Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Feedstock Production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Selective oxidation of 3-hydroxypropionic acid to malonic acid over Pd/C: Mechanistic and kinetic study

Malonic acid (MA) is a high-value dicarboxylic acid with strong industrial demand, yet its current production heavily relies on petrochemical feedstocks. Here, we report the first systematic study for sustainable production of MA via oxidation of 3-hydroxypropionic acid (3-HP) with a Pd/Carbon catalyst. The effects of oxidant type (O 2 and H 2 O 2 ), pH, and temperature on the reaction chemistry were comprehensively evaluated. Guided by experimental observation and DFT-calculated thermochemical energetics, reaction networks for 3-HP oxidation with both oxidants are proposed and validated through kinetic modeling. MA was identified as the primary oxidation product, while further oxidation yields acetic acid and oxalic acid. The kinetic model validated the network, displaying excellent agreement (R 2 > 0.95). Kinetic observations also enabled a direct comparison between O 2 and H 2 O 2 and revealed their distinct behaviors. The model was further developed into a temperature-time map, providing insight into conditions that maximize MA production. Malonic acid selectivity of 56.9 % and yield of 50.5 % were achieved at 3 bar oxygen, equimolar NaOH:3-HP ratio, and 50 °C.

3-hydroxypropionic acid↗
DOE OSTI2021

Efficient Screening of Bi–Metallic Electrocatalysts for Glycerol Valorization

Glycerol is a byproduct of biodiesel production and, as such, it is of limited economic value. By means of electrooxidation, glycerol can be used as a feedstock for scalable hydrogen production, in addition to conversion to value-added products. The development of novel and efficient catalytic electrode materials for the anodic side of the reaction is a key towards a hydrogen-based energy economy. In the present study, a computational screening protocol combining DFT, scaling relations, and microkinetic modeling allows for a rational selection of novel catalysts that can deliver efficient glycerol electrooxidation, low cost of production, and environmental sustainability. Activity and chemical selectivity towards hydrogen production on pure metal catalysts is discussed in terms of volcano-shaped plots. We find that the selectivity in the glycerol oxidation reaction is influenced by a different energy landscape when in the presence of water and best classified by a comparison of O—H and C—H bond-breaking barriers. In addition, we screened 3570 bi-metallic catalysts in the AB (L1 0 ) and A 3 B (L1 2 ) ordered structures for activity, stability, price, and toxicity. By filtering based on the criteria for toxicity, resistance to oxidation, miscibility, and price, we have identified 5 L1 0 structured catalysts (AgPd, AuPd, PtSb, CuPt, and AgPt) and 20 L1 2 catalysts (Ga 3 Ta, In 3 Ta, Ir 3 W, Ir 3 Mo, Cu 3 Pt, Ir 3 Ta, Ir 3 Re, Pd 3 Bi, Pd 3 Cu, Pd 3 W, Pd 3 Co, Pd 3 Sn, Pd 3 Mo, Pd 3 Ag, Pd 3 Ga, Pd 3 Ta, Au 3 Ru, Pd 3 In, Au 3 Ir, and Pd 3 Au) that are all predicted to show high activity. We also identify an additional 37 L1 0 and 92 L1 2 structured electrocatalysts with an anticipated medium-high activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hydrothermal catalytic conversion of oleic acid to heptadecane over Ni/ZrO 2

