Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Evaluation of Energy Storage Potential of Unconventional Shale Reservoirs Using Numerical Simulation of Cyclic Gas Injection

Compressed air energy storage (CAES) stores energy as compressed air in underground formations, typically salt dome caverns. When electricity demand grows, the compressed air is released through a turbine to produce electricity. CAES in the US is limited to one plant built in 1991, due in part to the inherent risk and uncertainty of developing subsurface storage reservoirs. As an alternative to CAES, we propose using some of the hundreds of thousands of hydraulically fractured horizontal wells to store energy as compressed natural gas in unconventional shale reservoirs. To store energy, produced or “sales” natural gas is injected back into the formation using excess electricity and is later produced through an expander to generate electricity. To evaluate this concept, we performed numerical simulations of cyclic natural gas injection into unconventional shale reservoirs using cmg-gem commercial reservoir modeling software. We tested short-term (diurnal) and long-term (seasonal) energy storage potential by modeling well injection and production gas flowrates as a function of bottom-hole pressure. First, we developed a conceptual model of a single fracture stage in an unconventional shale reservoir to characterize reservoir behavior during cyclic injection and production. Next, we modeled cyclic injection in the Marcellus shale gas play using published data. Results indicate that Marcellus unconventional shale reservoirs could support both short- and long-term energy storage at capacities of 100–1000 kWe per well. The results indicate that energy storage in unconventional shale gas wells may be feasible and warrants further investigation.

25 ENERGY STORAGE↗
DOE OSTI2023

Bacteriochlorin syntheses - Status, problems, and exploration

Bacteriochlorins – Nature’s near-infrared (NIR) chromophores – are distinguished by an intense ([Formula: see text] ∼;10 5 M[Formula: see text]cm[Formula: see text] long-wavelength absorption band in the ∼;700–1000 nm. The development of routes to prepare synthetic, tailorable bacteriochlorins holds promise for multiple disciplines where NIR-light-promoted photoactivity is of interest. A de novo route to bacteriochlorins equipped with a stabilizing gem-dimethyl group in each pyrroline ring was discovered in 2003. Continued development in this arena over 20 years has led to additional routes as well as methods to install substituents at selected positions about the perimeter of the macrocycle. The present paper reports studies that highlight substantial limitations of existing synthetic routes, including stymied access to multi-bacteriochlorin arrays and the inability to install (in a rational way) distinct groups at opposite sides of the macrocycle. The origins of the limitations are traced to particular stages of the chemistry ranging from derivatizing pyrroles, creating pyrrolines, constructing and elaborating dihydrodipyrrins, coupling dihydrodipyrrins, and forming macrocycles. Through exploration of a dozen aspects of bacteriochlorin syntheses, 60 new compounds (and nine known compounds via improved syntheses) have been prepared and characterized; the data include 20 single-crystal X-ray diffraction analyses. The research taken together points to areas of focus to fulfill the promise of this fascinating class of compounds.

Chemistry↗
DOE OSTI2024

Synthesis of (oxo)chlorin dimers chelated with thallium(III)

Two target dimers have been prepared for fundamental studies of hole/electron transfer. Metalation with thallium(III) enables clocking of the rate of hole/electron transfer between the two macrocycles. Each dimer contains a diphenylethyne linker joining two identical hydroporphyrins (chlorin or oxochlorin). The linker is substituted at the 4,4′-positions whereas each (oxo)chlorin is joined at the 10-position. Each (oxo)chlorin is equipped with a gem-dimethyl group at the 18-position to stabilize the hydroporphyrin chromophore toward adventitious dehydrogenation and a 3,5-di-tert-butyl group at the 5-position to achieve increased solubilization in organic media. The dimers parallel a prior set of diphenylethyne-linked (oxo)chlorin constructs containing zinc-free base, zinc-zinc, and copper-copper metalation states that have been examined in studies of electronic communication. The building block (oxo)chlorins for preparing the thallium-containing dimers have been prepared in quantities of 32–404 mg, a scale up to 14-fold larger than previously. Thallation of the free base (oxo)chlorin dimers was achieved with excess TlCl 3 ⋅4H 2 O in CH 2 Cl 2 /CH 3 OH (3–4:1) upon overnight reaction at room temperature. The long-wavelength (Q[Formula: see text] absorption band of (oxo)chlorins lies between that of the zinc(II) and free base counterparts. Absorption spectral comparisons are provided of the thallium(III) and free base (oxo)chlorin monomers and dimers.

