Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXCEPTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Simultaneous Enhancement of Efficiency And Operational-Stability of Mesoscopic Perovskite Solar Cells via Interfacial Toughening

The combined effects of compact TiO 2 (c-TiO 2 ) electron-transport layer (ETL) are investigated without and with mesoscopic TiO 2 (m-TiO 2 ) on top, and without and with an iodine-terminated silane self-assembled monolayer (SAM), on the mechanical behavior, opto–electronic properties, photovoltaic (PV) performance, and operational-stability of solar cells based on metal-halide perovskites (MHPs). The interfacial toughness increases almost threefold in going from c-TiO 2 without SAM to m-TiO 2 with SAM. This is attributed to the synergistic effect of the m-TiO 2 /MHP nanocomposite at the interface and the enhanced adhesion afforded by the iodine-terminated silane SAM. The combination of m-TiO 2 and SAM also offers a significant beneficial effect on the photocarriers extraction at the ETL/MHP interface, resulting in perovskite solar cells (PSCs) with power-conversion efficiency (PCE) of over 24% and 20% for 0.1 and 1 cm 2 active areas, respectively. These PSCs also have exceptionally long operational stability lives extrapolated T80 (duration at 80% initial PCE retained) is ≈18 000 and 10 000 h for 0.1 and 1 cm 2 active areas, respectively. In conclusion, postmortem characterization and analyses of the operational-stability-tested PSCs are performed to elucidate the possible mechanisms responsible for the long operational-stability.

14 SOLAR ENERGY↗
DOE OSTI2024

A Catalyst-Like System Enables Efficient Perovskite Solar Cells

High-quality perovskite films are essential for achieving high performance of optoelectronic devices; However, solution-processed perovskite films are known to suffer from compositional and structural inhomogeneity due to lack of systematic control over the kinetics during the formation. Here, in this work, the microscopic homogeneity of perovskite films is successfully enhanced by modulating the conversion reaction kinetics using a catalyst-like system generated by a foaming agent. The chemical and structural evolution during this catalytic conversion is revealed by a multimodal synchrotron toolkit with spatial resolutions spanning many length scales. Combining these insights with computational investigations, a cyclic conversion pathway model is developed that yields exceptional perovskite homogeneity due to enhanced conversion, having a power conversion efficiency of 24.51% for photovoltaic devices. This work establishes a systematic link between processing of precursor and homogeneity of the perovskite films.

14 SOLAR ENERGY↗
DOE OSTI2024

Harnessing High‐Throughput Computational Methods to Accelerate the Discovery of Optimal Proton Conductors for High‐Performance and Durable Protonic Ceramic Electrochemical Cells

Abstract The pursuit of high‐performance and long‐lasting protonic ceramic electrochemical cells (PCECs) is impeded by the lack of efficient and enduring proton conductors. Conventional research approaches, predominantly based on a trial‐and‐error methodology, have proven to be demanding of resources and time‐consuming. Here, this work reports the findings in harnessing high‐throughput computational methods to expedite the discovery of optimal electrolytes for PCECs. This work methodically computes the oxygen vacancy formation energy (E V ), hydration energy (E H ), and the adsorption energies of H 2 O and CO 2 for a set of 932 oxide candidates. Notably, these findings highlight BaSn x Ce 0.8‐x Yb 0.2 O 3‐δ (BSCYb) as a prospective game‐changing contender, displaying superior proton conductivity and chemical resilience when compared to the well‐regarded BaZr x Ce 0.8‐x Y 0.1 Yb 0.1 O 3‐δ (BZCYYb) series. Experimental validations substantiate the computational predictions; PCECs incorporating BSCYb as the electrolyte achieved extraordinary peak power densities in the fuel cell mode (0.52 and 1.57 W cm −2 at 450 and 600 °C, respectively), a current density of 2.62 A cm −2 at 1.3 V and 600 °C in the electrolysis mode while demonstrating exceptional durability for over 1000‐h when exposed to 50% H 2 O. This research underscores the transformative potential of high‐throughput computational techniques in advancing the field of proton‐conducting oxides for sustainable power generation and hydrogen production.

