Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTHERMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Isothermal Crystallization of Poly(L-lactide) Induced by Graphene Nanosheets and Carbon Nanotubes: A Comparative Study

Low-dimensional nanoparticles have a strong ability to induce the crystallization of polymer matrices. One-dimensional carbon nanotubes (CNTs) and two-dimensional graphene nanosheets (GNSs), both of which are both carbon-based nanoparticles, provide a good opportunity to investigate the effects of differently dimensional nanoparticles on the crystallization behavior of a polymer. For this purpose, respective nanocomposites of CNTs and GNSs with poly(L-lactide) (PLLA) as matrix were prepared by solution coagulation. Time-resolved Fourier-transform infrared spectroscopy (FTIR) and synchrotron wide-angle X-ray diffraction (WAXD) were performed to probe chain conformational changes and to determine the crystallization kinetics during the isothermal crystallization of the PLLA nanocomposites and neat PLLA, especially in the early stages. Both CNTs and GNSs could serve as nucleating agents in accelerating the crystallization kinetics of PLLA; however, the ability of CNTs to induce crystallization was stronger than that of GNSs. On increasing the content of CNTs from 0.05 to 0.1 wt %, the induction period was shortened and the crystallization rate was enhanced, but the reverse situation was found for GNSs nanocomposites. In the case of neat PLLA, -CH{sub 3} interchain interactions preceded -(COC + CH{sub 3}) interchain interactions during the crystallization. Conversely, in the CNTs and GNSs nanocomposites, the conformational ordering began with -(COC + CH{sub 3}) interchain interactions, which resulted directly in a reduced induction period. Interchain interactions of this type could be explained in terms of surface-induced conformational order (SICO). Finally, the effect of the dimensionality of the nanoparticles on the crystallization behavior of PLLA is discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Robust isothermal electric control of exchange bias at room temperature

Voltage-controlled spin electronics is crucial for continued progress in information technology. It aims at reduced power consumption, increased integration density and enhanced functionality where non-volatile memory is combined with high-speed logical processing. Promising spintronic device concepts use the electric control of interface and surface magnetization. From the combination of magnetometry, spin-polarized photoemission spectroscopy, symmetry arguments and first-principles calculations, we show that the (0001) surface of magnetoelectric Cr{sub 2}O{sub 3} has a roughness-insensitive, electrically switchable magnetization. Using a ferromagnetic Pd/Co multilayer deposited on the (0001) surface of a Cr{sub 2}O{sub 3} single crystal, we achieve reversible, room-temperature isothermal switching of the exchange-bias field between positive and negative values by reversing the electric field while maintaining a permanent magnetic field. This effect reflects the switching of the bulk antiferromagnetic domain state and the interface magnetization coupled to it. The switchable exchange bias sets in exactly at the bulk Neel temperature.

36 MATERIALS SCIENCE↗

Impact of primer dimers and self-amplifying hairpins on reverse transcription loop-mediated isothermal amplification detection of viral RNA

Loop-mediated isothermal amplification (LAMP), coupled with reverse transcription (RT), has become a popular technique for detection of viral RNA due to several desirable characteristics for use in point-of-care or low-resource settings. The large number of primers in LAMP (six per target) leads to an increased likelihood of primer-dimer interactions, and the inner primers in particular are prone to formation of stable hairpin structures due to their length (typically 40-45 bases). Although primer-dimers and hairpin structures are known features to avoid in nucleic acid amplification techniques, there is little quantitative information in literature regarding the impact of these structures on LAMP or RT-LAMP assays. In this study, we examine the impact of primer-dimers and hairpins on previously-published primer sets for dengue virus and yellow fever virus. We demonstrate that minor changes to the primers to eliminate amplifiable primer dimers and hairpins improves the performance of the assays when monitored in real time with intercalating dyes, and when monitoring a fluorescent endpoint using the QUASR technique. We also discuss the thermodynamic implications of these minor changes on the overall stability of amplifiable secondary structures, and we present a single thermodynamic parameter to predict the probability of non-specific amplification associated with LAMP primers.