There is growing interest in the substitution of expensive noble metal catalysts with low-cost earth-abundant metals in applications targeting biofuels production from waste organic feedstocks. Here, nickel (Ni) catalysts supported on zirconium dioxide (ZrO 2 ), both with and without copper (Cu) as a co-metal, were tested in hydrothermal reactions of unsaturated and saturated C18 fatty acids as models for waste oil feedstocks. In contrast to recent reports, this study showed no enhancement of nickel's activity for fatty acid conversion to alkane products when Cu was present. Ni/ZrO 2 prepared by metal coprecipitation methods converted 100% of oleic acid with 25% selectivity to heptadecane after 5h of reaction at 350 °C using methanol as a hydrogen donor source, increasing to 41% heptadecane after 20 h. Lower yields were observed with catalysts prepared by wet impregnation and using alternative hydrogen donor sources (glycerol, formic acid). Greater selectivity to heptadecane was also observed at higher temperatures (370 °C) and when the initial fatty acid had greater saturation. Longer term exposure to hydrothermal media led to metal sintering and catalyst deactivation. Findings support a path forward to the development of earth-abundant metal catalysts for the upgrading of waste organic feedstocks.

09 BIOMASS FUELS↗
NASA NTRS1991

Manufacturing Ethyl Acetate From Fermentation Ethanol

Conceptual process uses dilute product of fermentation instead of concentrated ethanol. Low-concentration ethanol, extracted by vacuum from fermentation tank, and acetic acid constitutes feedstock for catalytic reaction. Product of reaction goes through steps that increases ethyl acetate content to 93 percent by weight. To conserve energy, heat exchangers recycle waste heat to preheat process streams at various points.

Rohatgi, Naresh K.↗
DOE OSTI2022

Incremental approach for the life-cycle greenhouse gas analysis of carbon capture and utilization

Electro-fuels (e-fuels) are examples of carbon capture and utilization (CCU) hydrocarbon products that are derived from captured carbon dioxide (CO 2 ), while using renewable electricity as the energy feedstock. The environmental impacts of CCU products (e.g., e-fuel) are systematically quantified through life-cycle analysis (LCA). Previous studies evaluating LCA of e-fuels proposed frameworks with an expanded system boundary approach that included the entire supply chain of the production process generating the CO 2 for CCU, in addition to the supply chain of the CCU product. This expanded system boundary approach evaluates two system boundaries, and uses deduction methods to calculate the carbon intensity (CI) of the CCU product (e-fuel). This paper proposes a simpler system boundary using an incremental approach that can calculate identical CI of the CCU product (e-fuel), while avoiding the extensive calculations in the expanded system boundary framework. The proposed incremental approach allocates the burdens of the CO 2 capturing process to the CO 2 feedstock supplying the CCU production process (e.g., e-fuel production). The CI of the captured CO 2 supplied to CCU process is determined by the energy and material requirements for the CO 2 capturing process and transportation to the CCU plant. Thus, the CI of CO 2 supplied to CCU process can be directly linked to the CI of e-fuel without the need to conduct LCA of the preceding process that generates the CO 2 for CCU.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Data for Simultaneous Suppression of Lignin, Tricin and Wall-Bound Phenolic Biosynthesis via the Expression of Monolignol 4- O -Methyltransferases in Rice

Grass lignocelluloses feature complex compositions and structures. In addition to the presence of conventional lignin units from monolignols, acylated monolignols and flavonoid tricin also incorporate into lignin polymer; moreover, hydroxycinnamates, particularly ferulate, cross-link arabinoxylan chains with each other and/or with lignin polymers. These structural complexities make grass lignocellulosics difficult to optimize for effective agro-industrial applications. In the present study, we assess the applications of two engineered monolignol 4- O -methyltransferases (MOMTs) in modifying rice lignocellulosic properties. Two MOMTs confer regiospecific para-methylation of monolignols but with different catalytic preferences. The expression of MOMTs in rice resulted in differential but drastic suppression of lignin deposition, showing more than 50% decrease in guaiacyl lignin and up to an 90% reduction in syringyl lignin in transgenic lines. Moreover, the levels of arabinoxylan-bound ferulate were reduced by up to 50%, and the levels of tricin in lignin fraction were also substantially reduced. Concomitantly, up to 11 μmol/g of the methanol-extractable 4- O -methylated ferulic acid and 5–7 μmol/g 4- O -methylated sinapic acid were accumulated in MOMT transgenic lines. Both MOMTs in vitro displayed discernible substrate promiscuity towards a range of phenolics in addition to the dominant substrate monolignols, which partially explains their broad effects on grass phenolic biosynthesis. The cell wall structural and compositional changes resulted in up to 30% increase in saccharification yield of the de-starched rice straw biomass after diluted acid-pretreatment. These results demonstrate an effective strategy to tailor complex grass cell walls to generate improved cellulosic feedstocks for the fermentable sugar-based production of biofuel and bio-chemicals.