08 HYDROGEN↗
DOE OSTI2024

A Fluoride-Rich Solid-Like Electrolyte Stabilizing Lithium Metal Batteries

To address the problems associated with Li metal anodes, a fluoride-rich solid-like electrolyte (SLE) that combines the benefits of solid-state and liquid electrolytes is presented. Its unique triflate-group-enhanced frame channels facilitate the formation of a functional inorganic-rich solid electrolyte interphase (SEI), which not only improves the reversibility and interfacial charge transfer of Li anodes but also ensures uniform and compact Li deposition. Furthermore, these triflate groups contribute to the decoupling of Li + and provide hopping sites for rapid Li + transport, enabling a high room-temperature ionic conductivity of 1.1 mS cm -1 and a low activation energy of 0.17 eV, making it comparable to conventional liquid electrolytes. Consequently, Li symmetric cells using such SLE achieve extremely stable plating/stripping cycling over 3500 h at 0.5 mA cm -2 and support a high critical current up to 2 mA cm -2 . Here, the assembled Li||LiFePO 4 solid-like batteries exhibit exceptional cyclability for over 1 year and a half, even outperforming liquid cells. Additionally, high-voltage cylindrical cells and high-capacity pouch cells are demonstrated, corroborating much simpler processibility in battery assembly compared to all-solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Coexistence and Interplay of Two Ferroelectric Mechanisms in Zn 1-x Mg x O

Ferroelectric materials promise exceptional attributes including low power dissipation, fast operational speeds, enhanced endurance, and superior retention to revolutionize information technology. However, the practical application of ferroelectric-semiconductor memory devices has been significantly challenged by the incompatibility of traditional perovskite oxide ferroelectrics with metal-oxide-semiconductor technology. Recent discoveries of ferroelectricity in binary oxides such as Zn 1-x Mg x O and Hf 1-x Zr x O have been a focal point of research in ferroelectric information technology. Here, this work investigates the ferroelectric properties of Zn 1-x Mg x O utilizing automated band excitation piezoresponse force microscopy. This findings reveal the coexistence of two ferroelectric subsystems within Zn 1-x Mg x O. A “fringing-ridge mechanism” of polarization switching is proposed that is characterized by initial lateral expansion of nucleation without significant propagation in depth, contradicting the conventional domain growth process observed in ferroelectrics. This unique polarization dynamics in Zn 1-x Mg x O suggests a new understanding of ferroelectric behavior, contributing to both the fundamental science of ferroelectrics and their application in information technology.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mechanochemically Robust LiCoO 2 with Ultrahigh Capacity and Prolonged Cyclability

Pushing intercalation-type cathode materials to their theoretical capacity often suffers from fragile Li-deficient frameworks and severe lattice strain, leading to mechanical failure issues within the crystal structure and fast capacity fading. This is particularly pronounced in layered oxide cathodes because the intrinsic nature of their structures is susceptible to structural degradation with excessive Li extraction, which remains unsolved yet despite attempts involving elemental doping and surface coating strategies. Herein, a mechanochemical strengthening strategy is developed through a gradient disordering structure to address these challenges and push the LiCoO 2 (LCO) layered cathode approaching the capacity limit (256 mAh g -1 , up to 93% of Li utilization). This innovative approach also demonstrates exceptional cyclability and rate capability, as validated in practical Ah-level pouch full cells, surpassing the current performance benchmarks. Comprehensive characterizations with multiscale X-ray, electron diffraction, and imaging techniques unveil that the gradient disordering structure notably diminishes the anisotropic lattice strain and exhibits high fatigue resistance, even under extreme delithiation states and harsh operating voltages. Consequently, this designed LCO cathode impedes the growth and propagation of particle cracks, and mitigates irreversible phase transitions. In conclusion, this work sheds light on promising directions toward next-generation high-energy-density battery materials through structural chemistry design.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Zirconium‐Based Metal–Organic Frameworks with Free Hydroxy Groups for Enhanced Perfluorooctanoic Acid Uptake in Water