Chemistry↗
DOE OSTI2023

FriendlyNets

FriendlyNets provides a method for assessing the promotion/inhibition effect on a microbe of a microbial community using a network of community interactions. At its core, FriendlyNets judges how much a network promotes or inhibits one of its nodes. It does this by assuming a set of dynamical systems represented by the network and using the resulting dynamics. FriendlyNets is also packaged with functions for generating a network from a set of genome-scale metabolic models (commonly called GSMs or GEMs) by simulating pairwise growth.

Brunner, James↗
DOE OSTI2022

pnnl/portfoliomanager-rb

This invention is a Ruby "gem" (library) that provides clients for ENERGY STAR Portfolio Manager (ESPM) Web Services, Inventive features: 100% coverage of version 18.0 of the ESPM API. Automated mapping between ESPM XML schemas and Ruby objects. Clients for both the "live" and "test" ESPM API environments. Debugging mode with HTTP request/response logging.

Borkum, Mark↗
DOE OSTI2026

OpenStudio®-MCP [SWR-26-035]

OpenStudio®-MCP is a Model Context Protocol (MCP) server that lets AI assistants perform building energy modeling through natural language. Rather than requiring users to learn the OpenStudio® SDK, EnergyPlus® scripting, or Ruby/Python automation, the server translates conversational requests into sequences of tool calls that create models, design HVAC systems, run simulations, and extract results — all within a single chat session. The server's 124 tools are organized into a skills architecture where each skill encapsulates a domain of building energy modeling (envelope, HVAC, loads, weather, simulation, results) behind typed, LLM-friendly interfaces. High-leverage operations like applying ASHRAE 90.1 baseline systems or generating standards-compliant typical buildings are exposed as single tool calls that internally wire dozens of OpenStudio® objects. Bundled measures from ComStock™ and Openstudio® -common-measures-gem are wrapped with dedicated tools and typed arguments rather than exposed through a generic measure interface, so AI models get consistent, error-resistant recipes without needing to discover measure arguments at runtime. A key design decision is structured results extraction: six SQL-based tools return surgical ~300–1,000 token responses (end-use breakdowns, envelope summaries, HVAC sizing, timeseries data) instead of requiring the AI to parse ~100K-token raw HTML reports, making iterative design exploration practical within context window limits. The codebase is designed as a reference implementation — explicit, well-commented, and modular — so that other simulation engines (EnergyPlus® standalone, TRNSYS, DOE-2) can use it as a template for building their own MCP servers.

Ball, Brian [National Laboratory of the Rockies (N↗
DOE OSTI2024

Single-nuclei transcriptome analysis of channel catfish spleen provides insight into the immunome of an aquaculture-relevant species

The catfish industry is the largest sector of U.S. aquaculture production. Given its role in food production, the catfish immune response to industry-relevant pathogens has been extensively studied and has provided crucial information on innate and adaptive immune function during disease progression. To further examine the channel catfish immune system, we performed single-cell RNA sequencing on nuclei isolated from whole spleens, a major lymphoid organ in teleost fish. Libraries were prepared using the 10X Genomics Chromium X with the Next GEM Single Cell 3’ reagents and sequenced on an Illumina sequencer. Each demultiplexed sample was aligned to the Coco_2.0 channel catfish reference assembly, filtered, and counted to generate feature-barcode matrices. From whole spleen samples, outputs were analyzed both individually and as an integrated dataset. The three splenic transcriptome libraries generated an average of 278,717,872 reads from a mean 8,157 cells. The integrated data included 19,613 cells, counts for 20,121 genes, with a median 665 genes/cell. Cluster analysis of all cells identified 17 clusters which were classified as erythroid, hematopoietic stem cells, B cells, T cells, myeloid cells, and endothelial cells. Subcluster analysis was carried out on the immune cell populations. Here, distinct subclusters such as immature B cells, mature B cells, plasma cells, γδ T cells, dendritic cells, and macrophages were further identified. Differential gene expression analyses allowed for the identification of the most highly expressed genes for each cluster and subcluster. This dataset is a rich cellular gene expression resource for investigation of the channel catfish and teleost splenic immunome.

