SEARCH · Engineering Papers
Results for “Group Processes”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
ASME Design Code Rule Changes for Nuclear Graphite
The American Society of Mechanical Engineers Boiler Pressure and Vessel Code (ASME BPVC) Section III, Division 5, Article HHA-3000 outlines graphite core component and graphite core assembly design guidelines. Graphite core components are defined as ?components manufactured from graphite that are installed to form a graphite core assembly within the reactor pressure vessel of a high temperature, graphite moderated fission reactor.? (p. 413) Graphites? inherent defect distributions do not allow for deterministic material reliability. Rather, graphite has variable strength distributions which change by grade. Article HHA-3000 outlines two semi-probabilistic methods, the full and simplified assessments, which set design load limit targets for each of three component structural reliability classes. The Design Task Group was officially recognized as a specialized task group within ASME November of 2023, though we?ve been collaborating since 2022. The purpose of the Design Task Group is to correct, clarify, and make HHA-3000 function as intended. The Design Task Group will sunset once we?ve achieved our objectives. The Design Task Group was specifically told to not write new Code. While there may be more precise and more accurate methods to determine reliability targets, the current methods are conservative, relatively simple to implement, and have thus far been considered satisfactory for setting design reliability targets. Much of the ground-work to write proposal files and background documents for records to make the changes needed to achieve our objective have been completed. The Design Task Group has documented much of their work through papers, presentations, and memorandums. Three memorandums in which INL team members had substantial contributions are found in the Appendices: FEA Modeling for the Baseline Program, Evaluating the Effects on Margin of Updating the Threshold and Shape Parameters in the Full Assessment, and Interpretations of the Full and Simplified Assessments in ASME BPVC. Most of the on-going work to achieve the Design Task Group?s objective will be addressing comments on existing records and moving records through the balloting process. The Design Task Group met bi-weekly mostly through the end of FY2023. Since February 2024, the Design Task Group has mostly been completed with solving and documenting the technical issues associated with the assessments. Unless new tasks are identified, the remaining work of the Design Task Group will be political and editorial.
Synthesis of sulfonated porous carbon nanospheres solid acid by a facile chemical activation route
Generally, porous carbon nanospheres materials are usually prepared via a template method, which is a multi-steps and high-cost strategy. Here, we reported a porous carbon nanosphere solid acid with high surface area and superior porosity, as well as uniform nanospheical morphology, which prepared by a facile chemical activation with ZnCl{sub 2} using resorcinol-formaldehyde (RF) resins spheres as precursor. The activation of RF resins spheres by ZnCl{sub 2} at 400 °C brought high surface area and large volume, and simultaneously retained numerous oxygen-containing and hydrogen-containing groups due to the relatively low processing temperature. The presence of these functional groups is favorable for the modification of –SO{sub 3}H groups by a followed sulfonation treating with sulphuric acid and organic sulfonic acid. The results of N{sub 2} adsorption–desorption and electron microscopy clearly showed the preservation of porous structure and nanospherical morphology. Infrared spectra certified the variation of surface functional groups after activation and the successful modification of –SO{sub 3}H groups after sulfonation. The acidities of catalysts were estimated by an indirect titration method and the modified amount of –SO{sub 3}H groups were examined by energy dispersive spectra. The results suggested sulfonated porous carbon nanospheres catalysts possessed high acidities and –SO{sub 3}H densities, which endowed their significantly catalytic activities for biodiesel production. Furthermore, their excellent stability and recycling property were also demonstrated by five consecutive cycles. - Graphical abstract: Sulfonated porous carbon nanospheres with high surface area and superior catalytic performance were prepared by a facile chemical activation route. - Highlights: • Porous carbon spheres solid acid prepared by a facile chemical activation. • It owns high surface area, superior porosity and uniform spherical morphology. • It possesses high acidity and high –SO{sub 3}H density. • It exhibits excellently catalytic performance for esterification of oleic acid.
Tunnel and field effect carrier ballistics
Methods and apparatus for interacting carriers with a structure of matter employ an electrode for emitting said carriers at a distance from a surface of that structure, and cause such carriers to travel along ballistic trajectories inside that structure by providing along the mentioned distance a gap for performance of a process selected from the group of carrier tunneling and field emission and injecting carriers emitted by the mentioned electrode and that process ballistically into the structure through the gap and the mentioned surface. The carriers are collected or analyzed after their travel along ballistic trajectories in the structure of matter. Pertinent information on the inside of the structure is obtained by conducting inside that structure what conventionally would have been considered external ballistics, while performing the carrier-propelling internal ballistics conversely outside that structure.
