Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FERRITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Cellulose-precursor synthesis of nanocrystalline Co{sub 0.5}Cu{sub 0.5}Fe{sub 2}O{sub 4} spinel ferrites

Highlights: Black-Right-Pointing-Pointer Synthesis of spinel copper cobalt nanoferrite particles from a cellulose precursor for the first time. Control of nanosize and properties of nanoferrites can take place by varying the calcining temperature. The simple, low cost, easy cellulose process is a choice of nanoparticle processing technology. -- Abstract: Nanocrystalline Cu{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} powders were prepared via a metal-cellulose precursor synthetic route. Cellulose was used as a fuel and a dispersing agent. The resulting precursors were calcined in the temperature range of 450-600 Degree-Sign C. The phase development of the samples was determined by using Fourier transform infrared (FT-IR) spectroscopy and powder X-ray diffraction (XRD). The field-dependent magnetizations of the nanopowders were measured by vibrating sample magnetometer (VSM). All XRD patterns are of a spinel ferrite with cubic symmetry. Microstructure of the ferrites showed irregular shapes and uniform particles with agglomeration. From XRD data, the crystallite sizes are in range of 16-42 nm. Saturation magnetization and coercivity increased with increasing calcining temperature due to enhancement of crystallinity and reduction of oxygen vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deposition of nanostructured photocatalytic zinc ferrite films using solution precursor plasma spraying

Highlights: Black-Right-Pointing-Pointer Highly economic solution precursor route capable of producing films/coating even for mass scale production. Black-Right-Pointing-Pointer Pure spinel phase ZnFe{sub 2}O{sub 4} porous, immobilized films deposited in single step. Black-Right-Pointing-Pointer Parameter optimization yields access to nanostructuring in SPPS method. Black-Right-Pointing-Pointer The ecofriendly immobilized ferrite films were active under solar radiation. Black-Right-Pointing-Pointer Such magnetic system display advantage w.r.t. recyclability after photocatalyst extraction. -- Abstract: Deposition of pure spinel phase, photocatalytic zinc ferrite films on SS-304 substrates by solution precursor plasma spraying (SPPS) has been demonstrated for the first time. Deposition parameters such as precursor solution pH, concentration, film thickness, plasma power and gun-substrate distance were found to control physico-chemical properties of the film, with respect to their crystallinity, phase purity, and morphology. Alkaline precursor conditions (7 < pH {<=} 10) were found to favor oxide film formation. The nanostructured films produced under optimized conditions, with 500 mM solution at pH {approx} 8.0, yielded pure cubic phase ZnFe{sub 2}O{sub 4} film. Very high/low precursor concentrations yielded mixed phase, less adherent, and highly inhomogeneous thin films. Desired spinel phase was achieved in as-deposited condition under appropriately controlled spray conditions and exhibited a band gap of {approx}1.9 eV. The highly porous nature of the films favored its photocatalytic performance as indicated by methylene blue de-coloration under solar radiation. These immobilized films display good potential for visible light photocatalytic applications.

36 MATERIALS SCIENCE↗

Comparative study of NiFe{sub 2−x}Al{sub x}O{sub 4} ferrite nanoparticles synthesized by chemical co-precipitation and sol–gel combustion techniques

Graphical abstract: AFM images of NiFe{sub 2}O{sub 4} ferrite nanoparticles at room temperature synthesized by sol–gel technique. Highlights: ► Particle size reduces to less than 30 nm. ► DC electrical resistivity increases with substitution of Cr{sup 3+}. ► Dielectric constant decreases. -- Abstract: A series of aluminum substituted Ni-ferrite nanoparticles have been synthesized by chemical co-precipitation and sol–gel techniques. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscope (AFM), Fourier transform infrared spectroscopy (FTIR), DC electrical resistivity and dielectric properties. Analysis of the X-ray diffraction pattern of all the samples confirmed the formation of spinel structure. The crystallite sizes remain within the range 25–41 ± 3 nm. FTIR measurements show two fundamental absorption bands, assigned to the vibration of tetrahedral and octahedral sites. DC electrical resistivity increases from 6.60 × 10{sup 7} to 6.9 × 10{sup 10} Ω cm as the Al{sup 3+} concentration increases from 0.00 to 0.50. The dielectric constant and loss tangent decreases with increasing Al{sup 3+} concentration from 22 to 14, 0.354 to 0.27 respectively at 5 MHz for all the samples. Impedance measurements as a function of frequency (1 kHz–5 MHz) at room temperature further helped in analyzing the electrical properties of the prepared samples.