Science & Technology - Other Topics↗
DOE OSTI2022

Supplementary Data for "Evaluation of the Economic Implications of Varied Pressure Drawdown Strategies Generated Using a Real-time, Rapid Predictive, Multi-fidelity Model for Unconventional Oil and Gas Wells" by Bello, K., Vikara, D., Sheriff, A., Viswanathan, H., Carr, T., Sweeney, M., O'Malley, D., Marquis, M., Vactor, R.T., and Cunha, L.

The Bello et al. study evaluates the impact of contrasting pressure drawdown on gas productivity and the resulting economics of a well in the Marcellus Shale of the Appalachian Basin. This research applies a techno-economic analysis approach to help identify potential ways pressure management strategies can be used to improve cumulative recovery of hydraulically fractured horizontal wells while maintaining project profitability. Gas production forecast outlook scenarios of the Marcellus Shale Energy and Environment Laboratory Laboratory's MIP-3H well were generated under varying pressure drawdowns using two approaches: 1) a novel physics-informed machine learning (PIML) workflow and 2) via traditional reservoir simulation in Computer Modeling Group’s (CMG) GEM Compositional & Unconventional Simulator. Cash flow and other economic metrics of interest were compiled on the production outlook using the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL) Unconventional Shale Well Economic Model (UShWEM).The sheets within this Microsoft ExcelTM workbook provide the economic metric outputs for the baseline condition and the one-at-a-time (OAT) sensitivity analysis of UShWEM's input parameters for each of the production scenarios evaluated.

Fracture Network Model↗
DOE OSTI2022

Tundra SGS – Critical Importance of Site-Specific Injectivity Testing for Carbon Dioxide Injection Well Simulation Calibration

Paper presented at 16th International Conference on Greenhouse Gas Control Technologies (GHGT-16), October 23–27, 2022, Lyon, France. Brine injectivity tests were conducted on both the Broom Creek (BC) and Deadwood (DW) storage formations in one of the cored stratigraphic test wells prior to finalized simulations. The injectivity tests entailed injection of brine into the formations, followed by shutting in the wells. The shut-in duration represents the fall-off period which was used to carry out pressure transient analyses of the tests. The analysis of injectivity tests indicated that core-indicated and modeled permeability distributions should be conservatively multiplied by 2.5× and 5× in the BC and DW geologic models, respectively, prior to numerical simulations of CO 2 injection using Computer Modelling Group’s (CMG’s) GEM equation-of-state reservoir simulator. The scaler permeability multipliers allowed the fluid flow simulations to fully represent well test-measured injection well rates in the respective formations.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2020

2018 Long-Term Hydrologic Monitoring Program Report for Rio Blanco, Colorado, Site

This report presents the monitoring data collected by the U.S. Department of Energy (DOE) Office of Legacy Management (LM) at the Rio Blanco, Colorado, Site (Figure 1). The Rio Blanco site was the location of an underground nuclear test during which three nuclear devices were detonated nearly simultaneously in a single borehole in 1973. The test resulted in residual radionuclide contamination at the detonation depths of 5840, 6230, and 6690 feet (ft) (DOE 2015). Monitoring includes the collection of samples from groundwater wells and surface water locations near the site to assess for any potential impacts that may be attributed to the Rio Blanco nuclear test. This report summarizes the laboratory analytical results obtained from the sampling event conducted in 2018. This annual report and previous reports are available on the LM public website at https://www.lm.doe.gov/rio_blanco/Sites.aspx. Data collected during this and previous monitoring events are available on the Geospatial Environmental Mapping System (GEMS) website at https://gems.lm.doe.gov/#site=RBL.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Multiphysics Proxy Modeling for CCS [Slides]

In a presentation for the GEM Lab Research Group Meeting, the motivation, goals, methods, and results of the study were described. The study's overall goal is to develop an initial proxy model for the leakage of CO 2 from a deep saline aquifer through a fault.

