus on refractory elements.

58 GEOSCIENCES↗
NASA NTRS1994

Mars atmospheric loss and isotopic fractionation by pick-up-ion sputtering and photochemical escape

We examine the effects of loss of constituents of the Martian atmosphere due to sputtering by solar-wind pick-up ions and photochemical escape during the last 3.8 billion years. Sputtering is capable of efficiently removing species from the upper atmosphere to space, including the light noble gases; nitrogen and oxygen are removed by both sputtering ad photochemical processes. Due to diffusive separation (by mass) above the homopause, removal from the top of the atmosphere will fractionate the isotopes of each species, with the lighter isotope being preferentially lost. This allows current measurements of the isotopic ratios to be used as a measure of the atmospheric evolution as integrated over geologic time. For carbon and oxygen, isotopic fractionation is buffered by exchange of atmospheric species with non-atmospheric reservoirs of CO2 and H2O. This allows us to determine the size of the non-atmospheric reservoirs which are capable of mixing with the atmosphere; these reservoirs can be CO2 absorbed in the regolith and/or H2O in the polar ice caps. Such an exchangeable reservoir is required in order to keep the fractionation of the atmospheric gases as low as is observed.

Jakosky, B. M.↗
NASA NTRS1997

Low-temperature carbonate concretions in the Martian meteorite ALH84001: evidence from stable isotopes and mineralogy

The martian meteorite ALH84001 contains small, disk-shaped concretions of carbonate with concentric chemical and mineralogical zonation. Oxygen isotope compositions of these concretions, measured by ion microprobe, range from delta18O = +9.5 to +20.5 per thousand. Most of the core of one concretion is homogeneous (16.7 +/- 1.2 per thousand) and over 5 per thousand higher in delta18O than a second concretion. Orthopyroxene that hosts the secondary carbonates is isotopically homogeneous (delta18O = 4.6 +/- 1.2 per thousand). Secondary SiO2 has delta18O = 20.4 per thousand. Carbon isotope ratios measured from the core of one concretion average delta13C = 46 +/- 8 per thousand, consistent with formation on Mars. The isotopic variations and mineral compositions offer no evidence for high temperature (>650 degrees C) carbonate precipitation and suggest non-equilibrium processes at low temperatures (< approximately 300 degrees C).

