Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy Exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Accretion in wind-driven X-ray sources

The hydrodynamics of axisymmetric accretion flow in stellar wind-fed X-ray sources is investigated, including momentum deposition by radiation, as well as radiative heating and cooling by Compton and bremsstrahlung processes. The results of two-dimensional numerical simulations for mass accretion rates ranging from 0.02 to 0.4 of the Eddington value reveal a variety of behaviors. At low rates radiative effects are unimportant, and the accretion flow is nearly adiabatic. In this case the flow is steady. For intermediate accretion rates, radiative heating and cooling effects become important. The flow remains steady, but the accretion rate is significantly reduced from the Hoyle-Lyttleton estimate. At the highest mass accretion rates, radiative momentum transfer and energy exchange are important and lead to nonsteady behavior. For the parameters relevant to massive X-ray binary systems accreting at high rates, the results reveal that the accretion flows can be complex and time dependent.

Taam, Ronald E.↗

Global heating distributions for January 1979 calculated from GLA assimilated and simulated model-based datasets

This study surveys the large-scale distribution of heating for January 1979 obtained from five sources of information. Through intercomparison of these distributions, with emphasis on satellite-derived information, an investigation is conducted into the global distribution of atmospheric heating and the impact of observations on the diagnostic estimates of heating derived from assimilated datasets. The results indicate a substantial impact of satellite information on diagnostic estimates of heating in regions where there is a scarcity of conventional observations. The addition of satellite data provides information on the atmosphere's temperature and wind structure that is important for estimation of the global distribution of heating and energy exchange.

Schaack, Todd K.↗

Monte Carlo analysis of dissociation and recombination behind strong shock waves in nitrogen

Computations are presented for the relaxation zone behind strong, 1D shock waves in nitrogen. The analysis is performed with the direct simulation Monte Carlo method (DSMC). The DSMC code is vectorized for efficient use on a supercomputer. The code simulates translational, rotational and vibrational energy exchange and dissociative and recombinative chemical reactions. A model is proposed for the treatment of three body-recombination collisions in the DSMC technique which usually simulates binary collision events. The model improves previous models because it can be employed with a large range of chemical-rate data, does not introduce into the flow field troublesome pairs of atoms which may recombine upon further collision (pseudoparticles) and is compatible with the vectorized code. The computational results are compared with existing experimental data. It is shown that the derivation of chemical-rate coefficients must account for the degree of vibrational nonequilibrium in the flow. A nonequilibrium-chemistry model is employed together with equilibrium-rate data to compute the flow in several different nitrogen shock waves.

Boyd, I. D.↗

Hydrogen no-vent fill testing in a 1.2 cubic foot (34 liter) tank

Experimental results of no-vent fill testing with liquid hydrogen in a 1.2 cubic foot (34 liter) stainless steel tank are presented. More than 40 tests were performed with various liquid inlet temperatures, inlet flowrates, initial tank wall temperatures, and liquid injection techniques. Fill levels equal to or exceeding 90 percent by volume were achieved in 40 percent of the tests with the tank pressure limited to a maximum of 30 psia. Three liquid injection techniques were employed; top spray, upward pipe discharge, and bottom diffuser. Effects of each of the varied parameters on the tank pressure history and final fill level are evaluated. The final fill level is found to be indirectly proportional to the initial wall and inlet liquid temperatures and directly proportional to the inlet liquid flowrate. Furthermore, the top spray is the most efficient no-vent fill method of the three configurations examined. The success of this injection method is primarily due to condensation of the ullage vapor onto the incoming liquid droplets. Ullage condensation counteracts the tank pressure rise resulting from energy exchange between the fluid and the warmer tank walls, and ullage compression. Upward pipe discharge from the tank bottom is the next most efficient method. Fluid circulation induced by this fill configuration tends to diminish thermal stratification in the bulk liquid, thus enhancing condensation at the liquid gas interface.

