Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ERIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Changing the Mechanism for CO 2 Hydrogenation Using Solvent-Dependent Thermodynamics

A critical scientific challenge for utilization of CO2 is the development of catalyst systems that do not depend upon expensive or environmentally unfriendly reagents, such as precious metals, strong organic bases, and organic solvents. We have used thermodynamic insights to predict and demonstrate that the HCoI(dmpe)2 catalyst system, previously described for use in organic solvents, can hydrogenate CO2 to formate in water with bicarbonate as the only added reagent. Replacing tetrahydrofuran as the solvent with water changes the mechanism for catalysis by altering the thermodynamics for hydride transfer to CO2 from a key dihydride intermediate. The need for a strong organic base was eliminated by performing catalysis in water due to the change in mechanism. These studies demonstrate that the solvent plays a pivotal role in determining the reaction thermodynamics and thereby catalytic mechanism and activity. The research was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. Pacific Northwest National Laboratory is operated by Battelle for the U.S. Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bimetallic Ag-Pt Sub-nanometer Supported Clusters as Highly Efficient and Robust Oxidation Catalysts

A combined experimental and theoretical investigation of Ag-Pt sub-nanometer clusters as heterogeneous catalysts in the CO -> CO2 reaction (COox) is presented. Ag9Pt2 and Ag9Pt3 clusters are size-selected in the gas phase, deposited on an ultrathin amorphous alumina support, and tested as catalysts experimentally under realistic conditions and by first-principles simulations at realistic coverage. Insitu GISAXS/TPRx demonstrates that the clusters do not sinter or deactivate even after prolonged exposure to reactants at high temperature, and present comparable, extremely high COox catalytic efficiency. Such high activity and stability are ascribed to a synergic role of Ag and Pt in ultranano-aggregates, in which Pt anchors the clusters to the support and binds and activates two CO molecules, while Ag binds and activates O-2, and Ag/Pt surface proximity disfavors poisoning by CO or oxidized species.

Ab initio calculations↗

H 2 Oxidation Electrocatalysis Enabled by Metal-to-Metal Hydrogen Atom Transfer: A Homolytic Approach to a Heterolytic Reaction

Oxidation of H2 is used in the conversion of the chemical energy of the H-H bond into electricity. Electrocatalytic oxidation of H2 typically requires that one metal bind H2, heterolytically cleave the H2, and then undergo two oxidation and two deprotonation steps. We discovered that electrocatalytic oxidation of H2 is catalyzed by a cooperative system using Cp*Cr(CO)3H and [Fe(diphosphine)(CO)3]+. A key step of the proposed mechanism is a rarely observed metal-to-metal hydrogen atom transfer from the Cr-H complex to the Fe, forming a Fe-H bond that is deprotonated and then oxidized electrochemically. The “division of chemical labor” between Cr and Fe features a reaction of the Cr complex with H2, while the Fe complex reacts at the electrode. This cooperative catalysis system does not require that either metal heterolytically cleave H2, and thereby provides a very unusual example of a homolytic reaction being a key step in a molecular electrocatalytic process.

oxidation, electrocatalysis, hydrogen↗

Estimation of economic impacts of cellulosic biofuel production: a comparative analysis of three biofuel pathways: Economic impacts of biofuel production

The development of a cellulosic biofuel industry utilizing domestic biomass resources is expected to create opportunities for economic growth resulting from the construction and operation of new biorefineries. We applied an economic input-output model to estimate potential economic impacts, particularly gross job growth, resulting from the construction and operation of biorefineries using three different technology pathways: 1) cellulosic ethanol via biochemical conversion in Iowa, 2) renewable diesel blendstock via biological conversion in Georgia, and 3) renewable diesel and gasoline blendstock via fast pyrolysis in Mississippi. Combining direct, indirect, and induced effects, capital investment associated with the construction of a biorefinery processing 2,000 dry metric tons of biomass per day (DMT/day) could yield between 5,960 and 8,470 full-time equivalent (FTE) jobs during the construction period. Fast pyrolysis biorefineries produce the most jobs on a project level thanks to the highest capital requirement among the three pathways. Normalized for one million dollars of capital investment, the fast pyrolysis biorefineries are estimated to yield slighter more jobs (12.1 jobs) than the renewable diesel (11.8 jobs) and the cellulosic ethanol (11.6 jobs) biorefineries. While operating biorefineries is not labor-intensive, the annual operation of a 2,000 DMT/day biorefinery could support between 720 and 970 jobs when the direct, indirect, and induced effects are considered. The major factor, which results in the variations among the three pathways, is the type of biomass feedstock used for biofuels. The agriculture/forest, services, and trade industries are the primary sectors that will benefit from the ongoing operation of biorefineries.

