Numerical Modeling of Emergency Hydrogen Refueler for Fuel Cell Electric Vehicles.
Abstract not provided.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided.
Low-cost green hydrogen can be achieved by integrating utility-scale wind farms to an electrolyzer. The power produced by a wind farm depends on spatial and temporal changes in the wind, and this variability can affect the electrolyzer's performance. This study examines the trade-offs between two electrolyzer configurations: a large centralized electrolyzer connected to the wind farm versus several smaller distributed electrolyzers connected directly to each wind turbine. The results show that a centralized configuration generates more hydrogen because turbines that are waked and produce less power are compensated but other un-waked turbines.
Explore the source record for details and available documents.
The mixture-averaged thermal diffusion model originally proposed by Chapman and Cowling is validated using multiple flame configurations. Simulations using detailed hydrogen chemistry are done on one-, two-, and three-dimensional flames. The analysis spans flat and stretched, steady and unsteady, and laminar and turbulent flames. Quantitative and qualitative results using the thermal diffusion model compare very well with the more complex multicomponent diffusion model. Comparisons are made using flame speeds, surface areas, species profiles, and chemical source terms. Once validated, this model is applied to three-dimensional laminar and turbulent flames. For these cases, thermal diffusion causes an increase in the propagation speed of the flames as well as increased product chemical source terms in regions of high positive curvature. The results illustrate the necessity for including thermal diffusion, and the accuracy and computational efficiency of the mixture-averaged thermal diffusion model.
As a result of corrosion during normal operation in nuclear reactors, hydrogen can enter the zirconium-alloy fuel cladding and precipitate as brittle hydride platelets, which can severely degrade the cladding ductility. Under a heterogeneous temperature distribution, hydrides tend to accumulate in the colder areas, creating local spots of degraded cladding that can favor crack initiation. Therefore, an estimation of the local hydride distribution is necessary to help predict the risk of cladding failure. The hydride distribution is governed by three competing phenomena. Hydrogen in solid solution diffuses under a concentration gradient due to Fick’s law and under a temperature gradient due to the Soret effect. Precipitation of the hydride platelets occurs once the hydrogen solubility limit is reached. A model of these phenomena was implemented in the 3D fuel performance code BISON in order to calculate the hydrogen distribution for arbitrary geometries, such as a nuclear fuel rod, and is now available for BISON users. Simulations have been performed on simple geometries to validate the model and its implementation. The simulations predict that before precipitation occurs, hydrogen tends to accumulate in the colder spots due to the Soret effect. Once the solubility limit is reached, hydrogen precipitates and forms a rim close to the outer edge of the cladding. The simulations also predict that the reactor shut down has little effect on already precipitated hydrides but causes the remaining hydrogen to precipitate homogeneously into hydrides.
Benchmarking and validation are prerequisites for using simulation codes as predictive tools. In this work, we have developed a Global Model for Negative Hydrogen Ion Source (GMNHIS) and performed benchmarking of the GMNHIS against another independently developed code, Global Enhanced Vibrational Kinetic Model (GEVKM). This is the first study to propose a quite comprehensive benchmarking test of this kind for models of negative hydrogen ion sources (NHIS), and excellent agreements have been achieved for collisional energy loss per electron-ion pair created, electron number density, electron temperature, densities of H$^{+}_{3}$ and H$^{+}_{2}$ ions, and densities of H(n = 1–3) atoms. Very small discrepancies in number densities of H - ions and H + ions, as well as the vibrational distribution function of hydrogen molecules, can be attributed to the differences in the chemical reactions datasets. The GEVKM includes additional chemical reactions that are more important at high pressures. Moreover, we validated the GMNHIS against experimental data obtained in an electron cyclotron resonance discharge used for H - production. The model qualitatively (and even quantitatively for certain conditions) reproduces the experimental H - number density. The H - number density as a function of pressure first increases at pressures below 1.6 Pa and then saturates for higher pressures. This dependence was analyzed by evaluating contributions from different reaction pathways to the creation and loss of the H - ions. The developed codes can be used for predicting the H - production, improving the performance of NHIS, and ultimately optimizing the parameters of negative ion beams for fusion reactors.
