SEARCH · Engineering Papers

Results for “High Temperature Reactor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Ongoing Data Platform Development for High-Temperature Gas-cooled Reactor (HTGR) Thermal-Fluid Experiments Supported by Nuclear Energy University Program (NEUP) [Presentation Slides]

There are in total 30NEUP projects focusing on the thermal-fluid experiments related with High-Temperature Gas-cooled Reactor (HTGR) from FY2009 to FY2021, producing a large amount of high-quality validation data, however, these valuable data has been scattering everywhere and not been disseminated to the community well, and final reports are available only from OSTI webpage. This could potentially be a huge waste, not only for government budget but also for the HTGR research community. To improve access to this HTGR validation data and optimize the return on the significant investment made by DOE and supported by the Advanced Reactor Technologies (ART) Gas-Cooled Reactor (GCR) program, we conducted a survey to assess completed and ongoing HTGR NEUP projects with the aim to develop a public-access data platform that can be used to retrieve code validation data and guide future NEUP investments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

Hydrogen uptake in graphite matrix at high temperature

Tritium management is a critical challenge for the next generation of nuclear reactors, such as Fluoride Salt Cooled High Temperature Reactors (FHRs) and High Temperature Gas-cooled Reactors (HTGRs), due to the higher production rate (up to 10,000 times) than conventional Light Water Reactors (LWRs). Graphitic materials employed as moderator, reflector, and fuel pebbles offer a potential pathway for tritium recovery by serving as a sink for tritium. Prediction of uptake capacity under reactor relevant conditions remains a challenge due to a lack of low partial pressure data and significant inter-grade variability of graphite. This study addresses these gaps by providing a comprehensive characterization of hydrogen (as a tritium surrogate) uptake and release behavior in the A3-3 graphite matrix (GM) used in fuel pebbles. Uptake measurements are performed at reactor relevant temperatures of 600- 800 °C, 1-200 Torr hydrogen pressure, and 15-120 min equilibration time, followed by thermal desorption spectroscopy up to 1100 °C. Uptake experiments at different equilibration times demonstrate the role of kinetics in hydrogen uptake, which can be modeled as a diffusion-with-trapping process. In the thermodynamics limit, the Sips adsorption model is shown to capture the uptake in A3-3 GM well. Our campaign provides a set of new results for hydrogen uptake in A3-3, including limiting uptake capacity at 600 °C, apparent diffusion coefficient at 600 °C, and the first estimates of the FHR/HTGR relevant (600 °C, 20 Pa partial pressure) equilibrium uptake capacity and time to saturation. Desorption data highlights a new site for hydrogen uptake, not observed in nuclear graphite, which we attribute to the non-graphitized binder. Using the Kissinger method, we estimate activation energy for release from the desorption peaks, confirming the activation energy for release from the basal planes and providing the first estimate for the activation energy of release from the binder.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Fluoride-Cooled High-Temperature Pebble-Bed Reactor Reference Plant Model

In this report we present work performed in Fiscal Year 2022 that demonstrates the modeling and simulation of a fully coupled neutronics thermal hydraulics reference plant model for a fluoride-cooled high-temperature pebble-bed reactor. The multiphysics model is developed on the Nuclear Regulatory Commission’s Comprehensive Reactor Analysis Bundle (BlueCRAB) available on the Idaho National Laboratory’s high-performance computer, which natively and seamlessly couples Griffin, Pronghorn, and the BISON Multiphysics Object-Oriented Simulation Environment based applications. Griffin provides reactor physics capabilities, including depletion to the equilibrium core, k-eigenvalue, adjoint, and transient. The unique direct equilibrium core capability in Griffin is based on a streamline methodology to spatially deplete the pebbles into burnup groups. Pronghorn solves the porous medium equations for the fluid regions and conduction in the solid regions and incorporates a fluidic diode model to simulate the transition from forced to natural convection during accident scenarios. MOOSE modules solves thermal conduction problems for the pebbles and tristructural isotropic in the pebble-bed core, thus providing the fuel and moderator spatial fields for each pebble burnup group. The neutronics feedback relies primarily on fuel, moderator, and reflector temperatures as as well as the FLiBe salt density. Here, we present results for the uncoupled equilibrium core and perform comparisons to equivalent Monte Carlo models. The power distributions and kinetic parameters obtained with Griffin are consistent with those computed with Griffin. We demonstrate a noticeable improvement with the use of discrete ordinates method (SN) transport. The coupled steady-state equilibrium core provides the initial condition for two time-dependent problems: a control rod withdrawal event and an unprotected loss of flow event. In both cases, the reactor design is self-stabilizing and the solutions are consistent with the expected physics. Although this model is prototypical regarding BlueCRAB’s capabilities, its results are consistent with published work by Kairos Power and other research entities. Significant improvements to the model are planned in future work.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2022

