Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GASIFICATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Catalytic combustor for integrated gasification combined cycle power plant

A gasification power plant 10 includes a compressor 32 producing a compressed air flow 36, an air separation unit 22 producing a nitrogen flow 44, a gasifier 14 producing a primary fuel flow 28 and a secondary fuel source 60 providing a secondary fuel flow 62 The plant also includes a catalytic combustor 12 combining the nitrogen flow and a combustor portion 38 of the compressed air flow to form a diluted air flow 39 and combining at least one of the primary fuel flow and secondary fuel flow and a mixer portion 78 of the diluted air flow to produce a combustible mixture 80. A catalytic element 64 of the combustor 12 separately receives the combustible mixture and a backside cooling portion 84 of the diluted air flow and allows the mixture and the heated flow to produce a hot combustion gas 46 provided to a turbine 48. When fueled with the secondary fuel flow, nitrogen is not combined with the combustor portion.

20 FOSSIL-FUELED POWER PLANTS↗

Underground coal gasification problems

In the 4th UCG International conference which was held in February 2009 more than 20 reports on various UCG problems were presented. Australia, Canada, the United States, the Republic of South Africa, India, China and others are among the countries that actively participate in testing of the capabilities of UCG, evaluating of the resource base, and projecting of pilot enterprises. Three presentations were devoted to UCG projects in Australia. The professional report of B. Favis devoted to current proposals concerning the design of underground gas generators deserved a special attention. Presentations concerning a combination of UCG with the simultaneous underground sequestration of CO{sub 2}. The evaluation of CO{sub 2} emissions at the UCG is specially considered in this paper.

01 COAL, LIGNITE, AND PEAT↗

Online LIBS–ML Framework for Dynamic Characterization of Heterogeneous Waste-Derived Gasification Feedstocks

LIBS−ML framework for real time feedstock characterization during continuous conveyor transport Heterogeneous waste derived feedstocks (e.g., waste coal, biomass and blends) introduce rapid variability in heating value and ash chemistry that affect gasifier operation, yet conventional laboratory characterization techniques are too slow to support proactive control. To address this gap, this study reports on an online, in situ, dynamic characterization framework that couple’s laser-induced breakdown spectroscopy (LIBS) with leakage safe machine learning (ML) regression to deliver real time, decision quality predictions of gasifier relevant properties. A controlled sample matrix spanning two different waste coals, two different biomasses, and engineered blends under two particle size conditions were constructed and benchmarked using standardized laboratory analyses for proximate/ultimate properties and ash composition. LIBS spectra were acquired dynamically as material flowed on a conveyor belt, using high energy 1064 nm laser ablation and shot averaging to improve repeatability and precision. Supervised regression models (multi layer perceptron (MLP) /artificial neural network (ANN), random forest (RF), and support vector regression (SVR)) and an optimized weighted ensemble were trained on emission line feature sets using nested cross validation with Bayesian hyperparameter tuning and validated against an independent hold out set. The proposed LIBS−ML workflow achieves near laboratory predictive fidelity across parametric targets (including higher heating value (HHV), ash content, fixed carbon, sulfur, major ash forming oxides, and initial deformation temperature (IDT)), with the weighted ensemble providing a robust default predictor under dynamic measurement conditions. These results demonstrate a practical pathway for real time feedstock characterization that can enable feedforward adjustments and more resilient gasifier operation for variable quality waste derived fuels.

Biomass↗

Sulfur behavior in the Sasol-Lurgi fixed-bed dry-bottom gasification process

This article reports on the findings of a study regarding the sulfur behavior across a Sasol-Lurgi gasifier. This was undertaken to understand the behavior of the various sulfur-bearing components in the coal, as they are exposed to the conditions in the gasifier. In this study, conventional characterization techniques were employed to monitor the behavior of sulfur-bearing mineral matter across the gasifier. It was observed from the study that the sulfur-bearing mineral (pyrite) in the coal structure undergoes various changes with pyrite being transformed to pyrrhotite and then to various oxides of iron with the subsequent loss of sulfur to form H{sub 2}S. A low proportion of the sulfur species including the organically associated sulfur was encapsulated by a melt that was formed by the interaction between kaolinite and fluxing minerals (pyrite, calcite, and dolomite/ankerite) present in the coal at elevated temperatures and pressure, thereby ending up in the ash. The remaining small proportions of sulfur-bearing mineral matter including pyrite and organically bound sulfur in the unburned carbon in the carbonaceous shales also report to the ash. 18 refs., 8 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Biomass gasification for liquid fuel production

