Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “I:C”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Gallium Oxide Heterojunction Diodes for 400 °C High‐Temperature Applications

β ‐Ga 2 O 3 ‐based semiconductor devices are expected to have significantly improved high‐power and high‐temperature performance due to its ultrawide bandgap of close to 5 eV. However, the high‐temperature operation of these ultrawide‐bandgap devices is usually limited by the relatively low 1–2 eV built‐in potential at the Schottky barrier with most high‐work‐function metals. Herein, heterojunction p ‐NiO/n‐ β ‐Ga 2 O 3 diodes fabrication and optimization for high‐temperature device applications are reported, demonstrating a current rectification ratio ( I ON / I OFF ) of more than 10 6 at 410 °C. The NiO heterojunction diode can achieve higher turn‐on ( V ON ) voltage and lower reverse leakage current compared to the Ni‐based Schottky diode fabricated on the same single‐crystal β ‐Ga 2 O 3 substrate, despite charge transport dominated by interfacial recombination. Electrical characterization and device modeling show that these advantages are due to a higher built‐in potential and additional band offset. These results suggest that heterojunction p–n diodes based on β ‐Ga 2 O 3 can significantly improve high‐temperature electronic device and sensor performance.

Sohel, Shahadat H.↗
DOE OSTI2022

Oxidation Resistance in 1200°C Steam of a FeCrAl Alloy Fabricated by Three Metallurgical Processes

Abstract FeCrAl alloys are a leading candidate material for accident tolerant fuel cladding due to their good performance in both normal light-water reactor operating conditions as well as their resilience to high-temperature accident scenarios. For commercial-scale production, new fabrication techniques need to be investigated. In this study, the effects of fabrication methods on the high-temperature steam oxidation performance of C26M (Fe12Cr6Al2Mo in wt.%) were investigated. Three variants of C26M were manufactured: wrought (cast and forged) (WC26M), powder metallurgy hot isostatic pressing (PMC26M), and laser powder bed fusion additive manufacturing (AMC26M). All three variants were exposed to steam at 1200°C for 2 h. Results showed no significant variation in mass change between the variants after steam exposure. All three variants effectively formed stable protective alumina films with ~0.6–1.3 µ m thickness. This study suggests FeCrAl alloys have excellent resilience to high-temperature steam in nuclear reactor accident scenarios regardless of the fabrication method.

Materials Science↗
DOE OSTI2021

Cement hydration kinetics study in the temperature range from 15 °C to 95 °C

The heat evolution during the hydration of cement was examined by multiple calorimetric methods: isothermal, oscillating isothermal, as well as temperature scanning tests in the temperature range from 15 °C to 95 °C. The apparent activation energy (E{sub a}) of several different types of cements were all found to decrease significantly with temperature. Type of additives and water to cement ratio had little influence on the temperature dependence of E{sub a}. The correlation between E{sub a} and temperature may be mathematically simplified to a step function, where E{sub a} is a nonzero constant below a critical temperature (T{sub cr}) and reduces to zero above that temperature. The proposed model of E{sub a} was combined with a scale factor model to simulate the influence of curing temperature on the hydration kinetics of cement with significantly improved accuracy compared to an earlier model.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A study on texture stability and the biaxial creep behavior of as-hydrided CWSR Zircaloy-4 cladding at the effective stresses from 55 MPa to 65 MPa and temperatures from 300°C to 400°C

The creep rupture of high burnup used nuclear fuel (> 45 GWD/MTU) cladding is regarded as one of the failure mechanisms during long-term dry storage. A high amount of zirconium hydride in the cladding matrix would degrade the mechanical properties of the cladding especially leading to delayed hydride cracking. To better understand the influence of zirconium hydride on the biaxial thermal creep performance and the crystalline texture stability of Zircaloy-4 cladding, the pressurized tube technique is applied to test the durability of the as-hydrided material. Tests were performed on as-received Zircaloy-4 tubular specimens as well as-hydrided ones with targeted 300 wt parts per million (wppm) or 750 wppm hydrogen. The biaxial creep experiments were conducted at temperatures from 300 degrees C to 400 degrees C and at equivalent stresses at mid-wall from 55 MPa to 65 MPa. The hydridation process prior to creep tests induces the formation of FCC delta-hydride platelets along the circumferential direction of the tube. This alignment and phase structure of hydride show no significant change after biaxial creep tests. The creep strain-rate negatively depends on the hydrogen content. The synchrotron wide-angle X-ray diffraction (WAXD) technique and electron backscatter diffraction (EBSD) analysis were applied for the study of the crystallographic orientation relationship. zirconium-to-hydride grain orientation follows Shoji-Nishiyama crystallographic relationship. This relationship is stable before and after creep deformation. These results of creep performance and texture stability of Zircaloy-4 claddings can help support the design basis of interim and long-term dry storage facilities.