Development of a Data Platform for High-Temperature Gas-cooled Reactor (HTGR) Nuclear Energy University Program (NEUP) Thermal-Fluid Experiments

Since the U.S. Department of Energy (DOE)’s Office of Nuclear Energy (NE) initiated the Nuclear Energy University Program (NEUP) in 2009, a total of 30 NEUP projects focused on High-Temperature Gas-cooled Reactor (HTGR) thermal-fluid experiments were funded up to fiscal year (FY) 2021. This represents a total DOE investment of approximately $23M over the 12-year period, covering thermal fluid phenomena important to both pebble bed and prismatic HTGR designs. The NEUP projects have produced a large amount of high-quality experimental and computational data that were published in final project reports, journal articles, dissertations, and conference proceedings, but in most cases the actual data sets and supporting information such as facility and instrumentation descriptions were not publicly disseminated to the HTGR community. To the authors’ best knowledge, a data platform that organizes and summarizes these NEUP-funded projects for HTGR research does not currently exist. To improve access to this HTGR validation data and optimize the return on the significant investment made by DOE, the Advanced Reactor Technologies (ART) Gas-Cooled Reactor (GCR) program started a survey of completed and ongoing HTGR NEUP projects with the aim of developing a public-access data platform that can be used to retrieve computational fluid dynamics (CFD) and system code validation data and guide future NEUP investments. This paper summarizes the status of the current ART-GCR database, provides an overview of the NEUP-funded HTGR-related research projects from FY2009 to FY2021 and identify validation knowledge gaps still existing in HTGR thermal-fluid research.

42 ENGINEERING↗

DOE OSTI2022

High-Temperature Gas-Cooled Reactor Research Survey and Overview: Preliminary Data Platform Construction for the Nuclear Energy University Program

Since the U.S. Department of Energy Office of Nuclear Energy initiated the Nuclear Energy University Program (NEUP) in 2009, there are 29 NEUP projects focusing on high-temperature gas-cooled reactor (HTGR) research up to July 2022. The resultant research product, either experimental or computational, were published as final NEUP reports, journal articles and conference proceedings. However, these federally funded products have been scattered and sometimes cannot be easily accessed. To improve access to this valuable HTGR validation data and optimize the return on the significant investment made by the Department of Energy, the Advanced Reactor Technologies (ART) Gas-Cooled Reactor (GCR) program started a survey of completed and ongoing HTGR NEUP projects to develop a public-access database specific for HTGRs applications that can be used to retrieve computational fluid dynamics and system code validation data. This effort will help guide future NEUP-funded research, define new state of the ART Phenomena Identification and Ranking Table (PIRT), and promote the usage of this data in the codes validation matrices. This report provides an overview of the NEUP-funded HTGR-related research projects from Fiscal Year (FY) 2009–2021 and identifies validation knowledge gaps still existing in HTGR thermal-fluid research. A preliminary data platform has been developed for the 29 NEUP projects investigating HTGR thermal hydraulics, including their final reports as well as the available scientific publications. As an ultimate goal for this work, the ART-GCR program will create a central database at Idaho National Laboratory to identify, organize, and store these datasets generated by experimental investigations or computational models, experimental facility descriptions, and publicly-available academic products from the HTGR-related NEUP projects and provide future guidance for the storage and transmission of important project documentations for later NEUP projects as well.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Thermal Fluid Modeling Approaches in SAM for High Temperature Gas-Cooled Reactor Applications