Biomass Analytics↗
DOE OSTI2023

Editorial: Synthetic metabolism for the third-generation (3G) biorefineries

The demand for energy has increased significantly to meet the development of the economy and the increasing population. With the continuous consumption of energy, the shortage of non-renewable resources and the greenhouse effect have aroused worldwide attention. Therefore, the conversion of one-carbon substrates such as formate, methanol, and carbon dioxide (CO 2 ) as sustainable feedstocks into high-value-added products is a potential way to address such concerns. Although one-carbon substrates can be converted into organics by natural pathways, these pathways may not be optimal due to the multiple enzymes involved and remarkable amounts of energy consumption. Thus, synthetic biology, as an emerging field, offers a new approach to boost one-carbon bioconversion.

09 BIOMASS FUELS↗
NASA NTRS2010

The Roles of Beneficiation in Lunar Work

Natural feedstocks used for any process are intrinsically variable. They may also contain deleterious components or low concentrations of desired fractions. For these three reasons it is standard industrial practice to beneficiate feedstocks. This is true across all industries which trans-form raw materials into standardized units. On the Moon there are three natural resources: vacuum, radiation and regolith. To utilize in situ resources on the Moon it is reasonable to presume some beneficiation of the regolith (ground rock) resource will be desirable if not essential. As on Earth, this will require fundamental understanding of the physics and chemistry of the relevant processes, which are exceeding complex in detail. Further, simulants are essential test articles for evaluation of components and systems planned for lunar deployment. Simulants are of course made from geologic feedstocks. Therefore, there is variation, deleterious components and incorrect concentrations of desired fractions in the feedstocks used for simulants. Thus, simulant production can benefit from beneficiation of the input feedstocks. Beneficiation of geologic feedstocks is the subject of extractive metallurgy. Clearly, NASA has two discrete interests pertaining to the science and technology of extractive metallurgy.

Rickman, Doug L.↗
DOE OSTI2024

Highly efficient La/Ni co-doped strontium titanate catalyst for co-production of propylene and hydrogen from propane in protonic ceramic electrochemical cells

A highly efficient La/Ni co-doped strontium titanate (LSNT) perovskite catalyst is developed and integrated in a protonic ceramic electrochemical cell for co-production of propylene and high-purity hydrogen from commercial propane feedstock. Propane conversion and hydrogen production rate can be effectively enhanced under an applied current due to the electrochemical promotion effect and/or shifted reaction equilibrium induced by rapid separation of hydrogen product. Water vapor in the feed gas could significantly improve the catalyst stability by suppressing the coke formation. The propane conversion could reach up to 53% at 600 °C under a current density of 90 mA cm −2 . The LSNT catalyst also shows excellent tolerance for the sulfur contaminant in commercial propane gas. Finally, the excellent performance of the LSNT catalyst is attributed to the highly active and selective Ni species at the interface with the perovskite substrate, which are formed in situ via reduction-induced exsolution under reaction conditions.

interfacial active sites↗
DOE OSTI2026

Data for Selective Oxidation of 3-Hydroxypropionic Acid to Malonic Acid over Pd/C: Mechanistic and Kinetic Study

