Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Structure and mechanical properties of foils made of nanocrystalline beryllium

The phase composition and structural features of (45–90)-μm-thick foils obtained from nanocrystalline beryllium during multistep thermomechanical treatment have been established using electron microscopy, electron diffraction, electron backscattering diffraction, and energy-dispersive analysis. This treatment is shown to lead to the formation of a structure with micrometer- and submicrometer-sized grains. The minimum average size of beryllium grains is 352 nm. The inclusions of beryllium oxide (BeO) of different modifications with tetragonal (sp. gr. P4{sub 2}/mnm) and hexagonal (sp. gr. P6{sub 3}/mmc) lattices are partly ground during deformation to a size smaller than 100 nm and are located along beryllium grain boundaries in their volume, significantly hindering migration during treatment. The revealed structural features of foils with submicrometer-sized crystallites provide the thermal stability of their structural state. Beryllium with this structure is a promising material for X-ray instrument engineering and for the production of ultrathin (less than 10 μm) vacuum-dense foils with very high physicomechanical characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Original close-packed structure and magnetic properties of the Pb{sub 4}Mn{sub 9}O{sub 20} manganite

The crystal structure of the Pb{sub 4}Mn{sub 9}O{sub 20} compound (previously known as 'Pb{sub 0.43}MnO{sub 2.18}') was solved from powder X-ray diffraction, electron diffraction, and high resolution electron microscopy data (S.G. Pnma, a=13.8888(2) A, b=11.2665(2) A, c=9.9867(1) A, R{sub I}=0.016, R{sub P}=0.047). The structure is based on a 6H (cch){sub 2} close packing of pure oxygen 'h'-type (O{sub 16}) layers alternating with mixed 'c'-type (Pb{sub 4}O{sub 12}) layers. The Mn atoms occupy octahedral interstices formed by the oxygen atoms of the close-packed layers. The MnO{sub 6} octahedra share edges within the layers, whereas the octahedra in neighboring layers are linked through corner sharing. The relationship with the closely related Pb{sub 3}Mn{sub 7}O{sub 15} structure is discussed. Magnetization measurements reveal a peculiar magnetic behavior with a phase transition at 52 K, a small net magnetization below the transition temperature, and a tendency towards spin freezing. - Graphical abstract: The crystal structure of Pb{sub 4}Mn{sub 9}O{sub 20} is based on a 6H (cch){sub 2} close packing of 'h'-type (O{sub 16}) layers alternating with 'c'-type (Pb{sub 4}O{sub 12}) layers. The Mn atoms occupy octahedral interstices. The MnO{sub 6} octahedra share edges within the layers and corners across the layers. Magnetization measurements reveal a tendency towards spin freezing.

36 MATERIALS SCIENCE↗

Pb{sub 2.85}Ba{sub 2.15}Fe{sub 4}SnO{sub 13}: A new member of the A{sub n}B{sub n}O{sub 3n-2} anion-deficient perovskite-based homologous series

