Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERFEROMETER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Detection of ultrasonic waves in solids by an optical fiber interferometer

An optical fiber interferometer was developed for the detection of ultrasonic waves in solids. The optical paths in both the signal and reference arms of the Mach-Zehnder interferometer are through the cores of similar lengths of single mode fiber mode stripped at both input and output. Instantaneous translation of the pattern is proportional to the localized strain produced by ultrasonic bulk waves generated in the disc and integrated along the fiber path. By spatially filtering the moving fringe pattern and synchronously demodulating the filtered optical intensity distirbution, a signal proportional to the integrated strain is obtained.

Claus, R. O.↗
NASA NTRS1981

Dual differential interferometer for measurements of broadband surface acoustic waves

A simple duel interferometer which uses two pairs of orthogonally polarized optical beams to measure both the amplitude and direction of propagation of broadband ultrasonic surface waves is described. Each pair of focused laser probe beams is used in a separate wideband differential interferometer to independently detect the component of surface wave motion along one direction on the surface. By combining the two output signals corresponding to both components, the two dimensional surface profile and its variation as a function of time is determined.

Turner, T. M.↗
NASA NTRS1982

Sky input horn for a far-infrared interferometer

A unique design has been developed whereby a compound parabolic concentrator (CPC) and a compound elliptical concentrator (CEC) are joined at their throats. The CPC serves as the field-defining optics, in that it accepts up to a certain maximum acceptance angle and then concentrates this accepted energy at its throat. Energy incident from angles greater than the acceptance angle is rejected. The CEC takes the energy concentrated at the CPC throat and then redirects this energy into a finite-sized pupil a given distance away. The considered design will be used as the sky input horn for a cryogenic far-infrared polarizing interferometer to be flown on NASA's Cosmic Background Explorer satellite. The interferometer will operate at 2 K and measure the 3-K cosmic background radiation of the universe in the 100-micrometer-1-cm spectral range.

Miller, M. S.↗
NASA NTRS1984

Holographic Twyman-Green Interferometer

Off-axis Fresnel zone plate used to obtain fringe visibility close to unity. Holographic Twyman-Green Interferometer (HTG) employs off-axis Fresnel zone plate (OFZP) as beam splitter and beam diverger in place of two separate elements that perform those functions in conventional TwymanGreen interferometer.

Chen, C. W.↗
NASA NTRS1981

Dual-beam skin friction interferometer

A portable dual-laser beam interferometer is described that nonintrusively measures skin friction by monitoring the thickness change of an oil film at two locations while said oil film is subjected to shear stress. An interferometer flat is utilized to develop the two beams. Light detectors sense the beam reflections from the oil film and the surface thereunder. The signals from the detectors are recorded so that the number of interference fringes produced over a given time span may be counted.

Monson, D. J.↗
NASA NTRS1981

Application of a laser interferometer skin-friction meter in complex flows

The application of a nonintrusive laser-interferometer skin-friction meter, which measures skin friction with a remotely located laser interferometer that monitors the thickness change of a thin oil film, is extended both experimentally and theoretically to several complex wind-tunnel flows. These include two-dimensional seperated and reattached subsonic flows with large pressure and shear gradients, and two and three-dimensional supersonic flows at high Reynolds number, which include variable wall temperatures and cross-flows. In addition, it is found that the instrument can provide an accurate location of the mean reattachment length for separated flows. Results show that levels up to 120 N/sq m, or 40 times higher than previous tests, can be obtained, despite encountering some limits to the method for very high skin-friction levels. It is concluded that these results establish the utility of this instrument for measuring skin friction in a wide variety of flows of interest in aerodynamic testing.

Monson, D. J.↗
NASA NTRS1983

A laser interferometer for measuring skin friction in three-dimensional flows

A new, nonintrusive method is described for measuring skin friction in three-dimensional flows with unknown direction. The method uses a laser interferometer to measure the changing slope of a thin oil film applied to a surface experiencing shear stress. The details of the method are described, and skin friction measurements taken in a swirling three-dimensional boundary-layer flow are presented. Comparisons between analytical results and experimental values from the laser interferometer method and from a bidirectional surface-fence gauge are made.

Monson, D. J.↗
NASA NTRS1984

Effects of spacecraft reflections on RF interferometer position location accuracy

This report describes one of three study tasks related to the application of an RF interferometer aboard a low-orbiting spacecraft to determine the location of ground-based transmitters. Computer modeling was used to estimate the error in the measured signal angle-of-arrival caused by reflection and diffraction off the spacecraft. Existing computer codes (NEC-BSC) were modified and used to determine the perturbation, due to the spacecraft, in the phase difference between two interferometer antennas, suspended on either side of the spacecraft. This phase perturbation was found as a function of the angle-of-arrival of the signal from a far-field source. The spacecraft antennas were assumed to be circularly polarized with a cardioid pattern. It was found that the perturbation was as much 12.4 deg within the + or - 60 deg field-of-view. This suggests that phase calibration and correction of phase measurements are essential for precision position location using this technique.

Wallace, R. G.↗
NASA NTRS1983

Nd:YAG holographic interferometer for aerodynamic research

A holographic interferometer system has been installed in the NASA Ames 2- by 2-Foot Transonic Wind Tunnel. The system incorporates a modern 10 pps, Nd:YAG pulsed laser which provides reliable operation and is easy to align. The spatial filtering requirements of the unstable resonator beam are described, as well as the integration of the system into the existing schlieren system. A two-plate holographic interferometer is used to reconstruct flow field data. For static wind tunnel models, the single exposure holograms are recorded in the usual manner; however, for dynamic models such as oscillating airfoils, synchronous laser hologram recording is used.

