SEARCH · Engineering Papers

Results for “Fossil Fuels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Quantifying adherence of oxide scales on steels exposed to high temperature and pressure steam

Oxide scale exfoliation is a major concern in fossil fuel power generation because it can cause tube blockages and erode valves and steam turbine components downstream. There is still considerable scientific and commercial interest to improve the mechanistic understanding of oxide failures by developing models to predict exfoliation and the extent of tube blockage as a function of operating conditions and component geometries. Tensile testing inside a scanning electron microscope was conducted on ferritic–martensitic and austenitic steel specimens with the steam side (Fe,Cr)-rich oxides grown after exposures for up to 1000 h in steam with ~100 ppb O 2 at 276 bar and 550°C. Multiple oxide layer cracks and delamination events were observed and analyzed in detail during the tests. Results from the testing agreed well with earlier observations that had identified the failure location at the outer–inner oxide layer for all tested materials. Calculated adhesion energies identified the outer–inner oxide interface of alloy 347HFG as the weakest interface.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Polyolefin Innovations Toward Circularity and Sustainable Alternatives

The unprecedented growth and socioeconomic impacts of polyolefins clearly outline a major success story in the world of polymer science. Polyolefins revolutionizes industries such as health care, construction, and food packaging. Despite the benefits of polyolefins, there is a rising concern for the environment due to high production volume (i.e., fossil fuel consumption), often short usage time, and problems related to waste management and accumulation in the natural environment. Creating a circular economy for polyolefins through effective recycling technologies has the potential to decrease the environmental impact of these materials. This perspective discusses polyolefins and their impact, existing and emerging recycling/upcycling solutions, and recycle-by-design alternatives that are challenging the status quo.

circular economy↗

DOE OSTI2024

Updated sustainability status of cadmium telluride thin‐film photovoltaic systems and projections

This paper provides a comprehensive assessment of the up-to-date life-cycle sustainability status of cadmium-telluride based photovoltaic (PV) systems. Current production modules (Series 6 and Series 7) are analyzed in terms of their energy performance and environmental footprint and compared with the older series 4 module production and current single-crystalline Silicon (sc-Si) module production. For fixed-tilt systems with Series 6 modules operating under average US irradiation of 1800 kWh/m 2 /year, the global warming potential (GWP) is reduced from 16 g CO 2eq /kWh in Series 4 systems to 10 CO 2 eq /kWh in Series 6 systems. For operation in US-SW irradiation of 2300 kWh/m 2 /year, the GWP is reduced from 11 to 8 CO 2eq /kWh and for 1-axis tracking systems operating in Phoenix, Arizona, with point-of array irradiation of 3051 kWh/m 2 /year the GWP is reduced to 6.5 CO 2eq /kWh. Similar reductions have happened in all environmental indicators. Energy payback times (EPBT) of currently installed systems range from 0.6 years for fixed–tilt ground–mounted installations at average US irradiation at latitude tilt installations to 0.3 years for one-axis trackers at high US-SW irradiation, considering average fossil-fuel dominated electricity grids with fuel to electricity conversion efficiency of 0.3. The resulting energy return on energy investment (EROI) also depends on the conversion efficiency of the electricity grid and on the operation life expectance. For a 30-year operational life and grid conversion efficiency of 0.3, EROI ranges from 50 (at US average irradiation) to 70 for US-SW irradiation. The EROI declines with increased grid conversion efficiency; for CdTe PV operating in south California with grid conversion efficiency of 49%, the EROI is about 50 and is projected to fall to 30 when the state's 2030 target of 80% renewable energy penetration materializes. Material alternatives that show a potential of further reductions in degradation rates and materials for enhanced encapsulation that would enable longer operation lives have also been investigated. A degradation rate of 0.3%/year, which has been verified by accelerated testing, is assumed in 30-year scenarios; this is projected to be reduced to 0.2%/year in the near-term and potentially to 0.1%/year in the longer term. With such low degradation rates and enhanced edge-sealing, modules can last 40- to 50-years. Consequently, all impact indicators will be proportionally reduced while EROI will increase. This detailed LCA was conducted according to ISO standards and IEA PVPS Task 12 guidelines. Furthermore, the study revealed that the choices of system models, methods and temporal system boundaries can significantly impact the results and points out to the need to include assumptions regarding these choices in the “transparency in reporting” requirements listed in the IEA PVPS Task 12 Guidelines.