Pb{sub 2.85}Ba{sub 2.15}Fe{sub 4}SnO{sub 13}, a new n=5 member of the anion-deficient perovskite based A{sub n}B{sub n}O{sub 3n-2} (A=Pb, Ba, B=Fe, Sn) homologous series, was synthesized by the solid state method. The crystal structure of Pb{sub 2.85}Ba{sub 2.15}Fe{sub 4}SnO{sub 13} was investigated using a combination of neutron powder diffraction, electron diffraction, high angle annular dark field scanning transmission electron microscopy and Moessbauer spectroscopy. It crystallizes in the Ammm space group with unit cell parameters a=5.7990(1) A, b=4.04293(7) A and c=26.9561(5) A. The Pb{sub 2.85}Ba{sub 2.15}Fe{sub 4}SnO{sub 13} structure consists of quasi two-dimensional perovskite blocks separated by 1/2[110](1-bar 01){sub p} crystallographic shear (CS) planes. The corner-sharing FeO{sub 6} octahedra at the CS planes are transformed into edge-sharing FeO{sub 5} distorted tetragonal pyramids. The octahedral positions in the perovskite blocks between the CS planes are jointly taken up by Fe and Sn, with a preference of Sn towards the position at the center of the perovskite block. The chains of FeO{sub 5} pyramids and (Fe,Sn)O{sub 6} octahedra of the perovskite blocks delimit six-sided tunnels at the CS planes occupied by double chains of Pb atoms. The compound is antiferromagnetically ordered below T{sub N}=368{+-}15 K. Highlights: Black-Right-Pointing-Pointer Compound Pb{sub 2.85}Ba{sub 2.15}Fe{sub 4}SnO{sub 13} was synthesized and characterized for the first time. Black-Right-Pointing-Pointer It is a new member of the anion-deficient perovskite based homologous series A{sub n}B{sub n}O{sub 3n-2} with n=5. Black-Right-Pointing-Pointer Its structure consists of quasi two-dimensional perovskite blocks separated by interfaces. Black-Right-Pointing-Pointer Interfaces are made up of edge-sharing FeO{sub 5} distorted tetragonal pyramids. Black-Right-Pointing-Pointer Pb{sub 2.85}Ba{sub 2.15}Fe{sub 4}SnO{sub 13} is antiferromagnetically ordered below T{sub N}=368{+-}15 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase formation, crystal structures and magnetic properties of perovskite-type phases in the system La{sub 2}Co{sub 1+z}(Mg{sub x}Ti{sub 1-x}){sub 1-z}O{sub 6}

Perovskite-type cobaltates in the system La{sub 2}Co{sub 1+z}(Mg{sub x}Ti{sub 1-x}){sub 1-z}O{sub 6} were studied for z=0{<=}x{<=}0.6 and 0{<=}x<0.9, using X-ray and neutron powder diffraction, electron diffraction (ED), magnetic susceptibility measurements and X-ray absorption near-edge structure (XANES) spectroscopy. The samples were synthesised using the citrate route in air at 1350 {sup o}C. The space group symmetry of the structure changes from P2{sub 1}/n via Pbnm to R3-bar c with both increasing Mg content and increasing Co content. The La{sub 2}Co(Mg{sub x}Ti{sub 1-x})O{sub 6} (z=0) compounds show anti-ferromagnetic couplings of the magnetic moments for the Co below 15 K for x=0, 0.1 and 0.2. XANES spectra show for the compositions 0{<=}x{<=}0.5 a linear decrease in the L{sub 3}/(L{sub 3}+L{sub 2}) Co-L{sub 2,3} edge branching ratio with x, in agreement with a decrease of the average Co ion spin-state, from a high-spin to a lower-spin-state, with decreasing nominal Co{sup 2+} ion content. -- Graphical abstract: XRPD patterns for perovskite compounds along the lines La{sub 2}Co(Mg{sub x}Ti{sub 1-x})O{sub 6} and La{sub 2}Co{sub 1+z}(Mg{sub 0.5}Ti{sub 0.5}){sub 1-z}O{sub 6}. Display Omitted Research Highlights: {yields}Tuning of the oxidation state of Co in the perovskite system La{sub 2}Co{sub 1+z}(Mg{sub x}Ti{sub 1-x}){sub 1-z}O{sub 6}, z=0{<=}x{<=}0.6 and 0{<=}x<0.9. {yields}XANES study of the oxidation state of Co in the perovskite system La{sub 2}Co{sub 1+z}(Mg{sub x}Ti{sub 1-x}){sub 1-z}O{sub 6}, z=0{<=}x{<=}0.6 and 0{<=}x<0.9. {yields}Phase relations in the perovskite system La{sub 2}Co{sub 1+z}(Mg{sub x}Ti{sub 1-x}){sub 1-z}O{sub 6}, z=0{<=}x{<=}0.6 and 0{<=}x<0.9. {yields}Magnetic properties in the perovskite system La{sub 2}Co{sub 1+z}(Mg{sub x}Ti{sub 1-x}){sub 1-z}O{sub 6}, z=0{<=}x{<=}0.6 and 0{<=}x<0.9.