59 BASIC BIOLOGICAL SCIENCES↗

Nonlinear periodic solutions for isothermal magnetostatic atmospheres

Magnetohydrodynamic equilibria for a plasma in a gravitational field are investigated analytically. For equilibria with one ignorable spatial coordinate, the equations reduce to a single nonlinear elliptic equation for the magnetic potential A, known as the Grad-Shafranov equation. Specifying the arbitrary functions in the latter equation, one obtains three types of nonlinear elliptic equations (a Liouville equation, a sinh Poisson equation, and a generalization of those with a sum of exponentials). Analytical solutions are obtained using the tanh method; this is elaborated in the Appendix. The solutions are adequate to describe an isothermal atmosphere in a uniform gravitational field showing parallel filaments of diffuse, magnetized plasma suspended horizontally in equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Isothermal oxidation behaviors of FeCoV and FeCoVNb alloys

The present study investigates the isothermal oxidation of two iron-cobalt based alloys at 500 deg. C for up to 5000 h. Both alloys exhibit crack-free oxide layers consist of a porosity-free iron rich outer layer and a solute rich inner layer populated with islands of solute oxides and porosities. X-ray diffraction measurements reveal the presence of MO-Fe{sub 2}O{sub 3}-type (where M=Co, Nb, and/or V) spinel structures along with Fe{sub 2}O{sub 3}. Analysis shows that the oxidation follows the parabolic rate law for both alloys with niobium containing alloy exhibiting a higher oxidation rate. Comparison of yield strengths ({sigma}{sub 0}) of oxidized specimens to those aged similarly under an inert atmosphere indicates that two competing mechanisms occur. Surface oxidation decreases the yield strength while precipitation reactions inside the iron-cobalt matrix increase the yield strength of the matrix.

36 MATERIALS SCIENCE↗

Neutron and Proton Radiation Damage and Isothermal Annealing of Irradiated SiC Schottky Power Diodes

NASA is exploring the potential use of nuclear reactors as power sources for future missions. These missions will require semiconductor switches to be placed in close vicinity to the reactor, in the midst of a high neutron and gamma radiation field. Cree SiC Schottky diodes, part number CSD10120A, rated at 10 A and 1200 V, were chosen as the test articles for this radiation-hardness study, since SiC is a wide bandgap semiconductor that has exhibited tolerance for such high radiation environments. As an extension of previous work regarding the degradation of SiC Schottky diodes in the presence of a neutron and gamma radiation field, isothermal annealing experiments were performed on these diodes after they were irradiated in The Ohio State University Research Reactor (OSURR). The experimental results demonstrate that even at an anneal temperature of only 175 C, a noticeable improvement in the electrical performance of the diodes, in the form of decreased series resistance, may be readily observed from I-V curve measurements. Also, since electrical components used for space applications will also be exposed to charged particle radiation from space, such as high energy protons in the Van Allen Radiation Belts surrounding earth, it is important that, in studying the effects of radiation-induced displacement damage, the effects of both neutron and charged particle radiation are considered. Therefore, the data obtained from this study were compared with the data obtained from previous 203 MeV proton irradiations, for which the same diode model was tested. To develop neutron-proton equivalencies which are relevant to the radiation electronics hardening community and the materials science community, comparisons of the degradation of the diodes for proton and neutron irradiation are made in two ways 1) on the basis of displacement damage dose, D{sub d} for protons and neutrons; and 2) on the basis of initially induced vacancies per atom (at a temperature of 0 K)(IIVPA0) for protons and Displacements per Atom (DPA) for neutrons. The equivalencies are especially good when the comparisons are made on the basis of IIVPA0, and DPA.