Perfluorooctanoic acid (PFOA) is a highly recalcitrant organic pollutant, and its bioaccumulation severely endangers human health. While various methods are developed for PFOA removal, the targeted design of adsorbents with high efficiency and reusability remains largely unexplored. Here, in this work, the rational design and synthesis of two novel zirconium‐based metal‒organic frameworks (MOFs) bearing free ortho ‐hydroxy sites, namely noninterpenetrated PCN‐1001 and twofold interpenetrated PCN‐1002, are presented. Single crystal analysis of the pure ligand reveals that intramolecular hydrogen bonding plays a pivotal role in directing the formation of MOFs with free hydroxy groups. Furthermore, the transformation from PCN‐1001 to PCN‐1002 is realized. Compared to PCN‐1001, PCN‐1002 displays higher chemical stability due to interpenetration, thereby demonstrating an exceptional PFOA adsorption capacity of up to 632 mg g −1 (1.53 mmol g −1 ), which is comparable to the reported record values. Moreover, PCN‐1002 shows rapid kinetics, high selectivity, and long‐life cycles in PFOA removal tests. Solid‐state nuclear magnetic resonance results and density functional theory calculations reveal that multiple hydrogen bonds between the free ortho ‐hydroxy sites and PFOA, along with Lewis acid‐base interaction, work collaboratively to enhance PFOA adsorption.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Exciton Dynamics in Layered Halide Perovskite Light‐Emitting Diodes

Abstract Layered halide perovskites have garnered significant interest due to their exceptional optoelectronic properties and great promises in light‐emitting applications. Achieving high‐performance perovskite light‐emitting diodes (PeLEDs) requires a deep understanding of exciton dynamics in these materials. This review begins with a fundamental overview of the structural and photophysical properties of layered halide perovskites, then delves into the importance of dimensionality control and cascade energy transfer in quasi‐2D PeLEDs. In the second half of the review, more complex exciton dynamics, such as multiexciton processes and triplet exciton dynamics, from the perspective of LEDs are explored. Through this comprehensive review, an in‐depth understanding of the critical aspects of exciton dynamics in layered halide perovskites and their impacts on future research and technological advancements for layered halide PeLEDs is provided.

Baek, Sung‐Doo↗
DOE OSTI2025

Ultra‐Flexible Pixelated Perovskite Photodetectors Enabled by Honeycomb Polymer Grids for High‐Resolution Imaging

Abstract A nature‐inspired fabrication method based on a photolithography‐free flexible polymer grid is reported for high‐resolution pixelation of perovskite photodiode arrays with exceptional mechanical ductility and a morphology resembling that of natural compound eyes. The resulting pixelated perovskite photosensitive layer has a ≈1 µm pixel size with 2000 Pixels per inch (PPI) resolution when fully assembled as a photodetector array, delivering a detectivity of >10 13 Jones while providing cross‐talk free imaging. Using a polymer grid effectively releases stress on the perovskite platform, greatly increasing the mechanical agility of the otherwise brittle perovskite film. This novel fabrication methodology and device design offer new possibilities for applications in robotics, biomedical imaging, and virtual and augmented reality.

Zheng, Ding [Department of Chemistry and the Mater↗
DOE OSTI2025

Rational Design of Methylated Triazine‐Based Linear Conjugated Polymers for Efficient CO 2 Photoreduction with Water

The development of semiconducting conjugated polymers for photoredox catalysis holds great promise for sustainable utilization of solar energy. In this work, a new family of porous methylated triazine‐based linear conjugated polymers is reported that enable efficient photoreduction of carbon dioxide (CO 2 ) with water (H 2 O) vapor, in the absence of any additional photosensitizer, sacrificial agents or cocatalysts. It is demonstrated that the key lies in the generation of methylated triazine linkages through a facile condensation reaction between benzamidine and acetic anhydride, which impedes the formation of conventional triazine‐based frameworks. It is also shown that regulating conjugated linear backbones with different lengths of electron‐donated benzyl units provides a facile means to modulate their optical properties and the exciton dissociation, thereby affording more long‐lived photogenerated charge carriers and boosting charge separation and transfer. A high‐performance carbon monoxide (CO) production rate of 218.9 µmol g −1 h −1 is achieved with ≈ 100% CO selectivity, which is accompanied by exceptional H 2 O oxidation to oxygen (O 2 ). It anticipates this new study will advance synthetic approaches toward polymeric semiconductors and facilitate new possibilities for triazine‐based conjugated polymers with promising potential in artificial photocatalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Rational Regulation of Layer‐by‐Layer Processed Active Layer via Trimer‐Induced Pre‐Swelling Strategy for Efficient and Robust Thick‐Film Organic Solar Cells

