Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXPLOSIVE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Extinction Imaging Diagnostics for In Situ Quantification of Soot within Explosively Generated Fireballs

Fireballs produced from the detonation of high explosives often contain particulates primarily composed of various phases of carbon soot. The transport and concentration of these particulates is of interest for model validation and emission characterization. Here, this work proposes ultra-high-speed imaging techniques to observe a fireball's structure and optical depth. An extinction-based diagnostic applied at two wavelengths indicates that extinction scales inversely with wavelength, consistent with particles in the Rayleigh limit and dimensionless extinction coefficients which are independent of wavelength. Within current confidence bounds, the extinction-derived soot mass concentrations agree with expectations based upon literature reported soot yields. Results also identify areas of high uncertainty where additional work is recommended.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Effect of thermal conditioning on the initiation threshold of secondary high‐explosives

While most performance metrics of high–explosive (HE) based devices like detonation velocity, detonation pressure, and energy output are expected to degrade over time, the evolution of initiation threshold appears less clear, with claims of both increasing and decreasing trends in threshold having been made in the literature. This work analyzes D–optimally designed sequential binary test data for a few thermally conditioned porous–powder and polymer–bonded HE initiator systems using a Bayesian likelihood method employing the probit regression model. Here we find that in most cases the initiation threshold decreases (i.e., sensitivity increases) upon accelerated thermal conditioning. However, such results are nuanced and influenced by factors like the contact area of initiating stimulus, HE characteristics like density and specific surface area, as well as possible thermally induced changes to other materials and interfaces involved.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Investigation of thermal damage in explosive bridgewire detonators via discrete element method simulations

Exploding bridgewire (EBW) detonators are used to rapidly and reliably initiate energetic reactions by exploding a bridgewire via Joule heating. While the mechanisms of EBW detonators have been studied extensively in nominal conditions, comparatively few studies have addressed thermally damaged detonator operability. We present a mesoscale simulation study of thermal damage in a representative EBW detonator, using discrete element method (DEM) simulations that explicitly account for individual particles in the pressed explosive powder. We use a simplified model of melting, where solid spherical particles undergo uniform shrinking, and fluid dynamics are ignored. The subsequent settling of particles results in the formation of a gap between the solid powder and the bridgewire, which we study under different conditions. In particular, particle cohesion has a significant effect on gap formation and settling behavior, where sufficiently high cohesion leads to coalescence of particles into a free-standing pellet. This behavior is qualitatively compared to experimental visualization data, and simulations are shown to capture several key changes in pellet shape. We derive a minimum and maximum limit on gap formation during melting using simple geometric arguments. In the absence of cohesion, results agree with the maximum gap size. With increasing cohesion, the gap size decreases, eventually saturating at the minimum limit. In conclusion, we present results for different combinations of interparticle cohesion and detonator orientations with respect to gravity, demonstrating the complex behavior of these systems and the potential for DEM simulations to capture a range of scenarios.

cohesive powders↗
DOE OSTI2022

Implications of Underground Nuclear Explosion Cavity Evolution for Radioxenon Isotopic Composition

Abstract Isotopic ratios of radioxenons sampled in the atmosphere or subsurface can be used to verify the occurrence of an underground nuclear explosion (UNE). Differences in the half-lives of radioactive xenon precursors and their decay-chain networks produce different time-dependent concentration profiles of xenon isotopes allowing isotopic ratios to be used for tracking UNE histories including estimating the time of detonation. In this study, we explore the potential effects of post-detonation cavity processes: precipitation of iodine precursors, gas seepage, and prompt venting on radioxenon isotopic evolution which influences UNE histories. Simplified analytical models and closed-form solutions yielding a potentially idealized radioactive decay/ingrowth chain in a closed and well-mixed system typically have limited application by not including the partitioning of the radionuclide inventory between a gas phase and rock melt created by the detonation and by ignoring gas transport from the cavity to host rock or ground surface. In reality, either subsurface transport or prompt release that is principally responsible for gas signatures violates the closed-system (or batch-mode) assumption. A closed-form solution representing time-dependent source-term activities is extended by considering the cavity partitioning process, slow seepage, and/or prompt release of gases from the cavity and applied to realistic systems.

