Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electroactive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

High-performance polyvinyl chloride gel artificial muscle actuator with graphene oxide and plasticizer

A transparent and electroactive plasticized polyvinyl chloride (PVC) gel was investigated to use as a soft actuator for artificial muscle applications. PVC gels were prepared with varying plasticizer (dibutyl adipate, DBA) content. The prepared PVC gels were characterized using Fourier-transform infrared spectroscopy, thermogravimetric analysis, and dynamic mechanical analysis. The DBA content in the PVC gel was shown to have an inverse relationship with both the storage and loss modulus. The electromechanical performance of PVC gels was demonstrated for both single-layer and stacked multi-layer actuators. When voltage was applied to a single-layer actuator and then increased, the maximum displacement of PVC gels (for PVC/DBA ratios of 1:4, 1:6, and 1:8) was increased from 105.19, 123.67, and 135.55µm (at 0.5kV) to 140.93, 157.13, and 172.94µm (at 1.0kV) to 145.03, 191.34, and 212.84µm (at 1.5kV), respectively. The effects of graphene oxide (GO) addition in the PVC gel were also investigated. The inclusion of GO (0.1 wt.%) provided an approximate 20% enhancement of displacement and 41% increase in force production, and a 36% increase in power output for the PVC/ GO gel over traditional plasticizer only PVC gel. The proposed PVC/GO gel actuator may have promising applications in artificial muscle, small mechanical devices, optics, and various opto-electro-mechanical devices due to its low-profile, transparency, and electrical response characteristics.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

A fundamental look at electrocatalytic sulfur reduction reaction

The fundamental kinetics of the electrocatalytic sulfur reduction reaction (SRR), a complex 16-electron conversion process in lithium–sulfur batteries, is so far insufficiently explored. In this study, by directly profiling the activation energies in the multistep SRR, we reveal that the initial reduction of sulfur to the soluble polysulfides is relatively easy owing to the low activation energy, whereas the subsequent conversion of the polysulfides into the insoluble Li 2 S 2 /Li 2 S has a much higher activation energy, contributing to the accumulation of polysulfides and exacerbating the polysulfide shuttling effect. We use heteroatom-doped graphene as a model system to explore electrocatalytic SRR. We show that nitrogen and sulfur dual-doped graphene considerably reduces the activation energy to improve SRR kinetics. Density functional calculations confirm that the doping tunes the p-band centre of the active carbons for an optimal adsorption strength of intermediates and electroactivity. This study establishes electrocatalysis as a promising pathway to tackle the fundamental challenges facing lithium–sulfur batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Electrochemical detection of leukemia oncogenes using enzyme-loaded carbon nanotube labels

Here we describe an ultrasensitive electrochemical nucleic acids assay amplified by carbon nanotubes (CNTs)-based labels for the detection of human acute lymphocytic leukemia (ALL) related p185 BCR-ABL fusion transcript. The carboxylated CNTs were functionalized with horseradish peroxidase (HRP) molecules and target-specific detection probes (DP) via diimide-activated amidation, and used to label and amplify target hybridization signal. The activity of captured HRP was monitored by square-wave voltammetry measuring the electroactive enzymatic product in the presence of 2-aminophenol and hydrogen peroxide substrate solution. The effect of DP and HRP loading of the CNT-based labels on its signal-to-noise ratio of electrochemical detection was studied systematically for the first time. Under optimized conditions, the signal-amplified assay achieved a detection limit of 83 fM targets oligonuecleotides and a 4-order wide dynamic range of target concentration. The resulting assay allowed a robust discrimination between the perfect match and a three-base mismatch sequence. When subjected to full-length (491 bp) DNA oncogene, the approach demonstrated a detection limit of approximately 33 pg of the target gene. The high sensitivity and specificity of assay enabled PCR-free detection of target transcripts in as little as 65 ng of mRNA extracted from positive ALL cell lines SUP-B15, in comparison to those obtained from negative cell lines HL-60. The approach holds promise for simple, low cost and ultrasensitive electrochemical nucleic acids detection in portable devices, point-of-care and early disease diagnostic applications.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2014

Modulating structure and properties in organic chromophores: influence of azulene as a building block

The properties of isomeric azulene derivatives, substituted through the 5-membered ring, were examined using a combination of experimentation and theoretical calculations for a series of well-defined electroactive oligomers. The substitution pattern was shown to dramatically influence solid-state, electronic, and optical properties of the oligomers with acid-responsive materials only being observed when the azulenium cation could be directly stabilized by substituents on the 5-membered ring. Additionally, the absorption maxima and optical band-gaps of the azulenium cations can be tuned by the substitution position of the azulene ring by the chromophore.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Conjugated oligomers incorporating azulene building blocks – seven- vs. five-membered ring connectivity