58 GEOSCIENCES↗
DOE OSTI2021

Development, Implementation, and Verification of Partially-Ionized Collisional Multifluid Plasma Models in Drekar

We consider the development of multifluid models for partially ionized multispecies plasmas. The models are composed of a standard set of five-moment fluid equations for each species plus a description of electromagnetics. The most general model considered utilizes a full set of fluid equations for each charge state of each atomic species, plus a set of fluid equations for electrons. The fluid equations are coupled through source terms describing electromagnetic coupling, ionization, recombination, charge exchange, and elastic scattering collisions in the low-density coronal limit. The form of each of these source terms is described in detail, and references for required rate coefficients are identified for a diverse range of atomic species. Initial efforts have been made to extend these models to incorporate some higher-density collisional effects, including ionization potential depression and three- body recombination. Some reductions of the general multifluid model are considered. First, a reduced multifluid model is derived which averages over all of the charge states (including neutrals) of each atomic species in the general multifluid model. The resulting model maintains full consistency with the general multifluid model from which it is derived by leveraging a quasi-steady-state collisional ionization equilibrium assumption to recover the ionization fractions required to make use of the general collision models. Further reductions are briefly considered to derive certain components of a single-fluid magnetohydrodynamics (MHD) model. In this case, a generalized Ohm's law is obtained, and the standard MHD resistivity is expressed in terms of the collisional models used in the general multifluid model. A number of numerical considerations required to obtain robust implementations of these multifluid models are discussed. First, an algebraic flux correction (AFC) stabilization approach for a continuous Galerkin finite element discretization of the multifluid system is described in which the characteristic speeds used in the stabilization of the fluid systems are synchronized across all species in the model. It is demonstrated that this synchronization is crucial in order to obtain a robust discretization of the multifluid system. Additionally, several different formulations are considered for describing the electromagnetics portion of the multifluid system using nodal continuous Galerkin finite element discretizations. The formulations considered include a parabolic divergence cleaning method and an implicit projection method for the traditional curl formulation of Maxwell's equations, a purely- hyperbolic potential-based formulation of Maxwell's equations, and a mixed hyperbolic-elliptic potential-based formulation of Maxwell's equations. Some advantages and disadvantages of each formulation are explored to compare solution robustness and the ease of use of each formulation. Numerical results are presented to demonstrate the accuracy and robustness of various components of our implementation. Analytic solutions for a spatially homogeneous damped plasma oscillation are derived in order to verify the implementation of the source terms for electromagnetic coupling and elastic collisions between fluid species. Ionization balance as a function of electron temperature is evaluated for several atomic species of interest by comparing to steady-state calculations using various sets of ionization and recombination rate coefficients. Several test problems in one and two spatial dimensions are used to demonstrate the accuracy and robustness of the discretization and stabilization approach for the fluid components of the multifluid system. This includes standard test problems for electrostatic and electromagnetic shock tubes in the two-fluid and ideal shock-MHD limits, a cylindrical diocotron instability, and the GEM challenge magnetic reconnection problem. A one-dimensional simplified prototype of an argon gas puff configuration as deployed on Sandia's Z-machine is used as a demonstration to exercise the full range of capabilities associated with the general multifluid model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Evaluation of Low Cost Infrasound Sensor Packages

Sandia National Laboratories has tested and evaluated the performance of the following five models of low-cost infrasound sensors and sensor packages: Camas microphone, Gem Infrasound Logger, InfraBSU sensor, Raspberry Boom, and the Samsung S10 smartphone utilizing the Redvox app. The purpose of this infrasound sensor evaluation is to measure the performance characteristics in such areas as power consumption, sensitivity, self-noise, dynamic range, response, passband, linearity, sensitivity variation due to changes in static pressure and temperature, and sensitivity to vertical acceleration. The infrasound monitoring community has leveraged such sensors and integrated packages in novel ways; better understanding the performance of these units serves the geophysical monitoring community.