Sun, Yunwei (ORCID:0000000194801439)↗
DOE OSTI2023

Impact of environmental backgrounds on atmospheric monitoring of nuclear explosions

Radionuclide monitoring for nuclear explosions includes measuring radioactive aerosol and noble gas concentrations in the atmosphere. The International Monitoring System (IMS) of the Comprehensive Nuclear Test Ban Treaty (CTBT) has made such measurements for decades, revealing much about how atmospheric radioactivity impacts the sensitivity of the network. For example, civilian emissions of radioiodine make a substantial regional impact, but a minor global impact, while civilian radioxenon emissions create major regional and complex global impacts. This example statement is strongly influenced by the minimum signal level anticipated to be interesting. The original design of the IMS anticipated relatively large signal levels, and the accomplished IMS network substantially meets or exceeds the sensitivity needed to detect those signal levels. Much lower signal levels can be motivated, which could require reconsideration of station sensitivity. Using measured and simulated background concentrations, various possible desired signal levels, and an innovative anomaly threshold, maps of sensitivity and a station ranking are developed for current and future stations. These provide a strong motivation for additional experimentation to learn about sources and the potential plusses of new technology.

Eslinger, Paul W.↗
DOE OSTI2024

Modification of Jet Velocities in an Explosively Loaded Copper Target with a Conical Cavity

Here, in this work, the design and execution of an experiment with the goal of demonstrating control over the evolution of a copper jet is described. Simulations show that when using simple multi-material buffers placed between a copper target with a conical cavity and a cylinder of high-explosive, a variety of jetting behaviors occur based on material placement, including both jet velocity augmentation and mitigation. A parameter sweep was performed to determine optimal buffer designs in two configurations. Experiments using the optimal buffer designs verified the effectiveness of the buffers at altering jet velocities. Similar trends were shown between the experimental results and the modeling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Severity factor kinetic model as a strategic parameter of hydrothermal processing (steam explosion and liquid hot water) for biomass fractionation under biorefinery concept

Hydrothermal processes are an attractive clean technology and cost-effective engineering platform for bio-refineries based in the conversion of biomass to biofuels and high-value bioproducts under the basis of sustainability and circular bioeconomy. The deep and detailed knowledge of the structural changes by the severity of biomasses hydrothermal fractionation is scientifically and technological needed in order to improve processes effectiveness, reactors designs, and industrial application of the multi-scale target compounds obtained by stream explosion and liquid hot water systems. The concept of the severity factor [log 10 (R 0 )] established > 30 years ago, continue to be a useful index that can provide a simple description of the relationship between the operational conditions for biomass fractionation in second generation of biorefineries. Furthermore, this review develops a deep explanation of the hydrothermal severity factor based in lignocellulosic biomass fractionation with emphasis in research advances, pretreatment operations and the applications of severity factor kinetic model.

09 BIOMASS FUELS↗
DOE OSTI2022

Enhancing methane production of anaerobic digested sewage sludge by advanced wet oxidation & steam explosion pretreatment

Anaerobic digestion (AD) of sewage sludge is associated with lowered carbon conversion efficiency due to the recalcitrance of microbial cells in the Waste Activated Sludge (WAS) from the aeration basins with 50 % of the dry weight still being present after AD. The effect of Advanced Wet Oxidation & Steam Explosion (AWOEx) pretreatment on the methane yield at variable temperatures (165–200 °C), residence time (15–45 min) and oxygen dosage (1%–10% based on VS concentration) was tested in this study. Central composite design (JMP® Pro) was used to design 19 runs of AWOEx pretreatment of dewatered digested sewage sludge (DADSS) at different operating conditions. After pretreatment the DADSS was fed to 19 bioreactors operated in semi-continues mode at 37 °C. The highest average methane yields of 183 mL/g VS and 170 mL/g VS were found for the bioreactors receiving DADSS pretreated at 165 °C with a retention time of 15 min and 10 % O2 (Condition 1), and, 182.5 °C with a retention time of 15 min and 5.5 % O2 (Condition 2). This corresponds to an increase in the methane production of 156.2 % and 140.5 % compared to the methane production from the DADSS without pretreatment.