36 MATERIALS SCIENCE↗

Structure and magnetic properties of a new anion-deficient perovskite Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} with crystallographic shear structure

Graphical abstract: - Highlights: • Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} was obtained by solid state synthesis. • Its structure was refined from combination of XPD and TEM. • It is a new member of the perovskite-related homologous series A{sub n}B{sub n}O{sub 3n−2} with n = 5. • Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} is antiferromagnetically ordered below T{sub N} ≈350 K. - Abstract: Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13}, a new n = 5 member of the oxygen-deficient perovskite-based A{sub n}B{sub n}O{sub 3n−2} homologous series, was synthesized using a solid-state method. The crystal structure of Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} was investigated by a combination of synchrotron X-ray powder diffraction, electron diffraction, high-angle annular dark-field scanning transmission electron microscopy and Mössbauer spectroscopy. At 900 K, it crystallizes in the Ammm space group with the unit cell parameters a = 5.8459(1) Å, b = 4.0426(1) Å, and c = 27.3435(1) Å. In the Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} structure, quasi-two-dimensional perovskite blocks are periodically interleaved with ½[1 1 0] (1{sup ¯}01){sub p} crystallographic shear (CS) planes. At the CS planes, the corner-sharing FeO{sub 6} octahedra are transformed into chains of edge-sharing FeO{sub 5} distorted tetragonal pyramids. B-positions of the perovskite blocks between the CS planes are jointly occupied by Fe{sup 3+} and Sc{sup 3+}. The chains of the FeO{sub 5} pyramids and (Fe,Sc)O{sub 6} octahedra delimit six-sided tunnels that are occupied by double columns of cations with a lone electron pair (Pb{sup 2+}). The remaining A-cations (Bi{sup 3+}, Ba{sup 2+}) occupy positions in the perovskite block. According to the magnetic susceptibility measurements, Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} is antiferromagnetically ordered below T{sub N} ≈350 K.

36 MATERIALS SCIENCE↗

Mechanism of formation of curved Kikuchi lines

The mechanism of formation of curved Kikuchi lines, observed at displacement of point reflections from their normal positions, is proposed. Curving of Kikuchi lines is explained taking into account the participation of diffracted electron beams in the formation of Kikuchi electron diffraction patterns.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, electrochemical and magnetic characterization of the layered-type PrBa{sub 0.5}Sr{sub 0.5}Co{sub 2}O{sub 5+δ} perovskite

Structural, electrical and magnetic properties of the layered cobaltite PrBa{sub 0.5}Sr{sub 0.5}Co{sub 2}O{sub 5+δ} have been investigated by means of neutron diffraction, electron diffraction, thermogravimetric analysis and SQUID magnetometry. Rietveld analysis of neutron diffraction data shows the ordered distribution of oxygen vacancies in [PrO{sub δ}] planes which doubles the lattice parameters from the simple perovskite cell parameter as a≈2a{sub p} and c≈2a{sub p} (a{sub p} is the cell parameter of the simple Perovskite) yielding tetragonal symmetry in the P4/mmm space group. On heating, above 573 K in air, structural rearrangement takes place and the structure can be defined as a≈a{sub p} and c≈2a{sub p} in the same space group. Oxygen occupancies have been determined as a function of temperature from neutron diffraction results. Initially (≥373 K), oxygen occupancy was increased and then decreased with increasing temperature. It was found that at 973 K the total oxygen loss is calculated about 0.265 oxygen/formula unit. Oxygen vacancy ordering was observed below 573 K, and the oxygen occupancy decreases as cell volume increases with increasing temperature. Area specific resistance (ASR) measurements show a resistance of 0.153 Ωcm{sup 2} and 0.286 Ωcm{sup 2} at 973 K and 923 K, respectively. On cooling, paramagnetic to ferromagnetic and an incomplete ferromagnetic to antiferromagnetic transition takes place. Different behaviours in field cooled and zero-field-cooled measurements leads to a coexistence of ferromagnetic and antiferromagnetic order. - Graphical abstract: Structural phase changes in PrBa{sub 0.5}Sr{sub 0.5}Co{sub 2}O{sub 5+δ} at elevated temperatures determined by neutron powder diffraction. Depending on oxygen occupancy it form different phases at different temperatures. This pictures show the schematic 3D diagram of PrBa{sub 0.5}Sr{sub 0.5}Co{sub 2}O{sub 5+δ} at 295 K (a), 373 K (b) and 573 K (c). Co atoms are inside the octahedra/pyramid. Ba and Sr occupy the same site. Oxygens are in the corner of polyhedra. - Highlights: • Structural phase changes at high temperatures. • Ordered distribution of oxygen vacancies below 573 K. • Double Perovskite type structure below 373 K in the P4/mmm space group. • Structural changes have direct correlation with conductivity. • Low area specific resistance at 973 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theory of photoemission from cathodes with disordered surfaces