42 ENGINEERING↗
DOE OSTI2021

Exploring Novel Technologies for Particle Tracking in Gas TPCs (Final Technical Report)

This report provides the final results from R&D on a novel 2D readout for a time projection chamber (TPC), which operates with negative-ion drift. The readout consists of two gas electron multiplier (GEM) devices places at an angle with respect to each other. The 2D range of particles interacting in the TPC is reconstructed using pulse-shape timing only. Due to the low diffusion and drift speeds of the negative-ions carrying the track information to the anode, the track resolution is <200 microns. Acquiring this level of resolution for short, low energy particle tracks in a standard TPC would require a fine granularity strip or pixel readout with many 1000s of electronic channels. With this novel readout, only two channels are needed. Our results showed that the concept is fundamentally sound. We found a number of issues related to how well the timing signals are determined from the pulse waveforms. Solutions for these had to be left for future R&D.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Bay Area Regional Energy: Network Integrated Commercial Retrofits (BRICR) Project. Final Report

The BRICR project applied large-scale building energy modeling concepts with the aim of reducing the cost of energy efficiency targeting, design, and project development, and measurement of energy savings for energy efficiency programs implemented by local governments that serve small and medium commercial buildings (SMB). The project leveraged the services and resources of existing local government energy programs serving disadvantaged and hard-to-reach SMB customers. In contrast to programs run by utilities, local government programs generally do not have direct access to energy billing records for an entire class of customers in a geographic area, which prior research demonstrated useful for large-scale building energy model baseline development and calibration. , However, local governments are rich in public records that offer important clues about physical attributes and uses that, along with behavior, determine energy use. Relying only on public records, BRICR demonstrated development of credible baseline energy models for 3,792 office, retail, and hotel buildings. Publicly disclosed annual energy use data from a local energy benchmarking program and anonymized data from the Building Performance Database, the nation’s largest dataset about energy-related characteristics of buildings, were utilized to validate and calibrate energy models via an innovative method comparing distributions of energy intensity by fuel type for portfolios of buildings of similar size, vintage, and use. Portfolio calibration does not provide certainty that an energy model fits an individual building; the method is useful when billing data is not accessible – a common situation for researchers, energy service providers and ESCOs, local governments, and any party other than a utility. A software component was developed, the BRICR gem, which automates simulation when relevant data is added or edited by the user to a file saved in the standardized BuildingSync XML schema for energy audit data. The component was demonstrated as a simplified means to generate a mass of energy models corresponding to public records containing basic attributes such as building scale, location, use, year built, and aspect ratio in combination with building energy code prototype data corresponding to use and vintage. The component was also demonstrated as a simplified means to automate energy simulation when attributes are revised; the intention was to enable iterative improvement of the baseline model and energy savings estimates for common energy conservation measures as users revise relevant attributes based on their observations. In the context of institutional change and uncertainty for the participating local government energy programs, 13 whole building retrofits were completed. Impacts were measured by applying the CalTRACK2.0 methods to standardize measurement of normalized metered energy consumption. The GRIDMeter methods of stratified sampling and individual load shape analysis were applied to adjust for impacts of the effect of COVID-19 on retrofitted buildings in the context of all local buildings of similar size and use. Excluding impacts of the pandemic, retrofitted buildings demonstrated between 1.6% and 25.1% reduction in energy use. The project contributed use cases and feedback that helped inform evolution of the software tools and data formats that were combined for the first time in the BRICR project.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Benchmark Specification for FFTF LOFWOS Test #13

The Fast Flux Test Facility (FFTF) at the Hanford site in Washington was designed by the Westinghouse Electric Corporation for the U.S. Department of Energy. FFTF was a 400 MW thermal, oxide-fueled, liquid sodium cooled test reactor, built to assist development and testing of advanced fuels and materials for fast breeder reactors. After reaching criticality in 1980, FFTF operated until 1992, providing the U.S. Department of Energy (DOE) with the means to test fuels, materials, and other components in a fast neutron flux environment. In July 1986, a series of unprotected transients (with the plant protection system intentionally disabled) were performed in FFTF as part of the passive safety demonstration program. Among these were thirteen loss of flow without scram (LOFWOS) tests. The goals of this program included confirming the liquid metal reactor safety margins, providing data for computer code validation, and demonstrating the inherent and passive safety benefits of specific design features. The test defined in this benchmark is LOFWOS Test #13, which was initiated at 50% power and 100% flow with the pump pony motors turned off. This benchmark specification is intended to support collaborative efforts within international partnerships on the validation of simulation tools and models in the area of Sodium-cooled Fast Reactor (SFR) safety. Validated tools and models are needed to evaluate SFR inherent safety characteristics and assess the impact of passive design features in response to accident initiators. Comparisons with experimental data and the results of safety analyses from other groups create unique opportunities to improve predictive capabilities of computational codes and methods for SFR modeling and simulation. The conditions of the LOFWOS test along with the feedback from FFTF’s limited free bow core restraint system and the novel passive reactivity control Gas-Expansion Modules (GEMs) pose a very challenging and uniquely valuable benchmark exercise.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Decoding Zeolite Crystallization and Stage III in Nuclear Waste Glasses by Coupled Modeling and Experiments