09 BIOMASS FUELS↗
DOE OSTI2021

3D optical diagnostics for explosively driven deformation and fragmentation

High-speed, optical imaging diagnostics are presented for three-dimensional (3D) quantification of explosively driven metal fragmentation. At early times after detonation, Digital Image Correlation (DIC) provides non-contact measures of 3D case velocities, strains, and strain rates, while a proposed stereo imaging configuration quantifies in-flight fragment masses and velocities at later times. Experiments are performed using commercially obtained RP-80 detonators from Teledyne RISI, which are shown to create a reproducible fragment field at the benchtop scale. DIC measurements are compared with 3D simulations, which have been ‘leveled’ to match the spatial resolution of DIC. Overall, results demonstrate improved ability to identify predicted quantities-of-interest that fall outside of measurement uncertainty and shot-to-shot variability. Similarly, video measures of fragment trajectories and masses allow rapid experimental repetition and provide correlated fragment size-velocity measurements. Measured and simulated fragment mass distributions are shown to agree within confidence bounds, while some statistically meaningful differences are observed between the measured and predicted conditionally averaged fragment velocities. Together these techniques demonstrate new opportunities to improve future model validation.

42 ENGINEERING↗
DOE OSTI2021

Measurements of Argon-39 from locations near historic underground nuclear explosions

Measurement of radioactive gas seepage from an underground nuclear explosion is one of the primary methods to confirm whether an event was nuclear in nature. Radioactive noble gas indicators that are commonly targeted by such measurements (e.g. 133Xe, 37Ar) have half-lives of 35 days or less. Argon-39, an activation product similar to 37Ar, is produced by the interaction between neutrons and potassium in the surrounding geology and has a half-life of 269 years. Measurements taken at three sites near three historic underground nuclear test locations at the Nevada National Security Site have all shown highly elevated levels of 39Ar in subsurface air decades after the test events. Elevated levels of 39Ar (30-50 times background) were also detected in atmospheric air collected roughly 30 cm above ground level near two of these sites, and outside the entrance of the one tunnel site. These measurements demonstrate that 39Ar has the potential to be a long-term signature of an underground nuclear event which can be reliably detected at the surface or in the shallow subsurface. This radionuclide detection of an underground nuclear event decades after the event takes place is in contrast to the commonly held assumption that detecting underground nuclear events via radionuclides at the surface needs to be done in a matter of months. Depending upon what further studies show about the robustness of this signature in a variety of geological settings, it may in fact be easy to detect underground nuclear events at the surface for a very long time post-detonation.

Johnson, Christine M.↗
DOE OSTI2022

The behavior of antioxidant irganox 1010 during the thermal degradation of a plastic bonded explosive

The effect of water concentration on the aging behavior of blend components in plastic bonded explosive (PBX) 9501 is investigated when samples were aged up to 24 months under various conditions. Additionally, the blend components studied here are: poly(urethane ester) (Estane®5703) (Estane), nitroplasticizer (NP), and antioxidant Irganox 1010 (Irg1010). The experimental results reveal that NP is prone to thermally degrading and producing H 2 O, NO x , and HNO x species, which are the predominant species to consume Irg1010 during PBX 9501 aging under inert environment. As Irg1010 is completely consumed, Estane degrades through oxidation and NP addition, in addition to well anticipated hydrolysis. The competition among hydrolysis, oxidation, and NP addition results in non-monotonical changes in the molecular weight of Estane over the aging process.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atom Equivalent Energies for the Rapid Estimation of the Heat of Formation of Explosive Molecules from Density Functional Tight Binding Theory