Biofuels↗

Comparative techno-economic analysis and process design for indirect liquefaction pathways to distillate-range fuels via biomass-derived oxygenated intermediates upgrading: Liquid Transportation Fuel Production via Biomass-derived Oxygenated Intermediates Upgrading

This paper presents a comparative techno-economic analysis (TEA) of five conversion pathways from biomass to gasoline-, jet-, and diesel-range hydrocarbons via indirect liquefaction with specific focus on pathways utilizing oxygenated intermediates. The four emerging pathways of interest are compared with one conventional pathway (Fischer-Tropsch) for the production of the hydrocarbon blendstocks. The processing steps of the four emerging pathways include: biomass to syngas via indirect gasification, gas cleanup, conversion of syngas to alcohols/oxygenates followed by conversion of alcohols/oxygenates to hydrocarbon blendstocks via dehydration, oligomerization, and hydrogenation. Conversion of biomass-derived syngas to oxygenated intermediates occurs via three different pathways, producing: 1) mixed alcohols over a MoS2 catalyst, 2) mixed oxygenates (a mixture of C2+ oxygenated compounds, predominantly ethanol, acetic acid, acetaldehyde, ethyl acetate) using an Rh-based catalyst, and 3) ethanol from syngas fermentation. This is followed by the conversion of oxygenates/alcohols to fuel-range olefins in two approaches: 1) mixed alcohols/ethanol to 1-butanol rich mixture via Guerbet reaction, followed by alcohol dehydration, oligomerization, and hydrogenation, and 2) mixed oxygenates/ethanol to isobutene rich mixture and followed by oligomerization and hydrogenation. The design features a processing capacity of 2,000 tonnes/day (2,205 short tons) of dry biomass. The minimum fuel selling prices (MFSPs) for the four developing pathways range from $3.40 to $5.04 per gasoline-gallon equivalent (GGE), in 2011 US dollars. Sensitivity studies show that MFSPs can be improved with co-product credits and are comparable to the commercial Fischer-Tropsch benchmark ($3.58/GGE). Overall, this comparative TEA study documents potential economics for the developmental biofuel pathways via mixed oxygenates.

Tan, Eric C. D.↗

Rates of Water Exchange for Two Cobalt(II) Heteropolyoxotungstate Compounds in Aqueous Solution