NASA Center JSC↗
NASA NTRS2001

Beagle 2: The Next Exobiology Mission to Mars

Beagle 2 is a 60 kg probe (with a 30 kg lander) developed in the United Kingdom for inclusion on the European Space Agency's 2003 Mars Express. Beagle 2 will deliver to the Martian surface a payload which consists of a high percentage of science instruments to landed spacecraft mass. Beagle 2 will be launched in June, 2003 with Mars Express on a Soyuz-Fregat rocket from the Baikonur Cosmodrome in Kazakhstan. Beagle 2 will land on Mars on December 26, 2003 in the Isidis Planitia basin (approximately 10 degrees N and 275 degrees W), a large sedimentary basin that overlies the boundary between ancient highlands and northern plains. Isidis Planitia, the third largest basin on Mars, which is possibly filled with sediment deposited at the bottom of long-standing lakes or seas, offers an ideal environment for preserving traces of life. Beagle 2 was developed to search for organic material and other volatiles on and below the surface of Mars in addition to the study of the inorganic chemistry and mineralogy. Beagle 2 will utilize a mechanical mole and grinder to obtain samples from below the surface, under rocks and inside rocks. A pair of stereo cameras will image the landing site along with a microscope for examination of surface and rock samples. Analyses will include both rock and soil samples at various wavelengths, X-ray spectrometer and Mossbauer spectrometer as well as a search for organics and other light element species (e.g. carbonates and water) and measurement of their isotopic compositions. Beagle 2 has as its focus the goal of establishing whether evidence for life existed in the past on Mars at the Isidis Planitia site or at least establishing if the conditions were ever suitable. Carbonates and organic components were first recognized as existing on Mars when they were found in the Martian meteorite Nakhla. Romanek et al showed the carbonates in ALH84001 were formed at low temperatures. McKay et al noted possible evidence of early life on Mars within the ALH84001 meteorite. Thomas-Keprta et al showed the magnetite biomarkers in ALH84001's carbonates are indistinguishable from those formed by magnetotactic bacteria found on Earth. Gibson et al showed there was significant evidence for liquid water and biogenic products present on Mars across a 3.9 billion year period. A mechanical arm (PAW) operates from the lander and is used for science operations along with sample acquisition. Instruments attached to the PAW include: stereo cameras, Mossbauer instrument, X-ray fluorescence instrument, microscope, environmental sensors, rock corer/grinder, a spoon, mirror, brushes, a mole attachment for acquisition of subsurface to depths of 1 to 2 meters and an illumination device. Each camera has 14 filters which have been optimized for mineralogy composition, dust and water vapor detection. The microscope's camera is designed for viewing the size and shape of dust particles, rock surfaces, microfossils, and characteristics of the samples prior to introduction into the gas analysis package (GAP). The camera has a resolution of 4 microns/pixel, features four color capability (red, green, blue and UV (ultraviolet) fluoresence), a depth of focus of 40 micrometers and translation stage of +3 millimeters. The heart of the Beagle 2's life detection package is the gas analysis package (GAP), which consists of a mass spectrometer with collectors at fixed masses for precise isotopic ratio measurements and voltage scanning for spectral analysis. Primary aim of the GAP is to search for the presence of bulk constituents, individual species, and isotopic fractionations for both extinct and extent life along with studying the low-temperature geochemistry of the hydrogen, carbon, nitrogen and oxygen components on Mars from both the surface and atmosphere. GAP is a magnetic sector mass spectrometer with the range of 1 to 140 amu which can be operated in both the static and dynamic modes. A triple Faraday collector array will be used for C, N and O ratios along with a double Faraday array for H/D. Pulse counting electron multiplier will be utilized for noble gases and selected organics. Anticipated detection limits are at the picomole level for operation in the static mode of operation and high precision isotopic measurements will be made in the dynamic mode. Sample processing and preparation system consists of reaction vessels along with references. Sample ovens capable of being heated are attached to the manifold for sample combustion. Surface, subsurface materials and interior rock specimens will be combusted in pure oxygen gas at various temperature intervals to release organic matter and volatiles. Combustion process will permit detection of all forms and all atoms of carbon present in the samples. A chemical processing system is capable of a variety of conversion reactions. Gases are manipulated either by cryogenic or chemical reactions and passed through the gas handling portion of the vacuum system. There are two modes of operation: quantitative analysis and precise isotopic measurements. Additional information is contained in the original extended abstract.

Gibson, Everett K., Jr.↗
DOE OSTI2021

Neutron Irradiation Induced Changes in Isotopic Abundance of 6Li and 3D Nanoscale Distribution of Tritium in LiAlO2 Pellets Analyzed by Atom Probe Tomography

Tritium, a radioactive isotope of hydrogen is produced by neutron irradiation of 6Li enriched LiAlO2 pellets in Tritium producing burnable absorber rods (TPBARs). Three-dimensional nanoscale mapping of Tritium in irradiated pellets is critical to understand its spatial variation and its association with various microstructural features in the pellets. Spatially resolved analysis of 6Li isotopic enrichment in such ceramic pellets before and after irradiation can provide insights to heterogeneities in Li isotopic distribution. However, Li being a light isotope, its spatially resolved compositional or isotopic analysis is a challenging task to most analytical methods. Here we used atom probe tomography, to evaluate the Li isotopic enrichment in both the LiAlO¬2 matrix and the Li deficient secondary phase LiAl5O8 before irradiation. These results were then compared with 6Li isotopic ratio measured by APT analysis of neutron irradiated pellets to clearly demonstrate the unique capability of APT to quantitatively analyze the isotopic enrichment of 6Li as well as for other light elements present in these materials. Evidence for heterogenous nanoscale distribution of 3H and O3H within irradiated pellet microstructure is also provided, which is attributed to 3H trapping in irradiation induced vacancy clusters or voids within the LiAlO2 matrix. The characterization results given here, now prove the feasibility for using APT for analyzing nanoscale spatially resolved isotopic enrichment of Li as well as other light elements such as Tritium in TPBARs. This work also paves way to adopt APT for analyzing light elements such as Li and tritium in materials used for nuclear fusion reactor applications, geochemistry, astrophysics as well as for energy storage applications.