Atom equivalent energies have been derived from which the gas-phase heat of formation of explosive molecules can be estimated from fast, semiempirical density functional tight binding total energy calculations. The root-mean-square deviation and maximum deviation of the heats of formation from the experimental values for the set of 45 energetic molecules compiled by Byrd and Rice [ J. Phys. Chem. A, 2006, 110, 1005–1013] are 10.4 and 25.5 kcal/mol, respectively, using 4 atom equivalent energies and 7.4 and 15.0 kcal/mol, respectively, using 7 atom equivalent energies. These errors are around a factor of 2–3 larger than those obtained from density functional theory calculations but are smaller than those obtained from other semiempirical electronic structure methods. Heats of formation calculated with density functional tight binding theory using the 4 and 7 atom equivalent energies, the Byrd and Rice scheme, and the atom pair contribution method for a new set of 531 energetic molecules that contain only carbon, hydrogen, nitrogen, and oxygen are provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Predicted Reaction Mechanisms, Product Speciation, Kinetics, and Detonation Properties of the Insensitive Explosive 2,6-Diamino-3,5-dinitropyrazine-1-oxide (LLM-105)

2,6-Diamino-3,5-dinitropyrazine-1-oxide (LLM-105) is a relatively new and promising insensitive high-explosive (IHE) material that remains only partially characterized. IHEs are of interest for a range of applications and from a fundamental science standpoint, as the root causes behind insensitivity are poorly understood. In this work, we adopt a multitheory approach based on reactive molecular dynamic simulations performed with density functional theory, density functional tight-binding, and reactive force fields to characterize the reaction pathways, product speciation, reaction kinetics, and detonation performance of LLM-105. We compare and contrast these predictions to 1,3,5-triamino-2,4,6-trinitrobenzene (TATB), a prototypical IHE, and 1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (HMX), a more sensitive and higher performance material. The combination of different predictive models allows access to processes operative on progressively longer timescales while providing benchmarks for assessing uncertainties in the predictions. We find that the early reaction pathways of LLM-105 decomposition are extremely similar to TATB; they involve intra- and intermolecular hydrogen transfer. Additionally, the detonation performance of LLM-105 falls between that of TATB and HMX. We find agreement between predictive models for first-step reaction pathways but significant differences in final product formations. Predictions of detonation performance result in a wide range of values, and one-step kinetic parameters show the similar reaction rates at high temperatures for three out of four models considered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Scale Invariance of Hot Spot Formation in TATB High Explosives

Shock-induced detonation of insensitive high explosives based on 1,3,5-triamino-2,4,6-trinitrobenzene starts with formation of hot spots at microstructural defects but has eluded atomistic modeling treatment at micron length scales. To this end, we performed multimicron scale all-atom molecular dynamics (MD) simulations of hot spots that form during the collapse of cylindrical pores with diameters between 10 and 300 nm. Our MD simulations show that hot spots formed at pores larger than 20 nm exhibit temperature fields with scale-invariant features for sizes up to at least 300 nm. Through a continuum-based grain-scale modeling framework, we span and extend beyond the size scales currently accessible to MD and find that hot spot scale invariance is a general feature that arises when the mechanical strength is insensitive to strain rate. Finally, our results demonstrate the applicability of all-atom MD to simulate the complicated dynamical evolution of micron-sized systems and bolster confidence in insights from MD simulations of materials that exhibit strength with negligible rate dependence over the relevant intervals.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Modeling Framework to Predict Melting Dynamics at Microstructural Defects in TNT-HMX High Explosive Composites