It is paramount to accurately access the risk of facilities and machinery that use hydrogen. Towards this effort, this report surveys and compares existing models for the ignition of unintended hydrogen releases, typically leaks. These models are primarily formed on expert experience and perhaps a few points of data. As such, this report provides suggestions for improvement in ignition probability modeling, both in terms of experimentation and incident collection as well as modeling.
A fixed bed reactor was designed, modeled and simulated for hydrogen storage on-board the vehicle for PEM fuel cell applications. Ammonia Borane (AB) was selected by DOE's Hydrogen Storage Engineering Center of Excellence (HSECoE) as the initial chemical hydride of study because of its high hydrogen storage capacity (up to {approx}16% by weight for the release of {approx}2.5 molar equivalents of hydrogen gas) and its stability under typical ambient conditions. The design evaluated consisted of a tank with 8 thermally isolated sections in which H2 flows freely between sections to provide ballast. Heating elements are used to initiate reactions in each section when pressure drops below a specified level in the tank. Reactor models in Excel and COMSOL were developed to demonstrate the proof-of-concept, which was then used to develop systems models in Matlab/Simulink. Experiments and drive cycle simulations showed that the storage system meets thirteen 2010 DOE targets in entirety and the remaining four at greater than 60% of the target.
Much of the work involved the Ames 16-Inch Shock Tunnel facility. The facility was reactivated and upgraded, a data acquisition system was configured and upgraded several times, several facility calibrations were performed and test entries with a wedge model with hydrogen injection and a full scramjet combustor model, with hydrogen injection, were performed. Extensive CFD modeling of the flow in the facility was done. This includes modeling of the unsteady flow in the driver and driven tubes and steady flow modeling of the nozzle flow. Other modeling efforts include simulations of non-equilibrium flows and turbulence, plasmas, light gas guns and the use of non-ideal gas equations of state. New experimental techniques to improve the performance of gas guns, shock tubes and tunnels and scramjet combustors were conceived and studied computationally. Ways to improve scramjet engine performance using steady and pulsed detonation waves were also studied computationally. A number of studies were performed on the operation of the ram accelerator, including investigations of in-tube gasdynamic heating and the use of high explosives to raise the velocity capability of the device.
Collisional radiative (CR) models for molecular hydrogen are of high relevance for performing qualitative and quantitative analysis of excited-state population densities measured in plasmas or predicting the dependence of plasma emission on parameter variations. Although the development of such models for H 2 started decades ago, major uncertainties still exist regarding the most important set of input parameters, namely the cross sections for electron-impact excitation. The deviations between cross sections from different datasets are particularly pronounced in the energy region close to the threshold energy, strongly increasing the uncertainty of CR models applied to low-temperature plasmas. This paper presents experimental validation of a set of newly calculated non ro-vibrationally resolved electron-impact cross sections calculated for the triplet system of H 2 using the molecular convergent close-coupling method in the adiabatic-nuclei formulation. These cross sections are implemented into a CR model based on the flexible solver Yacora. A first comparison of CR calculations with the different datasets to experimentally-determined population densities is performed at a planar ICP discharge for varying pressure (between 1 and 10 Pa) and RF power (between 700 and 1100 W). For the experimentally-accessible electron temperature and density range (2.5–10 eV and 1.8–3.3 × 10 16 m –3 , respectively), very good agreement between the model and experiment is obtained using the new data set, in contrast to previously used cross sections.