creep↗
DOE OSTI2023

Crystal structure of meglumine diatrizoate, (C 7 H 18 NO 5 )(C 11 H 8 I 3 N 2 O 4 )

The crystal structure of meglumine diatrizoate has been solved and refined using synchrotron X-ray powder diffraction data and optimized using density functional theory techniques. Meglumine diatrizoate crystallizes in space group P2 1 (#4) with a = 10.74697(4), b = 6.49364(2), c = 18.52774(7) Å, β = 90.2263(3), V = 1292.985(5) Å 3 , and Z = 2. Two different crystal structures, which yielded essentially identical refinement residuals and positions of the non-H atoms, were obtained. The differences were in the H atom positions and the hydrogen bonding. One structure was 123.0 kJ/mol/cell lower in energy than the other and was adopted for the final description. The crystal structure consists of alternating double layers of cations and anions along the c-axis. The hydrogen bonds link the cations and anions into a three-dimensional framework. Each of the hydrogen atoms on the ammonium nitrogen of the cation acts as a donor in a strong N–H∙∙∙O hydrogen bond. One of these is to a hydroxyl group of another cation, and the other is to the carboxylate group of the anion. Each of the amide nitrogen atoms of the anion forms a strong N–H∙∙∙O intermolecular hydrogen bond, one to a carbonyl and the other to a carboxylate group. The powder pattern has been submitted to ICDD for inclusion in the Powder Diffraction File™ (PDF®).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Recombination between 13 C and 2 H to Form Acetylide ( 13 C 2 2 H – ) Probes Nanoscale Interactions in Lipid Bilayers via Dynamic Secondary Ion Mass Spectrometry: Cholesterol and GM 1 Clustering

Although it is thought that there is lateral heterogeneity of lipid and protein components within biological membranes, probing this heterogeneity has proven challenging. The difficulty in such experiments is due to both the small length scale over which such heterogeneity can occur, and the significant perturbation resulting from fluorescent or spin labeling on the delicate interactions within bilayers. Atomic recombination during dynamic nanoscale secondary ion imaging mass spectrometry (NanoSIMS) is a non-perturbative method for examining nanoscale bilayer interactions. Atomic recombination is a variation on conventional NanoSIMS imaging, whereby an isotope on one molecule combines with a different isotope on another molecule during the ionization process, forming an isotopically enriched polyatomic ion in a distance-dependent manner. In this work, we show that the recombinant ion, 13 C 2 2 H – , is formed in high yield from 13 C- and 2 H-labeled lipids. The low natural abundance of triply labeled acetylide also makes it an ideal ion to probe GM 1 clusters in model membranes and the effects of cholesterol on lipid–lipid interactions. We find evidence supporting the cholesterol condensation effect as well as the presence of nanoscale GM 1 clusters in model membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

In Situ Visualization of Local Distortions in the High- T c Molecule-Intercalated Li x (C 5 H 5 N) y Fe 2– z Se 2 Superconductor

A time-resolved synchrotron X-ray total scattering study sheds light on the evolution of the different structural length scales involved during the intercalation of the layered iron–selenide host by organic molecular donors, aiming at the formation of the expanded-lattice Li x (C 5 H 5 N) y Fe 2– z Se 2 hybrid superconductor. The intercalates are found to crystallize in the tetragonal ThCr 2 Si 2 -type structure at the average level, however, with an enhanced interlayer iron–selenide spacing ( d = 16.2 Å) that accommodates the heterocyclic molecular spacers. Quantitative atomic pair distribution function (PDF) analysis at variable times suggests distorted FeSe 4 tetrahedral local environments that appear swollen with respect to those in the parent β-FeSe. Simultaneously acquired in situ synchrotron X-ray powder diffraction data disclose that secondary phases (α-Fe and Li 2 Se) grow significantly when a higher lithium concentration is used in the solvothermal reaction or when the solution is aged. These observations are in line with the strongly reducing character of the intercalation medium’s solvated electrons that mediate the defect chemistry of the expanded-lattice superconductor. In the latter, intralayer correlated local distortions indicate electron-donating aspects that reflect in somewhat enlarged Fe–Se bonds. Additionally, they also reveal a degree of relief of chemical pressure associated with a large distance between Fe and Se sheets (“taller” anion height) and a stretched Fe–Fe square planar topology. The elongation of the latter, derived from the in situ PDF study, speaks for a plausible increase in the Fe-site vacancy concentration. The evolution of the local structural parameters suggests an optimum reaction window where kinetically stabilized phases resemble the distortions of the edge-sharing Fe–Se tetrahedra, required for a high- T c in expanded-lattice iron-chalcogenides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Reactions of U(DMSO) 8 (ClO 4 ) 4 with Terpyridine Yield Dimeric Hydrolysis Products and Induce C–C Coupling