Moran, Matthew E.↗

Molecules and chains in a strong magnetic field - Statistical treatment

A Thomas-Fermi-Dirac-Weizsaecker statistical model is developed and employed to investigate diatomic molecules and infinite molecular chains in strong magnetic fields. The standard magnetic Thomas-Fermi-Dirac kinetic, potential, and exchange energy functionals are supplemented by a gradient correction to the kinetic energy. The numerical method used for solving this system in two spatial dimensions is detailed. Numerical solutions for a wide range of magnetic strengths and elements are presented to demonstrate the robustness, as well as the limitations, of the statistical approach. These calculations qualitatively reproduce many of the results of detailed quantum mechanical treatments. For example, the fractional binding energy is greatest for low atomic numbers and for strong magnetic fields.

Abrahams, Andrew M.↗

Electron number density profiles for the Aeroassist Flight Experiment

The basic features of a Microwave Reflectometer Ionization Sensor (MRIS) as designed for utilization on the Aeroassist Flight Experiment are described. A parametric study of the effects of trajectory and unknowns in the thermochemical nonequilibrium models for translational and vibrational-electronic energy exchange rates, reaction rates, and the average electronic excitation level of atoms is performed to illustrate how the MRIS data may be employed for code validation. This study, implemented with program LAURA, shows a particular sensitivity of the onset and severity of an electron avalanche phenomena associated with changes in these physical models.

Greendyke, Robert B.↗

Application of the DSMC method to hypersonic flow about a delta wing

The direct simulation Monte Carlo method was applied to a hypersonic rarefied flow about a delta wing at angle of incidence. Three-dimensional calculations were performed using a single-species gas model that accounts for energy exchange with the internal modes. Computed results were compared with the available experimental data obtained in a nitrogen wind-tunnel experiment. Discrepancies were shown to exist between the experimental and calculated results. These differences may be caused by the inadequately defined freestream conditions.

Celenligil, M. C.↗

Application of precise altimetry to the study of precise leveling of the sea surface, the Earth's gravity field, and the rotation of the Earth

Our program includes five research items: (1) determination of a precision geoid and gravity anomaly field; (2) precise leveling and detection of tidal changes of the sea surface and study of the role of the tide in the global energy exchange; (3) oceanic effect on the Earth's rotation and polar motion; (4) geological and geophysical interpretation of the altimetry gravity field; and (5) evaluation of the effectiveness of local tracking of TOPEX/POSEIDON by use of a laser tracker.

Segawa, J.↗

Computational techniques for flows with finite-rate condensation

A computational method to simulate the inviscid two-dimensional flow of a two-phase fluid was developed. This computational technique treats the gas phase and each of a prescribed number of particle sizes as separate fluids which are allowed to interact with one another. Thus, each particle-size class is allowed to move through the fluid at its own velocity at each point in the flow field. Mass, momentum, and energy are exchanged between each particle class and the gas phase. It is assumed that the particles do not collide with one another, so that there is no inter-particle exchange of momentum and energy. However, the particles are allowed to grow, and therefore, they may change from one size class to another. Appropriate rates of mass, momentum, and energy exchange between the gas and particle phases and between the different particle classes were developed. A numerical method was developed for use with this equation set. Several test cases were computed and show qualitative agreement with previous calculations.

Candler, Graham V.↗

Remote sensing of water vapor features

Water vapor plays a critical role in the atmosphere. It is an important medium of energy exchange between air, land, and water; it is a major greenhouse gas, providing a crucial radiative role in the global climate system; and it is intimately involved in many regional scale atmospheric processes. Our research has been aimed at improving satellite remote sensing of water vapor and better understanding its role in meteorological processes. Our early studies evaluated the current GOES VAS system for measuring water vapor and have used VAS-derived water vapor data to examine pre-thunderstorm environments. Much of that research was described at the 1991 Research Review. A second research component has considered three proposed sensors--the High resolution Interferometer Sounder (HIS), the Multispectral Atmospheric Mapping Sensor (MAMS), and the Advanced Microwave Sounding Unit (AMSU). We have focused on MAMS and AMSU research during the past year and the accomplishments made in this effort are presented.