The properties of isomeric azulene derivatives based on 7- versus 5-membered ring substitution were examined by the synthesis and characterization of well-defined electroactive oligomers. The substitution pattern was shown to dramatically influence solid-state, electronic and optical properties of the oligomers with acid-responsive materials only being observed when the azulenium cation could be directly stabilized by substituents in the 7-membered ring. Protonation was accompanied by a reversible color change and a strong red-shift of the absorption maximum as indicated by UV-vis studies. Here we show that the absorption maxima and optical band-gaps of azulenium cations can be tuned by the nature of the chromophore connected to the seven-membered ring of the azulene nucleus.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Electrochemical reduction of an Ag 2 VO 2 PO 4 particle: dramatic increase of local electronic conductivity

Previously, we reported that electrodes containing silver vanadium phosphate (Ag 2 VO 2 PO 4 ) powder exhibit a 15 000 fold increase in conductivity after discharge, concurrent with the formation of silver metal. In this study, in order to disentangle the complex nature of electrodes composed of electroactive powders, an electrochemical reduction of individual particles of Ag 2 VO 2 PO 4 was conducted, to more directly probe the intrinsic materials properties of Ag 2 VO 2 PO 4 . Specifically, individual particle conductivity data from a nanoprobe system combined with SEM and optical imaging results revealed that the depth of discharge within an Ag 2 VO 2 PO 4 particle is closely linked to the conductivity increase. Of note, the formation of silver metal may affect both inter- and intraparticle conductivity of the Ag 2 VO 2 PO 4 material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Electrochemical Reduction of Ag 2 VP 2 O 8 Composite Electrodes Visualized via In situ Energy Dispersive X-ray Diffraction (EDXRD). Unexpected Conductive Additive Effects

In our study, we characterize the deposition of silver metal nanoparticles formed during discharge of Li/Ag 2 VP 2 O 8 cells with composite cathodes containing conductive carbon additive. Using in situ energy dispersive X-ray diffraction (EDXRD) of an intact battery, the location and distribution of silver metal nanoparticles generated upon reduction-displacement deposition within an Ag 2 VP 2 O 8 cathode containing a pre-existing percolation network can be observed for the first time. Our study yielded unexpected results where higher rate initial discharge generated a more effective conductive matrix. This stands in contrast to cells with cathodes with no conductive additive where a low rate initial discharge proved more effective. Our results provide evidence that using conductive additives in conjunction with an in situ reduction-displacement deposition of silver metal provides a path toward the ultimate goal of complete electrical contact and full utilization of all electroactive particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

CuAAC-based assembly and characterization of a ruthenium–copper dyad containing a diimine–dioxime ligand framework

The design of molecular dyads combining a light-harvesting unit with an electroactive centre is highly demanded in the field of artificial photosynthesis. The versatile Copper-catalyzed Azide–Alkyne Cycloaddition (CuAAC) procedure was employed to assemble a ruthenium tris-diimine unit to an unprecedented azide-substituted copper diimine–dioxime moiety. The resulting Ru II Cu II dyad 4 was characterized by electrochemistry, 1 H NMR, EPR, UV-visible absorption, steady-state fluorescence and transient absorption spectroscopies. Photoinduced electron transfer from the ruthenium to the copper centre upon light-activation in the presence of a sacrificial electron donor was established thanks to EPR-monitored photolysis experiments, opening interesting perspectives for photocatalytic applications.

bio-inspired↗
DOE OSTI2016

Effective recycling of manganese oxide cathodes for lithium based batteries

Rechargeable lithium ion batteries (LIBs) occupy a prominent consumer presence due to their high cell potential and gravimetric energy density, there are also limited opportunities for electrode recycling. Currently used or proposed cathode recycling processes are multistep procedures which involve sequences of mechanical, thermal, and chemical leaching, where only the base material is recovered and significant processing is required to generate a recycled electrode structure. Another significant issue facing lithium based batteries is capacity fade due to structural degradation of the electroactive material upon extending cycling. Herein, inspired by heterogeneous catalyst thermal regeneration strategies, we present a new facile cathode recycling process, where previously used cathodes are removed from a cell, heat treated, and then inserted into a new cell restoring the delivered capacity and cycle life. An environmentally sustainable manganese based material is employed, where binder-free self-supporting (BFSS) electrodes are prepared using a fibrous, high aspect ratio manganese oxide active material. After 200 discharge–charge cycles, the recycled BFSS electrodes display restored crystallinity and oxidation state of the manganese centers with the resulting electrochemistry (capacity and coulombic efficiency) reminiscent of freshly prepared BFSS cathodes. Of note, the BFSS electrode structure is robust with no degradation during the cell disassembly, electrode recovery, washing, and heat treatment steps; thus no post-processing is required for the recycled electrode. Furthermore, this work shows for the first time that a thermal regeneration method previously employed in catalyst systems can fully restore battery electrochemical performance, demonstrating a novel electrode recycling process which could open up new possibilities for energy storage devices with extended electrode lifecycles.