36 MATERIALS SCIENCE↗

Synthesis of nickel–zinc ferrite magnetic nanoparticle and dye degradation using photocatalytic ozonation

Graphical abstract: Display Omitted Highlights: ► Nickel–zinc ferrite magnetic nanoparticle (NZFMN) was synthesized and characterized. ► Dye degradation by photocatalytic ozonation using NZFMN was studied. ► Formate, acetate and oxalate were detected as dominant dye degradation aliphatic intermediates. ► Nitrate, sulfate and chloride ions were detected as mineralization products of dyes. ► NZFMN was an effective magnetic nanocatalyst to degrade dyes. -- Abstract: In this paper, nickel–zinc ferrite magnetic nanoparticle (NZFMN) was synthesized and its dye degradation ability using photocatalytic ozonation was investigated. The NZFMN was characterized by X-ray diffraction (XRD), scanning electron microscopic (SEM), Fourier transforms infrared (FTIR) and alternative gradient force magnetometer (AGFM). Reactive Red 198 (RR198) and Direct Green 6 (DG6) were used as dye models. UV–vis and ion chromatography (IC) analyses were employed to study dye degradation. The effects of operational parameters on decolorization such as NZFMN dosage, dye concentration, salt and pH were studied. RR198 and DG6 were completely decolorized (100%) by photocatalytic ozonation using NZFMN. Formate, acetate and oxalate anions were detected as dominant aliphatic intermediates. Nitrate, sulfate and chloride ions were detected as mineralization products of dyes. Results showed that the photocatalytic ozonation using NZFMN was a very effective method for dye degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of cobalt ferrite nanoparticles via a novel solvothermal approach using divalent iron salt as precursors

Graphical abstract: CoFe{sub 2}O{sub 4} nanoparticles are obtained via solvothermal approach using Fe{sup 2+} salt as iron resource. The magnetic properties can be modified by some additives. Display Omitted Highlights: ► CoFe{sub 2}O{sub 4} nanoparticles are synthesized by a facile one-step novel solvothermal method. ► The system is firstly performed in water–glycol mixture solvent with an ordinary air surrounding. ► The ferrous ions are used as iron source without adding oxidant. ► It is firstly found the low-coercivity CoFe{sub 2}O{sub 4} nanoparticles can be obtained with the help of some additives in the synthesis system. -- Abstract: Cobalt ferrite (CoFe{sub 2}O{sub 4}) nanoparticles are synthesized by a facile novel solvothermal method. The reactions are firstly performed in water–glycol system and Fe{sup 2+} salt is used as iron source without oxidant help. Some factors influenced the reactions, including temperature, reaction time, additives, are investigated. The samples are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM), respectively. The magnetic properties of some samples are detected by vibrating sample magnetometry techniques (VSM). It is firstly found that the magnetism of cobalt ferrites nanomaterials can be modified by some additives. The coercivity of CoFe{sub 2}O{sub 4} nanoparticles evidently decreases from 600 to 50 Oe in the presence of PEG-4000 in the system.

36 MATERIALS SCIENCE↗

Nanocrystalline spinel ferrite (MFe{sub 2}O{sub 4}, M = Ni, Co, Mn, Mg, Zn) powders prepared by a simple aloe vera plant-extracted solution hydrothermal route