14 SOLAR ENERGY↗

DOE OSTI2020

Recent advances in polymeric facilitated transport membranes for carbon dioxide separation and hydrogen purification

Membrane and membrane process have been widely considered as one of the best candidates for mitigating CO 2 emissions from the combustion or utilization of fossil fuels. Various amine-containing polymers constitute an important class of membranes, where the highly selective CO 2 transport is achieved by the facilitated transport mechanism. In this review, the amine–CO 2 chemistry is discussed in conjunction with the mechanism of the reaction-mediated CO 2 transport. A wide variety of amine-containing polymers are discussed based on two synthesis motifs: (a) polyamines with amino groups covalently bound to the polymer backbone and (b) small molecule amines embedded in a polymer matrix. This review concludes with the remarks on the facilitated transport membranes for post-combustion carbon capture (CO 2 /N 2 ) and hydrogen purification (CO 2 /H 2 ).

42 ENGINEERING↗

DOE OSTI2020

ToF-SIMS Analysis of Chemical Composition of Atmospheric Aerosols in Beijing

Atmospheric aerosols collected from each season in urban Beijing have been studied using time-of-flight secondary ion mass spectrometry (ToF-SIMS). The chemical composition of atmospheric aerosol particles during various atmospheric pollution levels were analyzed and distinguished by principal component analysis (PCA). The differences and sources of the components of the aerosol particles were explored. The results showed that the fine particulate matter from heavily polluted days mainly consists of inorganic salts and organic compounds, such as hydrocarbons, nitrogen- or sulfur-containing hydrocarbons, and their oxides. Samples collected from clean days in the four seasons were also analyzed. Only the samples collected in spring showed a significant difference from the other three seasons. We concluded that the main source of pollution in the Beijing urban area was fossil fuel combustion from motor vehicles.

ToF-SIMS, principal component analysis↗

DOE OSTI2024

Cu Based Dilute Alloys for Tuning the C 2+ Selectivity of Electrochemical CO 2 Reduction

Electrochemical CO 2 reduction is a promising technology for replacing fossil fuel feedstocks in the chemical industry but further improvements in catalyst selectivity need to be made. So far, only copper-based catalysts have shown efficient conversion of CO 2 into the desired multi-carbon (C 2+ ) products. This work explores Cu-based dilute alloys to systematically tune the energy landscape of CO 2 electrolysis toward C 2+ products. Selection of the dilute alloy components is guided by grand canonical density functional theory simulations using the calculated binding energies of the reaction intermediates CO*, CHO*, and OCCO* dimer as descriptors for the selectivity toward C 2+ products. Here, a physical vapor deposition catalyst testing platform is employed to isolate the effect of alloy composition on the C 2+ /C 1 product branching ratio without interference from catalyst morphology or catalyst integration. Six dilute alloy catalysts are prepared and tested with respect to their C 2+ /C 1 product ratio using different electrolyzer environments including selected tests in a 100-cm 2 electrolyzer. Consistent with theory, CuAl, CuB, CuGa and especially CuSc show increased selectivity toward C 2+ products by making CO dimerization energetically more favorable on the dominant Cu facets, demonstrating the power of using the dilute alloy approach to tune the selectivity of CO 2 electrolysis.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Sustainable Production of Biomass‐Derived Graphite and Graphene Conductive Inks from Biochar

Abstract Graphite is a commonly used raw material across many industries and the demand for high‐quality graphite has been increasing in recent years, especially as a primary component for lithium‐ion batteries. However, graphite production is currently limited by production shortages, uneven geographical distribution, and significant environmental impacts incurred from conventional processing. Here, an efficient method of synthesizing biomass‐derived graphite from biochar is presented as a sustainable alternative to natural and synthetic graphite. The resulting bio‐graphite equals or exceeds quantitative quality metrics of spheroidized natural graphite, achieving a RamanI D /I G ratio of 0.051 and crystallite size parallel to the graphene layers (L a ) of 2.08 µm. This bio‐graphite is directly applied as a raw input to liquid‐phase exfoliation of graphene for the scalable production of conductive inks. The spin‐coated films from the bio‐graphene ink exhibit the highest conductivity among all biomass‐derived graphene or carbon materials, reaching 3.58 ± 0.16 × 10 4 S m −1 . Life cycle assessment demonstrates that this bio‐graphite requires less fossil fuel and produces reduced greenhouse gas emissions compared to incumbent methods for natural, synthesized, and other bio‐derived graphitic materials. This work thus offers a sustainable, locally adaptable solution for producing state‐of‐the‐art graphite that is suitable for bio‐graphene and other high‐value products.