Linear-accelerator-based applications like x-ray free electron lasers, ultrafast electron diffraction, electron beam cooling, and energy recovery linacs use photoemission-based cathodes in photoinjectors for electron sources. Most of these photocathodes are typically grown as polycrystalline materials with disordered surfaces. In order to understand the mechanism of photoemission from such cathodes and completely exploit their photoemissive properties, it is important to develop a photoemission formalism that properly describes the subtleties of these cathodes. Here, the Dowell–Schmerge (D–S) model often used to describe the properties of such cathodes gives the correct trends for photoemission properties like the quantum efficiency (QE) and the mean transverse energy (MTE) for metals; however, it is based on several unphysical assumptions. In the present work, we use Spicer’s three-step photoemission formalism to develop a photoemission model that results in the same trends for QE and MTE as the D–S model without the need for any unphysical assumptions and is applicable to defective thin-film semiconductor cathodes along with metal cathodes. As an example, we apply our model to Cs 3 Sb thin films and show that their near-threshold QE and MTE performance is largely explained by the exponentially decaying defect density of states near the valence band maximum.

43 PARTICLE ACCELERATORS↗

Optical and electron spectroscopy study of initial stages of room-temperature Mg film growth on Si (111)

The initial stages of room-temperature Mg film growth of Si (111) were studied using low-energy electron diffraction, electron energy-loss spectroscopy, and differential reflectance spectroscopy. In the studied range of magnesium film thickness (h = 0-0.2 nm), the formation of semiconductor magnesium silicide (Mg{sub 2}Si), which is a promising material for silicon-silicide thermocouples, was detected. At small thicknesses of the deposited film, identical Mg{sub 2}Si clusters are formed. An increase in the number of Mg atoms results in the formation of two-dimensional and then three-dimensional Mg{sub 2}Si islands. Spectra of the optical response function {delta}{lambda}''{sub {theta}} were measured for all structures; these spectra represent a characteristic of optical properties of these structures.

36 MATERIALS SCIENCE↗

Structural Defects of Silver Hollandite, Ag x Mn 8 O y , Nanorods: Dramatic Impact on Electrochemistry

Hollandites (OMS-2) are an enticing class of sorbents, catalysts, and energy storage materials with a tunnel structure permitting one-dimensional insertion and deinsertion of ions and small molecules along the c direction. A 7-fold increase in delivered capacity for Li/Ag x Mn 8 O 16 electrochemical cells (160 versus 23 mAh/g) observed upon a seemingly small change in silver content ( x ~1.1 (L-Ag-OMS-2) and 1.6 (H-Ag-OMS-2)) led us to characterize the structure and defects of the silver hollandite material. In this work, Ag hollandite nanorods are studied through the combined use of local (atomic imaging, electron diffraction, electron energy-loss spectroscopy) and bulk (synchrotron based X-ray diffraction, thermogravimetric analysis) techniques. Selected area diffraction and high resolution transmission electron microscopy show a structure consistent with that refined by XRD; however, the Ag occupancy varies significantly even within neighboring channels. Both local and bulk measurements indicate a greater quantity of oxygen vacancies in L-Ag-OMS-2, resulting in lower average Mn valence relative to H-Ag-OMS-2. Electron energy loss spectroscopy shows a lower Mn oxidation state on the surface relative to the interior of the nanorods, where the average Mn valence is approximately Mn 3.7+ for H-Ag-OMS-2 and Mn 3.5+ for L-Ag-OMS-2 nanorods, respectively. The higher delivered capacity of L-Ag-OMS-2 may be related to more oxygen vacancies compared to H-Ag-OMS-2. Thus, the oxygen vacancies and MnO 6 octahedra distortion are assumed to open the MnO 6 octahedra walls, facilitating Li diffusion in the ab plane. These results indicate crystallite size and surface defects are significant factors affecting battery performance.