Graphical abstract: This figure shows the specific magnetization curves of the as-prepared MFe{sub 2}O{sub 4} (M = Ni, Co, Mn, Mg, Zn) powders obtained from room temperature VSM measurement. These curves are typical for a soft magnetic material and indicate hysteresis ferromagnetism in the field ranges of ±500 Oe, ±1000 Oe, and ±2000 Oe for the CoFe{sub 2}O{sub 4}, MgFe{sub 2}O{sub 4} and MnFe{sub 2}O{sub 4} respectively, whereas the samples of NiFe{sub 2}O{sub 4} and ZnFe{sub 2}O{sub 4} show a superparamagnetic behavior. Highlights: ► Nanocrystalline MFe{sub 2}O{sub 4} powders were synthesized by a novel hydrothermal method. ► Metal acetylacetonates and aloe vera plant-extracted solution are used. ► This biosynthetic route is very simple and provides high-yield oxide nanomaterials. ► XRD and TEM results indicate that the prepared samples have only spinel structure. ► The maximum M{sub s} of 68.9 emu/g at 10 kOe were observed for the samples of MnFe{sub 2}O{sub 4}. - Abstract: Nanocrystalline spinel ferrite MFe{sub 2}O{sub 4} (M = Ni, Co, Mn, Mg, Zn) powders were synthesized by a novel hydrothermal method using Fe(acac){sub 3}, M(acac){sub 3} (M = Ni, Co, Mn, Mg, Zn) and aloe vera plant extracted solution. The X-ray diffraction and selected-area electron diffraction results indicate that the synthesized nanocrystalline have only spinel structure without the presence of other phase impurities. The crystal structure and morphology of the spinel ferrite powders, as revealed by TEM, show that the NiFe{sub 2}O{sub 4} and CoFe{sub 2}O{sub 4} samples contain nanoparticles, whereas the MnFe{sub 2}O{sub 4} and MgFe{sub 2}O{sub 4} samples consist of many nanoplatelets and nanoparticles. Interestingly, the ZnFe{sub 2}O{sub 4} sample contains plate-like structure of networked nanocrystalline particles. Room temperature magnetization results show a ferromagnetic behavior of the CoFe{sub 2}O{sub 4}, MnFe{sub 2}O{sub 4} and MgFe{sub 2}O{sub 4} samples, whereas the samples of NiFe{sub 2}O{sub 4} and ZnFe{sub 2}O{sub 4} exhibit a superparamagnetic behavior.

36 MATERIALS SCIENCE↗

Synthesis of NiCuZn-ferrite powders by means of mechanochemical treatment

Graphical abstract: The peak intensity for the product calcined at 500 °C is relatively weak, but it gradually increases with increasing the temperature. This implies that the temperature up to 700 °C leads to well crystallization of the spinel type of Ni{sub 0.45}Cu{sub 0.05}Zn{sub 0.5}Fe{sub 2}O{sub 4} phase. - Highlights: • NiCuZn-ferrite powders were obtained at a low temperature by mechanochemical activation. • The effects of the mechanical and thermal treatments on the mixtures were analyzed. • The mechanochemical method benefited achieving the lower M{sub s} and μ{sub i}. - Abstract: NiCuZn-ferrite powders were synthesized by mechanochemical treatments using NiCO{sub 3}⋅2Ni(OH){sub 2}⋅4H{sub 2}O, CuO, ZnO and Fe{sub 2}O{sub 3} as raw materials. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and vibrating sample magnetometer (VSM) were employed to evaluate the morphologies and structures of samples. The results indicated that the mechanochemical treatment produced several structural and chemical effects on reactants of the powder mixtures, and single phase Ni{sub 0.45}Cu{sub 0.05}Zn{sub 0.5}Fe{sub 2}O{sub 4} could be obtained after annealed at 700 °C for 2 h. In comparison with the traditional firing method, the mechanochemical method benefited achieving the lower M{sub s} and μ{sub i}, which indicated that the sample had better magnetic properties.

36 MATERIALS SCIENCE↗

Structural, electrical and dielectric properties of spinel nickel ferrite prepared by soft mechanochemical synthesis

Graphical abstract: - Highlights: • Sintered NiFe{sub 2}O{sub 4} was prepared by a soft mechanochemical route from mixture powders. • XRD and Raman measurements indicate that the prepared samples have spinel structure. • The activation energy ΔE are 0.653 and 0.452 eV for NiFe{sub 2}O{sub 4} samples. • Ferrite from Ni(OH){sub 2}/Fe{sub 2}O{sub 3} has lower DC conductivity than from Ni(OH){sub 2}/Fe(OH){sub 3} powders. • The values of dielectric constant of samples NiFe{sub 2}O{sub 4} are 70 and 200, respectively. - Abstract: Nickel ferrite, NiFe{sub 2}O{sub 4} was prepared by a soft mechanochemical route from a mixture of (1) Ni(OH){sub 2} and α-Fe{sub 2}O{sub 3} and (2) Ni(OH){sub 2} and Fe(OH){sub 3} powders in a planetary ball mill for 25 h. The powder samples were sintered at 1100 °C for 2 h and were characterized by X-ray diffraction (XRD), Raman spectroscopy and scanning electron microscopy (SEM). Impedance spectroscopy techniques were used to study the effect of grain and grain boundary on the electrical properties of the prepared samples. A difference in dielectric constant (ε) and dielectric loss tangent (tan δ) of NiFe{sub 2}O{sub 4} samples obtained by the same methods but starting from different initial components was observed.