This proposal includes several updates to the hydrogen system and transportation technologies that were performed between June 2022 and June 2023: hydrogen combustion turbines for backup electricity; updated medium and heavy-duty truck costs; charging infrastructure costs for BEV LDVs; nuclear-hydrogen production update; revision to industrial energy use's hydrogen cogeneration technology; hydrogen emissions and fugitive emissions. It is a follow-up to Core Model Proposal 359.
Model calculations for the brightness of the sodium cloud in Region A were performed to clarify the role played by the plasma torus sink in producing the east-west intensity asymmetry observed in the sodium D-lines. It was determined that the east-west electric field, proposed by Barbosa and Kievelson (1983) and Ip and Goertz (1983) to explain the dawn-dusk asymmetry in the torus ion emissions measured by the Voyager UVS instrument, could also produce the east-west sodium intensity asymmetry discovered earlier by Bergstralh et al. (1975, 1977). Model results for the directional features of the sodium cloud are also reported. The completion of the development of the Io potassium cloud model, progress in improving the Titan hydrogen torus model, and efforts in developing our model for hydrogen cometary atmospheres are also discussed.
A computer model of the JPL hydrogen maser frequency standard was developed. This model allows frequency stability data to be generated, as a function of various maser parameters, many orders of magnitude faster than these data can be obtained by experimental test. In particular, the maser performance as a function of the various automatic tuning servo parameters may be readily determined. Areas of discussion include noise sources, first-order autotuner loop, second-order autotuner loop, and a comparison of the loops.
Diffusion models for chemically reacting air Couette flow with hydrogen injection
A Two Fluid Model (TFM) using kinetic theory of granular flow has been developed to describe an innovative process of hydrogen production in a single step. An extended Multi-species of Solid Phase (MSP) method is proposed to simulate the gas-solid heterogeneous reactions in an entrained flow gasifier, as opposed to Single-species of Solid Phase (SSP) in previous studies. The intrinsic equations of methane steam reforming and water-gas shift reactions are used for a good understanding of the reaction mechanism for high concentration of hydrogen production under higher pressure. On the basis of the results of computing, the main feature of core-annular reaction zone is predicted in the fully developed flow region. And the similar flame-like structure for velocity and temperature is observed to emerge from the feed injection zone at the bottom of gasifier. The model well illustrates the effects of CaO on enhancing the concentration of hydrogen and sequestering CO{sub 2} in the process of coal gasification. The advantages of pressure gasification are also shown that coal conversion increases with increasing pressure while H{sub 2}S concentration and tar content decreases. Moreover, there is a steep increase in H{sub 2}S and tar species initiated from the entrance of gasifier and then a decrease at the next section. The model shows good agreement with the measurements of flow field and gas products concentration in laboratory-scale plants.
Correlated wavefunction theory predicts and high-resolution crystal structure analysis confirms the important, stabilizing effect of simultaneous hydrogen bond donor and acceptor interactions in proteins.
Phenomenological CALPHAD (CALculation of PHAse Diagrams) models, widely used for multicomponent materials, often contain a considerable number of parameters and require fitting using data from a relatively small number of experimental measurements or theoretical calculations. Sometimes these parameters are introduced for the purpose of improving model fits but without clear physical justification, which leads to overparametrized models with poor generalization performance. Automated approaches for optimal model selection based on the available data therefore become critical. Here, in this work, a least absolute shrinkage and selection operator (LASSO)-based approach is developed for model selection by leveraging the linearity of the CALPHAD model with respect to its parameters to convert the model selection and fitting to a LASSO minimization problem. We demonstrate its utility for thermodynamic modeling of thermochemical hydrogen (TCH) production materials using lanthanum strontium manganite (LSM) as an example. Various TCH-relevant properties, including oxygen stoichiometry as a function of oxygen partial pressure, enthalpy of reduction, and entropy of reduction, are successfully predicted with reasonable accuracy using a minimal set of model parameters. Importantly, the model selection and fitting involve minimal human decision; it can therefore be applied to high-throughput DFT defect calculations and yield efficient workflows for TCH material modeling and optimization.