Chemistry↗

DOE OSTI2022

Codesigning Alloy Compositions of CdSe y Te 1− y Absorbers and Mg x Zn 1− x O Contacts to Increase Solar Cell Efficiency

Thin‐film solar cells such as CdTe are a major commercial photovoltaic technology, with more than 25 GW installed worldwide and levelized costs of electricity competitive with fossil fuels. Further progress may result from integrating CdSe y Te 1− y absorbers with Mg x Zn 1− x O contacts, but the device efficiency is difficult to maximize due to coupled dependence on chemical composition of both alloys. Herein, a high‐throughput approach is demonstrated to codesign chemical compositions in alloyed Mg x Zn 1− x O/CdSe y Te 1− y thin‐film solar cells, using combinatorial libraries of PV devices with orthogonal composition gradients in CdSe y Te 1− y absorbers and Mg x Zn 1− x O contacts. It is found that the solar cell performance is a strong and coupled function of both elemental compositions, with efficiency up to 17.7% ( V OC = 836 mV, fill factor = 69%, J SC = 30.6 mA cm −2 ) at atomic compositions of Mg/(Mg + Zn) ≈18% and average Se/(Se + Te) ≈4%. These performance trends among >100 devices are explained by >100 ns lifetime of photoexcited charge carriers at the Mg x Zn 1− x O/CdSe y Te 1− y interface where strong Se accumulation is also observed. This study reports the optimal compositions of the commercially relevant Mg x Zn 1− x O/CdSe y Te 1− y solar cells and demonstrates a general approach to codesigning performance of alloyed thin‐film solar cells and other optoelectronic devices.

14 SOLAR ENERGY↗

DOE OSTI2022

Estimating the impacts of natural gas power generation growth on solar electricity development: PJM's evolving resource mix and ramping capability

Abstract Expansion of distributed solar photovoltaic (PV) and natural gas‐fired generation capacity in the United States has put a renewed spotlight on methods and tools for power system planning and grid modernization. This article investigates the impact of increasing natural gas‐fired electricity generation assets on installed distributed solar PV systems in the Pennsylvania–New Jersey–Maryland (PJM) Interconnection in the United States over the period 2008–2018. We developed an empirical dynamic panel data model using the system‐generalized method of moments (system‐GMM) estimation approach. The model accounts for the impact of past and current technical, market and policy changes over time, forecasting errors, and business cycles by controlling for PJM jurisdictions‐level effects and year fixed effects. Using an instrumental variable to control for endogeneity, we concluded that natural gas does not crowd out renewables like solar PV in the PJM capacity market; however, we also found considerable heterogeneity. Such heterogeneity was displayed in the relationship between solar PV systems and electricity prices. More interestingly, we found no evidence suggesting any relationship between distributed solar PV development and nuclear, coal, hydro, or electricity consumption. In addition, considering policy effects of state renewable portfolio standards, net energy metering, differences in the PJM market structure, and other demand and cost‐related factors proved important in assessing their impacts on solar PV generation capacity, including energy storage as a non‐wire alternative policy technique. This article is categorized under: Photovoltaics > Economics and Policy Fossil Fuels > Climate and Environment Energy Systems Economics > Economics and Policy

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2023

Energy Transition: Challenges and Opportunities for the Oil & Gas Industry

The energy sector has been experiencing a massive but gradual shift in recent years toward renewable and low-carbon energy sources. The future of fossil fuels lies in the ability of the industry to adapt to the market, environment, and social trends within the energy transition framework. In this chapter, we review the challenges that the oil and gas industry will be facing in the coming years. We then explore opportunities and growth areas that this transition provides to the industry. This chapter focuses on three areas of digitization and modernization, developing innovative low-carbon fuels, and harnessing underground and offshore facilities and expertise.

blockchain technology↗

DOE OSTI2023

Modeling Farmers’ Adoption Potential to New Bioenergy Crops: An Agent-Based Approach

The use of fossil fuels is the primary source of greenhouse gas emissions but there are alternatives to these especially in the form of biofuels, fuels derived from bioenergy crops. This paper aims to determine farmers’ potential adoption rates of newly introduced bioenergy crops with a specific example of carinata in the state of Georgia. The determination is done using an agent-based modeling technique with two principal assumptions—farmers are profit maximizer and they are influenced by neighboring farmers. Two diffusion parameters (traditional and expansion) are followed along with two willingness (high and low) scenarios to switch at varying production economics to carinata and other prominent traditional field crops (cotton, peanuts, corn) in the study region. We find that a contract prices around $9, $8 and $7 can be a viable option for encouraging farmers to adopt carinata in low, average, and high profit conditions, respectively. Expansion diffusion (that diffuses all over the geographical area), rather than centered to the few places like traditional diffusion at the early stage of adoption in conjunction with higher willingness conditions influences higher adoption rates in the short-term. As such, the model can be used to understand the behavioral economics of carinata in Georgia and beyond, as well as offering a potential tool to study similar bioenergy crops.