36 MATERIALS SCIENCE↗

Comparison of structural and electrical properties of Co{sup 2+}doped Mn-Zn soft nano ferrites prepared via coprecipitation and hydrothermal methods

Graphical abstract: - Highlights: • Coprecipitation and hydrothermal synthesis of Co{sup 2+} doped Mn-Zn ferrites. • Dielectric measurements at 3 MHz and 1 GHz frequencies. • Enhanced DC electrical resistivity for samples prepared from hydrothermal technique. • Impedance studies for the prepared samples showing major contribution due to grains. - Abstract: A series of Co doped Mn-Zn ferrites compounds with the formula Mn{sub 0.5}Zn{sub 0.5−x}Co{sub x}Fe{sub 2}O{sub 4} (x = 0, 0.15, 0.25, 0.35 and 0.50) were successfully synthesized by polyethylene glycol-assisted coprecipitation and hydrothermal methods. The structural characterization of the samples was done using X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR). All the samples found to have cubic spinel structure. The average crystallite size of all nanoparticles were estimated using Scherrer's formula and found to lie between 10 and 25 ± 3 nm with small size distribution of particles prepared by hydrothermal method. The FTIR spectrum showed two absorption bands of tetrahedral and octahedral metal-oxygen sites. DC electrical resistivity varied from 4.12 × 10{sup 7} to 8.32 × 10{sup 10} ohm cm with cobalt doping. The dielectric measurements were performed from 20 Hz to 3 MHz and from 1 MHz to 1 GHz frequency ranges. The value of dielectric constant (ε′) varies from 15.54 to 106.25 (1 MHz) and 6.73–16.48 (1 GHz) for all the samples at room temperature. Impedance spectroscopy was carried out from 20 Hz to 3 MHz, at room temperature to study the grains and grain boundaries effect.

36 MATERIALS SCIENCE↗

Size dependent structural and magnetic properties of Al substituted Co–Mg ferrites synthesized by the sol–gel auto-combustion method

Highlights: • Well-crystalline Co{sub 0.7}Mg{sub 0.3}AlFeO{sub 4} nanoparticles with small grain size were obtained. • The approach is sol–gel auto-combustion technique for obtained nanoparticles. • The prepared Co{sub 0.7}Mg{sub 0.3}AlFeO{sub 4} ferrites are decent soft materials with low coercivity. • The minor decrease in lattice parameter with increase of temperature was observed. - Abstract: Single phased nanocrystalline Co{sub 0.7}Mg{sub 0.3}FeAlO{sub 4} ferrites having low coercivity were synthesized by the sol–gel auto-combustion route. The subsequent powder materials were sintered in a temperature range of 800–1200 °C for 2 h. The effects of sintering temperatures on the structure, morphology and magnetic properties of the prepared soft magnetic material were studied. X-ray diffractometer (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and magnetic property measurement system (MPMS) were used to characterize the samples. X-ray diffraction analysis confirmed a single-phase cubic spinel structure and ruled out the presence of impurities like hematite. The higher sintering temperatures have caused in enhanced mark of crystallinity and bigger average grain size of the nanocrystals. A slight decrease in lattice parameters was noticed with a rise of grain size. Magnetic measurements revealed that grain size increase led to a decrease in the coercivity and, in difference, an increase in the saturation magnetization.