This paper provides an overview of the unique modeling and simulation challenges and needs in the system and safety analysis of two common types of High Temperature Gas-cooled Reactor (HTGR) designs. The challenges are associated with the complex core geometry configurations and the change of the dominant heat removal mechanisms between normal operating conditions and decay heat removal transients. This requires that simulation tools utilize models with reasonable length scales and capture both the localized heat transfer and the core-scale heat transfer at the same time. To meet such analysis needs, different methodologies were developed. In conclusion, this includes adopting existing methods and further developing/improving them, as well as proposing innovative methods that leverage advanced computational frameworks such as the Multiphysics Object Oriented Simulation Environment (MOOSE).

HTGR↗

DOE OSTI2024

Development of Data Reporting Standards for High-Temperature Gas-cooled Reactor (HTGR) Nuclear Energy University Program (NEUP) Thermal-Fluid Experiments

Since 2009, the U.S. Department of Energy (DOE) Office of Nuclear Energy's Nuclear Energy University Program (NEUP) has been at the forefront of nuclear research, specifically concentrating on advancing high-temperature gas-cooled reactor (HTGR) technologies. By Fiscal Year 2023, NEUP has authorized 35 projects dedicated to HTGR research, each contributing significantly to the enhancement of our understanding of this technology. The outcomes of these diverse projects have been disseminated through final NEUP reports, peer-reviewed journal articles, and presentations at academic conferences, forming a comprehensive tapestry of knowledge. Despite the substantial value of these findings, their dissemination has been fragmented, posing challenges for accessibility to researchers and policymakers and leading to underutilization of DOE investments. Recognizing this critical gap and its potential consequences for the future of nuclear research, the Advanced Reactor Technologies (ART) Gas-Cooled Reactor (GCR) program conducted an extensive survey of completed and ongoing HTGR NEUP projects. This survey enabled the compilation of crucial data, resulting in the development of a specialized public-access database tailored for computational fluid dynamics and system code validation, specifically designed for HTGR applications. However, the data collection process revealed a significant challenge in central data organization due to individual researchers from different institutes employing varying logics and preferences for recording and documenting experimental data. Consequently, an urgent need has been identified to establish a standardized reporting format for HTGR experimental projects. Addressing this issue is essential for enhancing collaboration, maximizing the impact of DOE investments, and ensuring the seamless advancement of HTGR technologies in nuclear research.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2023

Development of Porous Yttrium Hydride as an Increased-Performance and Reduced-Cost Microreactor Moderator

Explore the source record for details and available documents.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Design and optimization of flexible decoupled high-temperature gas-cooled reactor plants with thermal energy storage

Advanced nuclear power plants are well-positioned for future zero-carbon grids, however, the need for flexible power generation will be required over the traditional emphasis on baseload generation for meeting historical demands. To achieve such flexibility, this work examines viable configurations for coupling nuclear energy production with thermal energy storage. Previous designs on nuclear-thermal energy storage configurations for advanced reactor designs, which utilized reactor steam as the heat source for charging the thermal energy storage, are restricted by the heat diversion ratio and efficiency losses, thus their impacts can be limited. In this context, this study proposes configurations for fully decoupling the nuclear reactor from the power cycle and positioning the storage as an intermediate loop, thereby achieving an unconstrained heat diversion ratio and improved efficiency. Compared with a standard high-temperature gas-cooled reactor’s power cycle, steady-state thermodynamic modeling and dispatch optimizations quantify the benefits of a steam reheat cycle within the fully decoupled thermal energy system to separate the plant cycle from the high-pressure primary side. These benefits are further detailed, compatible with required high-temperature and high-pressure conditions, through (1) open-source dynamic transient models that examine the impact of off-design operation on the systems, (2) the investigation of components design and costing and finally (3) sizing and dispatch optimization. The fully-decoupled design achieves a cycle efficiency of 43.1%, an enhancement over the vendor’s standard efficiency of 42.2% (Xe-100 design). Here, the proposed design offers strengthened physical barriers from the nuclear island as well as superior operational flexibility and power boosting. Dispatch optimization and market analysis reveal that thermal energy storage size is highly dependent on the peak patterns of electricity prices and the minimum generation level constraint imposed on the balance of plant. Evaluation of off-design operation demonstrates that the full decoupling design with the suggested fail-safe control mechanisms ensures a minimal impact on reactor parameters, even during rapid power ramping.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2023