25 ENERGY STORAGE↗
DOE OSTI2016

Li/Ag 2 VO 2 PO 4 batteries: the roles of composite electrode constituents on electrochemistry

In this study, we utilize silver vanadium phosphorous oxide, Ag 2 VO 2 PO 4 , as a model system to systematically study the impact of the constituents of a composite electrode, including polymeric and conductive additives, on electrochemistry. Notably, although highly resistive, this bimetallic cathode can be discharged as a pure electroactive material in the absence of a conductive additive as it generates an in situ conductive matrix via a reduction displacement reaction resulting in the formation of silver metal nanoparticles. Also, three different electrode compositions were investigated: Ag 2 VO 2 PO 4 only, Ag 2 VO 2 PO 4 4 with binder, and Ag 2 VO 2 PO 4 with binder and carbon. Constant current discharge, pulse testing and impedance spectroscopy measurements were used to characterize the electrochemical properties of the electrodes as a function of depth of discharge. In situ EDXRD was used to spatially resolve the discharge progression within the cathode by following the formation of Ag 0 . Ex situ XRD and EXAFS modeling were used to quantify the amount of Ag 0 formed. Results indicate that the metal center reduced (V 5+ or Ag + ) was highly dependent on composite composition (presence of PTFE, carbon), depth of discharge (Ag 0 nanoparticle formation), and spatial location within the cathode. The addition of a binder was found to increase cell polarization, and the percolation network provided by the carbon in the presence of PTFE was further increased with reduction and formation of Ag 0 . Lastly, this study provides insight into the factors controlling the electrochemistry of resistive active materials in composite electrodes.

25 ENERGY STORAGE↗
DOE OSTI2017

Advances in electrode materials for Li-based rechargeable batteries

Rechargeable lithium-ion batteries store energy as chemical energy in electrode materials during charge and can convert the chemical energy into electrical energy when needed. Tremendous attention has been paid to screen electroactive materials, to evaluate their structural integrity and cycling reversibility, and to improve the performance of electrode materials. This review discusses recent advances in performance enhancement of both anode and cathode through nanoengineering active materials and applying surface coatings, in order to effectively deal with the challenges such as large volume variation, instable interface, limited cyclability and rate capability. We also introduce and discuss briefly the diversity and new tendencies in finding alternative lithium storage materials, safe operation enabled in aqueous electrolytes, and configuring novel symmetric electrodes and lithium-based flow batteries.

25 ENERGY STORAGE↗
DOE OSTI2017

A three-dimensional hierarchical structure of cyclized-PAN/Si/Ni for mechanically stable silicon anodes

Here, the main challenges associated with silicon anodes are their poor conductivity and severe structural degradation during cycling. Here we design a three-dimensional sandwich hierarchical structure that tackles these problems, and we demonstrate its use in flexible, large-area silicon anode assemblies. The design of the electrode is achieved via plasma enhanced chemical vapor deposition of silicon nanoparticles onto three-dimensional nickel foam followed by conformal coating of cyclized-PAN on the silicon surface, thus forming a sandwiched cyclized-PAN/Si/Ni hierarchical structure. The three-dimensional networks provide abundant electroactive zones and conductive transport paths, the conformal coating of cyclized-PAN accommodates volume change during cycling, and the monolithic electrode configuration without additional binders or conductive agents improves the energy density of the whole electrode. Furthermore, as a result of the sandwich hierarchical arrangement, the solid-electrolyte interface of the anode remains stable and spatially confined, leading to an increased reversible capacity and improved cycling stability (910 mA h g –1 after 100 cycles at 1.0 A g –1 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Probing charge transfer characteristics in a donor–acceptor metal–organic framework by Raman spectroelectrochemistry and pressure-dependence studies