Thick-film (>300 nm) organic solar cells (OSCs) have garnered intensifying attention due to their compatibility with commercial roll-to-roll printing technology for the large-scale continuous fabrication process. However, due to the uncontrollable donor/acceptor (D/A) arrangement in thick-film condition, the restricted exciton splitting and severe carrier traps significantly impede the photovoltaic performance and operability. For this work, combined with layer-by-layer deposition technology, a twisted 3D star-shaped trimer (BTT-Out) is synthesized to develop a trimer-induced pre-swelling (TIP) strategy, where the BTT-Out is incorporated into the buried D18 donor layer to enable the fabrication of thick-film OSCs. The integrated approach characterizations reveal that the exceptional configuration and spontaneous self-organization behavior of BTT-Out trimer could pre-swell the D18 network to facilitate the acceptor's infiltration and accelerate the formation of D/A interfaces. This enhancement triggers the elevated polarons formation with amplified hole-transfer kinetics, which is essential for the augmented exciton splitting efficiency. Furthermore, the regulated swelling process can initiate the favorable self-assembly of L8-BO acceptors, which would ameliorate carrier transport channels and mitigate carrier traps. As a result, the TIP-modified thin-film OSC devices achieve the champion performance of 20.3% (thin-film) and 18.8% (thick-film) with upgraded stability, among one of the highest performances reported of thick-film OSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Manipulating the Assembly and Architecture of Fibrillar Silk

Silk is a unique and exceptionally strong biological material. However, no synthetic method has yet come close to replicating the properties of natural silk. This shortfall is attributed to an insufficient understanding of both silk nanofibril structure and the mechanism of formation. Here in situ atomic force microscopy (AFM) and photo-induced force microscopy (PiFM) is utilized to investigate the formation process and define the basic structural paradigm of individual silk nanofibrils. By visualizing the multistage process of silk nanofibril formation, the importance of conformational transformations along the assembly pathway is revealed. Unfolded silk structures initially accumulate into amorphous clusters, which then evolve into crystal nuclei via conformational transformation into β-crystallites. Nanofibril elongation then occurs through the attachment of silk molecules at a single end of the nanofibril tip; this is facilitated through the formation of a new amorphous cluster that then repeats the aforementioned conformational transformation. However, enzymatic digestion of the amorphous regions leads to direct, rapid elongation of β-crystalline fibers. These findings imply that the energy landscape is characterized by shallow minima associated with intermediate states, which can be eliminated by introducing β-crystallites, and motivate research into the directed modification of the silk assembly pathway to select for features beneficial to specific applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Probing Cellular Activity Via Charge‐Sensitive Quantum Nanoprobes

Nitrogen‐vacancy (NV) based quantum sensors hold great potential for real‐time single‐cell sensing with far‐reaching applications in fundamental biology and medical diagnostics. Although highly sensitive, the mapping of quantum measurements onto cellular physiological states has remained an exceptional challenge. Here, we introduce a novel quantum sensing modality capable of detecting changes in cellular activity. Our approach is based on the detection of environment‐induced charge depletion within an individual particle that, owing to a previously unaccounted transverse dipole term, induces systematic shifts in the zero‐field splitting (ZFS). Importantly, these charge‐induced shifts serve as a reliable indicator for lipopolysaccharide (LPS)‐mediated inflammatory response in macrophages. Furthermore, we demonstrate that surface modification of our diamond nanoprobes effectively suppresses these environment‐induced ZFS shifts, providing an important tool for differentiating electrostatic shifts caused by the environment from other unrelated effects, such as temperature variations. Notably, this surface modification also leads to significant reductions in particle‐induced toxicity and inflammation. Our findings shed light on systematic drifts and sensitivity limits of NV spectroscopy in a biological environment with ramifications for the critical discussion surrounding single‐cell thermogenesis. Notably, this work establishes the foundation for a novel sensing modality capable of probing complex cellular processes through straightforward physical measurements.