Feasibility Study of Advanced Manufacturing Techniques and Compositions of High Entropy Alloys

In line with the objectives of Department of Energy’s Office of Nuclear Energy Advanced Materials and Manufacturing technologies program (AMMT), this work focuses on new materials development and qualification research and development for next-generation, high-temperature nuclear reactors. While the currently qualified nuclear materials have demonstrated significant irradiation resistance at high temperatures, the community is still interested in materials that can sustain the harsh environments found in nuclear reactors for temperatures up to 1,000°C for nearly 100,000 hours. High entropy alloys (HEAs) have the potential to serve in these extreme environments of next generation nuclear reactors due to their unique phase transformation pathways and nanoscale and mesoscale microstructures. The current work focuses on understanding such nuclear energy relevant HEAs through a detailed literature survey and developing a decision matrix with criteria for identification of HEAs with may have most impact and value for further examination.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Phenomena Identification and Ranking Tables for High Temperature Gas-Cooled Microreactors

Micro-scaled high-temperature gas-cooled reactors (micro-HTGRs) offer a promising option for reliable power in remote or off-grid locations. While the safety characteristics of modular HTGRs have been widely studied, a micro-HTGR configuration alters several key thermal-fluid phenomena that govern both normal operation and passive decay-heat removal. In many proposed concepts, the reactor vessel is oriented horizontally and integrated into an ISO shipping container to enhance transportability and modular deployment. This report documents a Phenomena Identification and Ranking Table (PIRT) exercise focused on the thermal hydraulic safety phenomena relevant to all micro-HTGRs. The objective is to systematically identify, describe, and rank the importance, uncertainty, and modeling complexity of the key phenomena that control core and vessel temperatures during normal operation, pressurized conduction cooldown (PCC), and depressurized conduction cooldown (with air ingress) conditions.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2021

Modeling of the High Temperature Test Facility Using RELAP-7

The High Temperature Test Facility (HTTF) at Oregon State University (OSU) is an electrically heated, helium cooled, experimental facility. The HTTF was modeled using RELAP-7 in both 1-D and 3-D for validation. Due to core symmetry, 1/6th of the HTTF core was modeled in 3-D using the coupled heat conduction and forced convection capabilities of RELAP-7. This served as a validation case for RELAP-7 and its capabilities to model advanced nuclear technologies such as high temperature gas-cooled reactors.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2024

UZrCN Synthesis via Arc Melting - A Novel Synthesis Study

The next generation of nuclear reactors for both power production and space nuclear propulsion require fuel that is more durable, thermally stable, and more thermally conductive to support rapid heat transfer. High temperature gas reactors (HTGR), advanced gas reactors (AGR), and space-based nuclear thermal propulsion (NTP) are advanced reactor concepts that require a fuel type that can withstand high temperatures (1000-2900K) and flow of corrosive gas coolants such as helium, hydrogen, and carbon dioxide. One fuel with the potential to meet these demanding requirements is uranium-zirconium-carbonitride (UZrCN). UZrCN has many favorable fuel qualities compared to other eligible fuel forms such as uranium dioxide (UO2) and uranium mononitride (UN) that could support the aforementioned reactor concepts. UZrCN has an exceptionally high operating temperature and thermal conductivity which are highly desirable to improve reactor economics and safety. It far exceeds the properties of UO2 which is the most common fuel form in the United States. UZrCN also surpasses UN in terms of thermal conductivity and operating temperature by eliminating the dissociation problem UN has at 1700K. UZrCN could improve gas reactor performance and enable NTP technologies; however, it is an under-researched fuel that lacks rigorous scientific study. In recent efforts by the Idaho National Laboratory, a variety of novel methods to produce this fuel composition have been explored. One such method is via arc melting of uranium, zirconium, and carbon under a nitrogen atmosphere. Alloy fabrication using arc melting has been utilized for close to 150 years now and is well-understood as a method for rapid alloy prototyping. This process will be used to perform in-situ nitriding to form UZrCN.