25 ENERGY STORAGE↗

Topological Antiferromagnetic Van der Waals Phase in Topological Insulator/Ferromagnet Heterostructures Synthesized by a CMOS-Compatible Sputtering Technique

Breaking time-reversal symmetry by introducing magnetic order, thereby opening a gap in the topological surface state bands, is essential for realizing useful topological properties such as the quantum anomalous Hall and axion insulator states. In this work, a novel topological antiferromagnetic (AFM) phase is created at the interface of a sputtered, c-axis-oriented, topological insulator/ferromagnet heterostructure—Bi 2 Te 3 /Ni 80 Fe 20 because of diffusion of Ni in Bi 2 Te 3 (Ni-Bi 2 Te 3 ). The AFM property of the Ni-Bi2Te3 interfacial layer is established by observation of spontaneous exchange bias in the magnetic hysteresis loop and compensated moments in the depth profile of the magnetization using polarized neutron reflectometry. Analysis of the structural and chemical properties of the Ni-Bi2Te3 layer is carried out using selected-area electron diffraction, electron energy loss spectroscopy, and X-ray photoelectron spectroscopy. These studies, in parallel with first-principles calculations, indicate a solid-state chemical reaction that leads to the formation of Ni=Te bonds and the presence of topological antiferromagnetic (AFM) compound NiBi 2 Te 4 in the Ni-Bi 2 Te 3 interface layer. The Neél temperature of the Ni-Bi 2 Te 3 layer is ≈ 63 K, which is higher than that of typical magnetic topological insulators (MTIs). The presented results provide a pathway toward industrial complementary metal-oxide-semiconductor (CMOS)-process-compatible sputtered-MTI heterostructures, leading to novel materials for topological quantum devices.

36 MATERIALS SCIENCE↗

On the direct synthesis of Cu(BDC) MOF nanosheets and their performance in mixed matrix membranes

High aspect-ratio nanosheets of metal-organic frameworks (MOFs) hold promise for use as selective flakes in gas separation membranes. However, simple and scalable methods for the synthesis of MOF nanosheets have thus far remained elusive. Here, we describe the direct synthesis of Cu(BDC) (BDC 2- = 1,4-benzenedicarboxylate) nanosheets with an average lateral size of 2.5 mu m and a thickness of 25 nm from a well-mixed solution. Characterization of the nanosheets by powder and thin film X-ray diffraction, electron microscopy, and electron diffraction reveals pronounced structural disorder that may affect their pore structure. Incorporation of the Cu (BDC) nanosheets into a Matrimid polymer matrix results in mixed matrix membranes (MMMs) that exhibit a 70% increase in the CO 2 /CH 4 selectivity compared with that of Matrimid. Finally, analysis of new and previously reported permeation data for Cu(BDC) MMMs using a mathematical model for selective flake composites indicates that further performance improvements could be achieved with the selection of different polymers for use in the continuous phase.

36 MATERIALS SCIENCE↗

Scalable Synthesis and Characterization of Multilayer γ-Graphyne, New Carbon Crystals with a Small Direct Band Gap

γ-Graphyne is the most symmetric sp 2 /sp 1 allotrope of carbon, which can be viewed as graphene uniformly expanded through the insertion of two-carbon acetylenic units between all the aromatic rings. To date, synthesis of bulk γ-graphyne has remained a challenge. In this work, we report the synthesis of multilayer γ-graphyne through crystallization-assisted irreversible cross-coupling polymerization. A comprehensive characterization of this new carbon phase is described, including synchrotron powder X-ray diffraction, electron diffraction, lateral force microscopy, Raman spectroscopy, infrared spectroscopy, and cyclic voltammetry. Experiments indicate that γ-graphyne is a 0.48 eV band gap semiconductor, with a hexagonal a-axis spacing of 6.88 Å and an interlayer spacing of 3.48 Å, which is consistent with theoretical predictions. The observed crystal structure has an aperiodic sheet stacking. The material is thermally stable up to 240 °C but undergoes transformation at higher temperatures. While conventional 2D polymerization and reticular chemistry rely on error correction through reversibility, we demonstrate that a periodic covalent lattice can be synthesized under purely kinetic control. The reported methodology is scalable and inspires extension to other allotropes of the graphyne family.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High voltage electron microscopy of lunar samples