36 MATERIALS SCIENCE↗

Structural elucidation, and morphological and magnetic behavior evaluations, of low-temperature sintered, Ce-doped, nanostructured garnet ferrites

Highlights: • Ce{sub x}Gd{sub 3.5-x}Fe{sub 4.5}O{sub 12} were synthesized via sol gel self-combustion route. • Crystallite size was found in the range of 20–38 nm. • Morphology of Ce-Gd doped and undoped garnets were observed systematically. • Switching field distribution was calculated for further applications of the nanoferrites. • These garnets also have potential applications in microwave high frequency devices. - Abstract: Low-temperature sintered Ce{sub x}Gd{sub 3.5-x}Fe{sub 4.5}O{sub 12} (x = 0.0, 0.4, 0.8, 1.2, 1.6, 2.0 and 2.4) garnet ferrites were synthesized via a sol-gel self-combustion route. Phase, structure, morphology and magnetic investigations were done using FTIR, XRD, FESEM, and VSM, respectively. Single-phase structures of all Ce{sup 3+} substituted nano-sized garnet ferrites were confirmed through XRD. The crystallite size was decreased with Ce{sup 3+}incorporation. Relevant structural parameters such as site radii, bond lengths, ionic radii, and shared edges were calculated using XRD. The vibrational spectroscopy stretching band studies were also done using FTIR. The grain size and morphology were also analyzed using FESEM. The magnetic remanance, saturation, and coercivity were found to increase systematically with an increase in Ce{sup 3+} concentration in these garnets. Switching field distribution curves were also plotted using the first derivative of the demagnetization data from MH loops. The better magnetic properties of these nanogarnets suggest their use for miniaturization of the devices in various applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and Atomic Structure Parameters of Sc-doped Barium Hexagonal Ferrites

Scandium-doped M-type barium hexagonal ferrites of the composition BaFe12?xScxO19 are well suited for low frequency microwave device applications such as isolators and circulators. A series of Sc-doped M-type barium hexagonal ferrite powders (x = 0-1.2) were prepared by conventional ceramic processing techniques. The resulting powders were verified to be pure phase and maintain the nominal chemical stoichiometry by x-ray diffraction and energy dispersive x-ray spectroscopy, respectively. Static magnetic measurements indicated that both saturation magnetization and uniaxial magnetocrystalline anisotropy field decreased with increasing concentration of scandium. Extended x-ray absorption fine structure measurements were carried out to clarify the correlation between the magnetic and atomic structure properties. It is found that the substituted Sc has a strong preference for the bipyramidal site. Nevertheless, the substitution did not introduce additional atomic structural disorder into the barium hexagonal structure. The structural study provided important evidence to quantitatively explain the change in dc and microwave magnetic properties due to Sc ion doping.

36 MATERIALS SCIENCE↗

Water-Soluble Spinel Ferrites by a Modified Polyol Process as Contrast Agents in MRI

Magnetic nanoparticles have recently been very attractive for biomedical applications. In this study, we have synthesized ferrite nanoparticles for application as contrast agents in MRI experiments. Fe{sub 3}O{sub 4} and MnFe{sub 2}O{sub 4} spinel ferrites with a mean size of 11-12 nm, were prepared by a modified polyol route in commercially available polyethylene glycol with molecular weight 600 (PEG-600). The reaction takes place in the presence of water soluble and non-toxic tri-block copolymer known as Pluronic registered F-127 (PEO{sub 100}-PPO{sub 65}-PEO{sub 100}). The nanoparticles have saturation magnetization values of 52 and 68 emu/g for MnFe{sub 2}O{sub 4} and Fe{sub 3}O{sub 4}, respectively. Both the Fe{sub 3}O{sub 4}, and MnFe{sub 2}O{sub 4} nanoparticles make stable solutions in water known as ferrofluids. Preliminary data demonstrated the capability of these nanoparticles to induce imaging contrast in T{sub 2} weighted MRI experiments, making these materials suitable for biomedical applications such as medical MRI.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Correlation between structural, magnetic, and dielectric properties of manganese substituted cobalt ferrite