band bending↗
DOE OSTI2025

Robust Oxygen‐Vacancy‐Engineered Co(OH) 2 /Cu Heterostructures Boost Nitrate Electroreduction to Ammonia beyond 2 A cm −2

Electrocatalytic nitrate reduction reaction (NO 3 RR) presents a sustainable paradigm for green NH 3 synthesis and NO 3 − wastewater valorization. However, overcoming sluggish NO 3 RR kinetics under industrial-current operation persists as a critical challenge. Herein, robust oxygen vacancy-enriched heterostructures (O v -Co(OH) 2 /Cu) are engineered through in situ electrochemical reconstruction. By coupling Cu-mediated NO 3 − -to-NO 2 − conversion with O v -Co(OH) 2 -accelerated NO 2 − -to-NH 3 transformation, this heterostructured system delivers an unprecedented NH 3 yield rate of 167.8 mg h −1 cm −2 and 97.7% Faradaic efficiency at >2 A cm −2 , while maintaining exceptional current tolerance over 25 h. Operando spectroscopic characterizations and theoretical calculations reveal that the introduction of O v in Co(OH) 2 synergistically accelerates water dissociation to ensure continuous hydrogen supply and optimizes *NOOH adsorption, reducing the energy barrier for the rate-limiting step (*NO 2 to *NOOH). To demonstrate practical viability, a membrane-electrode-assembly electrolyzer integrating NO 3 RR with glycerol oxidation reaction achieves highly effective co-production of NH 3 and formate alongside wastewater treatment. In conclusion, this work offers new insights into the rational design of electrocatalysts through in situ reconstruction-induced vacancy engineering for scalable and practical NO 3 RR applications.

ammonia synthesis↗
DOE OSTI2025

Tailoring the Reaction Heterogeneity for Robust Li‐Rich Cathodes

The practical application of Li-rich Mn-based layered oxides (LLO) cathode is hindered by severe capacity and voltage degradation resulting from severe oxygen release and irreversible phase transition. In this work, the reaction heterogeneity, which describes the spatially resolved electrochemical divergence within individual cathode particles, is engineered through compositional gradient design to couple Li + transport kinetics and the anion redox activity between particle interiors and surfaces. It is revealed that Co/Mn concentration gradient within particles creates heterogeneous phase content distribution and structural ordering, inducing surface-bulk reaction heterogeneity that significantly impacts the overall electrochemical performance. Specifically, Li 2 MnO 3 -poor and Co-enriched surface effectively mitigates the oxygen loss and enhances electrochemical reaction kinetics, benefited from the reduced surface redox reactivity and induced highly ordered intra-layered cationic arrangement. Meanwhile, the Li 2 MnO 3 -enriched core with slight Li/Ni intermixing provides high reversible capacity and strong mechanical stability. Consequently, the greatly enhanced anion redox reversibility, Li + diffusion dynamics, and structure stability endow LLO with exceptional electrochemical properties, showing a capacity retention of 86.0% and a reduced voltage decay of 0.518 mV per cycle after 500 cycles at 1 C. This work provides a valuable strategy to tailor the redox chemistry and achieve robust LLO.

25 ENERGY STORAGE↗
DOE OSTI2025

Multimaterial 3D Printing in Activating Bath Enables In Situ Polymerization of Thermosets with Intricate Geometries and Diverse Elastic Behaviors