Malonic acid (MA) is a high-value dicarboxylic acid with strong industrial demand, yet its current production heavily relies on petrochemical feedstocks. Here, we report the first systematic study for the sustainable production of MA via oxidation of 3-hydroxypropionic acid (3-HP) with a Pd/Carbon catalyst. The effects of oxidant type (O2 and H2O2), pH, and temperature on the reaction chemistry were comprehensively evaluated. Guided by experimental observation and DFT-calculated thermochemical energetics, reaction networks for 3-HP oxidation with both oxidants are proposed and validated through kinetic modeling. MA was identified as the primary oxidation product, while further oxidation yields acetic acid and oxalic acid. The kinetic model validated the network, displaying excellent agreement (R2 > 0.95). Kinetic observations also enabled a direct comparison between O2 and H2O2 and revealed their distinct behaviors. The model was further developed into a temperature-time map, providing insight into conditions that maximize MA production. Malonic acid selectivity of 56.9 % and yield of 50.5 % were achieved at 3 bar oxygen, equimolar NaOH:3-HP ratio, and 50 °C.

Bioproducts↗
DOE OSTI2021

Integrated Landscape Management to Reduce Biomass Feedstock Access Costs

Using geospatial, machine learning, and optimization techniques, a field scoring and design framework known as the bioenergy Landscape Environmental Assessment and Design System (bioLEADS) was developed and used to show through modelling that it is possible to reduce biomass feedstock access costs, improve field revenue, and shift intensive row crop production away from subfield areas susceptible to erosion and low in soil organic carbon. The purpose of bioLEADS is to automate agricultural field selection and subfield allocation to perennial energy crop production while incorporating reduced biomass feedstock access costs to support attaining the U.S. Department of Energy (DOE) Bioenergy Technologies Office (BETO) cost targets.

09 BIOMASS FUELS↗
DOE OSTI2026

Data and code from: Selective oxidation of 3-hydroxypropionic acid to malonic acid over Pd/C: Mechanistic and kinetic study

Malonic acid (MA) is a high-value dicarboxylic acid with strong industrial demand, yet its current production heavily relies on petrochemical feedstocks. Here, we report the first systematic study for the sustainable production of MA via oxidation of 3-hydroxypropionic acid (3-HP) with a Pd/Carbon catalyst. The effects of oxidant type (O2 and H2O2), pH, and temperature on the reaction chemistry were comprehensively evaluated. Guided by experimental observation and DFT-calculated thermochemical energetics, reaction networks for 3-HP oxidation with both oxidants are proposed and validated through kinetic modeling. MA was identified as the primary oxidation product, while further oxidation yields acetic acid and oxalic acid. The kinetic model validated the network, displaying excellent agreement (R2 > 0.95). Kinetic observations also enabled a direct comparison between O2 and H2O2 and revealed their distinct behaviors. The model was further developed into a temperature-time map, providing insight into conditions that maximize MA production. Malonic acid selectivity of 56.9 % and yield of 50.5 % were achieved at 3 bar oxygen, equimolar NaOH:3-HP ratio, and 50 °C.

3-Hydroxypropionic Acid↗
DOE OSTI2026

Massachusetts and New England Sustainable Aviation Fuel Study

The Massachusetts Port Authority established a project to assess feedstock availability to produce SAF near 10 New England airports. A techno-economic analysis was conducted to determine renewable fuels and SAF that could be produced from these feedstocks. The resource assessment found municipal solid waste, woody biomass, and food waste were most abundant. The techno-economic analysis found that potential fuel production varied widely based on location, feedstock, and technology production pathway ranging from 1 to 369 million gallons of gasoline equivalent per year. An assessment of infrastructure readiness to handle SAF was conducted. It was determined that SAF produced outside of New England should be blended in other regions with more capacity and flexibility and delivered to New England as Jet A is today. For SAF produced in New England, there are terminals that have existing infrastructure to receive, blend, and distribute SAF/Jet A blends.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

Massachusetts and New England SAF Study [Slides]