Manganese (Mn) substituted cobalt ferrites (CoFe{sub 2−x}Mn{sub x}O{sub 4}, referred to CFMO) were synthesized and their structural, magnetic, and dielectric properties were evaluated. X-ray diffraction measurements coupled with Rietveld refinement indicate that the CFMO materials crystallize in the inverse cubic spinel phase. Temperature (T = 300 K and 10 K) dependent magnetization (M(H)) measurements indicate the long range ferromagnetic ordering in CoFe{sub 2−x}Mn{sub x}O{sub 4} (x = 0.00–0.15) ferrites. The cubic anisotropy constant (K{sub 1}(T)) and saturation magnetization (M{sub s}(T)) were derived by using the “law of approach” to saturation that describes the field dependence of M(H) for magnetic fields much higher than the coercive field (H{sub c}). Saturation magnetization (M{sub s}), obtained from the model, decreases with increasing temperature. For CoFe{sub 2}O{sub 4}, M{sub s} decreases from 3.63 μ{sub B} per formula unit (f.u.) to 3.47 μ{sub B}/f.u. with increasing temperature from 10 to 300 K. CFMO (0.00–0.15) exhibit the similar trend while the magnitude of M{sub s} is dependent on Mn-concentration. M{sub s}-T functional relationship obeys the Bloch's law. The lattice parameter and magnetic moment calculated for CFMO reveals that Mn ions occupying the Fe and Co position at the octahedral site in the inverse cubic spinel phase. The structure and magnetism in CFMO are further corroborated by bond length and bond angle calculations. The dielectric constant dispersion of CFMO in the frequency range of 20 Hz–1 MHz fits to the modified Debye's function with more than one ion contributing to the relaxation. The relaxation time and spread factor derived from modeling the experimental data are ∼10{sup −4} s and ∼0.35(±0.05), respectively.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of chromium doped zinc ferrite

Zinc chromium ferrites with chemical formula ZnCr{sub x}Fe{sub 2−x}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0) were prepared by Sol - Gel technique. The structural as well as magnetic properties of the synthesized samples have been studied and reported here. The structural characterizations of the samples were analyzed by using X – Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), and Transmission Electron Microscope (TEM). The single phase spinel cubic structure of all the prepared samples was tested by XRD and FTIR. The particle size was observed to decrease from 18.636 nm to 6.125 nm by chromium doping and induced a tensile strain in all the zinc chromium mixed ferrites. The magnetic properties of few samples (x = 0.0, 0.4, 1.0) were investigated using Vibrating Sample Magnetometer (VSM)

36 MATERIALS SCIENCE↗

Electrical and optical properties of gadolinium doped bismuth ferrite nanoparticles

Multiferroic bismuth ferrite (BFO) and gadolinium (Gd) doped bismuth ferrite had been synthesized by a sol-gel method. Particle size had been estimated by Transmission electron microscopy (TEM) and found to decrease with Gd doping. We studied the temperature and frequency dependence of impedance and electric modulus and calculated the grain and grain boundary resistance and capacitance of the investigated samples. We observed that electrical activation energy increases for all the doped samples. Optical band gap also increases for the doped samples which can be used in photocatalytic application of BFO.

36 MATERIALS SCIENCE↗

Observation of longitudinal spin-Seebeck effect in cobalt-ferrite epitaxial thin films

The longitudinal spin-Seebeck effect (LSSE) has been investigated in cobalt ferrite (CFO), an exceptionally hard magnetic spinel ferrite. A bilayer of a polycrystalline Pt and an epitaxially-strained CFO(110) exhibiting an in-plane uniaxial anisotropy was prepared by reactive rf sputtering technique. Thermally generated spin voltage in the CFO layer was measured via the inverse spin-Hall effect in the Pt layer. External-magnetic-field (H) dependence of the LSSE voltage (V{sub LSSE}) in the Pt/CFO(110) sample with H ∥ [001] was found to exhibit a hysteresis loop with a high squareness ratio and high coercivity, while that with H∥[11{sup -}0] shows a nearly closed loop, reflecting the different anisotropies induced by the epitaxial strain. The magnitude of V{sub LSSE} has a linear relationship with the temperature difference (ΔT), giving the relatively large V{sub LSSE} /ΔT of about 3 μV/K for CFO(110) which was kept even at zero external field.

36 MATERIALS SCIENCE↗

The Role of Alloying Elements in Nanostructured Ferritic Steels

The roles of the alloying elements in three nanostructured ferritic alloys (14YWT, MA957 and Eurofer 97) have been established through the characterisation of the microstructure by atom probe tomography and spectrum imaging in a transmission electron microscope. Cr, W, Mo, Ti and Y were found in the ferrite matrix and contributed to solid solution hardening. Ti, Y, C, O and N were found in high number densities of precipitates and nanoclusters both in the grain interior and on grain boundaries and thereby contributed to precipitation hardening. Cr, W and Mo were enriched at the intraparticle regions of the grain boundaries. The solute segregation and precipitation pinned the grain boundaries and contributed to the excellent creep properties of the alloys.

36 MATERIALS SCIENCE↗