Fuelberg, Henry E.↗

Luminosity segregation in galaxy clusters as an indication of dynamical evolution

Theoretical models describing the dynamical evolution of self-gravitating systems predict a spatial mass segregation for more evolved systems, with the more massive objects concentrated toward the center of the configuration. From the observational point of view, however, the existence of mass segregation in galaxy clusters seems to be a matter of controversy. A special problem in this connection is the formation of cD galaxies in the centers of galaxy clusters. The most promising scenarios of their formation are galaxy cannibalism (merger scenario) and growing by cooling flows. It seems to be plausible to consider the swallowing of smaller systems by a dominant galaxy as an important process in the evolution of a cD galaxy. The stage of the evolution of the dominant galaxy should be reflected by the surrounding galaxy population, especially by possible mass segregation effects. Assuming that mass segregation is tantamount to luminosity segregation we analyzed luminosity segregation in roughly 40 cD galaxy clusters. Obviously there are three different groups of clusters: (1) clusters with luminosity segregation, (2) clusters without luminosity segregation, and (3) such objects exhibiting a phenomenon which we call antisegregation in luminosity, i.e. a deficiency of bright galaxies in the central regions of clusters. This result is interpreted in the sense of different degrees of mass segregation and as an indication for different evolution stages of these clusters. The clusters are arranged in the three segregation classes 2, 1, and 0 (S2 = strong mass segregation, S1 = moderate mass segregation, S0 = weak or absent mass segregation). We assume that a galaxy cluster starts its dynamical evolution after virialization without any radial mass segregation. Energy exchange during encounters of cluster members as well as merger processes between cluster galaxies lead to an increasing radial mass segregation in the cluster (S1). If a certain degree of segregation (S2) has been established, an essential number of slow-moving and relative massive cluster members in the center will be cannibalized by the initial brightest cluster galaxy. This process should lead to the growing of the predominate galaxy, which is accompanied by a diminution of the mass segregation (transition to S1 and S0, respectively) in the neighborhood of the central very massive galaxy. An increase of the areal density of brighter galaxies towards the outer cluster regions (antisegregation of luminosity), i.e. an extreme low degree of mass segregation was estimated for a substantial percentage of cD clusters. This result favors the cannibalism scenario for the formation of cD galaxies.

Baier, F. W.↗

High accuracy computation of fluid-structure interaction in transonic cascades

A coupling strategy for simulating fluid-structure interaction phenomena is formulated and applied to the prediction of flutter in transonic cascades. The flow is governed by the Euler equations and discretized using a finite volume flux-splitting scheme. The structure is modeled using an isoparametric finite element formulation. The coupling strategy successfully reconciles these two formulations at the fluid-structure interface by enforcing both kinematic and kinetic boundary conditions. In particular, the conservation laws applicable to the combined fluid-structure system are preserved across the interface. Since the primary mechanism driving aeroelastic phenomena involves energy exchange occurring at the interface, this highly accurate coupling mechanism is believed to improve the predictive capability of the scheme. The coupled equations are advanced simultaneously in time using an implicit time integration method. Results obtained using the coupling method are presented for cascade geometries operating in transonic flow.

Boschitsch, Alexander↗

DSMC and continuum analyses of low-density nozzle flow

Two different approaches, the direct-simulation Monte Carlo (DSMC) method based on molecular gas dynamics and a finite-volume approximation of the Navier-Stokes equations, which are based on continuum gas dynamics, are employed in the analysis of a low-density gas flow in a small converging-diverging nozzle. The fluid experiences various kinds of flow regimes including continuum, slip, transition, and free-molecular. Results from the two numerical methods are compared with Rothe's experimental dam, in which density and rotational temperature variations along the centerline and at various locations inside a low density nozzle were measured by the electron-beam fluorescence technique. The continuum approach showed good agreement with the experimental data as far as density is concerned. The results from the DSMC method showed good agreement with the experimental data both in the density and the rotational temperature. It is also shown that the simulation parameters, such as the gas/surface interaction model, the energy exchange model between rotational and translational modes, and the viscosity temperature exponent, have substantial effects on the results of the DSMC method.