Polydicyclopentadiene, p(DCPD), is a high‐performance thermoset valued for its exceptional toughness, strength, and stiffness. When copolymerized with 1,5‐cyclooctadiene (COD), its mechanical properties can be tuned from glassy to rubbery at room temperature. While frontal polymerization enables a rapid and energy‐efficient route to 3D print DCPD‐based materials, challenges such as ink shelf life and gravitational distortion, especially in direct ink writing of soft COD‐rich formulations, must be considered. Here, a complementary chemical strategy is presented, embedded 3D printing, that enables localized in situ polymerization of printed DCPD/COD inks within a reactive support matrix. The matrix provides both physical support and a reservoir of chemical activator, which diffuses into the ink, activates a latent bis(N‐heterocyclic carbene) Ru precatalyst, and initiates ring‐opening metathesis polymerization. Curing begins at the ink–matrix interface and propagates inward via diffusion, stabilizing the interface and preventing capillary‐driven deformation regardless of the matrix yield stress. This approach eliminates the need for cold storage, external curing, or photoinitiation, significantly expanding the processing window. Using this method, diverse thermosetting and elastomeric architectures are fabricated with features as small as 5 µm and aspect ratios of 100, including interlinked chains, shallow spherical shells exhibiting snap‐through buckling, and hair‐like fin arrays inaccessible through traditional techniques.

chemical activation↗
DOE OSTI2025

Proton Selective Nanoporous Atomically Thin Graphene Membranes for Vanadium Redox Flow Batteries

Angstrom-scale proton-selective pores in atomically thin 2D materials present fundamentally new opportunities for advancing proton exchange membranes (PEMs). Vanadium Redox Flow Batteries (VRFBs) for grid-scale energy storage require PEMs with high areal proton conductance (>1 S cm −2 ) and minimal vanadium ion (VO 2+ ) crossover. However, state-of-the-art Nafion 212 membranes (N212 ≈50 µm thick), suffer from persistent VO 2+ crossover reducing performance and efficiency. Here, a layered PEM is demonstrated, comprising monolayer CVD graphene with Angstrom-scale proton-selective pores introduced via Ar plasma, integrated with an ultra-thin ≈300 nm polybenzimidazole (PBI) layer and sandwiched between two Nafion 211 (25 µm thick) layers. The layered architecture facilitates scalable membrane fabrication by mitigating defects while processing and facile stacking of graphene layers allows stochastic non-selective defect isolation enabling exceptionally low VO 2+ crossover (selectivity (H + areal conductance / VO 2+ permeability) ≈6709 × 10 6 S min cm −4 ), with proton conductance >8 S cm −2 . Systematic transport experiments supported by resistance-based transport modelling elucidate the role of defect size, defect isolation, and sealing, as well as layering/stacking, to enable orders of magnitude (>671× over N212) improvements in selectivity, along with areal proton conductance >8 S cm −2 . This work highlights the potential of atomic-scale proton-selective defect engineering in 2D materials, in conjunction with facile stacking and layering of materials as strategies for scalable, high-performance advances in PEMs for energy, electrochemical, and separation applications beyond VRFBs.

Chaturvedi, Pavan [Vanderbilt Univ., Nashville, TN↗
DOE OSTI2025

Creating Favorable Pt/Co Interfaces via a Two‐Step Approach for Constructing Highly Durable PtCo Intermetallic Fuel Cell Catalysts

Structurally ordered PtCo intermetallics are one of the most promising oxygen-reduction catalysts in proton exchange membrane fuel cells (PEMFCs) due to their intrinsically improved catalytic activity and stability relative to PtCo solid-solution alloys. However, increasing the heating temperature to achieve a desirable high degree of ordering results in severe particle agglomeration and low mass activity and stability. Herein, a two-step synthesis approach is developed to create an L1 2 -Pt 3 Co intermetallic structure with an increased ordering degree and well-dispersed ultrafine particles. The first step of the synthesis yields ultrafine Pt nanoparticles that are well-dispersed on the ZIF-8-derived carbon support. The second adsorption step enables us to fine-tune the Pt and Co interfaces, assisted by optimal amino acids, to establish a favorable Co-rich environment around fine Pt nanoparticles, facilitating Co diffusion into the Pt crystalline under mild thermal conditions (<800 °C). In conclusion, this two-step ordered L1 2 -Pt 3 Co catalyst is systematically evaluated using membrane electrode assemblies under heavy-duty vehicle (HDV) conditions and demonstrated exceptional performance and durability, retaining 1.35 A cm -2 only a 7% loss in current density at 0.7 V after an extensive accelerated stress test of 150,000 voltage cycles.

30 DIRECT ENERGY CONVERSION↗