Ullah, Kazi↗

DOE OSTI2025

Climate models project increasing precipitation in the US Southwest in 2024–2100

We analyzed the measured precipitation in the southwestern US and found that, from 1900 to 2024, precipitation decreased at an average rate of − 1.2 cm per year per 100 years. The most significant precipitation decreases occurred in the three-month period from February to April. At the same time, precipitation during the southwestern monsoon season (July, August, and September) remained relatively stable. The ensemble mean of all CMIP6 (Coupled Model Intercomparison Project phase 6) climate models, along with the regression model incorporating anthropogenic aerosol (AER) and Pacific Decadal Oscillation (PDO) as predictors, projects precipitation to increase from 2024 to 2100. This projected precipitation increase relies on the anticipated decrease in emissions of anthropogenic aerosols, which is associated with the transition from fossil fuel burning to renewable and nuclear energy sources.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Integrated energy-water-land nexus planning in the Colorado River Basin (Argentina)

Integrated energy-water-land (EWL) planning promotes synergies and avoids conflicts in ways that sector-specific planning approaches cannot. Many important decisions that influence emerging EWL nexus issues are implemented at regional (e.g., large river basin, electricity grid) and sub-regional (e.g., small river basin, irrigation district) scales. However, actual implementation of integrated planning at these scales has been limited. Simply collecting and visualizing data and interconnections across multiple sectors and sub-regions in a single modeling platform is a unique endeavor in many regions. This study introduces and applies a novel approach to linking together multiple sub-regions in a single platform to characterize and visualize EWL resource use, EWL system linkages within and among sub-regions, and the EWL nexus implications of future policies and investments. This integrated planning methodology is applied in the water-stressed Colorado River Basin in Argentina, which is facing increasing demands for agricultural and fossil fuel commodities. Guided by stakeholders, this study seeks to inform basin planning activities by characterizing and visualizing (1) the basin’s current state of EWL resources, (2) the linkages between sectors within and among basin sub-regions, and (3) the EWL nexus implications of planned future agricultural development activities. Results show that water scarcity, driven in part by human demands that have historically reached 60% of total surface water supply, poses a substantial constraint to economic development in the basin. The Colorado basin has the potential to serve as a testbed for crafting novel and generalizable sub-regional EWL planning approaches capable of informing the EWL planning dialogue globally.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Combining biotechnology with sustainability: feasibility of bioenergy sorghum in generating high-value bioproducts

Biofuels generated through fermentation of plant-derived lignocellulosic biomass are currently not competitive with fossil fuels. Here, a framework is described for the engineering of valuable coproducts to improve the economic feasibility of biofuel production. To accomplish this goal, the desirable traits of the bioenergy crop Sorghum bicolor are harnessed via modern engineering approaches. A robust analysis is provided to highlight the scientific basis, costs, regulatory challenges, and lucrative nature of coproduct development. Sustainable biofuel production could also have far-reaching societal impacts, especially in the context of our rapidly changing global climate. This perspective suggests that the path to profitable biofuel production is attainable and encourages consideration of similar approaches by the biotechnology industry.

09 BIOMASS FUELS↗

DOE OSTI2020

US energy system transitions under cumulative emissions budgets

Cumulative emissions budgets are increasingly being used by decision makers and analysts to understand emissions reductions and associated transitions in the context of long-term goals such as limiting global mean temperature increase over the century to 1.5 or 2°C (IPCC, 2014). While previous studies have explored the implications of cumulative emissions budgets for the global economy, few studies have conducted regional and national-level analyses (Iyer et al., 2015; Riahi et al., 2015). This paper explores cumulative emissions budgets through 2050 consistent with the 1.5 and 2°C long-term temperature goals in the context of the United States. We employ a state-level model of the United States embedded within a global human-Earth system model (GCAM-USA) to study the implications of such budgets for the U.S. energy system (Iyer et al., 2017a; Iyer et al., 2017b). Our results show that achieving the stringent cumulative emissions budgets entails accelerated deployment of energy conserving technology, almost complete decarbonization of the power sector and increased electrification of buildings and industrial end-use sectors and decarbonization of transport employing a combination of electrification and the substitution of bioenergy for fossil fuels by the mid-century. We also find substantial state-level differences in the relative roles of these decarbonization strategies. Furthermore, our results highlight that increased ambition in the near-term will be valuable in setting the stage for smoother transformations in the future to achieve stringent cumulative emissions budgets consistent with long-term temperature goals established by the international community.