Lunar pyroxenes from Apollo 11, 12, 14, and 15 were investigated. The iron-rich and magnesium-rich pyroxene specimens were crushed to a grain size of ca. 50 microns and studied by a combination of X-ray and electron diffraction, electron microscopy, 57 Fe Mossbauer spectroscopy and X-ray crystallography techniques. Highly ordered, uniform electron-dense bands, corresponding to exsolution lamellae, with average widths of ca. 230A to 1000A dependent on the source specimen were observed. These were?qr separated by wider, less-dense interband spacings with average widths of ca. 330A to 3100A. In heating experiments, splitting of the dense bands into finer structures, leading finally to obliteration of the exsolution lamellae was recorded. The extensive exsolution is evidence for significantly slower cooling rates, or possibly annealing, at temperatures in the subsolidus range, adding evidence that annealing of rock from the surface of the moon took place at ca. 600 C. Correlation of the band structure with magnetic ordering at low temperatures and iron clustering within the bands was studied.

Fernandez-Moran, H.↗

InP and GaAs characterization with variable stoichiometry obtained by molecular spray

Both InP and GaAs surfaces were studied in parallel. A molecular spray technique was used to obtain two semiconductor surfaces with different superficial compositions. The structures of these surfaces were examined by electron diffraction. Electron energy loss was measured spectroscopically in order to determine surface electrical characteristics. The results are used to support conclusions relative to the role of surface composition in establishing a Schottky barrier effect in semiconductor devices.

Massies, J.↗

Methods for Conducting Electron Backscattered Diffraction (EBSD) on Polycrystalline Organic Molecular Thin Films

Electron backscattered diffraction (EBSD) is a technique regularly used to obtain crystallographic information from inorganic samples. When EBSD is acquired simultaneously with emitting diodes data, a sample can be thoroughly characterized both structurally and compositionally. For organic materials, coherent Kikuchi patterns do form when the electron beam interacts with crystalline material. However, such patterns tend to be weak due to the low average atomic number of organic materials. This is compounded by the fact that the patterns fade quickly and disappear completely once a critical electron dose is exceeded, inhibiting successful collection of EBSD maps from them. In this paper, a new approach is presented that allows successful collection of EBSD maps from organic materials, here the extreme example of a hydrocarbon organic molecular thin film, and opens new avenues of characterization for crystalline organic materials.

42 ENGINEERING↗

A Denoising Autoencoder for Improved Kikuchi Pattern Quality and Indexing in Electron Backscatter Diffraction

The rapid collection and indexing of electron diffraction patterns as produced via electron backscatter diffraction (EBSD) has enabled crystallographic orientation and structural determination, as well as additional property-determining strain and dislocation density information with increasing speed, resolution, and efficiency. Pattern indexing quality is reliant on the noise of the collected electron diffraction patterns, which is often convoluted by sample preparation and data collection parameters. EBSD acquisition is sensitive to many factors and thus can result in low confidence index (CI), poor image quality (IQ), and improper minimization of fit, which can result in noisy datasets and misrepresent the microstructure. In an attempt to enable both higher speed EBSD data collection and enable greater orientation fit accuracy with noisy datasets, an image denoising autoencoder was implemented to improve pattern quality. Here, we show that EBSD data processed through the autoencoder results in a higher CI, IQ, and a more accurate degree of fit. In addition, using denoised datasets in HR-EBSD cross correlative strain analysis can result in reduced phantom strain from erroneous calculations due to the increased indexing accuracy and improved correspondence between collected and simulated patterns.

36 MATERIALS SCIENCE↗