36 MATERIALS SCIENCE↗

Dressed electrostatic solitary excitations in three component pair-plasmas: Application in isothermal pair-plasma with stationary ions

In this work electrostatic solitary waves in a three component pair-plasma consisting of hot isothermal electrons (or negative fullerene ions), positrons (or positive fullerene ions), and stationary positive ions (say, dust particulates) are studied. Using reductive perturbation method, plasma fluid equations are reduced to a Korteweg-de Vries (KdV) equation. Considering the higher-order nonlinearity, a linear inhomogeneous equation is derived, and the stationary solutions of these coupled equations are achieved by applying the renormalization procedure of Kodama-Taniuti. It is observed that in the linear approximation and applying Fourier analysis, two electrostatic modes, namely, upper or optical and lower or acoustic modes, are present. However, the application of reductive perturbation technique confirms that only acoustic-electrostatic mode can propagate in such plasma as KdV soliton, the amplitude and width of which are studied regarding to plasma parameters {sigma} (positron-to-electron temperature ratio) and {delta} (stationary cold ions-to-electron density ratio). It is also observed that the higher-order nonlinearity leads to deformation of the soliton structure from bell-shaped to W-shaped depending on the variation in values of the plasma parameters {sigma} and {delta}. It is revealed that KdV-type solitary waves cannot propagate in three component pair-plasma when the pair-species temperature is equal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microstructural Evolution and Mechanical Properties of Cold-deformed Al-5Cu Alloy Samples After Isothermal Heat Treatments

Abstract.In this paper, the microscopic morphology of a semi solid Al5Cu alloy by strain induced melt activated (SIMA) process were investigated, and the effects of predeformation, microstructural evolution, aging response and hardness changes were determined. The microstructural observation shows that while the grain boundaries started to appear after 620 deg. C, globular grains surrounded wet boundaries needed for SSP were obtained at 650 deg. C. The grain sizes exhibited ununiformity from the outer surface to the center of the sample because of ununiform predeformation. Although isothermal heat treatments reduced hardness, age hardening gave back the hardness loss.

36 MATERIALS SCIENCE↗

Isothermal, mass-limited rarefactions in planar and spherical geometry

Solutions are developed for isothermal, mass-limited rarefactions in which the temperature is held constant by continued heating. The case of spatially constant temperature and fixed total energy is also revisited. These solutions are useful in the context of experiments in which plasmas are continuously heated for long periods (up to tens of ns) by present-day lasers or hohlraums.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Controlling the column spacing in isothermal magnetic advection to enable tunable heat and mass transfer

Isothermal magnetic advection (IMA) is a recently discovered method of inducing highly organized, non-contact flow lattices in suspensions of magnetic particles, using only uniform ac magnetic fields of modest strength. The initiation of these vigorous flows requires neither a thermal gradient nor a gravitational field, and so can be used to transfer heat and mass in circumstances where natural convection does not occur. These advection lattices are comprised of a square lattice of antiparallel flow columns. If the column spacing is sufficiently large compared to the column length and the flow rate within the columns is sufficiently large, then one would expect efficient transfer of both heat and mass. Otherwise, the flow lattice could act as a countercurrent heat exchanger and only mass will be efficiently transferred. Although this latter case might be useful for feeding a reaction front without extracting heat, it is likely that most interest will be focused on using IMA for heat transfer. In this paper, we explore the various experimental parameters of IMA to determine which of these can be used to control the column spacing. These parameters include the field frequency, strength, and phase relation between the two field components, the liquid viscosity, and particle volume fraction. Finally, we find that the column spacing can easily be tuned over a wide range to enable the careful control of heat and mass transfer.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Glass transition and crystallization kinetics of a barium borosilicate glass by a non-isothermal method