Comparative Study of Magnetocaloric Effect in La{sub 0.67}Ca{sub 0.20}Sr{sub 0.13}MnO{sub 3} Manganite Prepared by Sol-Gel Method and Spark Plasma Sintering
The La{sub 0.67}Ca{sub 0.20}Sr{sub 0.13}MnO{sub 3} nanoparticles and bulks were prepared by using sol-gel method (SGM) and spark plasma sintering (SPS), respectively. The X-ray diffraction analysis indicates each sample crystal in a single rhombohedral perovskite structure (space group R 3-bar c). The Curie temperature is slightly improved and the phase transition is sharpened after processing with SPS. The enhancement of magnetocaloric effect (MCE) is also observed in the samples prepared by SPS. For a field change of 3 T, the maximum isothermal entropy change is improved by 32 and 117% when different sintering temperatures and sintering pressures are applied. The magnetic phase transition and MCE can be well described by the Landau theory. The present studies suggest that the perovskite bulks prepared by SPS could be useful for the application of magnetic refrigeration.
The Iterative Processing Framework: A New Paradigm for Automatic Event Building
Abstract In a traditional data-processing pipeline, waveforms are acquired, a detector makes the signal detections (i.e., arrival times, slownesses, and azimuths) and passes them to an associator. The associator then links the detections to the fitting-event hypotheses to generate an event bulletin. Most of the time, this traditional pipeline requires substantial human-analyst involvement to improve the quality of the resulting event bulletin. For the year 2017, for instance, International Data Center (IDC) analysts rejected about 40% of the events in the automatic bulletin and manually built 30% of the legitimate events. Here, we introduce an iterative processing framework (IPF) that includes a new data-processing module that incorporates automatic analyst behaviors (auto analyst [AA]) into the event-building pipeline. In the proposed framework, through an iterative process, the AA takes over many of the tasks traditionally performed by human analysts. These tasks can be grouped into two major processes: (1) evaluating small events with a low number of location-defining arrival phases to improve their formation; and (2) scanning for and exploiting unassociated arrivals to form potential events missed by previous association runs. To test the proposed framework, we processed a two-week period (15–28 May 2010) of the signal-detections dataset from the IDC. Comparison with an expert analyst-reviewed bulletin for the same time period suggests that IPF performs better than the traditional pipelines (IDC and baseline pipelines). The majority of the additional events built by the AA are low-magnitude events that were missed by these traditional pipelines. The AA also adds additional signal detections to existing events, which saves analyst time, even if the event locations are not significantly affected.
Effects of thermal cycling on graphie-fiber-reinforced 6061 aluminum
Graphite-reinforced aluminum alloy metal-matrix composites are among materials being considered for structural components in dimensionally stable space structures. This application requires materials with low values of thermal expansions and high specific stiffnesses. They must remain stable during exposures to the space environment for periods extending to 20 years. The effects of thermal cycling on the thermal expansion behavior and mechanical properties of Thornel P100 graphite 6061 aluminum composites, as fabricated and after thermal processing to eliminate thermal strain hysteresis, have been investigated. Two groups of composites were studied: one was fabricated by hot roll bonding and the other by diffusion bonding. Processing significantly reduced strain hysteresis during thermal cycling in both groups and improved the ultimate tensile strength and modulus in the diffusion-bonded composites. Thermal cycling stabilized the as-fabricated composites by reducing the residual fabrication stress and increased the matrix strength by metallurgical aging. Thermal expansion behavior of both groups after processing was insensitive to thermal cycling. Data scatter was too large to determine effects of thermal cycling on the mechanical properties. The primary effects of processing and thermal cycling can be attributed to changes in the metallurgical condition and stress state of the matrix.
A Difluoro‐Monobromo End Group Enables High‐Performance Polymer Acceptor and Efficient All‐Polymer Solar Cells Processable with Green Solvent under Ambient Condition
Abstract In this paper, a difluoro‐monobromo end group is designed and synthesized, which is then used to construct a novel polymer acceptor (named PY2F‐T) yielding high‐performance all‐polymer solar cells with 15.22% efficiency. The fluorination strategy can increase the intramolecular charge transfer and interchain packing of the previous PY‐T based acceptor, and significantly improve photon harvesting and charge mobility of the resulting polymer acceptor. In addition, detailed morphology investigations reveal that the PY2F‐T‐based blend shows smaller domain spacing and higher domain purity, which significantly suppress charge recombination as supported by time‐resolved techniques. These polymer properties enable simultaneously enhanced J SC and FF of the PY2F‐T‐based devices, eventually delivering device efficiencies of over 15%, significantly outperforming that of the devices based on the non‐fluorinated PY‐T polymer (13%). More importantly, the PY2F‐T‐based active layers can be processed under ambient conditions and still achieve a 14.37% efficiency. They can also be processed using non‐halogenated solvent o ‐xylene (no additive) and yield a decent performance of 13.05%. This work demonstrates the success of the fluorination strategy in the design of high‐performance polymer acceptors, which provide guidelines for developing new all‐PSCs with better efficiencies and stabilities for commercial applications.