In our old fix-bed autothermal gasifier we tested wood chips and wood pellets. We make experiments for Czech company producing agro pellets - pellets made from agricultural waste and fastrenewable natural resources. We tested pellets from wheat and rice straw and hay. These materials can be very perspective, because they dońt compete with food production, they were formed in sufficient quantity and in the place of their treatment. New installation is composed of allothermal biomass fixed bed gasifier with conditioning and using produced syngas for Fischer - Tropsch synthesis. As a gasifying agent will be used steam. Gas purification will have two parts - separation of dust particles using a hot filter and dolomite reactor for decomposition of tars. In next steps, gas will be cooled, compressed and removed of sulphur and chlorine compounds and carbon dioxide. This syngas will be used for liquid fuel synthesis.

09 BIOMASS FUELS↗

ADVANCED GASIFICATION MERCURY/TRACE METAL CONTROL WITH MONOLITH TRAPS

Two Corning monoliths and a non-carbon-based material have been identified as potential additives for mercury capture in syngas at temperatures above 400°F and pressure of 600 psig. A new Corning monolith formulation, GR-F1-2189, described as an active sample appeared to be the best monolith tested to date. The Corning SR Liquid monolith concept continues to be a strong candidate for mercury capture. Both monolith types allowed mercury reduction to below 5-μg/m3 (~5 ppb), a current U.S. Department of Energy (DOE) goal for trace metal control. Preparation methods for formulating the SR Liquid monolith impacted the ability of the monolith to capture mercury. The Energy & Environmental Research Center (EERC)-prepared Noncarbon Sorbents 1 and 2 appeared to offer potential for sustained and significant reduction of mercury concentration in the simulated fuel gas. The Noncarbon Sorbent 1 allowed sustained mercury reduction to below 5-μg/m3 (~5 ppb). The non-carbon-based sorbent appeared to offer the potential for regeneration, that is, desorption of mercury by temperature swing (using nitrogen and steam at temperatures above where adsorption takes place). A Corning cordierite monolith treated with a Group IB metal offered limited potential as a mercury sorbent. However, a Corning carbon-based monolith containing prereduced metallic species similar to those found on the noncarbon sorbents did not exhibit significant or sustained mercury reduction. EERC sorbents prepared with Group IB and IIB selenide appeared to have some promise for mercury capture. Unfortunately, these sorbents also released Se, as was evidenced by the measurement of H2Se in the effluent gas. All sorbents tested with arsine or hydrogen selenide, including Corning monoliths and the Group IB and IIB metal-based materials, showed an ability to capture arsine or hydrogen selenide at 400°F and 600 psig. Based on current testing, the noncarbon metal-based sorbents appear to be the most effective arsine and hydrogen selenide sorbents. The noncarbon sorbent was able to reduce the concentration to 0 ppb from a starting concentration of 120 ppb. This compares to the target value of 5 ppb (~17μg/m3). The EERC-prepared metal-based pellet and coprecipitate sorbents exhibited arsine reductions of 90% or greater, being below 10 ppb. Corning SR Liquid monoliths exhibited brief periods (<1 hour) of attaining 90% arsine reduction but were able to achieve greater than 80% reduction for several hours. With respect to hydrogen selenide, all Group IB and IIB metal-based sorbents tested exhibited 100% reduction from an inlet concentration of approximately 400 ppb. Corning SR Liquid monoliths exhibited an 82% reduction when two monoliths were tested simultaneously in series.

36 MATERIALS SCIENCE↗

Novel Sorption Enhanced Reaction Process for Simultaneous Production of CO 2 and H 2 from Synthesis Gas Produced by Coal Gasification