The stimuli responsive behaviour of charge transfer donor–acceptor metal–organic frameworks (MOFs) remains an understudied phenomenon which may have applications in tuneable electronic materials. We now report the modification of donor–acceptor charge transfer characteristics in a semiconducting tetrathiafulvalene–naphthalene diimide-based MOF under applied electrochemical bias and pressure. Here, we employ a facile solid state in situ Raman spectroelectrochemical technique, applied for the first time in the characterisation of electroactive MOFs, to monitor the formation of a new complex TTFTC˙+–DPNI from a largely neutral system, upon electrochemical oxidation of the framework. In situ pressure-dependent Raman spectroscopy and powder X-ray diffraction experiments performed in a diamond anvil cell revealed blue shifts in the donor and acceptor vibrational modes in addition to contractions in the unit cell which are indicative of bond shortening. This study demonstrates the utility of in situ Raman spectroscopic techniques in the characterisation of redox-active MOFs and the elucidation of their electronic behaviours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A higher voltage Fe( II ) bipyridine complex for non-aqueous redox flow batteries

Non-aqueous redox flow batteries (RFBs) offer the possibility of higher voltage and a wider working temperature range than their aqueous counterpart. In this study, we optimize the established 2.26 V Fe(bpy) 3 (BF 4 ) 2 /Ni(bpy) 3 (BF 4 ) 2 asymmetric RFB to lessen capacity fade and improve energy efficiency over 20 cycles. We also prepared a family of substituted Fe(bpyR) 3 (BF 4 ) 2 complexes (R = –CF 3 , –CO 2 Me, –Br, –H, – t Bu, –Me, –OMe, –NH 2 ) to potentially achieve a higher voltage RFB by systematically tuning the redox potential of Fe(bpyR) 3 (BF 4 ) 2 , from 0.94 V vs. Ag/AgCl for R = OMe to 1.65 V vs. Ag/AgCl for R = CF 3 (ΔV = 0.7 V). A series of electronically diverse symmetric and asymmetric RFBs were compared and contrasted to study electroactive species stability and efficiency, in which the unsubstituted Fe(bpy) 3 (BF 4 ) 2 exhibited the highest stability as a catholyte in both symmetric and asymmetric cells with voltage and coulombic efficiencies of 94.0% and 96.5%, and 90.7% and 80.7%, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effects of bubbles on the electrochemical behavior of hydrogen-evolving Si microwire arrays oriented against gravity

The size-distribution, coverage, electrochemical impedance, and mass-transport properties of H 2 gas-bubble films were measured for both planar and microwire-array platinized n + -Si cathodes performing the hydrogen-evolution reaction in 0.50 M H 2 SO 4 (aq). Inverted, planar n + -Si/Ti/Pt cathodes produced large, stationary bubbles which contributed to substantial increases in ohmic potential drops. In contrast, regardless of orientation, microwire array n + -Si/Ti/Pt cathodes exhibited a smaller layer of bubbles on the surface, and the formation of bubbles did not substantially increase the steady-state overpotential for H 2 (g) production. Experiments using an electroactive tracer species indicated that even when oriented against gravity, bubbles enhanced mass transport at the electrode surface. Microconvection due to growing and coalescing bubbles dominated effects due to macroconvection of gliding bubbles on Si microwire array cathodes. Electrodes that maintained a large number of small bubbles on the surface simultaneously exhibited low concentrations of dissolved hydrogen and small ohmic potential drops, thus exhibiting the lowest steady-state overpotentials. The results indicate that microstructured electrodes can operate acceptably for unassisted solar-driven water splitting in the absence of external convection and can function regardless of the orientation of the electrode with respect to the gravitational force vector.

25 ENERGY STORAGE↗
DOE OSTI2020

The critical role of configurational flexibility in facilitating reversible reactive metal deposition from borohydride solutions

Development of calcium metal batteries has been historically frustrated by a lack of electrolytes capable of supporting reversible calcium electrodeposition. In this paper, we report the study of an electrolyte consisting of Ca(BH 4 ) 2 in tetrahydrofuran (THF) to gain important insight into the role of the liquid solvation environment in facilitating the reversible electrodeposition of this highly reactive, divalent metal. Through interrogation of the Ca 2+ solvation environment and comparison with Mg 2+ analogs, we show that an ability to reversibly electrodeposit metal at reasonable rates is strongly regulated by dication charge density and polarizability. Our results indicate that the greater polarizability of Ca 2+ over Mg 2+ confers greater configurational flexibility, enabling ionic cluster formation via neutral multimer intermediates. Increased concentration of the proposed electroactive species, CaBH 4 + , enables rapid and stable delivery of Ca 2+ to the electrode interface. Finally, this work helps set the stage for future progress in the development of electrolytes for calcium and other divalent metal batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