Reactions have been carried out using UIV(DMSO) 8 (ClO 4 ) 4 with 2,2′:6′,2″-terpyridine (terpy) under nonaqueous conditions. At room temperature in acetonitrile, the combination of the U(IV) starting material with terpy resulted in a mixture containing [UO 2 (DMSO) 2 terpy][ClO 4 ] 2 ·MeCN, while increasing the water content led to the hydrolysis products [(UO 2 (DMSO)terpy) 2 (μ 2 –O)][ClO 4 ] 2 and [(UO 2 terpy) 2 (μ 2 –OH) 2 ][ClO 4 ] 2 ·MeCN·H 2 O. Performing the reaction at slightly elevated temperature with no added water led to the formation of [UO 2 sexipyridine][ClO 4 ] 2 ·MeCN. This new uranyl complex contains the hexadentate ligand 2,2′:6′,2″:6″,2″:6‴,2⁗:6⁗,2⁗′-sexipyridine, which formed in situ from the tetravalent uranium starting material, where photoexcited uranyl or in situ generated peroxide could have induced C–C coupling. Analysis of bonding in the dimeric uranyl species via quantum chemical methods revealed a small increase in covalency of the bridging oxo unit and a slightly greater stability compared to the bridging hydroxo compound, which causes a significant shift in the uranyl symmetric stretch in the Raman spectrum. Structural, spectroscopic, and computational comparisons are made across the series of compounds, providing insight into the bonding and reactivity of uranium in nonaqueous media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Improved Accuracy in Semi-Experimental Structure Determination by Resolving Problems Associated with Rotation of Principal Inertial Axes of Isotopologues: Structures of 1,3-Oxazole ( c -C 3 H 3 NO)

The rotational spectrum of the normal isotopologue of 1,3-oxazole (c-C 3 H 3 NO) was observed from 43 to 750 GHz. Over 3900 transitions for the ground vibrational state are measured, assigned, and least-squares fit to sextic centrifugally distorted-rotor Hamiltonians. The measured frequencies and resulting spectroscopic constants from this extended spectral range, combined with previous measurements of the nuclear quadrupole coupling constants, will facilitate astronomical searches for oxazole across the majority of the range of modern radiotelescopes. Spectra for a set of 30 oxazole isotopologues, which include multiple isotopic substitutions of each atom, are used to determine the first semi-experimental equilibrium ($r$$^{SE}_{e}$) structure and semi-experimental substitution structure ($r$$^{SE}_{e}$), each using CCSD(T) computed values for the vibration–rotation interaction and electron-mass corrections. The large number of isotopologues, including 21 isotopologues observed for the first time, and the redundant substitutions of each atom provide sufficient spectroscopic information to determine the $r$$^{SE}_{e}$ structure with the expected high level of accuracy and precision (0.0001 or 0.0002 Å in bond distances and 0.013 to 0.025° in bond angles). In the course of this study, we analyzed a known issue for some $r$$^{SE}_{e}$ structure determinations of near-oblate asymmetric tops in which inclusion of individual isotopologues degrades the structure determination. We demonstrate that this problem primarily arises from the difference in the values of the computed vibration–rotation interaction corrections as evaluated at the computed re geometry vs the $r$$^{SE}_{e}$ geometry of the “real” molecule. Our solution to this problem substantially improves the $r$$^{SE}_{e}$ structure of oxazole and likely can be generalized to many other molecules.

Chemical structure↗
DOE OSTI2023

Computational Screening of Supported Metal Oxide Nanoclusters for Methane Activation: Insights into Homolytic versus Heterolytic C–H Bond Dissociation

Since its discovery in zeolites, the [CuOCu] 2+ motif has played an important role in our understanding of selective methane activation over supported metal oxide nanoclusters. Although there are two known C-H bond dissoci-ation mechanisms, namely homolytic and heterolytic cleavage, most computational studies on optimizing metal oxide nanoclusters for improved methane activation reactivity have focused only on the homolytic mechanism. In this work, both mechanisms were examined for a set of 21 mixed metal oxide complexes of the form of [M 1 OM 2 ] 2+ (M 1 , M 2 = Mn, Fe, Co, Ni, Cu, Zn). Except for pure copper, heterolytic cleavage was found to be the dominant C-H bond activation pathway for all systems. Furthermore, mixed systems including [CuOMn] 2+ , [CuONi] 2+ , and [CuOZn] 2+ are predicted to possess similar methane activation activity as pure [CuOCu] 2+ . Furthermore, these results suggest that both homolytic and heterolytic mechanisms should be considered in computing methane activation energies on supported metal oxide nanoclusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Accessing Organonitrogen Compounds via C–N Coupling in Electrocatalytic CO 2 Reduction