Many high explosive (HE) formulations are composite materials whose microstructure is understood to impact functional characteristics. Interfaces are known to mediate the formation of hot spots that control their safety and initiation. Here, to study such processes at molecular scales, we developed all-atom force fields (FFs) for Octol, a prototypical HE formulation comprised of TNT (2,4,6-trinitrotoluene) and HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine). We extended a FF for TNT and recasted it in a form that can be readily combined with a well-established FF for HMX. The resulting FF was extensively validated against experimental results and density functional theory calculations. We applied the new combined TNT-HMX FF to predict and rank surface and interface energies, which indicate that there is an energetic driver for coarsening of microstructural grains in TNT-HMX composites. Finally, we assess the impact of several microstructural environments on the dynamic melting of TNT crystal under ultrafast thermal loading. We find that both free surfaces and planar material interfaces are effective nucleation points for TNT melting. However, MD simulations show that TNT crystal is prone to superheating by at least 50 K on subnanosecond time scales and that the degree of superheating is inversely correlated with surface and interface energy. The modeling framework presented here will enable future studies on hot spot formation processes in accident scenarios that are governed by strong coupling between microstructural interfaces, material mechanics, momentum and energy transport, phase transitions, and chemistry.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Differentiating and Quantifying Gas-Phase Conformational Isomers Using Coulomb Explosion Imaging

Conformational isomerism plays a crucial role in defining the physical and chemical properties and biological activity of molecules ranging from simple organic compounds to complex biopolymers. However, it is often a significant challenge to differentiate and separate these isomers experimentally as they can easily interconvert due to their low rotational energy barrier. Here, we use the momentum correlation of fragment ions produced after inner-shell photoionization to distinguish conformational isomers of 1,2-dibromoethane (C 2 H 4 Br 2 ). We demonstrate that the three-body breakup channel, C 2 H 4 + + Br + + Br + , contains signatures of both sequential and concerted breakup, which are decoupled to distinguish the geometries of two conformational isomers and to quantify their relative abundance. The sensitivity of our method to quantify these yields is established by measuring the relative abundance change with sample temperature, which agrees well with calculations. Finally, our study paves the way for using Coulomb explosion imaging to track subtle molecular structural changes.

Photoionization↗
DOE OSTI2021

Investigating Vegetation Responses to Underground Nuclear Explosions Through Integrated Analyses

Vegetation has the potential to respond to underground nuclear explosions, yet these links have not been fully explored. Given the lack of previously described signatures, the changes in vegetation are possibly subtle. The integration of multiple different data streams is potentially a useful approach to improve signal detection. Here, we investigate whether semi-arid vegetation growth patterns responded to eight legacy underground nuclear tests at the Nevada National Security Site in southern Nevada, USA. We tested for spatial and temporal changes in vegetation cover, tree growth patterns, and tree leaf spectral properties using ground-based measurements, including those from tree-rings and hyperspectral surface vegetation reflectance, as well as space-based measurements of Normalized Difference Vegetation Index (NDVI) from Landsat. Multiple data streams suggest a localized (<1.2 km) spatial pattern whereby tree growth is enhanced closer to the source of the underground test relative to sites further away. We also observed a more regional (>1.2–9 km) pattern whereby tree growth is suppressed coincident with a drought beginning 1 year before the 1989 tests, but continuing in the 5 years following the tests, which is anomalous relative to what is expected based on the response of tree growth to previous droughts. furthermore, quantification of the relative effects of the tests on vegetation remains a challenge due to the coincident drought and the potential for other disturbances to have impacted tree growth at this time, but the integration of these data reveals a more nuanced growth response than any other one data set indicates alone.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2021

Astrophysical Explosions Revisited: Collisionless Coupling of Debris to Magnetized Plasma

The coupling between a rapidly expanding cloud of ionized debris and an ambient magnetized plasma is revisited with a hybrid (kinetic ion/fluid electron) simulation code that allows a study over a wide range of plasma parameters. Over a specified range of hypothetical conditions, simple scaling laws in terms of the total debris mass and explosion speed are derived and verified for the maximal size of the debris cloud and the fraction of debris that free-streams from the burst along the magnetic field. Furthermore, the amount of debris that escapes from the burst with minimal coupling to the background magnetic field increases with the debris gyroradius. Test cases with two different debris species—including a heavy minority species with a relatively large gyroradius—highlight how the collisionless coupling of the debris depends on the single particle trajectories as well as the overall conservation of energy and momentum.

79 ASTRONOMY AND ASTROPHYSICS↗