Under specific conditions of pH and temperature, nuclear waste immobilization borosilicate glasses may exhibit a sudden acceleration in their corrosion kinetics (stage III)—a behavior that has been associated with the formation of zeolite crystals. Such accelerated dissolution may compromise the integrity of nuclear wasteforms placed in geological depositories. However, thus far, none of the available models is able to predict the thermodynamic propensity and kinetics of zeolite precipitation as a function of the solution conditions due to (i) a lack of fundamental knowledge regarding the nucleation & growth mechanisms of zeolitic phases, (ii) uncertainty regarding the compositions (types) of zeolites that may form and the rate-limiting step in their precipitation as a function of the solution conditions, and (iii) the complexities that arise due to the vast parametric space (i.e., solution chemistry, temperature, number of secondary phases, etc.) that encompass these systems under conditions of environmental exposure. To resolve these challenges, this project aimed to unambiguously identify the thermodynamic propensity for zeolite precipitation and the kinetics thereof as a function of the solution conditions (composition, pH, and temperature). To achieve this goal: 1) We identified the solution conditions and zeolite phases relevant to nuclear glass dissolution. 2) We performed a series of ab initio molecular dynamics (AIMD) simulations to compute the thermodynamic properties of a group of characteristic zeolites that features a large range of compositions, various hydration levels, a wide range of framework structures, and partial atomic site occupancies. 3) We released a first-of-a-kind self-consistent thermodynamic database that can be used to assess the kinetics and the stability fields of zeolitic phases within a Gibbs energy minimization (GEM) framework. 4) We developed a robust geochemical modeling method allowing us to predict the stability of secondary phases (including zeolites, calcium–silicate–hydrate gels, and clays) upon the dissolution of nuclear waste immobilization glasses. 5) We introduced a model that predicts the dissolution kinetics of a series of borosilicate nuclear waste immobilization glasses in terms of the topology of their atomic network. 6) We investigated the roles of the solution composition on the crystallization kinetics of phillipsite zeolites and tobermorite silicate hydrates. Via PNNL’s collaboration and engagement, this project directly supports DOE’s nuclear waste immobilization activities by offering a technical, science-based foundation that will (i) facilitate predictions of the long-term corrosion rates and extents of existing nuclear waste immobilization glasses to help ensure safe and successful vitrification operations, (ii) inform the development of advanced glass formulations with enhanced durability, and, (iii) enable cost-savings that result from making more decisive and hence less conservative predictions while offering higher levels of nuclear waste embedment in smaller, more compact glass volumes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

2022 Long-Term Hydrologic Monitoring Program Report for the Rio Blanco, Colorado Site

This report presents the monitoring data collected by the U.S. Department of Energy (DOE) Office of Legacy Management (LM) during the 2022 sampling event at the Rio Blanco, Colorado, Site, where an underground nuclear test was conducted in 1973. The test resulted in residual radionuclide contamination at the detonation depth. The 2022 sampling event included the collection of samples from onsite groundwater wells to monitor for any potential contamination that might be attributed to the Rio Blanco nuclear tests. This report summarizes the laboratory results obtained from the sampling along with the historical results since monitoring began in the 1970s. This annual report and previous reports are available on the LM public website at https://www.energy.gov/lm/rio-blanco-colorado-site. Data collected during this and previous monitoring events are available on the Geospatial Environmental Mapping System (GEMS) website at https://gems.lm.doe.gov/#site=RBL.

54 ENVIRONMENTAL SCIENCES↗