Polyoxometalate ions are used as ligands in water-oxidation processes related to solar energy production. An important step in these reactions is the association and dissociation of water from the catalytic sites, the rates of which are unknown. Here we report the exchange rates of water ligated to Co II atoms in two polyoxotungstate sandwich molecules using the 17 O-NMR-based Swift–Connick method. The compounds were the [Co 4 (H 2 O) 2 (B-α-PW 9 O 34 ) 2 ] 10– and the larger αββα-[Co 4 (H 2 O) 2 (P 2 W 15 O 56 ) 2 ] 16– ions, each with two water molecules bound trans to one another in a Co II sandwich between the tungstate ligands. The clusters, in both solid and solution state, were characterized by a range of methods, including NMR, EPR, FT-IR, UV-Vis, and EXAFS spectroscopy, ESI-MS, single-crystal X-ray crystallography, and potentiometry. For [Co 4 (H 2 O) 2 (B-α-PW 9 O 34 ) 2 ] 10– at pH 5.4, we estimate: k 298 =1.5(5)±0.3×10 6 s –1 , ΔH ≠ =39.8±0.4 kJ mol –1 , ΔS ≠ =+7.1±1.2 J mol –1 K –1 and ΔV ≠ =5.6 ±1.6 cm 3 mol –1 . For the Wells–Dawson sandwich cluster (αββα-[Co 4 (H 2 O) 2 (P 2 W 15 O 56 ) 2 ] 16– ) at pH 5.54, we find: k 298 =1.6(2)±0.3×10 6 s –1 , ΔH ≠ =27.6±0.4 kJ mol –1 ΔS ≠ =–33±1.3 J mol –1 K –1 and ΔV ≠ =2.2±1.4 cm 3 mol –1 at pH 5.2. The molecules are clearly stable and monospecific in slightly acidic solutions, but dissociate in strongly acidic solutions. Furthermore, this dissociation is detectable by EPR spectroscopy as S=3/2 Co II species (such as the [Co(H 2 O) 6 ] 2+ monomer ion) and by the significant reduction of the Co–Co vector in the XAS spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Copper Causes Regiospecific Formation of C4F8-Containing Six-Membered Rings and their Defluorination/Aromatization to C4F4-Containing Rings in Triphenylene/1,4-C4F8I2 Reactions

The presence of Cu in reactions of triphenylene (TRPH) and 1,4-C4F8I2 at 360 °C led to regiospecific substitution of TRPH ortho C(β) atoms to form C4F8-containing rings, completely suppressing substitution on C(α) atoms. In addition, Cu caused selective reductive-defluorination/aromatization (RD/A) to form C4F4- containing aromatic rings. Without Cu, the reactions of TRPH and 1,4- C4F8I2 were not regiospecific and no RD/A was observed. These results, supported by DFT calculations, are the first examples of Cupromoted (i) regiospecific perfluoroannulation, (ii) preparative C–F activation, and (iii) RD/A. HPLC-purified products were characterized by X-ray diffraction, low-temperature PES, and 1H/19F NMR.

Environmental Molecular Sciences Laboratory↗

Making a Splash in Homogeneous CO2 Hydrogenation: Elucidating the Impact of Solvent on Catalytic Mechanisms

Molecular catalysts for hydrogenation of CO2 are widely studied as a means of chemical hydrogen storage. Catalysts are traditionally designed from the perspective of controlling the ligands bound to the metal. In recent years, studies have shown that the solvent can also play a key role in the mechanism of CO2 hydrogenation. A prominent example is the impact of the solvent on the thermodynamic hydride donor ability, or hydricity, of metal hydride complexes reletive to the hydride acceptor ability of CO2. In some cases, simply changing from an organic solvent to water can reverse the direction of hydride transfer between a metal hydride and CO2. Additionally, the solvent can impact catalysis by converting CO2 into carbonate species, as well as activate intermediate products for hydrogenation to more reduced products. By understanding the substrate and product speciation, as well as the reactivity of the catalyst towards the substrate, the solvent can be used as a central design component for the rational development of new catalytic systems. This research was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory is operated by Battelle for the U.S. Department of Energy.

carbon dioxide, homogeneous catalysis, solvent eff↗

Bis(1,2,4-oxadiazolyl) Furoxan: A Promising Melt-Castable Eutectic Material of Low Sensitivity

A scalable synthesis of bis(1,2,4-oxadiazoyl) furoxan, C 6 H 2 N 6 O 4 , its physical properties, and its theoretical performance values are described herein. Previous attempts to synthesize this compound required expensive reagents, and/or time-consuming synthesis processes and low overall yields. In addition to disclosing a streamlined synthesis of bis(1,2,4-oxadiazolyl) furoxan, we report its molecular configuration and crystal structure, as well as its correct melting point. Bis(1,2,4-oxadiazolyl) furoxan exhibits a very insensitive behavior to impact, friction, and electrostatic discharge, with a calculated detonation pressure 20 % higher than that of TNT. Given its physical properties and theoretical performance values, this material can be classified as a promising ingredient in the development of melt-castable eutectic technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