The glass transition and crystallization kinetics of a glass with a molar composition 60BaO-30B{sub 2}O{sub 3}-10SiO{sub 2} were investigated by differential scanning calorimetry (DSC) under non-isothermal conditions. DSC curves exhibited an endothermic peak associated with the glass transition and two partially overlapped exothermic peaks associated with the crystallization of the glass. The dependence of the glass transition temperature (T{sub g}) and of the maximum crystallization temperature (T{sub p}) on the heating rate was used to determine the activation energy associated with the glass transition (E{sub g}), the activation energy for crystallization (E{sub c}), and the Avrami exponent (n). X-ray diffraction (XRD) revealed that barium borate (β-BaB{sub 2}O{sub 4}) was the first crystalline phase to be formed followed by the formation of barium silicate (Ba{sub 5}Si{sub 8}O{sub 21}). The variations of activation energy for crystallization and of Avrami exponent with the fraction of crystallization (χ) were also examined. When the crystallization fraction (χ) increased from 0.1 to 0.9, the value of local activation energy (E{sub c}(χ)) decreased from 554 to 458 kJ/mol for the first exothermic peak and from 1104 to 831 kJ/mol for the second exothermic peak. The value determined for the Avrami exponent was near 2 indicating a similar one-dimensional crystallization mechanism for both crystalline phases. This was confirmed by the morphological studies performed by scanning electron microscopy (SEM) on glass samples heat-treated at the first and at the second crystallization temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Isothermal oxidation behavior of ternary Zr-Nb-Y alloys at high temperature

The effect of yttrium content on isothermal oxidation behavior of Zr-2,5%Nb-0,5%Y, Zr-2,5%Nb-1%Y Zr-2,5%Nb-1,5%Y alloy at high temperature has been studied. High temperature oxidation carried out at tube furnace in air at 600,700 and 800°C for 1 hour. Optical microscope is used for microstructure characterization of the alloy. Oxidized and un oxidized specimen was characterized by x-ray diffraction. In this study, kinetic oxidation of Zr-2,5%Nb with different Y content at high temperature has also been studied. Characterization by optical microscope showed that microstructure of Zr-Nb-Y alloys relatively unchanged and showed equiaxed microstructure. X-ray diffraction of the alloys depicted that the oxide scale formed during oxidation of zirconium alloys is monoclinic ZrO2 while unoxidised alloy showed two phase α and β phase. SEM-EDS examination shows that depletion of Zr composition took place under the oxide layer. Kinetic rate of oxidation of zirconium alloy showed that increasing oxidation temperature will increase oxidation rate but increasing yttrium content in the alloys will decrease oxidation rate.

36 MATERIALS SCIENCE↗

Study of dynamic properties for NaK binary liquid alloy using first principle and theoretical predictions of isothermal bulk modulus using elastic constants

Study of atomic motions in the binary liquid alloys have been studied in terms of dynamical variables like velocity auto correlation, power spectrum and mean square displacement. Elastic constants and isothermal bulk modulus have been calculated to see the effeectiveness of ab-initio pseudopotentials which has been used in this paper. This appraoch is free from the fitting parameters and results obtained using this appraoch have been found very close to the average values.

36 MATERIALS SCIENCE↗

Steady fall of isothermal, resistive-viscous, compressible fluid across magnetic field