Feijoo, Felipe↗

DOE OSTI2020

Implications of climate change mitigation strategies on international bioenergy trade

Most climate change mitigation scenarios rely on increased use of bioenergy to decarbonize the energy system. Here we use results from the 33rd Energy Modeling Forum study (EMF-33) to investigate projected international bioenergy trade for different integrated assessment models across several climate change mitigation scenarios. Results show that in scenarios with no climate policy, international bioenergy trade is likely to increase over time, and becomes even more important when climate targets are set. More stringent climate targets, however, do not necessarily imply greater bioenergy trade compared to weaker targets, as final energy demand may be reduced. However, the scaling up of bioenergy trade happens sooner and at a faster rate with increasing climate target stringency. Across models, for a scenario likely to achieve a 2 °C target, 10–45 EJ/year out of a total global bioenergy consumption of 72–214 EJ/year are expected to be traded across nine world regions by 2050. While this projection is greater than the present trade volumes of coal or natural gas, it remains below the present trade of crude oil. This growth in bioenergy trade largely replaces the trade in fossil fuels (especially oil) which is projected to decrease significantly over the twenty-first century. As climate change mitigation scenarios often show diversified energy systems, in which numerous world regions can act as bioenergy suppliers, the projections do not necessarily lead to energy security concerns. Nonetheless, rapid growth in the trade of bioenergy is projected in strict climate mitigation scenarios, raising questions about infrastructure, logistics, financing options, and global standards for bioenergy production and trade.

09 BIOMASS FUELS↗

DOE OSTI2021

Observations of greenhouse gases as climate indicators

Humans have significantly altered the energy balance of the Earth’s climate system mainly not only by extracting and burning fossil fuels but also by altering the biosphere and using halocarbons. The 3rd US National Climate Assessment pointed to a need for a system of indicators of climate and global change based on long-term data that could be used to support assessments and this led to the development of the National Climate Indicators System (NCIS). Here we identify a representative set of key atmospheric indicators of changes in atmospheric radiative forcing due to greenhouse gases (GHGs), and we evaluate atmospheric composition measurements, including non-CO<:sub>2 GHGs for use as climate change indicators in support of the US National Climate Assessment. GHG abundances and their changes over time can provide valuable information on the success of climate mitigation policies, as well as insights into possible carbon-climate feedback processes that may ultimately affect the success of those policies. To ensure that reliable information for assessing GHG emission changes can be provided on policy-relevant scales, expanded observational efforts are needed. Furthermore, the ability to detect trends resulting from changing emissions requires a commitment to supporting long-term observations. Long-term measurements of greenhouse gases, aerosols, and clouds and related climate indicators used with a dimming/brightening index could provide a foundation for quantifying forcing and its attribution and reducing error in existing indicators that do not account for complicated cloud processes.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Synthetic microbial communities: Bridging research and application in second-generation bioenergy feedstock microbiomes

The sustainable production of purpose-grown bioenergy feedstocks is essential in transitioning away from fossil fuels. Synthetic communities (SynComs) are consortia of microorganisms that can be used as biological interventions to support objectives like plant growth and stress tolerance. This review examines the state of knowledge regarding microbiomes and SynComs of second-generation bioenergy feedstocks, focusing on the rhizosphere. We first provide an overview of second-generation feedstocks, including switchgrass (Panicum virgatum), miscanthus (Miscanthus × giganteus), sorghum (Sorghum spp.), sugarcane (Saccharum spp.), and poplar (Populus spp.), and summarize our current understanding of their plant-soil-microbiome ecology. We next discuss considerations in the objectives, design, and evaluation of SynComs to enhance feedstock production, and then critically review the literature around their use. Our literature analysis revealed that SynCom performance varied substantially between controlled pilot experiments and field trials, possibly due to system complexity that could not be fully considered in their design and pilot evaluation. We identified a gap in the use of SynComs to support the unique sustainability objectives of biofuel feedstock agriculture, presenting an opportunity to leverage these additional microbial traits in SynCom designs. Finally, we emphasize the importance of targeted research to identify the ecological principles that govern the assembly, activation, and persistence of microbes in the feedstock rhizosphere, thereby enhancing our capacity to manage microbiomes under diverse environmental conditions and ensure their functionality. Beyond biofuels, SynComs are a promising microbiome management strategy for crop production; however, an ecologically informed design and evaluation of SynComs are advised.

SynCom↗