Chung, Chan-Hong↗

A review of transport theory

Ways in which energy change terms arise in the transport equation and how the various terms relate to the modes of energy exchange between the particles and plasma are shown. It is argued that the transport equation cannot be used to describe the initial acceleration of thermal particles by plasma shocks or relativistic shocks where the energetic particle speeds are never much greater than the flow speeds. In most other situations, it describes almost any acceleration process that can be caused by a moving plasma. It describes shock acceleration for both parallel shocks and oblique ones, and stochastic acceleration by the turbulent motion of the scatterers as well as by their motion across the magnetic field.

Jones, Frank C.↗

Determining electron temperature and density in a hydrogen microwave plasma

A three-temperature thermo-chemical model is developed for analyzing the chemical composition and energy states of a hydrogen microwave plasma used for studying diamond deposition. The chemical and energy exchange rate coefficients are determined from cross section data, assuming Maxwellian velocity distributions for electrons. The model is reduced to a zero-dimensional problem to solve for the electron temperature and ion mole fraction, using measured vibrational and rotational temperatures. The calculations indicate that the electron temperature may be determined to within a few percent error even though the uncertainty in dissociation fraction is many times larger.

Scott, Carl D.↗

Hydrogen no-vent fill testing in a 34 liter (1.2 cubic foot) tank

Experimental results of no-vent fill testing with liquid hydrogen in a 34 liter stainless steel tank are presented. More than 40 tests were performed with various liquid inlet temperatures, inlet flowrates, initial tank wall temperatures, and liquid injection techniques. Maximum pressure within the receiver tank was limited to 0.207 MPa (30 psia), and fill levels equal to or exceeding 90 percent by volume were achieved in 40 percent of the tests. Three liquid injection techniques were employed; top spray, upward pipe discharge, and bottom diffuser. Effects of each of the various parameters on the tank pressure history and final fill level are evaluated. The final fill level is found to be indirectly proportional to the initial wall and inlet liquid temperatures and directly proportional to the inlet liquid flowrate. Furthermore, the top spray is the most efficient no-vent fill method of the three configurations examined. The success of this injection method is primarily due to condensation of the ullage vapor onto the incoming liquid droplets. Ullage condensation counteracts the tank pressure rise resulting from energy exchange between the fluid and the warmer tank walls and from ullage compression.

Moran, Matthew E.↗

Characterizing terrestrial ecosystems and productivity from remote sensing data

Predictive relationships were studied between the leaf area index (LAI) of temperate coniferous forests and the canopy of reflective properties as sensed by satellites. Also, the relationship was examined between this sensible variable, LAI, and functional properties such as net primary productivity (NPP) and nitrogen mineralization. Leaf surface area is a locus of many important material and energy exchanges. If LAI can be reasonably estimated from remote sensing measurements, then it could be used with models to predict evapotranspiration, radiation interception, precipitation interception, and other ecosystem processes over large areas. Nineteen mature closed canopy forest stands were measured for leaf area index distributed along a temperature moisture gradient across Oregon. The LAI varies from 15.4 to 0.6. Infrared radiation is strongly scattered by leaves so that it penetrates deeply and its reflectance is proportional to LAI. Red radiation is strongly absorbed by chlorophyll and its reflectance is inversely related to LAI, becoming asymptotic at LAI values of about 3. The ratio of infrared to red radiation compensates for irradiance variations across this transect.

Peterson, David L.↗

Data analysis and theoretical studies of the upper mesosphere and lower thermosphere

The work proposed under this grant came in three parts. The first involved extending our continuing study of electrodynamical feedback between the thermosphere/ionosphere and the magnetosphere. The second was a model-experiment comparison study of global dynamics and the third was a 'spectral energetics' analysis of tidal dissipation and energy exchange mechanisms. In the past year, progress has been made on all three topics. A paper is in press about electrodynamic feedback, and another is also in press on an element of the 'spectral energetics' analysis. Furthermore, a paper is being prepared on global dynamics variations in response to geomagnetic storms. In addition, much of the data needed for further studies on global dynamics is being prepared for inclusion in a relational database. This report is organized into several separate sections. In the next section, we present an introduction to the work that we are doing in this proposal. We discuss the progress made in our work and some results in section 3. In the last section, we summarize the work.

Burns, Alan↗