Given the limited product variety of electrocatalytic CO 2 reduction reactions solely from CO 2 and H 2 O as the reactants, it is desirable to expand the product scope by introducing additional reactants that provide elemental diversity. The integration of inorganic heteroatom-containing reactants into electrocatalytic CO 2 reduction could in principle enable the sustainable synthesis of valuable products, such as organonitrogen compounds, which have widespread applications but typically rely on NH 3 derived from the energy-intensive and fossil-fuel-dependent Haber-Bosch process for their industrial scale production. Here, in this Perspective, research progress towards building C-N bonds in N-integrated electrocatalytic CO 2 reduction is highlighted, and the electrosyntheses of urea, acetamides, and amines are examined from the standpoint of reactivity, catalyst structure, and most fundamentally, mechanism. Mechanistic discussions of C-N coupling in these advances are emphasized and critically evaluated, with the aim of directing future investigations on improving the product yield and broadening the product scope of N-integrated electrocatalytic CO 2 reduction.

electrochemical reduction↗
DOE OSTI2023

Chemical Recycling of Thiol Epoxy Thermosets via Light-Driven C–C Bond Cleavage

Epoxy thermosets are high-volume materials that play a central role in a wide range of engineering applications; however, technologies to recycle these polymers remain rare. Here, we present a catalytic, light-driven method that enables chemical recycling of industrially relevant thiol epoxy thermosets to their original monomer at ambient temperature. This strategy relies on the proton-coupled electron transfer (PCET) activation of hydroxy groups within the polymer network to generate key alkoxy radicals that promote the fragmentation of the polymer through C–C bond β-scission. The method fully depolymerizes insoluble thiol epoxy thermosets into well-defined mixtures of small-molecule products, which can collectively be converted into the original monomer via a one-step dealkylation process. Notably, this process is selective and efficient even in the presence of other commodity plastics and additives commonly found in commercial applications. Finally, these results constitute an important step toward making epoxy thermosets recyclable and more generally exemplify the potential of PCET to offer a more sustainable end-of-life for a diverse array of commercial plastics.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Mechanism of O 2 /NO-Promoted Oxidative C–C Bond Cleavage in Linear Alkanes

Selective oxidation of alkanes to oxygenated products remains a fundamental challenge, particularly if the goal is to promote C−C bond cleavage while minimizing formation of CO 2 . Oxidation conditions that use O 2 and nitrogen oxides (NO x ) have been shown to be very effective in promoting radical-mediated functionalization and oxidative carbon−carbon cleavage in saturated hydrocarbon polymers, such as polyethylene. Here, we investigate the mechanism of O 2 /NO-mediated oxidation of ndecane as a prototypical linear alkane substrate. These reactions enable identification and quantification of reactive intermediates, including nitrites, nitrates, alcohols, and ketones. Under the reaction conditions, these species convert into common ketone intermediates that evolve into α-diketones and other α-functionalized ketones, which undergo further conversion into carboxylic acids. Infrared (IR) spectroscopy indicates that HDPE oxidation proceeds through similar key intermediates. Together, these findings establish a mechanistic framework for NO x -mediated alkane oxidation and provide a foundation for the development of broadly applicable oxidative transformations.

Anions↗
DOE OSTI2021

High-performing commercial Fe–N–C cathode electrocatalyst for anion-exchange membrane fuel cells

Here, to reduce the cost of fuel cell stacks and systems, it is important to create commercial catalysts that are free of platinum group metals (PGMs). To do this, such catalysts must have very high activity, but also have the correct microstructure to facilitate the transport of reactants and products. Here, we show a high-performing commercial oxygen reduction catalyst that was specifically developed for operation in alkaline media and is demonstrated in the cathode of operating anion-exchange membrane fuel cells (AEMFCs). With H 2 /O 2 reacting gases, AEMFCs made with Fe–N–C cathodes achieved a peak power density exceeding 2 W cm –2 (>1 W cm –2 with H 2 /air) and operated with very good voltage durability for more than 150 h. These AEMFCs also realized an iR-corrected current density at 0.9 V of 100 mA cm –2 . Finally, in a second configuration, Fe–N–C cathodes paired with low-loading PtRu/C anodes (0.125 mg PtRu per cm 2 , 0.08 mg Pt per cm 2 ) demonstrated a specific power of 10.4 W per mg PGM (16.25 W per mg Pt).

25 ENERGY STORAGE↗