36 MATERIALS SCIENCE↗

DOE OSTI2024

UZrCN Formation via Arc Melting – A Novel Synthesis Study

36 MATERIALS SCIENCE↗

DOE OSTI2024

UZrCN Synthesis via Arc Melting

The next generation of nuclear reactors for both power production and space nuclear propulsion require fuel that is more durable, thermally stable, and more thermally conductive to support rapid heat transfer. High temperature gas reactors (HTGR), advanced gas reactors (AGR), and space-based nuclear thermal propulsion (NTP) are advanced reactor concepts that require a fuel type that can withstand high temperatures (1000-2900K) and flow of corrosive gas coolants such as helium, hydrogen, and carbon dioxide. One fuel with the potential to meet these demanding requirements is uranium-zirconium-carbonitride (UZrCN). UZrCN has many favorable fuel qualities compared to other eligible fuel forms such as uranium dioxide (UO 2 ) and uranium mononitride (UN) that could support the aforementioned reactor concepts. UZrCN has an exceptionally high operating temperature and thermal conductivity which are highly desirable to improve reactor economics and safety. It far exceeds the properties of UO 2 which is the most common fuel form in the United States. UZrCN also surpasses UN in terms of thermal conductivity and operating temperature by eliminating the dissociation problem UN has at 1700K. UZrCN could improve gas reactor performance and enable NTP technologies; however, it is an under-researched fuel that lacks rigorous scientific study. In recent efforts by the Idaho National Laboratory, a variety of novel methods to produce this fuel composition have been explored. One such method is via arc melting of uranium, zirconium, and carbon under a nitrogen atmosphere. Alloy fabrication using arc melting has been utilized for close to 150 years now and is well-understood as a method for rapid alloy prototyping. This process will be used to perform in-situ nitriding to form UZrCN.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2025

Destructive PIE and Safety Testing of Six AGR-5/6/7 Capsule 2 Compacts

This study evaluates fission product retention and particle failure mechanisms in AGR-5/6/7 Capsule 2 uranium carbide and uranium oxide (UCO) tristructural isotropic (TRISO) fuel under high-temperature gas reactor accident-relevant conditions using high-temperature safety tests and destructive postirradiation examination. Three Capsule 2 compacts were held isothermally at 1600°C for approximately 300 hours and one compact at 1800°C for approximately 300 hours; two additional compacts were examined in the as-irradiated state. Post-test deconsolidation–leach–burn–leach (DLBL) quantified nuclide inventories in matrix and particles. Individual particles were surveyed for radioisotope inventories, and microanalytical approaches resolved microstructural evolution and fission product distributions within the coating layers. At 1600°C, no krypton was detected above the minimum detectable limit, and cesium releases were far below a single particle equivalent, indicating the absence of full TRISO failure or SiC failures. Silver releases were limited and primarily reflected depleted postirradiation inventories, consistent with prior compact-level exams indicating substantial in-pile 110mAg loss. At 1800°C, cumulative 134Cs release of approximately 2.5 particle equivalents and delayed 85Kr totaling approximately 0.53 particle equivalents were consistent with one full TRISO failure and two SiC failures. Europium and strontium releases were roughly one order of magnitude higher than at 1600°C and comparable to AGR-1/AGR-2 high-temperature tests, with sustained late-hold rates indicating diffusion through intact coatings coupled with matrix depletion. Overall, AGR-5/6/7 Capsule 2 UCO fuel demonstrated fission product retention during safety testing consistent with prior AGR campaigns, while distinctive in-pile 110mAg depletion and measurable 1600°C europium loss motivate targeted follow-on studies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2025