The goal of this project is to evaluate the extensive feasibility of a novel concept called Thermal Swing Sorption Enhanced Reaction (TSSER) process to simultaneously produce H 2 and CO 2 as a single unit operation in a sorber-reactor. The successful demonstration of the potential feasibility of the TSSER concept implies that it is worth pursuing further development of the idea. This can be done by more extensive evaluation of the basic sorptive properties of the CO 2 chemisorbents at realistic high pressures and by continuing the experimental and theoretical study of the TSSER process. This will allow us to substantiate the assumptions made during the preliminary design and evaluation of the process and firm up the initial conclusions. The task performed under this project consists of (i) retrofitting an existing single column sorption apparatus for measurement of high pressure CO 2 sorption characteristics, (ii) measurement of high pressure CO 2 chemisorption equilibria, kinetics and sorption-desorption column dynamic characteristics under the conditions of thermal swing operation of the TSSER process, (iii) experimental evaluation of the individual steps of the TSSER process (iv) development of extended mathematical model for simulating cyclic continuous operation of TSSER to aid in process scale-up and for guiding future work, (v) simulate and test SER concept using realistic syngas composition, (vi) extensive demonstration of the thermal stability of sorbents using a TGA apparatus, (vii) investigation of the surfaces of the adsorbents and adsorbed CO 2 ,and (viii) test the effects of sulfur compounds found in syngas on the CO 2 sorbents.

01 COAL, LIGNITE, AND PEAT↗

Final Technical Report: Plasma Arc Gasification Based Rare Earth Element Recovery from Coal Fly Ash

Southern Research, as the primary awardee, with sub-awardees ArcSec Technologies, LLC (ArcSec) and Reaction Engineering International (REI) have investigated a plasma arc based thermal process intended to concentrate rare earth elements (REE) from coal fly ash. Successful demonstration of the technology would contribute to the effort for realizing a competitive, domestic REE value chain thereby reducing U.S. dependence on foreign supply, maintaining national security interests, and creating opportunities for economic growth. The originally proposed concept included two technology options – 1) a smelting process and 2) a smelting plus vaporization and condensation process. For both options, coal fly ash would be smelted in a plasma arc heated furnace under reducing conditions to separate ash into molten slag and reduced metal (primarily iron) phases. During smelting, it was expected that the REE would also be reduced to metals and partition mostly to the iron phase. During the first year of work, sample coal ash feedstocks were acquired and characterized, feasibility of the smelting process was evaluated in bench-scale experiments, and the vaporization/condensation process was investigated through equilibrium and CFD modeling studies. From the feedstock characterization, REE content for the coal ash samples obtained was measured to be in the range of 302 – 1219 ppm with average at 537 ppm. Though it was successfully demonstrated that ash could be separated into slag and metal phases, the bench-scale experiments were only marginally successful at collecting REE in the metal phase. Producing REE concentrates near the DOE goal of 2%, however, has not been achieved. From the modeling studies, the vaporization/condensation process was predicted to be effective for separating individual REE and producing enriched metal fractions with total REE content higher than 2%, provided the smelting process performed as intended. Supplemental smelting experiments and thermodynamic modeling studies, conducted during the second year of work, indicated a number of technical modifications that could lead to producing higher REE concentrates from coal ash. The strategy shifted to reducing as much of the ash oxides to metals as possible, leaving the REE more concentrated in the remaining slag. Results from later experiments based on the modified approach showed improvements in REE recovery and concentration levels in smelted products. SEM-EDS analyses on product specimens showed agglomerations of reduced metal REE crystals at much larger length-scales as compared to REE content in raw ash.

01 COAL, LIGNITE, AND PEAT↗

Low-cost Oxygen (LCO) for Small-scale Modular Gasification Systems

Development of a sorbent-based vacuum pressure swing adsorption oxygen production technology was undertaken. Newly developed perovskite ceramic sorbent materials have a higher O 2 adsorption capacity, lower operating temperatures (550-600 °C vs 800-850 °C), and an order of magnitude faster desorption rate than those used in earlier development efforts. These performance advancements lead to substantial savings in capital investment and operational costs. Cost of producing oxygen using the new sorbents can be considerably lower than a cryogenic air separation unit. Development of these new sorbents and design and fabrication of a pilot demonstration unit (PDU) encompassed lab-scale work, bench-scale testing and development, demonstration-scale sorbent manufacturing, procurement of plant components, and final assembly and testing of the PDU. The goal of the project was to develop an advanced oxygen production technology based on improved perovskite ceramic sorbents that results in significantly lower oxygen cost compared to commercial state of the art technologies. The pilot demonstration unit was constructed and operated, but the performance of the scaled-up sorbent and the PDU was hindered by the mechanical problems with the system. When the problems are accounted for, the results show that the PDU would be able to produce 95% oxygen at a rate exceeding one ton per day. The same mechanical problems also mean that the PDU system was not fully optimized, which would increase the productivity as well.

01 COAL, LIGNITE, AND PEAT↗