The Massachusetts Port Authority established a project to assess feedstock availability to produce SAF near 10 New England airports. A techno-economic analysis was conducted to determine renewable fuels and SAF that could be produced from these feedstocks. The resource assessment found municipal solid waste, woody biomass, and food waste were most abundant. The techno-economic analysis found that potential fuel production varied widely based on location, feedstock, and technology production pathway. An assessment of infrastructure readiness to handle SAF was conducted. It was determined that SAF produced outside of New England should be blended in other regions with more capacity and flexibility and delivered to New England as Jet A is today. For SAF produced in New England, there are terminals that have existing infrastructure to receive, blend, and distribute SAF/Jet A blends.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Improved Productivity with Multilaser Rotary Powder Bed Fusion Additive Manufacturing

Laser powder bed fusion (LPBF) enables the fabrication of intricate, geometrically complex structures with a sufficiently fine surface finish for many engineering applications with a diversity of available feedstock metals. However, the production rate of LPBF systems is not well suited for mass production in comparison to traditional manufacturing methods. LPBF systems measure their deposition rates in 100's of grams per hour, while other processes measure in kilograms per hour or even in the case of processes such as forming, stamping, and casting, 100's of kilograms per hour. To be widely adopted in industry for mass production, LPBF requires a new scalable architecture that enables many orders of magnitude improvement in deposition rate, while maintaining the geometry freedom of additive manufacturing. This article explores concepts that could achieve as much as four orders of magnitude increase in the production rate through the application of (1) rotary table kinematic arrangements; (2) a dramatic number of simultaneously operating lasers; (3) reductions of laser optic size; (4) improved scanning techniques; and (5) an optimization of toroidal build plate size. To theoretically demonstrate the possibilities of production improvements, a productivity analysis is proposed for synchronous reluctance motors with relevance to the electric vehicle industry, given the recent increase in the diversity of printable soft magnetic alloys. The analysis provides insights into the impact of the architecture and process parameters necessary to optimize rotary powder bed fusion for mass production.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Designing Harvesting and Hauling Cost Models for Energy Cane Production for Biorefineries

The harvesting and hauling operations of bioenergy feedstock is an important area in biofuel production. Production costs can be minimized by maintaining optimal machinery units for these operations. The objective of this study is to design an optimal harvesting unit for bioenergy refinery and estimate harvesting and hauling costs of energy cane. A biorefinery with the annual capacity of processing twenty-five million imp. gallons of ethanol were considered. Given the efficiency of harvesting, a two-row soldier system was considered. Considering the year-round supply of energy cane to the refinery, the optimal machinery unit was designed, and the combined operation costs were derived. The average estimated ownership, repair, labor and fuel and lubricant costs of biomass harvest unit were calculated to be $\$$0.50, $\$$0.54, $\$$1.78 and $\$$1.51/mt, respectively. The costs distribution generated showed harvesting and hauling costs could range between $\$$5.47–$\$$9.23/mt of energy cane. The methodology and the research output will provide guidelines for investors in designing harvesting and hauling units and estimating costs for different scales of operation.

09 BIOMASS FUELS↗
DOE OSTI2023

Pilot Scale Testing of the Hydrophobic-Hydrophilic Separation Process to Produce Value-Added Products from Waste Coal

The primary objective of this project was to demonstrate the technical and economic feasibility of using the hydrophobic-hydrophilic separation (HHS) process to produce high-purity, value-added clean coal that could serve as feedstock for specialty carbon products from waste coal. An existing one-skid (i.e., the entire unit fits on a single tractor-trailer) HHS pilot-scale facility was used to process bituminous and anthracite waste coals to produce: 1) a clean coal containing less than 5% ash (super-clean) and 2) another containing less than 1.5% ash (ultra-clean), all of which contain single-digit moistures. Sufficient quantities of these products were to be generated to permit detailed evaluations by potential customers producing or developing new, high-value market applications. In addition, the project included the evaluation of several process improvements to reduce the capital and operating costs for a commercial HHS plant. A final objective was to complete an economic analysis, market-penetration analysis, and technology-gap analysis of the HHS technology and its products.

01 COAL, LIGNITE, AND PEAT↗