Destructive PIE and Safety Testing of Six AGR-5/6/7 Capsule 2 Compacts

This study evaluates fission product retention and particle failure mechanisms in AGR-5/6/7 Capsule 2 uranium carbide and uranium oxide (UCO) tristructural isotropic (TRISO) fuel under high-temperature gas reactor accident-relevant conditions using high-temperature safety tests and destructive post-irradiation examination. Three Capsule 2 compacts were held isothermally at 1600°C for approximately 300 hours and one compact at 1800°C for approximately 300 hours; two additional compacts were examined in the as-irradiated state. Post-test deconsolidation–leach–burn–leach (DLBL) quantified nuclide inventories in matrix and particles. Individual particles were surveyed for radioisotope inventories, and microanalytical approaches resolved microstructural evolution and fission product distributions within the coating layers. At 1600°C, no krypton was detected above the minimum detectable limit, and cesium releases were far below a single particle equivalent, indicating the absence of full TRISO failure or SiC failures. Silver releases were limited and primarily reflected depleted post-irradiation inventories, consistent with prior compact-level exams indicating substantial in-pile 110m Ag loss. At 1800°C, cumulative 134 Cs release of approximately 2.5 particle equivalents and delayed 85 Kr totaling approximately 0.53 particle equivalents were consistent with one full TRISO failure and two SiC failures. Europium and strontium releases were roughly one order of magnitude higher than at 1600°C and comparable to AGR-1/AGR-2 high-temperature tests, with sustained late-hold rates indicating diffusion through intact coatings coupled with matrix depletion. Overall, AGR-5/6/7 Capsule 2 UCO fuel demonstrated fission product retention during safety testing consistent with prior AGR campaigns, while distinctive in-pile 110m Ag depletion and measurable 1600°C europium loss motivate targeted follow-on studies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2025

Development of High-Temperature Bonding Techniques to Enable High-Temperature Static or Dynamic Strain Measurements

Current light-water nuclear reactors rely on a variety of different sensors and sensor applications to meet their structural health monitoring needs throughout the entirety of the reactor primary, secondary, and containment systems. Optical fiber–based sensor technologies could provide solutions to reduce the sensor system footprint while enhancing the measurement fidelity and spatial resolution by leveraging distributed monitoring techniques. Moreover, advanced reactors may require optical fiber–based sensors for structural health monitoring because their operating temperatures will exceed the limits of conventional transducers used to acquire dynamic strain or acoustic data in nuclear power plants. Therefore, this report describes experiments targeting the development of high-temperature bonding techniques that would allow for potentially long lengths of fibers to be bonded to metallic reactor components in advanced reactor systems. The high temperatures experienced within target application, next-generation nuclear reactors, necessitate a high-temperature resistant bond to limit the amount of tension on the fiber at the target application temperature. The primary bonding method investigated in this work is brazing; hot-rolling has also been investigated to a lesser extent. Both techniques are well-suited to bonding optical fibers to large reactor components such as primary coolant piping, pressure vessels, or heat exchangers. Optical frequency domain reflectometry was used to monitor the strain in metal-coated optical fibers before, during, and after the high-temperature bonding process. On select optical fibers that were successfully bonded, additional thermal cycling was performed to assess the extent to which the fiber remained bonded based on the expected thermal expansion of the test specimen material. The results of the various experiments yielded the following general conclusions: (1) brazing is a viable technique for bonding and allows significant compressive strain to be applied to the fiber at room temperature; (2) hot-rolling is a viable technique as well, which has been more optimized than the brazing technique for bonding, but less residual compressive strain has been observed with this technique; and (3) both techniques will need further development and optimization to demonstrate bonding of a long length of fiber that can provably operate at relevant temperatures for an advanced nuclear reactor application.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