This is a basic MHD study of the steady fall of an infinite, vertical slab of isothermal, resistive-viscous, compressible fluid across a dipped magnetic field in uniform gravity. This double-diffusion steady flow in unbounded space poses a nonlinear but numerically tractable, one-dimensional (1D) free-boundary problem, assuming constant coefficients of resistivity and viscosity. The steady flow is determined by a dimensionless number μ{sub 1} proportional to the triple product of the two diffusion coefficients and the square of the linear total mass. For a sufficiently large μ{sub 1}, the Lorentz, viscous, fluid-pressure, and gravitational forces pack and collimate the fluid into a steady flow of a finite width defined by the two zero-pressure free-boundaries of the slab with vacuum. The viscous force is essential in this collimation effect. The study conjectures that in the regime μ{sub 1}→0, the 1D steady state exists only for μ{sub 1}∈Ω, a spectrum of an infinite number of discrete values, including μ{sub 1} = 0 that corresponds to two steady states, the classical zero-resistivity static slab of Kippenhahn and Schlüter [R. Kippenhahn and A. Schlüter, Z. Astrophys. 43, 36 (1957)] and its recent generalization [B. C. Low et al., Astrophys. J. 755, 34 (2012)] to admit an inviscid resistive flow. The pair of zero-pressure boundaries of each of the μ{sub 1}→0 steady-state slabs are located at infinity. Computational evidence suggests that the Ω steady-states are densely distributed around μ{sub 1} = 0, as an accumulation point, but are sparsely separated by open intervals of μ{sub 1}-values for which the slab must be either time-dependent or spatially multi-dimensional. The widths of these intervals are vanishingly small as μ{sub 1}→0. This topological structure of physical states is similar to that described by Landau and Liftshitz [L. D. Landau and E. M. Lifshitz, Fluid Mechanics (Addison-Wesley, Reading, MA, 1959)] to explain the onset of hydrodynamic turbulence. The implications of this MHD study are discussed, with an interest in the prominences in the solar atmosphere and the interstellar clouds in the Galaxy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural-scale levels of development of inelastic martensitic deformation during isothermal loading of submicrocrystalline titanium nickelide in premartensitic condition

The results are presented of an experimental investigation into the regularities and mechanisms of the development of thermoelastic martensitic transformation in submicrocrystalline alloy Ti{sub 49.4}Ni{sub 50.6} with different ways of thermo-power actions using the methods of optical microscopy in situ and X-ray diffraction. The peculiarities of localization of martensite transformation at the meso- and macroscale levels in this alloy with submicrocrystalline structure are considered. Experimental data on the relay mechanism of propagation of the martensitic transformation are presented. The interrelation between the localization of the martensitic transformation on the meso-and macroscale levels and deformation behavior under isothermal loading alloy Ti{sub 49.4}Ni5{sub 0.6} in submicrocrystalline condition are shown and discussed.

36 MATERIALS SCIENCE↗

The deformation and acoustic emission of aluminum-magnesium alloy under non-isothermal thermo-mechanical loading

The following study investigates the deformation behavior and acoustic emission in aluminum-magnesium alloy under conditions of non-isothermal thermo-mechanical loading. The accumulation of deformation in the alloy, in conditions of change from room temperature to 500°C, occurs in two temperature intervals (I, II), characterized by different rates of deformation. The rate of deformation accumulation is correlated with acoustic emission. With load increasing in cycles from 40 to 200 MPa, the value of the boundary temperature (T{sub b}) between intervals I and II changes non-monotonically. In cycles with load up to 90 MPa, the T{sub b} value increases, while an increase up to 200 MPa makes T{sub b} shift toward lower temperatures. This suggests that the shift of boundaries in the region of low temperatures and the appearance of high-amplitude pulses of acoustic emission characterize the decrease of the magnitude of thermal fluctuations with increasing mechanical load, leading to the rupture of interatomic bonds in an elementary deformation act.

36 MATERIALS SCIENCE↗

Nested sampling of isobaric phase space for the direct evaluation of the isothermal-isobaric partition function of atomic systems

Nested Sampling (NS) is a powerful athermal statistical mechanical sampling technique that directly calculates the partition function, and hence gives access to all thermodynamic quantities in absolute terms, including absolute free energies and absolute entropies. NS has been used predominately to compute the canonical (NVT) partition function. Although NS has recently been used to obtain the isothermal-isobaric (NPT) partition function of the hard sphere model, a general approach to the computation of the NPT partition function has yet to be developed. Here, we describe an isobaric NS (IBNS) method which allows for the computation of the NPT partition function of any atomic system. We demonstrate IBNS on two finite Lennard-Jones systems and confirm the results through comparison to parallel tempering Monte Carlo. Temperature-entropy plots are constructed as well as a simple pressure-temperature phase diagram for each system. We further demonstrate IBNS by computing part of the pressure-temperature phase diagram of a Lennard-Jones system under periodic boundary conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