Devaraj, Arun↗
DOE OSTI2024

An R Shiny graphical user interface for analyzing, visualizing, and interpreting high precision mass spectrometric data

There is currently a lack of software that meets the needs for the analysis of raw data produced by modern isotope ratio mass spectrometers for both R&D and routine use at SRNL and other US national labs • Needs to accommodate multiple isotope systems, instruments, and manufacturers • Include modern statistical methods and handling/visualization of uncertainty • Flexible software with transparent (no “black box”) and reproducible methods • This project is inspired by existing discipline-specific data analysis software (e.g., Tripoli1 , ET_Redux2 , IsoplotR3) used in the geochemical community • Our goal is to build an open source data analysis software package that focuses on flexibility, transparency, and reproducibility

Labone, Elizabeth↗
NASA NTRS1996

Carbon-Based Compounds and Exobiology

The Committee for Planetary and Lunar Explorations (COMPLEX) posed questions related to exobiological exploration of Mars and the possibility of a population of carbonaceous materials in cometary nuclei to be addressed by future space missions. The scientific objectives for such missions are translated into a series of measurements and/or observations to be performed by Martian landers. These are: (1) A detailed mineralogical, chemical, and textural assessment of rock diversity at a landing site; (2) Chemical characterization of the materials at a local site; (3) Abundance of Hydrogen at any accessible sites; (4) Identification of specific minerals that would be diagnostic of aqueous processes; (5) Textual examination of lithologies thought to be formed by aqueous activity; (6) Search for minerals that might have been produced as a result of biological processes; (7) Mapping the distribution, in three dimensions, of the oxidant(s) identified on the Martian surface by the Viking mission; (8) Definition of the local chemical environment; (9) Determination of stable-isotopic ratios for the biogenic elements in surface mineral deposits; (10) Quantitative analysis of organic (non-carbonate) carbon; (11) Elemental and isotopic composition of bulk organic material; (12) Search for specific organic compounds that would yield information about synthetic mechanisms, in the case of prebiotic evolution, and about possible bio-markers, in the case of extinct or extant life; (13) and Coring, sampling, and detection of entrained gases and cosmic-ray induced reaction products at the polar ice cap. A discussion of measurements and/or observations required for cometary landers is included as well.

Kerridge, John↗
NASA NTRS2010

FIB-NanoSIMS-TEM Coordinated Study of a Wark-Lovering Rim in a Vigarano Type A CAI

Wark-Lovering (WL) rims are thin multi layered mineral sequences that surround most Ca, Al-rich inclusions (CAIs). Unaltered WL rims are composed of the same primary high temperature minerals as CAIs, such as melilite, spinel, pyroxene, hibonite, perovskite, anorthite and olivine. It is still unclear whether the rim minerals represent a different generation formed by a separate event from their associated CAIs or are a byproduct of CAI formation. Several models have been proposed for the origins of WL rims including condensation, flashheating, reaction of a CAI with a Mg-Si-rich reservoir (nebular gas or solid); on the basis of mineralogy, abundances of trace elements, O and Mg isotopic studies. Detailed mineralogical characterizations of WL rims at micrometer to nanometer scales have been obtained by TEM observations, but so far no coordinated isotopic - mineralogical studies have been performed. Thus, we have applied an O isotopic imaging technique by NanoSIMS 50L to investigate heterogeneous distributions of O isotopic ratios in minerals within a cross section of a WL rim prepared using a focused ion beam (FIB) instrument. After the isotopic measurements, we determine the detailed mineralogy and microstructure of the same WL FIB section to gain insight into its petrogenesis. Here we present preliminary results from O isotopic and elemental maps by NanoSIMS and mineralogical analysis by FE-SEM of a FIB section of a WL rim in the Vigarano reduced CV3 chondrite.

Cai, A.↗
DOE OSTI2025

An R shiny graphical user interface for highprecision mass spectrometric data analysis

• There is currently a lack of software that meets the needs for the analysis of raw data produced by modern isotope ratio mass spectrometers for both R&D and routine use at SRNL and other US national labs • Needs to accommodate multiple isotope systems, instruments, and manufacturers • Include modern statistical methods and handling/visualization of uncertainty • Flexible software with transparent (no “black box”) and reproducible methods • This project is inspired by existing discipline-specific data analysis software (e.g., Tripoli1 , ET_Redux2, IsoplotR3) used in the geochemical community • Our goal is to build an open source data analysis software package that focuses on flexibility, transparency, and reproducibility

LABONE, ELIZABETH↗