High Performance Platinum Group Metal Free Membrane Electrode Assemblies through Control of Interfacial Processes
The quantitative goal of this project was to produce a high-performance anion exchange membrane water electrolyzer (AEM-WE) completely free of platinum group metals (PGMs), which could operate for at least 500 hours with less than 50 microV/hour degradation, at 500 mA/cm 2 . To achieve this goal, work focused on the optimization of electrocatalyst conductivity, with dispersion and utilization in the membrane electrode assembly (MEA) improved through refinement of deposition techniques. Critical factors were also explored with significant work undertaken by Northeastern University to further understand catalyst-membrane-ionomer interfaces and how they differ from liquid electrolyte. Water management and optimal cell operational parameters were established through the design, fabrication, and test of a new test station at Proton specific for AEM evaluation. Additionally, AEM material stability and robustness at high potentials and gas evolution conditions were advanced at Penn State.
High solvent-resistant and integrally crosslinked polyimide-based composite membranes for organic solvent nanofiltration
This study reports a new class of integral polyimide (PI)-based thin film composite (TFC) membranes (with improved solvent resistance in both the skin layer and the substrate) for organic solvent nanofiltration (OSN). The OSN membrane was prepared via interfacial polymerization (IP) onto a PI ultrafiltration (UF) substrate, followed by an imidization, a chemical crosslinking, and a solvent activation process. During the IP process, m-phenylenediamine (MPD), dopamine (DA), and 1,2,4,5-benzene tetracarboxylic acyl chloride (BTAC) were respectively used as an aqueous monomer, an aqueous additive, and an organic monomer. We proved that amide bonding formed between MPD and the PI substrate during the immersion of the substrate in the aqueous MPD solution, thus providing a strong binding between the substrate and the subsequently formed skin layer of polyamide acid (PAA), which was formed due to reaction between MPD and BTAC during the IP process. DA contains amine group and could also help build a strong binding between the substrate and the skin layer during the same IP process. The subsequent imidization step converted the PAA molecules of the skin layer into PI polymers, which was quite similar to that of the substrate. The final crosslinking step crosslinked not only the inner molecules of the skin layer, and the inner molecules of the substrate, but also the interface molecules between the skin and substrate so as to form an integral composite membrane with improving solvent resistance. Finally, the fabricated OSN membranes under optimal preparation conditions exhibited an ethanol permeance of 2.03 L m -2 h -1 bar -1 with a rejection of 98% for Rhodamine B (479 Da) and exhibited an outstanding organic solvent resistance without compromising separation performance during the persistent immersion in DMF at 80 °C for two weeks, indicating a promising prospective in OSN applications.
Technical support for creating an artificial intelligence system for feature extraction and experimental design
Techniques for classifying objects into groups or clases go under many different names including, most commonly, cluster analysis. Mathematically, the general problem is to find a best mapping of objects into an index set consisting of class identifiers. When an a priori grouping of objects exists, the process of deriving the classification rules from samples of classified objects is known as discrimination. When such rules are applied to objects of unknown class, the process is denoted classification. The specific problem addressed involves the group classification of a set of objects that are each associated with a series of measurements (ratio, interval, ordinal, or nominal levels of measurement). Each measurement produces one variable in a multidimensional variable space. Cluster analysis techniques are reviewed and methods for incuding geographic location, distance measures, and spatial pattern (distribution) as parameters in clustering are examined. For the case of patterning, measures of spatial autocorrelation are discussed in terms of the kind of data (nominal, ordinal, or interval scaled) to which they may be applied.
Direct band gap group IV semiconductors and methods of preparing the same
A semiconductor film includes a two-dimensional (2D) material layer having a hexagonal in-plane lattice structure, and a substantially planar Group IV semiconductor layer having a direct band gap on the 2D material layer. A method of fabricating a semiconductor material includes growing a Group IV semiconductor material on a two-dimensional material having a hexagonal in-plane lattice structure. This growth process results in the Group IV semiconductor material having a direct band gap. The semiconductor films may be used in any optoelectronic device, including flexible devices.