Craig, J. E.↗
NASA NTRS1984

Mesospheric measurements of irregularity patches using a 3-antenna interferometer, part 3.6B

Three events of mesospheric radar returns have been isolated to illustrate the potential of a three-antenna interferometer in the study of the neutral atmosphere. Contour plots of echo intensity and the presence of irregularities in isolated and well-defined regions are shown. These measurements were carried out using the SOUSY radar in the Harz mountains in Germany, on September 9, 1980. The system frequency is 53.5 MHz. Local time is 2 hours in advance of Universal time. The irregularities wavelength is 2.81 m and the three arms of the interferometer were sampled with 167 ms of time difference. To provide precise estimates of vertical velocities, the measured (radial) Doppler shift has to be corrected to subtract the contribution due to the horizontal motions. For near-vertical observations (zenith angle less than about 10 deg) it is readily shown that the rate of change of the measured phases are related to the velocities V sub eq, V sub ns (in the East-West and North-South directions).

Ierkic, H. M.↗
NASA NTRS1985

Rainbow schlieren vs Mach-Zehnder interferometer - A comparison

The rainbow schlieren apparatus is simpler, cheaper, and more easily built to large scale than the interferometer. The accuracies of the two instruments are similar but only if refraction is properly accounted for in interferometry. The measurement thresholds of both instruments are similar. The rainbow schlieren device provides more detailed information because the detection threshold of the rainbow schlieren is an order of magnitude better than that of the interferometer.

Howes, W. L.↗
NASA NTRS1986

Interferometer for Observing Compressible Flow

Moving pictures show changing flow-field contours. Optical interferometer enables instantaneous visualization of compressible fluid flows. Relatively immune to vibration, unit suited to observation of flows over models in large wind tunnels. In improved point-diffraction interferometer, reference beam generated by pinhole (point) diffraction at place in object beam outside experimental volume. Object under test positioned so interior or supporting stand lies in shadows of turning mirrors.

Bacnalo, W.↗
NASA NTRS1986

Lens collimation and testing using a Twyman-Green interferometer with a self-pumped phase-conjugating mirror

Ordinarily Twyman-Green interferometers are employed testing optical elements. In a modification of the basic configuration, the ordinary mirror in the test arm is replaced with a self-pumped phase-conjugating mirror using a barium titanate crystal. It is shown that, with a redefinition of components, the new configuration permits retention and improvement of the optical element testing function while simultaneously serving as a sensitive test for collimation. The optical path difference resulting from the double pass in the original Twyman-Green interferometer approximately equals that of the single pass and phase conjugation in the modification.

Howes, W. L.↗
NASA NTRS1985

Planetary searches using optical astrometric interferometers

The detectability of planets is discussed, and observations made with an astrometric interferometer (AI) at Mount Wilson are presented. Planets are detectable as a result of their periodic perturbation of the position of a central observable star. This detection requires relative astrometric accuracies of about 3 x 10 to the -4th for Jovian planets and about 3 x 10 to the -7th arcsec for terrestrial planets. The principles governing astrometric interferometry are explained, and it is conjectured that a two-color optical AI on earth should be capable of about 0.0001 arcsec rms accuracy for stars brighter than magnitude 7-10; small one-color space systems should achieve at least 0.00001 arcsec. Owing to atmospheric turbulence, two-color systems permit correction every few milliseconds for the random wavefront tilt. A 3.4-meter baseline interferometer on Mount Wilson has demonstrated arcsec rms fluctuations of about 0.02 for 1-sec samples. Space-based optical astrometric interferometry is also discussed.

Staelin, D. H.↗
NASA NTRS1986

Comparison of medium frequency pulsed radar interferometer and correlation analysis winds, part 1

In principle, the interferometer analysis determines the radial velocity and direction of single scatterers provided that each has a sufficiently different Doppler frequency to permit separation by spectral analysis. In fact, scatterers will not have constant radial velocity, and their Doppler frequencies as well as their directions will be modulated by their horizontal motion. Thus, there is a tradeoff between the poorer resolution but less smeared scatterers on shorter records and the higher resolution (longer) records. Three or more non-collinear scatterers are sufficient to determine the wind. It appears that the velocity found from the combined interferometer peaks agrees well with the apparent velocity from correlation methods, but the true velocity is a factor of 2 smaller. This difference might be resolved by searching for scatters showing regular movement between adjacent records.

Meek, C. E.↗
NASA NTRS1986

Comparison of medium frequency pulsed radar interferometer and correlation analysis winds, part 2

In order to test whether the chosen Doppler peaks represent localized scatters in motion, as opposed to some sort of integrated composite, an attempt was made to determine the change in position of single scatterers over a series of sequential records. A four-antenna system was employed which had 1 degree of freedom in phase. Due to limitations N-S linear transmission and E-W linear reception were used. The Doppler frequency peak selection criteria were that at least two of the four power spectra should have a local peak, and that normalized phase discrepancy, should be less than 0.3. The lack of success in tracking individual scatters seems to suggest a short lifetime. If this is the case, then the present experiment is not able to resolve the difference found between the correlation analysis true velocity and the interferometer value. On the other hand, it appears that the interferometer may be of some use in tracking waves.

Meek, C. E.↗
NASA NTRS1986

Fiber-optic interferometer using frequency-modulated laser diodes

This paper describes an electrically passive fiber-optic interferometer which uses dual frequency-modulated laser diodes. Experimental results show that this type of interferometer can attain a displacement range of 100 micron with subnanometer resolution. This technique can serve as the basis for a number of high-precision fiber-optic sensors.

Beheim, G.↗