The 5-(4-Ethynylophenoxy) isophthalic chloride
Sulfone-ester polymers containing pendent ethynyl groups and a direct and multistep process for preparing them are disclosed. The multistep process involves the conversion of a pendent bromo group to the ethynyl group while the direct route involves reating hydroxy-terminated sulfone oligomer or polymers with a stoichiometric amount of 5-(4-ethynylphenoxy) isophthaloyl chloride. The 5-(4-ethynylphenoxy) isophthaloyl chloride and the process for preparing it are also disclosed.
Regioselective, Asymmetric Formal Hydroamination of Unactivated Internal Alkenes
Abstract We report the regioselective and enantioselective formal hydroamination of unsymmetrical internal alkenes catalyzed by a copper catalyst ligated by DTBM‐SEGPHOS. The regioselectivity of the reaction is controlled by the electronic effects of ether, ester, and sulfonamide groups in the homoallylic position. The observed selectivity underscores the influence of inductive effects of remote substituents on the selectivity of catalytic processes occurring at hydrocarbyl groups, and the method provides direct access to various 1,3‐aminoalcohol derivatives with high enantioselectivity.
[LCA UP] Biomass Land Preparation (2023)
This unit process models land preparation activities for various biomass types.
Quantum chemical analysis of mechanisms of phenylacetylene and styrene hydrogenation to ethylbenzene on the Pd{111} surface
The mechanisms of the hydrogenation of phenylacetylene and styrene to ethylbenzene on the Pd{111} surface, which are secondary reactions of the selective hydrogenation of phenylacetylene, were studied by the DFT-PBE method. The position of the Ph group of the styrene molecule with respect to the Pd surface is shown to exert a noticeable effect on the mechanism of the process. If the Ph group is adsorbed on the Pd surface, then the addition of the first H atom to the terminal C atom of the styrene molecule is most probable. If Ph does not contact the surface, then the most substituted C atom of the styrene molecule is first hydrogenated. On the whole, the interaction of the Ph group with the Pd{111} surface results in stable adsorption structures, the hydrogenation of which on the Pd{111} surface is strongly hindered. The Gibbs activation energy (ΔG{sup ≠}{sub 298}) is 22.9 and 27.1 kcal mol{sup –1} in the most probable reaction routes of styrene hydrogenation to ethylbenzene and direct hydrogenation of phenylacetylene to ethylbenzene, respectively.
Proto-neutron star convection and the neutrino-driven wind: implications for the r-process
The neutrino-driven wind from proto-neutron stars is a proposed site for r-process nucleosynthesis, although most previous work has found that a wind heated only by neutrinos cannot produce the third r-process peak. However, several groups have noted that introducing a secondary heating source within the wind can change the hydrodynamic conditions sufficiently for a strong r-process to proceed. One possible secondary heating source is gravito-acoustic waves, generated by convection inside the proto-neutron star. As these waves propagate into the wind, they can both accelerate the wind and shock and deposit energy into the wind. Additionally, the acceleration of the wind by these waves can reduce the total number of neutrino captures and thereby reduce the final electron fraction of the wind. In neutron rich conditions, all of these effects can make conditions more favourable for r-process nucleosynthesis. Here, we present a systematic investigation of the impact of these convection-generated gravito-acoustic waves within the wind on potential nucleosynthesis. We find that wave effects in the wind can generate conditions favourable for a strong r-process, even when the energy flux in the waves is a factor of 10 –4 smaller than the total neutrino energy flux and the wind is marginally neutron rich. Nevertheless, this depends strongly on the radius at which the waves become non-linear and form shocks. We also find that both entropy production after shock formation and the acceleration of the wind due to stresses produced by the waves prior to shock formation impact the structure and nucleosynthesis of these winds.
Future integrated design process
The design process is one of the sources used to produce requirements for a computer system to integrate and manage product design data, program management information, and technical computation and engineering data management activities of the aerospace design process. Design activities were grouped chronologically and explored for activity type, activity interface, data quantity, and data flow. The work was based on analysis of the design process of several typical aerospace products, including both conventional and supersonic airplanes and a hydrofoil design. Activities examined included research, preliminary design, detail design, manufacturing interface, product verification, and product support. The design process was then described in an IPAD environment--the future.